This 8-12 t/h feed pellet line is suitable for processing various animal feeds, such as chicken feed, poultry feed, livestock feed, bird feed, duck feed, goose feed, cattle feed, sheep feed, camel feed, horse feed, pig feed, rabbit feed, fish feed, shrimp feed, crab feed, aquatic feed, etc. The main equipment of a complete 8-12T/H feed pellet production line includes a hammer mill machine, 8-12 t/h feed pellet making machine, single shaft screw mixer, counter-flow feed pellet cooler, pellet crumbler machine, box cylinder pulse dust remover, vibrating screen classifier, bucket elevator, automatic bagging system, etc. This complete feed pellet plant can accomplish raw material mixing, transmission, feeding, and pelletizing. After the raw materials become feed pellets, the following equipment can cool them down and pack them into bags. The animal feed pellet production line has good raw material versatility and can be used for the granulation of various raw materials such as corn, sorghum, wheat, beans, and oilseed meal. At the same time, the animal feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. At the same time, we provide free installation, training, factory design, and timely after-sales service.
This 13-18t/h feed pellet production line is suitable for processing various animal feeds, such as chicken feed, poultry feed, livestock feed, bird feed, duck feed, goose feed, cattle feed, sheep feed, camel feed, horse feed, pig feed, rabbit feed, fish feed, shrimp feed, crab feed, aquatic feed, etc. The main equipment of a complete 13-18t/h animal feed pellet production line includes a hammer mill machine, 13-18t/h feed pellet making machine, single shaft screw mixer, counter-flow feed pellet cooler, pellet crumbler machine, box cylinder pulse dust remover, vibrating screen classifier, bucket elevator, automatic bagging system, etc. This complete feed pellet plant can accomplish raw material mixing, transmission, feeding, and pelletizing. After the raw materials become feed pellets, the following equipment can cool them down and pack them into bags. The animal-feed pellet plant has good raw material versatility and can be used for the granulation of various raw materials such as corn, sorghum, wheat, beans, and oilseed meal. At the same time, the animal feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. At the same time, we provide free installation, training, factory design, and timely after-sales service.
Large scale high performance 20-30 t/h feed pellet plant is suitable for processing various animal feeds, such as chicken feed, poultry feed, livestock feed, bird feed, duck feed, goose feed, cattle feed, sheep feed, camel feed, horse feed, pig feed, rabbit feed, fish feed, shrimp feed, crab feed, aquatic feed, etc. The main equipment of a complete 20-30T/H animal feed pellet mill machine includes an animal feed grinder and feed mixer, feed pellet machine, counter-flow feed pellet cooler, pellet crumbler machine, box cylinder pulse dust remover, vibrating screen classifier, bucket elevator, automatic bagging system, electric control cabinet, etc. This complete feed pellet plant can accomplish raw material mixing, transmission, feeding, and pelletizing. After the raw materials become feed pellets, the following equipment can cool them down and pack them into bags. The animal-feed pellet plant has good raw material versatility and can be used for the granulation of various raw materials such as corn, sorghum, wheat, beans, and oilseed meal. At the same time, the animal feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. At the same time, we provide free installation, training, factory design, and timely after-sales service.
Large scale high quality 30-35t/h feed pellet plant is suitable for processing various animal feeds, such as chicken feed, poultry feed, livestock feed, bird feed, duck feed, goose feed, cattle feed, sheep feed, camel feed, horse feed, pig feed, rabbit feed, fish feed, shrimp feed, crab feed, aquatic feed, etc. The main equipment of a complete 30-35T/H animal feed pellet mill machine includes an animal feed grinder and feed mixer, feed pellet machine, counter-flow feed pellet cooler, pellet crumbler machine, box cylinder pulse dust remover, vibrating screen classifier, bucket elevator, automatic bagging system, electric control cabinet, etc. This complete feed pellet plant can accomplish raw material mixing, transmission, feeding, and pelletizing. After the raw materials become feed pellets, the following equipment can cool them down and pack them into bags. The animal-feed pellet plant has good raw material versatility and can be used for the granulation of various raw materials such as corn, sorghum, wheat, beans, and oilseed meal. At the same time, the animal feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. At the same time, we provide free installation, training, factory design, and timely after-sales service.
Technical Parameters Travel of X and Y Axes: 800x1200 mm; Maximum cutting thickness/ Maximum height of the part: 700 mm; Maximum Work piece weight: 1000 kg; Wire diameter: Standard 0.18 mm mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 985x1580 mm; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " . Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; No. of axes: 4 axes (X,Y,U,V) Maximum cutting speed: 160 square mm/min; Numerical Control System: X8 ; Motor power: 2.5 KW; Maximum processing current: 7 A; Maximum power consumption: less than 1 KVA; Minimum feed increment: 0.001 mm; Adjustable range of pulse width: 15-150 �¼s; Approx. Machine size (LxWxH): 2600x2400x1800 mm; Approx. Machine weight: 4500 kg; Approx. Machine control cabinet size: 670x630x1800 mm; Approx. Machine control cabinet weight: 200 kg; Operating system/CNC system/Software drawing system: X8 system is a total integrated system that includes CNC system, Operating system and Software drawing system. ; Menu language: Chinese and English ; The units of measurement does the system use: Metric ; Data port: USB port, RS 232C port, Ethernet port ; Operating room temperature: Normally is 5-40 , we suggest 10-20 â??. ;
Technical Parameters : Travel of X and Y Axes: 500x630 mm; Maximum cutting thickness/ Maximum height of the part: 600 mm; Maximum Work piece weight: 700 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 600x860x600 mm; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " . Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; No. of axes: 4 axes (X,Y,U,V) Maximum cutting speed: 150 square mm/min; Numerical Control System: X8 ; Motor power: 2.5 KW; Maximum processing current: 7 A; Maximum power consumption: less than 1 KVA; Minimum feed increment: 0.001 mm; Adjustable range of pulse width: 15-150; Approx. Machine size (LxWxH): 2000x1950x1750 mm; Approx. Machine weight: 2540 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg; Operating system/CNC system/Software drawing system: X8 system is a total integrated system that includes CNC system, Operating system and Software drawing system. ; Menu language: Chinese and English ; The units of measurement does the system use: Metric ; Data port: USB port, RS 232C port, Ethernet port ; Operating room temperature: Normally is 5-40 , we suggest 10-20 ;
Technical Parameters : Travel of X and Y Axes: 800x630 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1130x9500x300 mm; Maximum Work piece weight: 750 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2200x1650x1910 mm; Approx. Machine weight: 2980 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters: Travel of X and Y Axes: 630x500 mm; Maximum cutting thickness: 350 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 m mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1020x640x350 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 2180 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters Travel of X and Y Axes: 500x400 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 850x540x300 mm; Maximum Work piece weight: 450 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 1790 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters Travel of X and Y Axes: 400x320 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 620x480x300 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1700x1300x2160 mm; Approx. Machine weight: 1480 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 800x630 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1130x9500x300 mm; Maximum Work piece weight: 750 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2200x1650x1910 mm; Approx. Machine weight: 3000 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 630x500 mm; Maximum cutting thickness: 350 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 m mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1020x640x350 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 2200 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 500x400 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 850x540x300 mm; Maximum Work piece weight: 450 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 1800 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 400x320 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 620x480x300 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1700x1300x2160 mm; Approx. Machine weight: 1500 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Automatic Stirrup Bending Machine Works With Raw Metarial Coil Type of Wire Ribbed & Smooth Production Capacity (mm) Singlewire: 10-12 / Doublewire: 6-8 Max. Bending Opportunity CW and CCW/Birectional Rated Power 2 Servomotor 7,5 + 5,5 KW Driving Motor 7,5 KW (servo motor) Bending Motor Power 5,5 KW (servo motor) Length Tolerance ± 1 mm Bending Tolerance ± 1 Driving Speed 90m/minutes Bending Speed 1200 / sec. Pre-Strainghtening Unit X and Y Axis With multiple rollers Control Unit Operator sensitive/friendly program, Shapes can be easily created helping with angles and length by operator. The program was written by Sew engineers. Driving Unit Industrial type gearbox by EMPO Bending Unit Industrial type gearbox by EMPO Cutting Heav type industrial gear box Averageair - compressed consumption 6H/min Average - electric power consumption 4-6/Kw/h Compressor Needed 200lt/min Working Pressure (bar) 6 Bar Voltage 380v-50Hz-3Fhaze Switch - Sensors Proximith Switches Encoder 1024 Pulse/Sick Brand Driving Gear Box 2379 Grade With Heat Treatment Control Panel Type LCD 18 Machine Dimensions (W x L x H) 1500mm x 4600mm x 1900mm Machine Weight 2700 Kg Control Program Language TR, ENG, FR, ARAB
Automatic Stirrup Bending Machine Works With Raw Metarial Coil Type of Wire Ribbed & Smooth Production Capacity (mm) Singlewire: CW/Birectional Rated Power 2 Servomotor 7,5 + 5,5 KW Driving Motor 7,5 KW (servo motor) Bending Motor Power 5,5 KW (servo motor) Length Tolerance ± 1 mm Bending Tolerance ± 1 Driving Speed 90m/minutes Bending Speed 1200 / sec. Pre-Strainghtening Unit X and Y Axis With multiple rollers Control Unit Operator sensitive/friendly program, Shapes can be easily created helping with angles and length by operator. The program was written by Sew engineers. Driving Unit Industrial type gearbox by EMPO Bending Unit Industrial type gearbox by EMPO Cutting Heav type industrial gear box Averageair - compressed consumption 6H/min Average - electric power consumption 4-6/Kw/h Compressor Needed 200lt/min Working Pressure (bar) 6 Bar Voltage 380v-50Hz-3Fhaze Switch - Sensors Proximith Switches Encoder 1024 Pulse/Sick Brand Driving Gear Box 2379 Grade With Heat Treatment Control Panel Type LCD 18 Machine Dimensions (W x L x H) 1500mm x 4600mm x 1900mm Machine Weight 2700 Kg Control Program Language TR, ENG, FR, ARAB
Aczet's Forza 160 is a jewelry welding machine which is widely used in jewelry industry for welding purposes. It can weld precious metals such as gold, silver, platinum and various other metals. Technology: The new digital microprocessor incorporated in the this works 100 times faster than traditional systems. It can measure the high energy precisely, analyzing it and sampling it every 100 microseconds. This makes welder Forza 160, a powerful machine while at the same time constant and very precise in the repetition of the shots. Features: One of its most prominent features is the real-time and automatic regulations on the power supply which helps it in efficient working. Its double light LCD touch screen shutter and automatic control of the laser lamp, with consequent automatic adjustment of the energy. It has an integrated webcam in it. It has a cooling chamber & an efficient air cooling system. It has 6 preset pulse shaping programs. The argon gas nozzle is present directly to the welding point and air nozzle for cooling pieces in the working chamber. For the chamber cleaning, it has an extractable drawer. Low noise and low maintenance 100 memory parameters are there in the device. It comprises of frontal and big doors and optional on-board LIVE video camera in it. Laser Application: It can easily weld precious as well as non-precious metals including platinum, titanium, gold, silver, and palladium. Old Jewelry can also be repaired perfectly. It repairs molding without removing the stones and welds the elements using weld materials and leaves them clear, sharp, and without the need to clean again. It can even repair casting defects such as porosity or breakages by simply welding those areas with solder wire. It is highly suitable for high-productive cycles. Welding Functions: It can repair scratches and casting defects. It can also do a reconstruction of stones setting and welding of broken rings and jewelry joints. It can perform welding of pins.
Product Description A unique blend of both a pour-over dripper and an automatic coffee maker, the Chemex Ottomatic allows you to brew consistent high quality coffee quickly and efficiently. The Ottomatic brews with Chemex's proprietary "Greedy Cup" shower head. The brew cycle is staged to account for pre-infusion, contact time between water and coffee, even wetting of the grounds, and consistent temperature between 197.6F - 204.8F. The Ottomatic comes packaged with a 6-Cup Chemex Classic coffee maker and is compatible for use with any of their 3, 5, 6, and 8 cup drippers. In addition to the Chemex Classic, each machine is packaged with a pack of Chemex Bonded Filters, a glass coffee maker cover, and a bottle of Chemex Coffee Maker Cleaner. Dimensions: 11" D x 7.5" W x 11.5" H Dimensions 11" D x 7.5" W x 11.5" H Brewing Features In adherence with industry standards, the Chemex Ottomatic dispenses water between 197.6F - 204.8F and between16oz - 40oz. When you're finished brewing, a hot plate will keep your coffee at ideal serving temperature without burning it. Fits All 3, 5, 6, and 8 Cup Chemex Coffee Makers All but the very largest Chemex Coffee makers are compatible for use with the Ottomatic. When brewing, simply fill the reservoir to the line that corresponds with the size of your coffee maker (3, 5, 6, 8) and place your coffee maker under the shower head. Each Ottomatic comes packaged with a 6-Cup Chemex Classic series coffee maker so you don't need to purchase additional equipment to start brewing. "Greedy Cup" Sprayhead Technology The Ottomatic brews using the Chemex's proprietary "Greedy Cup" shower head for a staged brewing cycle. The pulsing water event wets the entire bed of coffee for an even extraction while maintaining consistent temperature during extraction from start to finish. Included Accessories Each Chemex Ottomatic comes packaged with the following accessories: Small Pack of Chemex Bonded Filters Glass Coffee Maker Cover Chemex Coffee Maker Cleaner
Even in a very noisy environment, Model-139B still has the ability to determine quickly and precisely the positive and negative polarity of a loudspeaker headphone receiver and every single unit in a loudspeaker system. Model-139B also includes 3 sets of external input terminal and selector which can be used to combine with other instruments, in order to measure the other features of a loudspeaker simultaneously. It is quite suitable for 100% Q.C. testing for loudspeakers in the production line. Loudspeaker Polarity Tester 139B Technical specification: (1) Pulse measuring method. (2) Polarity indicator : (a) Green indicator: Positive polarity with beep sound. (b) Red indicator: Negative polarity with no sound at all. (3) Five touch switches : (a) WF range: Suitable for measuring the polarity of the woofer. (b) M & T range: Suitable for measuring the polarity of midrange and tweeter. (c) EXT.1 to EXT.3: Used to select the instrument connected to the external input terminal. (4) Model-139B can be connected with Model-7116C, to measure the buzz, and rattle of a loudspeaker. Only one operator is needed. (5) Measuring distance: 2 to 4 Cm. from the center point. of the dust cover of the pre-measure loudspeaker. (6) Measuring sensor: Uses ECM. (7) Dimension ( m / m ): 85 ( height ) x 205 ( width ) x 280 ( depth ). (8) Weight: 2.3 Kg. SUNLIGHT AUDIO SWEEPER 7116C Loudspeaker Polarity Tester 139B NOISE GENERATOR 8121C GAUSS METER 138 IMPEDANCE METER 152A DIGITAL HIGH-SPEED Fo METER 7117 C.
Triacs Belong To The Thyristor Family And Are Closely Related To Silicon-Controlled Rectifiers (Scr). However, Unlike Scrs, Which Are Unidirectional Devices (I.E. Can Conduct Current Only In One Direction), Triacs Are Bidirectional And So Current Can Flow Through Them In Either Direction. Another Difference From Scrs Is That Triacs Can Be Triggered By Either A Positive Or A Negative Current Applied To Its Gate Electrode, Whereas Scrs Can Be Triggered Only By Currents Going Into The Gate. In Order To Create A Triggering Current, A Positive Or Negative Voltage Has To Be Applied To The Gate With Respect To The A1 Terminal (Otherwise Known As Mt1). Once Triggered, The Device Continues To Conduct Until The Current Drops Below A Certain Threshold, Called The Holding Current. The Bidirectionality Makes Triac Very Convenient Switches For Ac Circuits, Also Allowing Them To Control Very Large Power Flows With Milliampere-Scale Gate Currents. In Addition, Applying A Trigger Pulse At A Controlled Phase Angle In An Ac Cycle Allows One To Control The Percentage Of Current That Flows Through The Triac To The Load (Phase Control), Which Is Commonly Used, For Example, In Controlling The Speed Of Low-Power Induction Motors, In Dimming Lamps And In Controlling Ac Heating Resistors Two Modes Of Led Panel Light Dimming: Mobile App Based Dimming- The Customer Sitting In Any Part Of The Room/ House Can Control The Intensity Of The Light By Using His Mobile App The Manual Mode Facilitates Control By Varying The Triac Manually Through The Knob Provided In The Control Unit. Optional: Wifi App Based Dimming Occupancy Based Dimming