SPECIFICATION Product Name QUINOLINE YELLOW C.I.NO 47005 Synonyms ACID YELLOW # 3 C.I.NAME Food Yellow 13 Chemical name The disodium salts of the disulfonates of D&C NO. Yellow-10 2-(2-quinodyl) indan-1,3-dione CAS NO. 8004-92-0 (principal component). EINECSNO 305-897-5 E.NO E-104 SR.NO TEST LIMITS 1 Total colouring matter calculated as the 70 sodium salt percent by mass.MIN 2 Sodium2-(2-Quionoly)Indan-1,3 Dione 15 Monosulfonate percent by mass.MAX Disodium 2-(2-Quionoly)Indan-1,3 80 Disulfonate,percent by mass,MIN Trisodium 2-(2-Quionoly)Indan-1,3-Dione 7 Trisulfonate,perent by mass.MAX 3 Water insoluble matter,percent by mass MAX 0.2 4 Combined ether extract,percet by mass MAX 0.2 5 Subsidiary Coloring matter,percent by 4 mass,MAX 6 Organic Compounds other than coloring 0.5 matter,percent by mass,MAX 7 2-2(quinly)indian-1-3dione,(mg/kg.), MAX 4 8 Unsulfonated primary Aromatic amines, 0.01 percent by mass.MAX 9 Total Heavy Metal as lead(mg/kg)MAX 40 10 Arsenic,(mg/kg)MAX 3 11 Lead,(mg/kg)MAX 2 12 Mercury(mg/kg)MAX 1 13 Cadmium(mg/kg)MAX 1
Product Description Paraffin wax, also called 'paraffin', is a white, tasteless, odourless, translucent waxy solid. Paraffin wax is a type of wax that is derived from petroleum. Here are some key facts about paraffin wax: 1. Composition: Paraffin wax is primarily composed of long-chain hydrocarbons, specifically alkanes. These hydrocarbons are saturated, meaning they contain only single bonds between carbon atoms. 2. Physical Properties: Paraffin wax has a relatively low melting point, typically between 46°C to 68°C (115°F to 154°F), making it easy to melt and work with. It solidifies at room temperature.  Popular Products Our paraffin wax are kunlun brand from Petrochina (Fushun Petrochemical Company and Daqing Petrochemical Company).Mainly Products are fully refined paraffin wax, semi refined paraffin wax and crude paraffin wax with the melting point of 54/56/58/60/62/64.      (1)Fully Refined Paraffin Wax 58/60             (2)Semi Refined Paraffin Wax 58/60             (3)Fully Refined Paraffin Wax 56/58       (4)Fully Refined Paraffin Wax 60/62          (5)Fully Refined Paraffin Wax 64/66                (6)Crude Paraffin Wax 58/60   Product Parameters  Item Value Test method Grade #52 #54 #56 #58 #60 #62 #64 #66 Melting point, °C 52 54 56 58 60 62 64 66 GB/T 2539 54 56 58 60 62 64 66 68 Oil content, %(mass) 0.5 GB/T 3554 Color, Saybolt scale +27 +25 GB/T 3555 Max light stability 4 5 SH/T 0404 Penetration, (25°C),1/10mm 19 17 GB/T 4985 Kinematic viscosity, (100°C),m/s Report GB/T 265 Odor number 1 SH/T 0414 Water soluble acid/base Not detected SH/T 0407 Mechanical impurity & moisture Not detected Visual inspec
SPECIFICATION Product Name GREEN-S Synonyms ACID GREEN # 50 C.I.NO 44090 Chemical Sodium N-(4-((dimethylamino)phenyl)(2-hydroxy-3,6- C.I Name Food Green 4 Name disulfo-1- Naphthalenyl)-methylene)2,5- CAS No. 3087-16-9 cyclohexadien 1-ylidene)-N-methyl Methanaminium. EINECS NO. 221-409-2 E.NO. E-142 SR NO LIMITS 1 Total coloring matters calculated as the 80 sodium salt percent by mass .MIN 2 Water insoluble matter,percent by mass,MAX. 0.2 3 Combined ether extract,percent by mass,MAX. 0.2 4 subsidiary dyes,percent by mass, MAX 1 5 Dye Intermediates,percent by mass,MAX a. 4,4-bis(dimethylamino)-benzhydryl alcohol 0.1 b. 4,4-bis(dimethylamino)- benzophenone 0.1 c. 3-hydroxynaphthalene-2,7 disulfonic acid 0.2 d. Leuco Base, 5 6 Unsulfonated primary aromatic amines percent by 0.01 mass,MAX 7 Total Heavy metal as lead [Mg/kg] MAX 40 8 Arsenic [mg/kg]MAX 3 9 Lead,[mg/kg]MAX 2 10 Mercury,[mg/kg]MAX 1 11 Cadmium[mg/kg]MAX 1
CE Certified Assay+ Covid 19 IgG / IgM Rapid Test Assay+ Covid 19 antibody rapid test is manufactured in Canada to detect specific Covid 19 IgG and IgM for the healthcare providers. Assay+ COVID-19 Rapid Test Kit is qualitative test device for SARS-CoV-2 IgM/IgG antibodies in human serum, plasma, whole blood or finger tip blood. This device has been authorized by CE Mark and waiting for FDA approval. Sensitivity over 90 for IgM and 95-100% for IgG and 100% specifity have been proved used by our customers in large quantity and tested by multiple clinical agreement studies in the University Medical Center, Brooklyn at New York, USA , Henry Ford Hospital at Michigan, USA, we'll supply the high quality product for our customers. You can visit our web site https://bioassayplus.com, email: info@immunoassay.ca, or marketing@bioassayplus.com, or call phone 313 455 0968. New test is under the way: 1. Covid 19 antigen rapid test 2. Covid 19 protective antibody and titer rapid test ( Test antibody reaction after taking Covid 19 vaccine) 3. We also supply raw materials for diagnostic industry, please check Bioassayplus.com Package and Price for Covid 19 IgG/IgM rapid test: 25 test kits per box 100 to 2500, 1.99 USD per test, 2501 to 4999, 1.80 USD per test 5000 to 50,000, 1.75 USD per test 50,000 to 1000, 000 or more, 1.65 USD per test
Contract Axminster Broadloom Carpet Furnish Carpet that comply with the following requirements: 1. Traffic Classification: Heavy traffic. 2. Fiber Content: 80% wool, 20% nylon of soil-resistant treatment. 3. Construction: Machine Woven. 4. Face Construction: Cut pile 5. Pitch: 27.55/dm -175mm 6. Rows: 27.55/dm/-175mm. 7. Pile Height/Wire: above backing 6.5mm. 8. Surface Pile Weight: 877 g/sq. m, minimum. 9. Total Pile Weight: 1683 g/sq. m, minimum. 10. Colors and Patterns: As indicated in Schedules or provided by the designer . 11. Width: 3.66m , 4.00m or customised B. Backing: As follows 1. Primary Backing: 112 g/m (3.3oz/yd2) woven polypropylene 2. Secondary Backing: 237 g/m2 (7oz/yd2) woven jute 3. Laminate: 948 g/m2 (28oz/yd2) synthetic latex C. Performance Characteristics: As follows: 1. Critical Radiant Flux Classification: Not less than 0.22 W/sq. cm. 2. Dry Breaking Strength: Not less than 445 N per ASTM D 2646. 3. Resistance to Insects: Comply with AATCC-24. 4. Noise Reduction Coefficient (NRC): 0.6 per ASTM C 423. 5. Colorfastness to Crocking: Not less than 4, wet and dry, per AATCC-165. 6. Colorfastness to Light: Not less than 4 after 40 AFU (AATCC fading units) per AATCC-16. 7. Antimicrobial Activity: Not less than 2 mm halo of inhibition for gram-positive bacteria; not less than 1 mm halo of inhibition for gram-negative bacteria; no fungal growth; per AATCC-174. Note: The technical parameter sheet flexibly based on the needs of different customers. The new technical specifications are modified without prior notice due to processing changes, technological progress and other conditions.
Making tempeh is a process of fermenting soybeans using the mold Rhizopus oligosporus. Here are the general steps: 1. **Soybean Preparation**: Soak the soybeans in water overnight or at least 8 hours. After that, drain the soybeans. 2. **Boiling Soybeans**: Boil the soybeans that have been soaked in clean water until cooked. Ripe soybeans usually crumble easily when squeezed. 3. **Drying the Soybeans**: Drain the soybeans and let them cool to a temperature of around 35-40�°C. This is important so that the mold can grow well. 4. **Mold Inoculation**: Sprinkle isolated Rhizopus oligosporus mold (can be purchased as tempeh yeast) evenly throughout the aired soybeans. 5. **Fermentation**: Place the inoculated soybeans in a container or wrap using banana leaves or plastic. Let fermentation take place for 24-48 hours at a temperature of around 30-32�°C. 6. **Packing**: After the soybeans are wrapped and the fermentation process is complete, the tempeh is ready to be consumed. Usually, tempeh will feel dense and have a distinctive aroma. This process can vary slightly depending on local preferences and conditions, but in general those are the basic steps for making tempeh.
SPECIFICATION Product Name TARTRAZINE C.I. NO. 19140 Synonyms Acid Yellow # 23 C.I.NAME Food Yellow-4 chemical Trisodium 5-hydroxy-1-(4-sulfonato phenyl-4- IS.NO 1694:1994 name (4-sulfonato phenylazo)pyrazole-3-carbaxylate CAS NO. 1934-21-0 EINECS NO 217-699-5 SR NO TEST LIMITS 1 Total dye content percent by mass on dry basis 87 (at 105_+1�°C for 2hrs) 2 Loss of drying at 135�°C, Sodium Chloride and Sulphate 13 percent by mass,MAX. 3 Water insoluble matter,percent by mass,MAX. 0.2 4 Combined ether extract,percent by mass,MAX. 0.2 5 Subsidiary dyes,percent by mass,MAX. 1 6 Dye Intermediates,percent by mass.MAX. 0.5 7 Heavy metals as pb(mg/kg)MAX. 40 8 Arsenic,(mg/kg). MAX 3 9 lead,(mg/kg) MAX 10
Gents t-shirts. All white. Sizes: m/l/xl. Ready to be shipped. Origin:bangladesh. We are looking for a serious buyers of t-shirts to confirm this whole produce. 1. 130gsm, 50% polyester 30% cotton. Qty:2, 000, 000 pcs. Contact for our price !! 2. 150gsm, 50% polyester 30% cotton. Qty:2, 000, 000 pcs. 12 pcs in polybag. 100 pcs in a carton. Looking for a serious buyers who can confirm our t-shirts now, and can open an Irrevocable Transferable L/C at sight confirmed ASAP. We are the world's leading supplier of our above products, with high class workmanship in our factories in Bangladesh/India/China/Vietnam. As as an supplier and Broker we have large amount of production and stocklots available at very price. Our factories are able to produce the following: Gents T-shirts - Production: 1,800,000 pcs per month. We have Stock-lots of Gents -T-shirts: Over 5,000,000 pcs available.!! We have over 5,000 employees in all our factories in S.E. Asia. Our purpose is to serve you with an excellent service, making sure goods are shipped on time to all destination.
2000 Komori L-428 EH, KMS IV (Komori Monitoring System) Impressions:107 mio. Color(s): 4Size: 520 x 720 mm Komori PCC for CIP 3 connection KPS-2 PQC Register remote control AMR automatic make ready system Chromed impression cylinders Chromed plate cylinders Komorimatic Conventional sidelay Steel plate in feeder Stream feeder Electromecanic double sheet control Beil Registersystem SAPC semi-automatic plate change Steel plate in delivery Grafix Digitronic powder spray Powder spray All washing devices Techno Trans Aplha C PPC 4 with calebrating files from CIP3 Speed: 15000/
DSBR AUTOMOTIVE BEARINGS USED IN AGRICULTURAL MACHINERY DSBR automotive china agricultural machinery bearing series. They ensure smooth operation, reducing machinery wear and tear. Regular maintenance of DSBR automobile bearings extends machinery lifespan. Faulty DSBR bearings can compromise machinery safety, emphasizing their importance. How Automotive Bearings Affect Agricultural Machinery Efficiency î?? 1 Automotive bearings for agricultural machinery reduce friction, ensuring smooth and efficient operation. î?? 2 They help distribute load evenly, preventing premature wear and tear, thus extending machinery lifespan. 3 High-quality bearings contribute to the machineryâ??s reliability, reducing downtime and increasing productivity. 4 Regular maintenance of these automobile bearings can prevent unexpected machinery failures, ensuring safety and efficiency in the field. FUTURE TRENDS IN THE AGRICULTURAL MACHINERY AUTOMOTIVE BEARINGS MARKET As one of leading agricultural machinery bearing manufacturers, we make sure that the future of agricultural machinery bearings is promising, with trends leaning towards sustainability and efficiency. The demand for high-quality, durable bearings is on the rise, as they significantly reduce machinery downtime and increase productivity. Additionally, the market is seeing a shift towards bearings made from environmentally friendly materials. Technological advancements are also paving the way for smart bearings, which can monitor their own condition and alert users to potential issues, further enhancing machinery efficiency and lifespan. As an auto bearing factory, we will do our best to meet all the needs of customers.
Designation: A743/A743M-13a Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application A451ASTM A451-06 Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperatu A487 Standard Specification for Steel Castings Suitable for Pressure Service A351 Standard Specification for Castings, Austenitic, for Pressure-Containing Parts A352 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service A703 Standard specification for steel casting,General requirements,for pressure-containing parts Features: 1. High abrasion resistance 2. Corrosion resistance 3. Tear resistance 4. Hardness: Applications: 1. Roller screen rolls for the iron ore pelletizing industry 2. Subsequent pellet processing operation in the steel industry Results of materials testing Chemical Analysis (%) Pipe No. C Si Mn P S Ni Cr Mo CA6NM 0.06 1.00 1.00 0.04 0.03 3.5-4.5 11.5-14.0 0.4-1.0 ZG06Cr13Ni4Mo 0.06 0.80 1.00 0.035 0.025 3.5-5.0 11.5-13.5 0.4-1.0 Mechanical Properties Pipe No. Heat No. Tensile Strength MPa Yield Strength MPa Elongation After Fracture % Reduction of Area % Hardness (HB) CA6NM min. 755 min. 550 Min. 15 Min. 35 285HB +-25
Year: 2007 Location: Europe Availability: 1 - 2 months Current condition: In Production Final Product: Food\Fruit\Fruit concentrate Other specs: Complete Plant For Processing And Aseptic Filling Of Natural And Concentrated Fruit Purees And Tomato Puree Produced by Rossi and Catteli S.P.A, Parma, Italy. Capacity up to 20 t/h of fresh fruits Can process seed and stone fruits (peaches, apricot, apples, pears, plums, carrots, strawberries, cherries) and tomatoes The end product can be single strength or concentrated up to 48% Brix SECTION A EXTRACTION 1. Destoning And Depulping Section 2. Cold Extracion, Deactivation And Hot Refining 3. Puree Extraction SECTION B CONCENTRATION Evaporator model VENUS T400 DE CB- two effects Section C Sterilization Sterilizer OLIMPIC TC-XX/AS (110/120gr. C holding time 4 sec.) SECTION D ASEPTIC FILLER Aseptic filler model type MACROPAK TM2000/3 (year 2006) for product packing in 220 or 1500 l sterile bags Three head filler for the aseptic filling of liquid, semi-liquid, high-viscosity, or diced products; the machine is fed with four drums and the relative pre-sterilized bags already placed on the pallet. In the case of 1500 l bags there will be one single bin on the pallet. The machine is equipped with a sophisticated control system for the monitoring of the filling process. Steam barriers controlled by temperature sensors protect all the moving parts the aseptic area
Dolph Microwave as experienced manufactures of satellite communication antenna offering various type of satcom antenna to solve communication. An satcom antenna can be used for both transmitting and receiving signals from the satellite including GEO, LEO and MEO etc.. Based on function, it can be divided into Rx only and Tx/Rx type. Rx only of mainly for broadcast and Tx/Rx are mostly for communication and others. They can provide access to satellite communications even in harsh environments. Types of Satcom Antenna Dolph Microwave satcom antenna can be divided into 3 types including earth station antenna, flyaway(quick deploy) antenna and Motorized Quick Deploy Antenna. The frequency band are available in single band, dual band and multi band like C-band, Ku-band, Ka-band, X-band, S-band and also C&Ku, Ku&Ka and S&X dual band. Besides the standard diameter with standard frequency range. It can also be customized based on customer requirement. Any requirement, please inform at any time. Main Parameter Required When Looking for Satcom Antenna Antenna type: Flyaway antenna, earth station antenna or quick deploy antenna Diameter: 1.2, 1,8, 2.4, 3.7, 4.5, 5.3 or 6.2 meter or big dish antenna Frequency range: L band, C band, X band, Ku band, DBS band, and Ka-band or others Polarization: Linear Pol. Or Circular Pol. Port: 2-port or 4-port or multi-port Drive mode: Motorized or manual type Installation site: Roof of building or ground Tracking type: Step tracking or monopulse type Reflector material: Aluminum or carbon fiber Application of Satcom Antenna Antenna is an important part of satcom communication system as the antenna RF signal input and output channel. The performance of antenna and microwave waveguide components affect whole system performance. The distance between antenna and satellite is far. To assure the signal effective transmission, most of the earth station adopts parabolic antenna. All of Dolph Microwave offered antenna is parabolic antenna with features is high gain and better directive. There are many waveguide manufacturers, but we are one of the best choices for you.
Laser+QR Code+Reflector Hybrid Navigation Collaborative Robots in Automotive Manufacturing 12kg Collaborative Robots Payload(kg) Collaborative Robots in Manufacturing 1150mm Operation Radius Collaborative Robots Industry 4.0 ±1mm Positioning Repeatability Cooperative Robots 2/ 8 Runtime (H) Industrial Collaborative Robots 0.5 Machine Vibration(g) MORA: MORA Collaborative fast pick and place robot, collaborative industrial robots, computer integrated automated manufacturing software, Computer Automated Manufacturing Electronics Robots. Basic Chassis length 650mm Battery Lithium-ion 48v 70Ah Safety Standard dual lasers; front/rear 3D cameras; Parameters Chassis width 1000mm Charge time 2H System bumper; lasers for vertical protection; Bidirectional Runtime 8H single-point laser (optional); Self weight 300kg hole detection; sound and light alarm. Performance Manipulator rated load 12kg Customized Noise 75db Max. slope 5% Machine vibration 0.5g Ground fatness 10mm/m2 Ground clearance 35mm Height above ground 25mm Still tolerance 10mm Repeatability ±1mm Communication IEEE 802.11 a/g/b/n/ac/ax 2.4/5GHz, 5G optional Mora Robot Main Function Obstacle Detect and Auto Stop Intelligent Obstacle Avoidance Easy Integration With Third Party Facilities Auto Positioning and Navigation Intelligent Route Planning Man/Machine/Fleet Cooperation Dual Way Movement (Forward/Backward) Optional Wafer Box/Tray Cnc Machining Flexible Turnover Auto Charging Mora Robot Order Picking System Advantages Accuracy onfiguring with vision system, docking accuracy ±10mm, picking accuracy ±1mm Flexible Intelligent autonomous navigation, 30 meters laser detection distance, agile obstacle avoidance, suitable for mixed man-machine operation. Safety Anti-static design, anti-collision bumper, no need safety fence. Easy to Use Graphical programming. Easy to operate and connect by Mobile phone and PAD wirelessly. Quick Integration Modular system for fast integration of various applications. We can provide kinds of warehouse picker robots for sale, and the price of autonomous mobile robots in warehouse is reasonable, if you want to buy robot that picks up things , please contact us. Now the amr robot cost is reasonable, if you have needs, please leave us a message.
General Introduction: It uses vacuum suction mode controlled by intelligent process, through the combination of products and equipment (High Frequency, Diamond Peeling, Ultrasonic, Oxygen Sprayer, Vacuum, BIO, PDT Light, Skin Scrubber) to improve skin. Clinical Applications: 1. SPA Microdermabrasion SPA Skin beauty machine completely changed the traditional way, which is hand-cleaning skin relying on individual's practice skills, SPA Skin beauty machine, using vacuum suction mode controlled by intelligent process, through the combination of products and equipment, deep cleaning the skin and pores off horny, acne, blackheads and other impurities in very short period of time. And improve the deep absorption of nutrition products, promote pores tightening, smooth skin, increase skin moisture, and make your skin whitening, moisturizing and good texture. 2. PDT light Photon dynamic is a cold light and will not create high heat or burn the skin. It can transfer light energy into cell inner energy, accelerate circulation of cells' growth, and stimulate the fiber cell to produce collagen protein. It has unimaginable effects on aging skin, acne skin, macular skin allergic skin, wrinkled skin and the sun-burnt skin, never bringing injury or discomfort to the skin. PDT is the world's top scientific and technological achievement, which applies photon dynamic reactivity to skin treatment and nursing. It is a facial skin care expert without side-effect and can be operated easily. 3. Vacuum with RF heat energy the perfect combination of vacuum and RF heat energy to deeply do massage in the different depth of fat layers, breaker and dissolve cellulite, tighten and shape body. It can break up the subcutaneous fat, decrease cellulite accumulation, smooth lymph and discharge the fatty acid and toxin that is decomposed through lymph system. 4. 40KHZ ultrasound cavitation using 40kHz~1MHz ultrasound to make intense vibration, which can cause an inner explosion in the fat tissues and finally get rid of lipocyte. It can effectively break down stubborn and deep fat, decrease quantity of lymphocytes . The vacuum can promote liquid flow of lipocyte and fat tissues, then speeds up excretion of toxins and waste, achieving effect of fat elimination, slimming, skin tightening muscle flexibility enhancement.
Hello importer, Offering palm or nipah or coconut broom stick. The leaves are cleaned. It's made from Indonesian palm / nypa / coconut leaves. It can be used as a craft material and for cleaning tools. 25 MT for 40ft container and 12-14 MT for 20ft container. Price of Product ( USD price or FOB price) : Negotiable Product Origin : Indonesia Key Specifications/Special Features : ---> Origin: Pangandaran/Banten Indonesia ---> Size: 90 cm up ---> Color: Brownish yellow (palm broom stick), white cream (nipah broom stick), brown (coconut broom stick) ---> Moisture : Dry 35% ---> Type : Common ---> Clean, free insect ---> Handmade : Yes ---> Place of Origin: Indonesia ---> Port Of Loading: Tanjung Priok, Jakarta ---> Payment Term: T/T 50% Down Payment and 50% after copy Bill of Lading OR 100% L/C At Sight ---> Delivery Time: Shipment within 2 to 3 weeks (for the first-time buyers) ---> Documents: Original Bill of Lading, Commercial Invoice & Packing List, Fumigation/Phytosanitary Certificate, Certificate of Origin Minimum Order Size and Packaging Details : ---> Packing with 50 kg woven PP bags (gunny plastic) ---> Minimum Order Quantity by Sea is 20ft/40ft container We are prepared to meet large-scale market demands. For further details product, please contact me
Agriculture Farm for sale. The Company is owner of 982.51 Acres, in B S. Khatian and in possession of 26.83 acres Khals & Nalas of B. S. Khatian of Mouja Lot No - 21 Choto Kumira, Upazilla/ Thana Sitakunda, District Chittagong. Bangladesh. 10. The company has following plantation: a. 500000 Rubber including in production and nursury. b. 40,000 Gammari. c. 20,000 Mahogany, Gorjon. & Karai. d. 20,000 Euclyiptas, Jam, Akasia and others. e. 20.000 Teak wood. f. 5,000 Mango, Jackfruit, Lichi, Coconut, Papaya plantations in production. g. 10,000 Lemon plantation in production. h. 10,000 Banana plantation in production. 1.200 Acres land in seasonal vegetable in production. j. 200 Acres Sun Grass in sold every year. The company land in long with Chiitagong Dhaka Railway Double line and 4 lane Dhaka Chittagong Trunk Road, From Dhaka trunk road 2 Independent roads enter the company Farm land passing over the Railway lines. One is 400 Meters and another is 1000 area, along the 4 Lane Highway. If interested please contact us Mob Whats app - 0088-01817512841.
We are one of leading wood powder manufacturers and suppliers in viet nam. We could supply various kinds of wood powder such as pine wood powder, rubber wood powder, mix pine and rubber wood powder, mix wood powder….. With large volume of long-term stability, competitive price. Our wood powder could be used as material for fertilizer, mosquito coil, wpc compound, wpc (wood plastic composite), pulp powder. Please refer to below for our specification of mix pine and rubber wood powder: - commodity: wood powder - available mesh size: 60, 80. - color: brown, yellow, ivory, white. - moisture: 8% - packing: non-compress and stuff in jumbo bag with pallet. - weight: 20-21 tons / container 40’hc - capacity: 2, 000 tons per month. - payment term: l/c at sight or t/t (50%/50%) Size: 60-80mesh Color:brown, yellow, ivory, white Weight:20-21 tons /container 40'hc
Commodity : c-9 white rice Broken : 2%, max Quality : well cleaned, silky sortexed Crop : 2014 Packing : 40 kg non-woven bag We are rice and other agro commodities exporters. We export different agro commodities from worldwide including all varieties of rice, sugar, animal feed, pulses, chickpeas, as well fruits and vegetables. Fruits & veg capacity: for fruits and vegetables including potatoes, onion we have capacity to ship more than 100 fcl in a month from pakistan & more than 100 fcl in a month from china egypt Ginger & garlic capacity: we have capacity to ship more than 100 fcl in a month from china Animal feed capacity: for animal feed we have a capacity to load vessels easily from ukraine We are also exporting rice from india and pakistan in different destinations Payment terms 30 % advance 30% upon scan documents 40% cad or (it can be credit) if any security is provided (such as pdc cheque or bank guarantee) Kindly let us know your requirement so that we can quote you our best prices accordingly Thanks and regard
The china pipe bending machine is used to make a circle, curve, or spiral for workpieces. It is widely used in such fields as the petroleum industry, chemical engineering, hydroelectricity, shipbuilding, steel structure, machine making and so on.� One machine can not only produce one size, it depends on the machine designing. Our pipeline bending machine is a piece of special equipment designed for section bar producers. The� automatic pipe bending machine can be used to bend the section bar into round, arc or other shapes of workpieces. Parameters Of� � cnc pipe bending machine for sale Item Parameters Bending-resistance modules of section 270-2000(cm�³) Max. Resistance of material 245Mpa(asQ235A) Outward bending for channel steel Model of channel steel: 50 Min. Bending diameter: �?3500mm Inward bending for channel steel Model of channel steel: 40 Min. Bending diameter: 3500mm Steel tube Max. Section: 426mm16mm Min. Bending diameter: 15000mm Min. Section: 90mm 8mm Min. Bending diameter: 3000mm Flat bending for band steel Max. Section: 200m 60mm Min. Bending diameter: 3000mm Upright bending for band steel Max. Section: 500mm ?75mm Min. Bending diameter: 4800mm Working speed 2-3m/min Motor power Hydraulic pump: 22kw Supporter motor: 0.75kw 2  0.18kw 2 Dimension 4880mm 3200mm 2000mm(length width height) Total weight About 36000 kg With 53 years' experience, Jinggong is specialized in manufacturing high-quality C Z purlin roll forming machine, feel free to contact!
