Specifications: API GL-5 Packaging: 1 L metal container 12 units / case 4 L metal container 4 units / case 20 L plastic container 1 unit / case 208 L drum - TECHNOL GEAR OIL 80W-90 GL-5 is an extreme pressure gear oil produced using selected high quality mineral base oils to fulfill stringent requirements of manual gearboxes, transfer boxes, rear axles, and differentials of passenger, commercial and industrial vehicles which require API GL-5. Its high viscosity index ensures excellent lubrication of moving gear components and improves gear shifts at very low and very high temperatures and its high thermal stability provides protection against deposit formation. This fluid has excellent antioxidant, antiwear, antifoaming, anticorrosion, antirust and load carrying properties.
FEATURES > Specially designed high-performance controller-based control circuit for ultra-high reliability. > Key Parameters adjusted through user interface for the Digital Control Unit > High efficiency>98% > Fast correction speed up to 75 V/ Sec. variable speed servo motor and proportional control circuit provide a response time of 10msec to correct voltage fluctuations without noise or oscillations in output. >Accuracy �± 1% from no load to full load > Auto/manual operation facility. > Plug and play a single control card for easy serviceability. > Reduced power loss and resultant lower running cost yield higher cost savings and help the customer recover the cost difference in a few months.
The purpose of this machine is to evaluate the impact on product performance after customers may accidentally drop the product during experimental use. It is applicable to the original posture and accelerated drop test of small Consumer electronics such as mobile phones, PDAs, telephone electronic dictionaries, CDs, MP3, etc; Function: Vacuum absorption drop, adjustable drop height, manual lifting, precise impact location, with acceleration and speed measurement Multi angle drop device: 0 �°, 45 �°, 90 �° Drop height indication: 1cm Effective height of drop: 300-1800mm (optional 2000mm) Maximum allowable weight of test piece: 2kg Falling floor medium: steel plate Drop range: 500x600mm Air source used: 0.5Mpa Machine size: W800XD900XH2200mm Power supply: AC220V 50HZ 5A
The groove type compost turner are also called as guide rail type compost turner, which is usually used in the fermentation and turning of the poultry manure, sludge and garbage, filter mud, sugar dregs cake, straw sawdust and other organic waste. It is widely used in the fermentation and compost job of organic fertilizer plant, compound fertilizer plant, sludge and waste treatment plant, garden spot, agaricus bisporus growing plant, etc,. Features: Automation control. Centralized control by the control cabinet, so that can realize the function of manual or automatic control. Solid and durable. The teeth are durable and has the ability of breaking and mixing the compost materials. The groove type compost turner is suitable for aerobic fermentation, and it can match with solar energy fermentation chamber, fermentation tank and transfer machine. Compact structure and advanced technology. The use of some beneficial microorganisms can promote the rapid decomposition of organic wastes such as livestock manure.
Bamboo processing machines have undergone significant advancements, aiming to enhance efficiency, reduce labor costs, and improve the quality of bamboo products. Among these innovations are automatic bamboo splitting machines, wire drawing machines, and bamboo strip rough planer machines. Bamboo processing machines are specialized equipment designed to handle the transformation of raw bamboo into various finished products. The bamboo industry encompasses a wide range of applications, from construction materials to furniture, and from handicrafts to edible bamboo shoots. Depending on the intended end product, bamboo processing can involve a variety of machinery, each tailored to specific stages in the processing chain. Bamboo processing machines play a pivotal role in automating various stages of bamboo processing. They offer a range of functionalities, from splitting bamboo poles to crafting intricate bamboo products. EOOE specializes in creating multifunctional machines that streamline the bamboo processing workflow. Their machines are designed to reduce manual labor, increase productivity, and ensure high-quality output. Type of Bamboo Machinery Automatic Bamboo Splitting Machine Automatic Adjustment: The machine automatically adjusts the length of bamboo poles, streamlining the processing workflow. Bamboo Pole Feeding: It facilitates automatic feeding of bamboo poles, minimizing manual intervention. Detection Technology: Utilizing visual camera measurement technology, the machine detects the outer diameter and thickness of bamboo poles accurately. Splitter Disc Change: With automatic disc change functionality, it ensures seamless operation without interruption. Bamboo Splitting and Grading: The machine offers automatic bamboo splitting and grading functions, optimizing efficiency and quality.
UBT15-6B4 2 Stroke Advantages: Real six-layer painting, with good corrosion resistance. Adopt American brand PPG spray paint, more beautiful appearance. Add timer, more convenient for maintenance. Stylish design, Light and compact. Advanced cross-flow induction, smooth running. Larger fuel tank for better lubrication. Adjusted air intake system for better take-off. High performance and easy of operation: Digital CD ignition for easier engine starting, faster throttle response and smoother trolling. Recoil starter with larger spool makes manual starting fast and easy. Large alternator and rectifier for easier battery charging. Front-mounted shifter for easier operation. Remote control models available. Shallow water drive. Adjustable steering friction reduces steering forces. User convenience and reliability base: Propeller exhaust for quieter ride. Thermostatically controlled cooling system for constant engine temperature. Stainless steel water pump housing liner for superior durability. Premium marine aluminum alloy for ultimate corrosion protection. Galvanized internal waterways for superior corrosion resistance. 24-liter fuel tank, including fuel fittings and fuel lines. Aluminum propeller. MODEL: UBT15-6B4 Engine type : 2-Stroke, Water-cooling Engine Position : Outboard Power : 11kW / 15HP Displacement : 246cc Rated speed : 4500-5500r/min Starting system : Manual Gear shift : F-N-R Gear ratio : 2.08 Fuel tank : 24L Lubrication system : 50:1 Propeller options : 3-8"/10"/11"/12" Weight : 36kg Dimension(L*W*H) : 878*363*1062mm
Industrial Microwave Tuners are waveguide components used to match the load impedance with the source impedance. They minimize the amount of reflected power, providing the most efficient coupling of power to the load. Dolph Microwave supplies both manual 3- and 4-stub tuners, electrical and auto tuners. Industrial Microwave Tuners utilize manual tuning and lock simply. They are generally used in applications where the load impedance varies significantly due to variations in the load. Microwave components for industry microwave is 915 and 2450MHz. Taking the WR340 for example. FAQs of Industrial Microwave Tuners Application of Industrial Microwave Tuners Industrial Microwave Tuners is a common impedance adjust. The depth, spacing and radius of the pins can be set as required. It is a common device for impedance matching in high-power microwave systems. Work Principle of Industrial Microwave Tuners When a metal pin of a certain diameter is inserted along the center of the broad side in the waveguide, its equivalent circuit is parallel susceptance. When the insertion depth of the pin is shallow, the pin mainly acts as a concentrated electric field, and the equivalent susceptance of the pin is capacitive. As the insertion depth of the pin increases, the capacitance increases, and at the same time, the axial current on the broad side of the waveguide flows along the axial direction of the pin, thereby generating a magnetic field and making the pin have a certain inductance. LC series loop on the main line. The resonance of the pin is related to the operating wavelength, insertion depth and width of the narrow side of the waveguide. More industrial microwave components may interest you microwave bends microwave launcher There are many waveguide suppliers, but we are one of the best choices for you.
SNUOK DC21V Cordless Battery Power Nail Gun Key Features: Cordless Freedom: Embrace unparalleled mobility with the cordless design of the DC21V nail gun. Free from cumbersome cords, you can effortlessly maneuver around job sites or tackle tasks in tight spaces. Efficient Power: Powered by a robust 21V lithium-ion battery, this nail gun delivers consistent, reliable power to drive nails through various materials with ease. Say goodbye to manual hammering and hello to effortless fastening. Versatile Compatibility: Compatible with a range of nail sizes and types, this nail gun adapts to suit your specific needs. From finishing nails to brads, its versatile enough to handle a wide array of carpentry applications. Quick-Fire Mechanism: With rapid-fire capability, you can tackle projects swiftly and efficiently. Whether youre framing, installing trim, or working on furniture, this nail gun ensures rapid progress with every trigger pull. Adjustable Depth Control: Achieve precise results every time with adjustable depth control settings. Whether youre working with softwoods or hardwoods, you can fine-tune the nail depth to meet your exact requirements. Ergonomic Design: Crafted for comfort and ease of use, the DC21V nail gun features an ergonomic grip and balanced design. Reduce strain and fatigue during extended use, allowing you to work comfortably for longer periods. Safety Features: Equipped with safety mechanisms, including a trigger lock and jam-clearing functionality, this nail gun prioritizes user safety without compromising on performance. Upgrade your carpentry game with the DC21V Cordless Battery Power Nail Gun. Whether youre a professional contractor or a DIY enthusiast, this nail gun is your ticket to efficient, precise, and hassle-free fastening. Say goodbye to manual labor and hello to effortless productivity.
Automatic chicken slaughtering machine Automatic chicken slaughtering line Automatic chicken slaughterhouse Compact chicken slaughtering line Chicken slaughter Brief descriptions: The compact and complete slaughter line, including live poultry hanging, scalding machine, A frame plucking machine, offals removal table, auto unloader, chilling tank etc. Advantages: 1.Convenient transportation, only need one 40HQ container. 2.Take less Space,40 feet long and 8 feet wide. 3.Save labor and investment,No need to build factories and workshops. 4.Easy installation, whole delivery, no need for supplier installation. 5.High production efficiency,processing 600-1000 birds per hour as your capacity need. 6.Simple operation and Less Maintenance. Main Process and Equipment for Chicken Slaughtering Line 1. Chicken Hanging Hanging the chicken on the slaughtering line by hand 2. Stunning Machine Used to make the chicken become calm and easy to slaughter 3.Auto Slaughter Machine(Optional) Slaughter the chickens automatically , or could slaughter manually as need . 4.Bleeding Trough Used to collect the blood under the conveying line. 5. Scalding Machine Used to scald the carcass of the chicken to remove the feather easily. 6.Plucking Machine(Defeathering Machine) Used to remove the chicken feathers to get a smooth and good carcass body. 7.Evisceration(Taking Offals) Take the offals from the chicken body manually. 8.Auto Unloader Used to unload the chicken carcass from the overhead line. 9.Chilling Tank Used to cool the temperature of the chicken carcass. 10. Overhead Conveyor Line Chicken will be processed on this rail, it is main part for the main slaughter plant Production line.
This is a cutting-edge solution designed to efficiently re-last molded shoes onto footwear lasts. This innovative machine operates using pneumatic pressure, enabling precise and uniform re-lasting processes. Pneumatic Operation: The pneumatic system in this relasting machine provides powerful and controlled pressure for accurate re-lasting. It ensures a secure fit of the molded shoe onto the footwear lasts, enhancing the overall quality of the final product. Improved Efficiency: By automating the re-lasting process, this machine streamlines production and reduces the time and effort required for manual re-lasting. The increased efficiency translates to higher output and cost savings. User-Friendly Design: The Pneumatic Relasting Machine is designed with ease of use in mind. Its intuitive controls and straightforward operation make it accessible for operators of various skill levels, minimizing the need for extensive training. Precise Re-Lasting: The pneumatic pressure ensures even and precise re-lasting, resulting in shoes that conform accurately to the lasts. This level of precision enhances the fit and comfort of the final product. Versatile Application: This machine is primarily used for re-lasting assembled shoes onto the footwear lasts. Its versatility allows it to handle a wide range of shoe types and sizes, accommodating various footwear designs. Durable Construction: The Pneumatic Relasting Machine is built with high-quality materials and robust construction, ensuring longevity and reliability even under continuous operation. Cost-Effective Solution: By reducing the need for manual labor and improving productivity, this machine offers a cost-effective solution for manufacturers, optimizing their production processes. Time-Saving: With the pneumatic re-lasting process, shoes can be quickly and efficiently attached to the lasts, saving valuable time and enabling faster turnaround times.
The ZRS-3H Glow-wire Test Apparatus is according to IEC60695-2-1, IEC60695-2-10, IEC60695-2-11, IEC60695-2-12, IEC60695-2-13 (GB/T5169.10, GBT5169.11, GBT5169.12, GB/T5169.13) < Basic testing methods of Glow wire, basic testing methods of Glow wire device>, UL 746A, IEC829, DIN695 and VDE0471. What is glow wire test? The Glow wire tester ZRS-3H/ZRS-3HS is suitable for resistance to abnormal heat and fire test on lighting lamps, electronic products and household appliances. It uses high-temperature coating spraying on steel structure and imported instrument display, with easy operation and stable performance. The glow wire testing equipment is applicable to flame resistance test of all levels of QC departments and corresponding enterprises. Specifications: Heating temperature: adjustable continuously within the range of 25~1100C, the accuracy of temperature is 1C, the resolution of temperature is ±3C Glow-wire time: 0.1-999.9s±0.1s(time range is adjustable) Ignition time: 0.1-999.9s, auto record, manual pause Flame-out time: 0.1-999.9s (auto record and manual pause) Glow wire pressure on test specimen: 1±0.2N. Limiting pressure depth is 7mm Glow wire: 4 nickel (80) and chromium (20) Made in specific dimensions. Thermocouple: �?0.5 armored nickel & chromium/nickel-chromium wire, K Type. Automatic departure: While reaching specified glowing time, test specimen will depart from glow wire automatically. To save the delivery cost for the oversea market, LISUN designed a compact version glow-wire tester weighing less than 50kg. (Customer need to prepare additional ventilation system for ZRS-3HS)
Introduction The ARLTS series filter cartridge is made of hydrophobic PTFE micropore membrane as the filtering medium. It is manufactured by thermally fusing PTFE filter membrane and PP support material, without any adhesives. Its main features include strong hydrophobic, high retention rate, excellent chemical resistance and thermal stability. It maintains effective filtration effect for corrosive solvents and strong oxidizing liquids. The double-layer membranes formula can better improve the filtration efficiency. Its biological safety and endotoxin indexes meet FDA requirements and Chinese Pharmacopoeia standards. All products have passed integrity tests of the instrument. Specification Filter material: Hydrophobic PTFE micropore filter membrane (single/double layer) Diameter: 69, 83 mm Pore size: 0.1 ~ 3 micron Length: 5" ~ 60" Interface type: 222, 226, 215, 213, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Chemical industry: Terminal filtration for organic solvents, inorganic solvents, chemical reagents, etc. Food Industry: Terminal filtration for clarification of liquor, beverages, wines, fruit wines, removal of microorganisms and fine particles, etc. Gas Industry: Gas filtration, sterile storage tank respirator, air fermentation tanks, etc.
Introduction The ARLTQ series filter cartridge is made of hydrophilic PTFE micropore membrane as the filtering medium. It is manufactured by thermally fusing PTFE filter membrane and PP support material, without any adhesives. It is suitable for the chemical and pharmaceutical industry with strict requirements. Its main features include stable hydrophilic, high retention rate, excellent chemical resistance and thermal stability. It does not require pre-wetting when filtering solvents with high water content. The double-layer membranes formula can better improve the filtration efficiency. Its biological safety and endotoxin indexes meet FDA requirements and Chinese Pharmacopoeia standards. All products have passed integrity tests of the instrument. Specification Filter material: Hydrophilic PTFE micropore filter membrane (single/double layer) Diameter: 69, 83 mm Pore size: 0.1 ~ 3 micron Length: 5" ~ 60" Interface type: 222, 226, 215, 213, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Pharmaceutical Industry: Sterile active pharmaceutical ingredients, sterilization filtration of pharmaceutical liquids, etc. Chemical Industry: Filtration of hydrophilic organic solvents, inorganic solvents, chemical reagents, etc. Food Industry: Filtration of alcohol, beverage, etc.
Introduction The ARLE series micropore filter cartridge is made of PES micropore membrane as the filtration medium. The uniquely shaped and evenly distributed micropores cover more than 85% of the membrane area, ensuring high filtration efficiency and stability. This product exhibits excellent hydrophilic, is free from surfactants, and features efficient antibacterial properties, low adsorption, high mechanical strength, as well as resistance to high temperatures and pressures. It can withstand multiple cycles of steam sterilization. The double-layer filter membrane formula can better improve the filtration effect. All products have passed the integrity test of the instrument. Specification Filter material: PES micropore filter membrane (single / double Layer) Diameter: 69, 83 mm Pore size: 0.1 ~ 1 micron Length: 5" ~ 60" Interface type: 222, 226, 215, 213, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Suitable for terminal filtration in pharmaceutical, biological products, microelectronics, semiconductor, chemical and other industries.
Introduction The ARSP series micropore membrane filter cartridge is made of PP microfiber as the filtration medium. The product is formed by folding the combination of multi-layer filter membranes, achieving a stable deep filtration effect. In order to meet the market demand for high-flow filtration, the product increases the effective filtration area of the membrane. It has the characteristics of high flow rate, long service life, stable structure and wide chemical compatibility, which are conducive to enhancing the filtration efficiency of liquids. It is mainly used for liquid filtration in large-scale LCD and touch panel processes, such as substrate cleaning, stripping, etching, developer and deionized water rinsing, etc. It also meets the demand for large flow rates in the chemical and food industries. Specification Filter material: PP micropore filter membrane Diameter: 131 mm Pore size: 0.1 ~ 60 micron Length: 10" ~ 60 " Interface type: 334 Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Electronics industry: Wet processing of LCD and touch panels, semiconductor process, wet equipment chemical reagent Chemical industry: Chemical solvents Food industry: Beverage, alcohol
Introduction The filtration medium of ARWP series micropore membrane filter cartridge is made of PP superfine fiber membrane. It is formed by folding the combination of multi-layer filter membranes and thermally welding into 6-inch large diameter structure, providing large filtration area for stable deep filtration effect. This product is available in both external and internal pressure types, featuring high efficiency retention and high liquid flux, widely used in security filtration and pre-filtration across various industries. Specification Filter material: PP micropore filter membrane Diameter: 6" (152mm) Pore size: 1 ~ 80 micron Length: 20", 40", 60" Interface type: Multiple interface selections Gasket/O-rings: Silicone, EPDM Application General industry: Filtration of workshop water for various production processes, etc. Electronics industry: Pre-filtration for reverse osmosis systems, pre-filtration for deionized water, etc. Power plants: Filtration of makeup water, condensate water, cooling water, wastewater treatment, etc.
Introduction The ARBP series micropore membrane filter cartridge is made of polypropylene microfiber as the filtration medium. The product is formed by folding the combination of multi-layer filter membranes, achieving a stable deep filtration effect. Its large diameter design increases the filtration area, effectively reducing the quantity of filter cartridges used and the frequency of replacements, thereby lowering production costs. Due to its high flow rate and large dirt-holding capacity, this product is widely used in the filtration of liquid chemicals in the manufacturing process of LCD and touch panel, such as substrate cleaning, stripping, etching and deionized water rinsing. Specification Filter material: PP micropore filter membrane Diameter: 83 mm Pore size: 0.1 ~ 60 micron Length: 10" ~ 60 " Interface type: 226 Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Electronics industry: Wet processing of LCD and touch panels, semiconductor process, wet equipment chemical reagent Chemical industry: Chemical solvents
Construction safety glasses feature durable PC lenses with scratch-resistant and anti-fog coatings, suitable for various situations. Offering a clear field of vision, these glasses provide everyday protection and are ideal for sensitive eyes in special environments. Designed with a wrap-around frame, these glasses ensure easy storage and prevent debris from entering the eyes during outdoor activities or projects. For enhanced comfort, soft silicone pads on the temples and nose reduce pressure, allowing for extended wear. Ventilation holes in the brow bar and nose pads maintain a comfortable environment around the eyes and nose in diverse situations. Featuring removable nose pads for extended use, these glasses offer three vertical adjustment points to accommodate different nose heights. Securely fastened to a rope with small holes at the end, they provide stability during outdoor adventures or in specific environments. These glasses are suitable for use in laboratories, dental clinics, welding sites, construction sites, carpentry, lawn mowing, painting, as well as in pharmaceutical, biotechnology, and food industries.
Ceramic Membrane Module A ceramic membrane module is a complete unit composed of the ceramic membranes, housing, feed inlet, concentrate outlet, and permeate outlet. The ceramic membranes are arranged in parallel and vessel with housings. Ceramic Membrane Module JIUWU Ceramic Membrane Products SS Membrane Module JIUWU hi tech could produce the extra large housing as customer demand, such as loading over 91 pcs membranes. Titanium Membrane Module The main application of titanium module is brine filtration. PVC Membrane Module For special application, JIUWU company designs the module with different material, such as PVC and FRPP. Housing is designed with standard connectors (flange, clamp, whorl coping) to attach with incoming and outgoing piping. This includes a manifold, which directs incoming flow to all ceramic membrane elements in the housing. The housings are produced from different types of stainless steel, coated steel or plastic, titanium, as required by the application. The sealing material holds elements in the weakest place in housings. A wide array of materials (EPDM, Fluoro rubber, silicon) is available by customer's needs.
Introduction:The PCD Standard Inserts are made by imported element 6, GE raw materials, used high-precision peripheral grinder to produce high-quality PCD tools. PCD Standard Inserts are widely used in high-silicon aluminum alloy, stone and other non-ferrous metals and non-metal processing. Details Photo: Models: Applications of PCD Standard Inserts: 3c field, aerospace, automotive industry, etc. Specificationï¼?Please contact me for specific specifications Application Cases of PCD Standard Inserts: Advantages of PCD Standard Inserts: Higher metal removal rates Faster cycle times Reduce waste Quality improvement Stricter size control Perfect surface finish Increase productivity Improve equipment utilization Pack: Cartons and bubble wrap Minimum Order Quantity: Price Range: Payment: TT; Paypal; Delivery Time: Seven to ten days Sample: No free samples are provided Certification: FOB Port: Shanghai Qingdao Guangzhou
