PET stands for polyethylene terephthalate, a plastic resin and a form of polyester. Polyethylene terephthalate is a polymer that is formed by combining two monomers called modified ethylene glycol and purified terephthalic acid. PET is the type of plastic labeled with the #1 code on or near the bottom of bottles and containers and is commonly used to carry soft drinks, water, juice, peanut butter, salad dressings, oil, cosmetics and household cleaners. Manufacturers use PET plastic to package products because of its strength, thermo-stability and transparency. Customers choose PET because it is inexpensive, lightweight, resealable, shatter-resistant and recyclable. Recycled polyethylene terephthalate (RPET) can be used to make many new products, including fiber for polyester carpet; fabric for T-shirts, long underwear, athletic shoes, luggage, upholstery and sweaters; fiberfill for sleeping bags and winter coats; industrial strapping, sheet and film; automotive parts, such as luggage racks, headliners, fuse boxes, bumpers, grilles and door panels; and new PET containers for both food and non-food products. PET Bottle Scrap / PET Flakes / Hot Washed / Factory Low Price Internal Viscosity: Above 0.69 Bulk Density: 18 LBS per FT3 Flake Size: 10mm â?? 12mm Screen Size: 12 mm Polyvinyl Chloride content: Below 150 particles per million Non-PET / Paper content: Below 60 particles per million Rubber / Stone / Wood / Alum content: Below 30 particles per million Moisture content: Below 1.0% Ash content: Below 0.05% We deal in various Plastic Scraps of different types, including: PET Scrap (PET Bottle Scrap, PET Flakes, PET Preform Scrap, PET Strapping Scrap, PET Lump Scrap) ABS Plastic Scrap Polycarbonate Scrap HIPS Cup Scrap HDPE Scrap (HDPE Mix Bottle Scrap, HDPE Mix Bottle Scrap Regrind, HDPE Blue Drum Scrap, HDPE Blue Drum Scrap Regrind, HDPE Milk Bottle Scrap, HDPE Milk Bottle Scrap Regrind) LDPE Film Scrap ( LDPE Film Scrap in Bales, LDPE Film Scrap in Rolls) XLPE Cross Link Cables Scrap PVC Scrap: (PVC Cable Scrap, PVC Cable Scrap Regrind, PVC Window Scrap PVC Pipe Scrap PP Regrind Scrap PP Car Bumper Scrap Plastic Roll Scrap EPS Block Scrap Butyl Rubber Tube Scrap Used Conveyor Belts PU Foam Scrap Rebonded Foam BOPP Film Scrap PMMA Scrap (Acrylic). Kindly contact us for more details with your email and order quantity
PET stands for polyethylene terephthalate, a plastic resin and a form of polyester. Polyethylene terephthalate is a polymer that is formed by combining two monomers called modified ethylene glycol and purified terephthalic acid. PET is the type of plastic labeled with the #1 code on or near the bottom of bottles and containers and is commonly used to carry soft drinks, water, juice, peanut butter, salad dressings, oil, cosmetics and household cleaners. Manufacturers use PET plastic to package products because of its strength, thermo-stability and transparency. Customers choose PET because it is inexpensive, lightweight, resealable, shatter-resistant and recyclable. Recycled polyethylene terephthalate (RPET) can be used to make many new products, including fiber for polyester carpet; fabric for T-shirts, long underwear, athletic shoes, luggage, upholstery and sweaters; fiberfill for sleeping bags and winter coats; industrial strapping, sheet and film; automotive parts, such as luggage racks, headliners, fuse boxes, bumpers, grilles and door panels; and new PET containers for both food and non-food products. PET Bottle Scrap / PET Flakes / Hot Washed / Factory Low Price Internal Viscosity: Above 0.69 Bulk Density: 18 LBS per FT3 Flake Size: 10mm â?? 12mm Screen Size: 12 mm Polyvinyl Chloride content: Below 150 particles per million Non-PET / Paper content: Below 60 particles per million Rubber / Stone / Wood / Alum content: Below 30 particles per million Moisture content: Below 1.0% Ash content: Below 0.05% We deal in various Plastic Scraps of different types, including: PET Scrap (PET Bottle Scrap, PET Flakes, PET Preform Scrap, PET Strapping Scrap, PET Lump Scrap) ABS Plastic Scrap Polycarbonate Scrap HIPS Cup Scrap HDPE Scrap (HDPE Mix Bottle Scrap, HDPE Mix Bottle Scrap Regrind, HDPE Blue Drum Scrap, HDPE Blue Drum Scrap Regrind, HDPE Milk Bottle Scrap, HDPE Milk Bottle Scrap Regrind) LDPE Film Scrap ( LDPE Film Scrap in Bales, LDPE Film Scrap in Rolls) XLPE Cross Link Cables Scrap PVC Scrap: (PVC Cable Scrap, PVC Cable Scrap Regrind, PVC Window Scrap PVC Pipe Scrap PP Regrind Scrap PP Car Bumper Scrap Plastic Roll Scrap EPS Block Scrap Butyl Rubber Tube Scrap Used Conveyor Belts PU Foam Scrap Rebonded Foam BOPP Film Scrap PMMA Scrap (Acrylic). Kindly contact us for more details with your email and order quantity
PET stands for polyethylene terephthalate, a plastic resin and a form of polyester. Polyethylene terephthalate is a polymer that is formed by combining two monomers called modified ethylene glycol and purified terephthalic acid. PET is the type of plastic labeled with the #1 code on or near the bottom of bottles and containers and is commonly used to carry soft drinks, water, juice, peanut butter, salad dressings, oil, cosmetics and household cleaners. Manufacturers use PET plastic to package products because of its strength, thermo-stability and transparency. Customers choose PET because it is inexpensive, lightweight, resealable, shatter-resistant and recyclable. Recycled polyethylene terephthalate (RPET) can be used to make many new products, including fiber for polyester carpet; fabric for T-shirts, long underwear, athletic shoes, luggage, upholstery and sweaters; fiberfill for sleeping bags and winter coats; industrial strapping, sheet and film; automotive parts, such as luggage racks, headliners, fuse boxes, bumpers, grilles and door panels; and new PET containers for both food and non-food products. PET Bottle Scrap / PET Flakes / Hot Washed / Factory Low Price Internal Viscosity: Above 0.69 Bulk Density: 18 LBS per FT3 Flake Size: 10mm 12mm Screen Size: 12 mm Polyvinyl Chloride content: Below 150 particles per million Non-PET / Paper content: Below 60 particles per million Rubber / Stone / Wood / Alum content: Below 30 particles per million Moisture content: Below 1.0% Ash content: Below 0.05% We deal in various Plastic Scraps of different types, including: PET Scrap (PET Bottle Scrap, PET Flakes, PET Preform Scrap, PET Strapping Scrap, PET Lump Scrap) ABS Plastic Scrap Polycarbonate Scrap HIPS Cup Scrap HDPE Scrap (HDPE Mix Bottle Scrap, HDPE Mix Bottle Scrap Regrind, HDPE Blue Drum Scrap, HDPE Blue Drum Scrap Regrind, HDPE Milk Bottle Scrap, HDPE Milk Bottle Scrap Regrind) LDPE Film Scrap ( LDPE Film Scrap in Bales, LDPE Film Scrap in Rolls) XLPE Cross Link Cables Scrap PVC Scrap: (PVC Cable Scrap, PVC Cable Scrap Regrind, PVC Window Scrap PVC Pipe Scrap PP Regrind Scrap PP Car Bumper Scrap Plastic Roll Scrap EPS Block Scrap Butyl Rubber Tube Scrap Used Conveyor Belts PU Foam Scrap Rebonded Foam BOPP Film Scrap PMMA Scrap (Acrylic). Kindly contact us for more details with your email and order quantity
Hydroxyl Modified Vinyl Chloride/Vinyl Acetate Terpolymers PG-HC Hydroxyl-Modified Vinyl Chloride/Vinyl Acetate Terpolymers Hydroxyl Modified Vinyl Chloride, Hydroxyl Modified Vinyl Acetate Terpolymers New grade PG-HC: It is white powder,ester soluble with colorless& transparent solution and has excellent solvent release,film-forming compactness,dispersibility,which mainly is used for combination with PU resin to improve flexibility,solvent release,film-forming compactness and hardness in coatings and ink;It is very good film-forming substance with low swelling property and low gas permeability when its paint film meet water, after its combination use with PU resin etc, its paint film has excellent flexibility,high-wearing feature,scratch resistance,water resistance,alcohol resistance. PG-HC Vinyl Resin Quality standard (XHQB-10) No. Item Index Test method 1 Appearance White powder By visual 2 Whiteness 80 GB2913-82 3 Composition % by Wt Vinyl Chloride 84±1% GB/T7139-2002 Vinyl Acetate 10±1% ISO1159-1978. Vinyl Alcohol 6±0.5% 4 Reactive Functionality (Hydroxyl %) 1.8-2.3% 5 Hydroxyl Value 70-76 ISO2554-1974 6 K Value 48-50 GB/T 3401-2007 7 Viscosity No. ml/g 54-58 GB/T 3401-2007 8 Glass transition Temp About 62 GB11998-89 9 Average Molecular Wt About 30000 Calculated by the Viscosity No. 10 % by wt, through 60 mesh 100% GB/T6003.1 11 Apparent density (g/ml) 0.5 GB20022-2005 12 Volatilization (%) 1% GB/T2914-1999 13 Impurity Particle No. /100g 20 GB9348-88 14 20% resin in EA or MEK Colorless and Transparent or Yellowish By visual Application: PG-HC new grade is mainly used for application gravure plastics composite printing inks,wood coatings( e.g: matte coating,topcoat gloss etc),UV primer,PE primer etc. Package, storage and transportation: * In kraft bag, lined with pp bags of 25kgs net, with PE inner bag. *Store in a dry and ventilated place, do not place in open-air, avoid storage in direct sunlight and caution against wet. *Must be transported in clean vehicle with awning and keep away from moisture. * It is NOT hazardous article, and the shelf life is one year from the production date.
Hydroxyl Modified Vinyl Chloride/Vinyl Acetate Terpolymers MTA5R Hydroxyl-Modified Vinyl Chloride/Vinyl Acetate Terpolymers Hydroxyl Modified Vinyl Chloride, Vinyl Chloride and Vinyl Acetate Copolymers, Carboxyl-Modified Vinyl Chloride New grade MTA5R: It is white powder,ester soluble with colorless and transparent solution, and it has excellent solvent release,film-forming,dispersibility,color contrast property and wettability, moreover, it has more excellent ester soluble character and intermiscibility,lower viscosity and best dispersibility in pigment and magnetic powder, which can completely replace TA5R grade of Nissin... MTA5R Vinyl Resin Quality standard (XHQB-10). No. Item Index Test method 1 Appearance White powder By visual 2 Whiteness 70 GB2913-82 3 Composition % by Wt Vinyl Chloride 88±1% GB/T7139-2002 Vinyl Acetate 1±1% ISO1159-1978 Vinyl Alcohol 11±0.5% 4 Reactive Functionality (Hydroxyl %) 3.8-4.2% 5 K Value 40-42 GB/T 3401-2007 6 Viscosity No. ml/g 40-44 GB/T 3401-2007 7 Glass transition Temp About 78 GB11998-89 8 Average Molecular Wt About 27000. Calculated by the Viscosity No. 9 % by wt, through 60 mesh 100% GB/T6003.1. 10 Apparent density (g/ml) 0.5 GB20022-2005 11 Volatilization (%) 1% GB/T2914-1999 12 Impurity Particle No. /100g 20 GB9348-88 13 20% resin in EA or MEK Colorless and Transparent or Yellowish By visual Application: MTA5Rnew grade is mainly used for application gravure plastics composite printing inks,can sealed coatings,PU inks,car refinishing paint,screen printing ink,chassis paints etc. Package, storage and transportation: * In kraft bag, lined with pp bags of 25kgs net, with PE inner bag. * Store in a dry and ventilated place, do not place in open-air, avoid storage in direct sunlight and caution against wet. * Must be transported in clean vehicle with awning and keep away from moisture. * It is NOT hazardous article, and the shelf life is one year from the production date.
Hydroxyl Modified Vinyl Chloride/Vinyl Acetate Terpolymers MVAD Hydroxyl-Modified Vinyl Chloride/Vinyl Acetate Terpolymers Hydroxyl Modified Vinyl Chloride, Hydroxyl Modified Vinyl Acetate Terpolymers Grade MVAD: It is white powder, ketone soluble with colorless, transparent solution and has excellent adhesion on PET, resin primer, paper, PVC, ABS pre-treatment of PE and OPP. It is often used with other film-forming material in order to improve the coating performance, and enhance paint adhesion,flexibility,tenacity,hardness and chemical resistance. The hydroxyl functional group permits crosslinking reactions for thermoset,obtaining excellent chemical and water resistance. MVAD Vinyl Resin Quality standard (XHQB-10). No. Item Index Test method 1 Appearance White powder By visual 2 Whiteness 80 GB2913-82 3 Composition % by Wt Vinyl Chloride 90±1% GB/T7139-2002 Vinyl Acetate 4±1% ISO1159-1978 Vinyl Alcohol 6±0.5% 4 Reactive Functionality (Hydroxyl %) 1.6-2.0% 5 Hydroxyl Value 50-60. 6 K Value 36-38 GB/T 3401-2007 7 Viscosity No. ml/g 34-38 GB/T 3401-2007 8 Average Molecular Wt About 22000 Calculated by the Viscosity No. 9 % by wt, through 60 mesh 100%. GB/T6003.1 10 Apparent density (g/ml) 0.5 GB20022-2005 11 Volatilization (%) 1% GB/T2914-1999 12 Impurity Particle No. /100g 20 GB9348-88 13 25% resin in MEK/Toluene(50/50) Colorless or yellowish and Transparent By visual Application: MVAD grade can be used for a wide range of coatings applications, including marine anti-corrosion paint gravure printing inks, chassis paints, maintenance, PU and wood finishes, paper coatings, PET inks, interbedded adhesive, adhesive for magnetic tape and carbon ribbon. Package, storage and transportation: * In kraft bag, lined with pp bags of 25kgs net, with PE inner bag. * Store in a dry and ventilated place, do not place in open-air, avoid storage in direct sunlight and caution against wet. * Must be transported in clean vehicle with awning and keep away from moisture. * It is NOT hazardous article, and the shelf life is one year from the production date.
Grade E1 Â for PET Sheet and PET Bottle Application (Injection and Extrusion Process) r-PET Flakes Specification r-PET Flakes Grade E1 / Product Code BC-003 / for PET Sheet and Erema r-PET Chips Specification Values Color Transparent Blue 80 % + Clear 20% Delivery Form Flakes Mechanical Characteristic Specification Values Unit Test Method Flakes sized < 12.5 Mm EN-15348:2007 Annex-A Bulk Density 300 +/- 50 kg/m3 ISO-12418-2 Annex-E Physical / Chemical Characteristic Specification Values Unit Test Method Moisture < 1 % EN-15348:2007 Annex-A Specific Weight ~ 1.35 g/cm3 EN-15348:2007 Annex-C Purity Values Specification Values Unit Test Method PVC 0 to 50 ppm EN-15348:2007 Annex-D Yellowish Flakes 0 to 10 ppm EN-15348:2007 Annex-D Glue 0 to 10 ppm EN-15348:2007 Annex-D Metal 0 ppm EN-15348:2007 Annex-D Other Color ( Opaque Flakes ) 0 to 10 ppm EN-15348:2007 Annex-D Polyolefin 0 to 10 ppm EN-15348:2007 Annex-D Other Polymer (PET-G, A-PET etc.) 0 to 10 ppm EN-15348:2007 Annex-D Organic 0 to 50 ppm EN-15348:2007 Annex-D Packaging Quantity Bulk PP Bag (95 x 95 x 250 cm) approximate 950 +/- 100 Kgs Note : Value will vary upon Sales Department Request and Special Approval
Hydroxypropyl methyl cellulose Hs code:3912, 900 Cas:9004-65-3 Hydroxypropyl methyl cellulose is a kind of white or slightly yellowish powder, odorless, tasteless, and non-toxic. The product can be dissolved in cold water to form a transparent viscous solution. The aqueous solution of this product has surface activity so that it has emulsification, protective colloids and relative stability. Ph stability: the aqueous solution viscosity of this product is relatively stable in the range of ph 3.0â??11.0. As the product is non-ionic, and in the preparation process can be effectively purified by washing with hot water, it has a very low ash content. Hydroxypropyl methylcellulose products can fully meet the standards for use of medicine, food, construction and personal care products. Specifications Specification 60 (e) 65 (f) 75 (k) Gelling temperature (â??) 58-64 62-68 70-90 Methoxy (wt%) 28.0-30.0 27.0-30.0 19.0-24.0 Hydroxypropoxy (wt%) 7.5-12.0 4.0-7.5 4.0-12.0 Viscosity(cps) 3; 5; 6; 15; 50; 400; 4000; 10000; 20000; 30000; 40000; 50000; 100, 000 150, 000;200, 000 Physical and chemical properties *particle size:98.5% passes through 100 mesh; 100% passes through 80 mesh. *charring temperature: 280-300â??. *bulk density: 0.25-0.70 g/cm3 (usually around 0.5 g/cm3 ) *real specific gravity:1.26-1.31. *browning temperature: 190-200â??. Surface tension:(2% water solution) 42-56dyn.Cm. *properties: dissolved in water and some organic solvent such as ethanol. Propyl alcohol. Ethylene chloride, the water solution is of surface activity. It is a nonionic surface active agent. Gelation temperature is different for different grades. For example, among 60rt hydroxypropyl methylcellulose, 60 is gelation temperature, namely, 2% water solution will form gelation at 60%.
Dimer acid dimer acid hydrogenated dimer acid suppliers Description Dimer acids (dimerized fatty acids) are dicarboxylic acids produced by dimerizing unsaturated fatty acids obtained from tall oil, oleic acid, canola oil or cottonseed oil, usually on clay catalysts. Dimer acids are light yellow transparent viscous liquids Advantage Non-toxic and harmless, no sulfur, no aromatics, no benzene, no heavy metals, easy degradation, no residue. It is an environmentally friendly green organic intermediate. Technical index Item Unit Specification SJ-A99 Appearance / Yellowish oily liquid Pass Color(Fe-Co) Gardner 10max 7 Acid value MgKOH/g 190-202 196.2 Saponification value MgKOH/g 192-202 198.5 Viscosity Mm2/s 6600-7500 7400 Monnmer acid % 4 max 3.1 Dimer acid % 77-83 81.5 Trimer acid % 17max 15.4 phosphorus ppm 10max - Iron ppm 1max - Application Dimer acids can be used to synthesize polyamide resins and hot melt adhesives. They are also used in alkyd resins, adhesives, surfactants, fuel oil additives and lubricants. Package 1) 200L drums 2) 1000L IBC Tank 3) 24 CBM Flexitank 4) 25 CBM ISO Tank Sega is one of the leading eco-friendly bio base materials manufacturers. Our Non-phthalate solvent, ethyl oleate usp and triacetin has high quality and competitive price. For more information about environment-friendly plasticizer, please click here to visit our website.
Fine-pored Silica Gel ( type A ) :: Characteristics :: transparent or translucent glass-like pellet or lump. average pore diameter:2.0-3.0 rim . specific surface area: 650-800 m2/g pore volume : 0.35-0.45 ml/g. specific heat : 0.92 KJ/kg. thermal conductivity: 0.63 KJ/m.hr. :: Use :: Mainly used for drying and moistureproof, may also be used as catalyst carriers, absorbents, separators and variable-pressure absorbents, etc :: Technical Data :: ITEM Specifications Typical values Superior class First class Qualified class Adsorption capacity RH=20%,% â?¥ 8.0 7.0 6.0 11.2 RH=50%,% â?¥ 20.0 19.0 18.0 29.2 RH=90%,% â?¥ 30.0 29.0 28.0 37.6 Loss on heating % â?¤ 2.0 4.0 6.0 1.0 PHOL 4-8 -- -- 4 Specific resistance s,.cm â?¥ 3000 -- -- 5630 Silica % â?¥ 98 -- -- 98.5 Qualified ratic of spherical granules % â?¥ 82 -- -- 90 Size * * * 2-5mm Bulk density g/L * * * 784 Note: qualified ratio of spherical granules is only applicable to fine-pored silica gel :: Size :: 0.5-1.5mm . 0.5-1mm . 2-4mm . 2-5mm . 4-8mm. :: Packing :: 25 kg per bag or 500 kg per bag,net. :: Note :: The moisture content, packing and size may be customized per your specific requirements.
Carboxyl-Modified Vinyl Chloride/Vinyl Acetate Copolymers VAMA Carboxyl-Modified Vinyl Chloride/Vinyl Acetate Terpolymers Ink Raw Material Vinyl Chloride Copolymer Resin, Vinyl copolymer resin for printing ink, Vinyl chloride vinyl acetate copolymer Grade VAMA: It is white powder, ketone soluble with colorless, transparent solution, and because of the carboxyl functional group,it has excellent adhesion on metal,especially on aluminum foil,the resin foil also has a good adhesion on PVC,ABS,paper,textiles,beton,etc.At the same time, it also has good water resistance, excellent oil, ester, acid, alkali and salt water solution resistance. VAMA Vinyl Resin Quality standard (XHQB-6). No. Item Index Test method 1 Appearance White powder By visual 2 Whiteness 80 GB2913-82 3 Composition % by Wt Vinyl Chloride 86±1% GB/T7139-2002 Vinyl Acetate 13±1% ISO1159-1978 Maleic Acid 1±0.2% 4 Reactive Functionality (Carboxyl %) 1±0.2% 5 K Value 45-47 GB/T 3401-2007 6 Viscosity No. ml/g 50-54 GB/T 3401-2007 7 Glass Transition Temp About 74. GB11998-89 8 Average Molecular Wt About 27000 Calculated by the Viscosity No. 9 % by wt, through 60 mesh 100%. GB/T6003.1 10 Apparent density (g/ml) 0.5 GB20022-2005 11 Volatilization (%) 1% GB/T2914-1999 12 Impurity Particle No. /100g 20 GB9348-88 13 25% resin in MEK/Toluene(50/50) Colorless and Transparent or yellowish By visual Application: VAMA grade is used primarily for air-dry finishes, such as maintenance, marine and metal coatings, aluminum foil varnish,cans sealed paint,shoe adhesive,floor paint,cement paint,silk screen printing and transfer ink. And it often mixes with LC-40 grade, which is used in the production of heat sealing packaging coatings, can effectively reduce the heat sealing temperature, raise the heat sealing strength. It also can be used to produce the VC sealing plastic package, Electro-chemical aluminum paint, thermal transfer adhesive. Package, storage and transportation: * In kraft bag, lined with pp bags of 25kgs net, with PE inner bag. * Store in a dry and ventilated place, do not place in open-air, avoid storage in direct sunlight and caution against wet. * Must be transported in clean vehicle with awning and keep away from moisture. * It is NOT hazardous article, and the shelf life is one year from the production date. Application: HVAMA is used primarily for air-dry finishes,such as maintenance,marine and metal coating,cans sealed paint,wood and glass coating,metal inks,adhesive for binder nail,etc. Package, storage and transportation: * In kraft bag, lined with pp bags of 25kgs net, with PE inner bag. * Store in a dry and ventilated place, do not place in open-air, avoid storage in direct sunlight and caution against wet. * Must be transported in clean vehicle with awning and keep away from moisture. * It is NOT hazardous article, and the shelf life is one year from the production date.
XLPE, LSHF PVC compound making machine with Two Stages extruder Typical Features First stage is GL series co-rotating twin-screw mixer,using twin-screw high speed, high shear and strong hybrid advantage,makes material fully plasticized and mixed. Second stage is SJ series single screw extruder. The characteristics of low speed and deep groove provide low shear processing environment, and coupled with barrel cooling, prevent the plasticised material from overheating decomposition phenomenon during high-pressure extrusion. Applies to : All kinds of heat-sensitive materials processing, such as PVC,XLPE, LSHF low smoke zero halogen flame retardant cable, shielding material etc. Application for two stages extruders pelletizing machine (cascade extruders) 1. Plastic recycling: PP plastic bags recycling, PE film recycling 2. Cable material:PVC cable, PVC transparent bottle material, LDPE/HDPE/LLDPE crosslinked cable material 3. Anti-flame(flame retardant) masterbatch: LSHF PP/ABS/PS/EVA/PA+Mg(OH)2(magnesium hydroxide)/Al2(OH)3 (aluminum hydroxide) 1. Q: How about Gongle Rubber &Plastic Machinery Co., Ltd. ? A: Jiangsu Gongle Rubber&Plastic Machinery Co., Ltd. is a factory and also a company. We are specialized in this field for more than 30 years. At the same time we manufacture screw elements and barrel in our own factory. 2. Q: How long is the guarantee? A: 12 months guarantee will be effective from the date of commissioning or 15 months from delivery. 3. Q: Where is your factory located? How can I visit there? A: Our factory is located in Suzhou, Jiangsu Province, China,which is quite near Shanghai Airport All our clients, from domestic or abroad, are warmly welcome to visit us! 4. How about after-service? We do provide life-long technical consultancy and spare parts. Cost-free direction installation. Normally like Turkey, Thailand, USA etc, we go there for exhibition, at the same time we will visit customers factory for machine troubleshooting and maintenance
XLPE, LSHF PVC compound making machine with Two Stages extruder Typical Features First stage is GL series co-rotating twin-screw mixer,using twin-screw high speed, high shear and strong hybrid advantage,makes material fully plasticized and mixed. Second stage is SJ series single screw extruder. The characteristics of low speed and deep groove provide low shear processing environment, and coupled with barrel cooling, prevent the plasticised material from overheating decomposition phenomenon during high-pressure extrusion. Applies to : All kinds of heat-sensitive materials processing, such as PVC,XLPE, LSHF low smoke zero halogen flame retardant cable, shielding material etc. Application for two stages extruders pelletizing machine (cascade extruders) 1. Plastic recycling: PP plastic bags recycling, PE film recycling 2. Cable material:PVC cable, PVC transparent bottle material, LDPE/HDPE/LLDPE crosslinked cable material 3. Anti-flame(flame retardant) masterbatch: LSHF PP/ABS/PS/EVA/PA+Mg(OH)2(magnesium hydroxide)/Al2(OH)3 (aluminum hydroxide) 1. Q: How about Gongle Rubber &Plastic Machinery Co., Ltd. ? A: Jiangsu Gongle Rubber&Plastic Machinery Co., Ltd. is a factory and also a company. We are specialized in this field for more than 30 years. At the same time we manufacture screw elements and barrel in our own factory. 2. Q: How long is the guarantee? A: 12 months guarantee will be effective from the date of commissioning or 15 months from delivery. 3. Q: Where is your factory located? How can I visit there? A: Our factory is located in Suzhou, Jiangsu Province, China,which is quite near Shanghai Airport All our clients, from domestic or abroad, are warmly welcome to visit us! 4. How about after-service? We do provide life-long technical consultancy and spare parts. Cost-free direction installation. Normally like Turkey, Thailand, USA etc, we go there for exhibition, at the same time we will visit customers factory for machine troubleshooting and maintenance
HIPS black repro pellets.
LDPE repro pellets.
PE/PA repro pellets.
Thiadiazole derivative metal deactivator T561 CAS: 59656-20-1 bis (tert-dodecyl dithio) -1,3,4-thiadiazole This product is a corrosion inhibitor of copper, non-ferrous metal deactivator has excellent oil solubility, can be used as a metal deactivator in lubricating oil, and has good extrusion and wear resistance. Our company has independently developed thiadiazole polysulfide (T561) by absorbing foreign production technology, and all its raw materials are produced at home. T561 has excellent oil solubility, copper corrosion inhibition and oxidation resistance. It can significantly reduce the corrosion of ZDDP to copper and solve the problem of hydrolysis stability. It can greatly improve the oxidation resistance of Daqing paraffin-based oil in internal combustion engine oil. Chemical properties can also be used in two-stroke gasoline engine oil, which can improve the anti-swelling and tightening properties of the oil products. index Item Quality Indicators Test Method Content 98.5% HPLC Appearance, yellowish transparent liquid, visual inspection Flash point (openings), not less than 130 GB/T 267 Kinematic Viscosity (50 C), mm2/s not greater than 12 GB/T 265 Acid value, mgKOH/g not less than 20 SH/T 264 Copper sheet corrosion (100 C, 3h), grade not less than 91 GB/T5096 Purpose: Metal deactivator T561 is a thiadiazole polysulfide, which can capture active sulfur in oil products and inhibit metal corrosion. Because it contains polysulfide bonds, it can form sulfide film with metal surface, which effectively inhibits the catalytic effect of metal ions on oil products. Therefore, T561 is a very effective lubricant additive in improving the performance of oil products. Adding 0.03-0.05% T-561 metal deactivator to the formulation of alkaline high zinc antiwear hydraulic oil, the oil can pass the hydrolysis stability test of Denison HF-2. Adding 0.4-0.5% T-561 metal deactivator to the formulation of internal combustion engine oil can increase the TFOUT induction period of oil by more than 60 minutes. In addition, T-561 metal deactivator can also be used in industrial gear oil and high-quality gasoline engine oil. Effect of T561 in Anti-wear Hydraulic Oil: Test method without T561 plus 0.037% T561 HF-2 specifications Copper weightlessness (mg/2132) 3.317 0.5 Aquatic acid value /(mg KOH/g) 0.56 1.66 6.0 Appearance/Grade Corrosion of Copper 1b Gray-free Black Thermal stability: precipitation, none, none Color/number Anti-emulsifying degree/min (40-37-3) 14'-(40-37-3) 30' Packaging: 25kg/barrel Shelf life: sealed at room temperature for one year
PMMA nature color /mix color sorted with flakes, regrinds, lumps from cutting sheets and injection runners
Description:ABS off grade for injection pellets color: black Shipping Pt.: Taichung PORT Taiwan Quantity: 16000 kgs
PC carbon fiber regrinds//Oringal from FOUP BOX material: polycarbonte/CF color: Black form: regrinds conductivity: 10E8 Qty:25tons/M