Single-cylinder,vertical,air-cooled,4-stroke,direct injection diesel engines Model No: SJ170F (Recoil starter) Type : Single-cylinder,vertical,air-cooled,4-stroke,direct injection BoreStroke (mm): 7055 Displacement(cc): 211 Compression ratio: 21:01 Rated power/ Rated speed (Hp/r/min): 3.4/3000 3.8/3600 Max power/ Max speed (Hp/r/min): 3.8/3000 4.2/3600 Lubricating system : Pressure splashed Starting system: Recoil starter Rotation direction(face to the output axle): Anticlockwise Fuel type:0#�-10#�-20# diesel Fuel tank capacity (L)/(us.gal):2.5/0.66 Fuel consumption/related rotation speed:(g/hp.h/r/min) 209/3000 218/3600 Lube oil type: CD grade or SAE 10W-30, 15W-40 Lube oil capacity (L)/(us.gal) :0.75/0.20 Starting motor capacity (V�kW): 12V 0.8kW Charging generator capacity (V�A): 12V 3A Battery capacity (V�Ah): Above 12V 20Ah Package dimensionï¼?LWHï¼?mm: 430X370X465 Net weight(kg)¤27
Model No SJ188FE (Electric starter+Battery) Type Single-cylinder,vertical,air-cooled,4-stroke,direct injection Bore Stroke (mm) 88X86 Displacement(cc) 523 Compression ratio 19:01 Rated power/ Rated speed (Hp/r/min) 8.9/3000 10.0/3600 Max power/ Max speed (Hp/r/min) 10.0/3000 12.0/3600 Lubricating system Pressure splashed Starting system Electric starter Rotation direction(face to the output axle) Clockwise Fuel type 0# �-10# �-20# diesel Fuel tank capacity (L)/(us.gal) 5.5/1.45 Fuel consumption/related rotation speed (g/hp.h/r/min) 272/3000 280/3600 Lube oil type CD grade or SAE 10W-30, 15W-40,40CC Lube oil capacity (L)/(us.gal) 1.65/0.44 Starting motor capacity (V �kW) 12V 0.8kW Charging generator capacity (V �A) 12V 3A Battery capacity (V �Ah) Above 12V 20Ah Package dimension L W H mm 525X470X585 Net weight(kg) 53
Single-cylinder,vertical,air-cooled,4-stroke,direct injection diesel engines Model No: SJ168F (Recoil) Type : Single-cylinder,vertical,air-cooled,4-stroke,direct injection Bore�Stroke (mm): 68X54 Displacement(cc): 196 Compression ratio: 22:01 Rated power/ Rated speed (Hp/r/min): 3.0/3000 3.3/3600 Max power/ Max speed (Hp/r/min): 3.3/3000 3.6/3600 Lubricating system: Pressure splashed Starting system: Recoil starter/ Rotation direction(face to the output axle): Anticlockwise Fuel type: 0#�-10#�-20# diesel Fuel tank capacity (L)/(us.gal): 2.5/0.66 Fuel consumption/related rotation speed (g/hp.h/r/min): 315/3000 320/3600 Lube oil type: CD grade or SAE 10W-30, 15W-40 Lube oil capacity (L)/(us.gal): 0.7/0.184 Starting motor capacity (V�kW): 12V  0.8kW Charging generator capacity (V�A): 12V  3A Battery capacity (V�Ah): Above 12V 20Ah Package dimensionL�W�Hmm: 313X380X335 Net weight(kg): 20kg
Single-cylinder,ertical,air-cooled,4-stroke,direct injection diesel engines Model No SJ178F (Recoil starter) Type Single-cylinder,ertical,air-cooled,4-stroke,direct injection Bore Stroke (mm) 78 62 Displacement(cc) 296 Compression ratio 21:01 Rated power/ Rated speed (Hp/r/min) 5.0/3000 5.5/3600 Max power/ Max speed (Hp/r/min) 5.5/3000 6.0/3600 Lubricating system Pressure splashed Starting system Recoil starter Rotation direction(face to the output axle) Anticlockwise Fuel type 0# �-10# �-20# diesel Fuel tank capacity (L)/(us.gal) 3.5/0.92 Fuel consumption/related rotation speed (g/hp.h/r/min) 206/3000 215/3600 Lube oil type CD grade or SAE 10W-30, 15W-40 Lube oil capacity (L)/(us.gal) 1.1/0.29 Starting motor capacity ( �kW) 12 0.8kW Charging generator capacity ( �A) 12 3A Battery capacity ( �Ah) Aboe 12 20Ah Package dimensionï¼?L W Hï¼?mm 480X450X525 Net weight(kg)¤33
Model No SJ186FE (Electric starter) Type Single-cylinder,vertical,air-cooled,4-stroke,direct injection Bore Stroke (mm) 86 70 Displacement(cc) 406 Compression ratio 19:01 Rated power/ Rated speed (Hp/r/min) 7.7/3000 8.60/3600 Max power/ Max speed (Hp/r/min) 8.6/3000 10.0/3600 Lubricating system Pressure splashed Starting system Electric starter Rotation direction(face to the output axle) Clockwise Fuel type 0# �-10# �-20# diesel Fuel tank capacity (L)/(us.gal) 5.5/1.45 Fuel consumption/related rotation speed (g/hp.h/r/min) 206/3000 215/3600 Lube oil type CD grade or SAE 10W-30, 15W-40,40CC Lube oil capacity (L)/(us.gal) 1.65/0.44 Starting motor capacity (V �kW) 12V 0.8kW Charging generator capacity (V �A) 12V 3A Battery capacity (V �Ah) Above 12V 20Ah Package dimensionL W Hmm 525X470X565 Net weight(kg)¤51.5
High purity iron billet,electric steel, electric magnetic iron, ultra low carbon magnetic iron bar, low carbon steel ï¼?soft magnetic iron bar SUYB-1, Pure iron(SAE AMS 7707C Iron) ingot iron, iron billet,soft iron, Armco Pure iron, iron remelt ingot, Melting Grade Pure Iron Billetï¼?ASTM A848 magnetic iron(alloy 1), Iron Cathode, electrolytic iron were supplied by us, The chemical composition and physics characteristics, such as the coercive force is better than the International Standard. Our fabrication plant is equipped with large cutting machine, shearing machine, sawing machine, punch, lathe, mill machine, annealing furnace, and rattle barrel to meet the different needs of users. We check and audit the quality according to the quality certificate strictly. Trademark B-A Chemical composition %,max C 0.003 Si 0.01 Mn 0.20 P 0.012 S 0.006 Al 0.15-0.50 Cr 0.02 Ni 0.01 Cu 0.02 Trademark B-AA Chemical composition %,max C 0.002 Si 0.006 Mn 0.12 P 0.007 S 0.001 Al 0.15-0.50 Cr 0.02 Ni 0.01 Cu 0.005 Trademark B-B: C 0.003 Si 0.01 Mn 0.13 P 0.009 S 0.006 Cr 0.02 Ni 0.02 Al 0.03 Cu 0.02 Trademark B-BC: C 0.002 Si 0.01 Mn 0.08 P 0.006 S 0.005 Cr 0.01 Ni 0.01 Al 0.01 Cu 0.01 Trademark B-CC: C 0.002 Si 0.003 Mn 0.02 P 0.005 S 0.005 Cr 0.01 Ni 0.01 Al 0.005 Cu 0.004
Negative Temperature Coefficient Super Power NTC Thermistor MF74 2.5/25 2.5 OHM 25A I Description Of The Ultra Big Power NTC Thermistor MF73 The company has been passed ISO9001:2008 Quality Management System, TS16949 Quality Management System , ISO14001:2004 Environment Management System and GB/T29490 intellectual property management system. Company have AAA credit rating, Shiheng brand was awarded The famous brand of Jiangsu province and Nanjing famous brand products". As the industry key enterprise, appointed by the industry association, is involved in the drafting of the National "Thirteen five plan" . II Application Of The Ultra Big Power NTC Thermistor MF73 Power conversion, switch power, UPS power All kinds of super-power lamps Electrical heater IV Specification Of The Ultra Big Power NTC Thermistor MF73 P/N R25±20%() Max steady state current Imax(A) Approx R of Max current Rmax() Thermal time constant (mW/C) Thermal time constant (s) MF74-0.5/40 0.5 40 0.00875 118 340 MF74-1/32 1 32 0.0137 118 340 MF74-2/25 2 25 0.024 120 340 MF74-5/21 5 21 0.0364 123 350 MF74-10/18 10 18 0.0555 125 360 MF74-20/15 20 15 0.0745 125 345 V Characteristics Of The Ultra Big Power NTC Thermistor MF73 Reliable Configuration and convenient installment Have the strongest capability of surge current protection Maximum steady state operating current Persistnat operating when passing through larger steady state current VI Ampfort Advantage Of The Ultra Big Power NTC Thermistor MF73 * Product R&D and production Base * Only direct factory marketing windows * On behalf of buy ,inspection ,delivery , payment * Low cost shippment advisor * Provide technical supoort & advices freely for whole course VII Key Benefits Of The Ultra Big Power NTC Thermistor MF73 * High Power NTC Thermistor Key Benefits: * Recognized By Underwriters Laboratories For Ensured Safety * Designed To Withstand High Steady Sate Current * Absorbs And Minimizes High Input Energy * Cost Effective One Component Solution To Inrush Current * Wide Temperature Range Of Operation
High purity iron billet, electric steel, electric magnetic iron, ultra low carbon magnetic iron bar, soft magnetic iron bar suyb-1, pure iron(sae ams 7707c iron) ingot iron, iron billet, soft iron, armco pure iron, iron remelt ingot, melting grade pure iron billet, astm a848 magnetic iron(alloy 1), were supplied by us, the chemical composition and physics characteristics, such as the coercive force is better than the international standard. Our fabrication plant is equipped with large cutting machine, shearing machine, sawing machine, punch, lathe, mill machine, annealing furnace, and rattle barrel to meet the different needs of users. We check and audit the quality according to the quality certificate strictly. Chemical composition %, max Trademark b-b: C 0.003 si 0.01 mn 0.13 p 0.009 s 0.006 cr 0.02 ni 0.02 al 0.03 cu 0.02 Trademark b-bc: C 0.002 si 0.01 mn 0.08 p 0.006 s 0.005 cr 0.01 ni 0.01 al 0.01 cu 0.01 Trademark b-cc: C 0.002 si 0.003 mn 0.02 p 0.005 s 0.005 cr 0.01 ni 0.01 al 0.005 cu 0.004 Trademark B-CE C 0.002 Si 0.003 Mn 0.02 P 0.005 S 0.005 Cr 0.01 Ni 0.01 Al 0.005 Cu 0.004 Ce 0.2 min Trademark B-CL C 0.002 Si 0.003 Mn 0.02 P 0.005 S 0.005 Cr 0.01 Ni 0.01 Al 0.005 Cu 0.004 La 0.2 min Appliance of trademark from b-b to b-cc : The raw material of all kinds precise alloy(super alloy), electric alloy, soft magnet, amorphous alloy and permanent magnet such as ndfeb etc.
Model SJ100WP-186F Suction Diameter 4 inch (100mm) Discharge Diameter 4 inch (100mm) Max.Capacity (m3 / hr.) 96 Max.Head: 25m Suction Lift: 8m Self-Priming time: 180S Max Speed: 3600rpm (adjustable) Engine Model 186F Type OHV Single-cylinder, vertical, air-cooled, 4-stroke, direct injection Bore Stroke (mm) 86X70 Displacement (cc) 406 Compression ratio 20:01 Rated power / rated speed (Hp / r / min) 7.7 / 3000 9.0 / 3600 Max power / Max speed (Hp / r / min) 8.8 / 3000 10.0 / 3600 Lubricating system Pressure splashed Starting system Recoil starter Fuel type 0 #, - 10 #, - 20 # diesel Fuel tank capacity (L) / (US.Gal) C = 5.5 / 1.45 L = 12.5L / 3.3Gal Fuel consumption (g / hp.h / r / min) 201/3000 210/3600 Lube oil type CD grade or SAE 10W-30, 15W-40 Lube oil capacity (L) 1.65L / 0.44Gal Starting motor capacity (V, kW) 12V 0.8kW Charging generator capacity (V, A) 12V 3A Battery capacity (V, Ah) Above 12V 20Ah Overall dimension (L W H) mm C = 645X475X605 CL = 645X475X690 Dry weight (kg) 67 (Recoil starter) 70.5 (Electric starter)
Model SJP50WP-170FA Suction Diameter 2 inch (50mm) Discharge Diameter 2 inch (50mm) Max.Capacity (m3/hr.) 42 Max.Head: 23m Suction Lift: 8m Self-Priming time: 70S Max Speed: 3600rpm (adjustable) Engine Model 170FA Type OHV Single-cylinder �vertical �air-cooled �4-stroke �direct injection Bore Stroke (mm) 70X57 Displacement(cc) 219 Compression ratio 22:01 Rated power/ Rated speed (Hp/r/min) 3.8/3000 4.2/3600 Max power/ Max speed (Hp/r/min) 4.2/3000 4.6/3600 Lubricating system Pressure splashed Starting system Recoil starter Fuel type 0# �-10# �-20# diesel Fuel tank capacity (L)/(US.Gal) C=2.5L / 0.66Gal Fuel consumption (g/hp.h/r/min) 209/3000 218/3600 Lube oil type CD grade or SAE 10W-30, 15W-40 Lube oil capacity (L) 0.75L / 0.198Gal Starting motor capacity (V �kW) 12V 0.8kW Charging generator capacity (V �A) 12V 3A Battery capacity (V �Ah) Above 12V 20Ah Overall dimension L W H mm C=530X415X515 L=530X420X555 Dry weight(kg) 38 Recoil starter 41.5 Electric starter
Model SJ80WP-170F Suction Diameter 3 inch (80mm) Discharge Diameter 3 inch (80mm) Max.Capacity (m3/hr.) 60 Max.Head: 23m Suction Lift: 8m Self-Priming time: 120S Max Speed: 3600rpm (adjustable) Engine Model 170F Type OHV Single-cylinder �vertical �air-cooled �4-stroke �direct injection Bore Stroke (mm) 70X59 Displacement(cc) 227 Compression ratio 21:01 Rated power/ Rated speed (Hp/r/min) 5.8/3000 6.5/3600 Max power/ Max speed (Hp/r/min) 6.5/3000 7.2/3600 Lubricating system Pressure splashed Starting system Recoil starter Fuel type 0# �-10# �-20# diesel Fuel tank capacity (L)/(US.Gal) C=3.5L /0.92Gal Fuel consumption (g/hp.h/r/min) 206/3000 215/3600 Lube oil type CD grade or SAE 10W-30, 15W-40 Lube oil capacity (L) 0.75L / 0.198Gal Starting motor capacity (V �kW) 12V 0.8kW Charging generator capacity (V �A) 12V 3A Battery capacity (V �Ah) Above 12V 20Ah Overall dimension L W H mm C=565X455X540 CL=565X455X555 Dry weight(kg) 49 Recoil starter 51.5 Electric starter
Radial Leaded Ultra Big Power NTC Thermistor MF73 For Switching Power Supply I Description Of The Ultra Big Power NTC Thermistor MF73 High-Power NTC Thermistors are used to reduce the inrush current that occurs when an electrical device is switched on. High inrush current is the result of the maximum instantaneous input current drawn by an electrical device during the initial power up. As technology continues to advance, most systems today run efficiently and maintain a low impedance which in turn contributes to high inrush current. Additionally, devices that produce alternating current such as electric motors or transformers can draw several times their steady state current at switch on. Although this additional draw of inrush often lasts less than ½ of a normal 60 hertz cycle, that is enough time to cause possible damage to the equipment. II Application Of The Ultra Big Power NTC Thermistor MF73 * All kinds of power supply,UPS power supply,Switching power supply * EV charger,charging pile * Motor driver,superpower server motor driver,logic controller * High power plasma electric welder,cutting machine,super power lightning lamp * Nuclear managetic resonance equipment,super power audio power amplifier,high circle transformer * The solar panel arrays with high capacity power inverter * The industrial robot drived by high voltage power supply, intelligent electric cabinet with low voltage. IV Specification Of The Ultra Big Power NTC Thermistor MF73 Body diameter 40mm P/N R25±20%() Thermal sensitive index B±10%(K) Max steady state current Imax(A) Approx R of Max current Rmax() Max power dissipation Pmax(W) Thermal time constant (mW/C) Thermal time constant (s) Max impulse capacitance (uF)240VAC MF73-0.2/50 0.2 2600 50 0.007 25 â?¥55 â?¤350 8000 MF73-0.5/40 0.5 2600 40 0.008 6800 MF73-3/28 3 2800 28 0.02 6800 MF73-5/25 5 3000 25 0.028 4700 MF73-8/20 8 3200 20 0.034 3300 MF73-10/19 10 3200 19 0.038 3300 Body diameter 45mm P/N R25±20%() Thermal sensitive index B±10%(K) Max steady state current Imax(A) Approx R of Max current Rmax() Max power dissipation Pmax(W) Thermal time constant (mW/C) Thermal time constant (s) Max impulse capacitance (uF)240VAC MF73-0.2/65 0.2 2600 65 0.006 30 70 480 11500 MF73-0.5/50 0.5 2600 50 0.007 8000 MF73-2/40 2 2600 40 0.012 8000 MF73-5/30 5 3000 30 0.025 6800 MF73-10/24 10 3200 24 0.032 4700 Body diameter 50mm P/N R25±20%) Thermal sensitive index B±10%(K) Max steady state current Imax(A) Approx R of Max current Rmax Max power dissipation Pmax(W) Thermal time constant (mW/C) Thermal time constant (s) Max impulse capacitance (uF)240VAC MF73-0.2/80 0.2 2600 80 0.004 36 90 650 15000 MF73-0.5/60 0.5 2600 60 0.006 11500 MF73-1/56 1 2600 56 0.008 11500 MF73-3/40 3 2800 40 0.015 11500 MF73-5/35 5 3000 35 0.022 8000 MF73-6.8/32 6.8 3000 32 0.025 8000 MF73-10/27 10 3200 27 0.03 6800
Type: Tempered Glass Thickness: 3mm, 4mm; 5mm; 6mm; 8mm; 10mm; 12mm; 15mm; 19mm; 22mm; 25mm (1/8 inch to 1 inch) Size: As per customer requirements, Max raw glass size 4600mm*9000mm or 3300mm*22000mm (180*354 inch or 130*866 inch) Color: Clear, Ultra Clear, Tinted, CoatedOptional Processing: Edging, Polishing, Drilling holes, Side opening, Cut to size, Coating, Printing, Laminating Manufacturing Standard: CE, BS, SGCC, SAI, CCC, ISO MOQ: 100 square metersDeliverySample: Free sample (freight collect) available in 7 days Order Production Time: 7-20 days. Glass Package: Strong and well-packaged plywood case Shipping Methods: Ocean, Air, Train, Express delivery
0.1-1CC Dosing Valve Working pressure: Max. 180kg/square cm Suitable for: NLGI 00#-3# grease. Air pressure: 4-6kg/square cm Accuracy: �± 1% Dosing scope: 0.1-1CC Working temperature: -20 to +75 With anti-drip function Outline (1)Quantitative precision fluid metering valve, Quantitative spit valves, Its Volumetric quantification Principle quantitative valves. (2)Quantitatively accurate, adjust the Amount of convenient, simple control (3)Widely used in electronics, machinery, Pharmaceuticals, automotive, Ship, food, cosmetics and other industries. Feature (1)For a variety of medium, high and ultra-high Viscosity media quantitative filling (2)For a variety of piston pumps, screw pumps, Gear pumps and other feeding system (3)Unaffected by pressure fluctuations filling quantity (4)Two five-way valve to control their work to do
TEMPERATURE CONTROLLER T-MAX XTRWB-3G Dongfang Yoyik Engineering Co., Ltd is a manufacturer and trader of industrial products. We mainly offer spare parts of turbines and generators. Kinds of pumps for EH system, valves, filters and filter elements, and other industrial tools and replacements. Our products and service are quality guaranteed. Yoyik can offer many spare parts for power plants as below: #DF-TEMPERATURE CONTROLLER T-MAX XTRWB-3G-DF oil pressure transducer ST307-350-B speed sensor SMCB-02-16L80 level ultrasonic sensor UHZ-10007B1000T1.1DN25PN16V LVDT Sensor 191.36.09.10 Solenoid valve 4V310-10 Ignition gun EHE-20-B-1-18H-S Eddy Current Sensor PR6422/104-030 Eddy Current Sensor PR6422/000-030 Current transducer WBI414S01 Axis vibration module DF2062 CARD MODULE 2SC5010-9CE10-3AA4-Z Eddy Current Sensor PR6424/102-001 temperature element pt100 WZPM2-08-78-M18-S flowmeter PHOSPHATE ESTER Coal flow sensor XD-TH-2 Steam turbine bolt electric heating rod 05B27A Bolt electric heating rod ZJ-20-27 speed sensor CS-1H-G-100-05-02 VACUUM SWITCH 4NN-EE4-N4-C2A 0.014-0.17Mpa speed sensor DSD1820.19S22HW Sensor DF311180-90-08-02 SPRING CHARGING MOTOR HDZ-20900A analog pressure switch MPFILT0.5MPA Eddy Current Sensor PR6423/003-031 main controller ZKE-DJZ03(380)-08B Signal processing board XHB-2 lvdt linear 3000TDZ-A Power board ME8.530.031 V1.514.6 most energy efficient electric heater RJ-8-250 Pulse forming module ADAM-5081S electrical proximity sensor CWY-DO-810804-00-05-10-02 Eddy Current Sensor PR6422/003-041 LVDT Sensor FRD.WJA2.602H-100 Eddy Current Sensor PR6424/119-130 contactless position sensor ZDET600B Digital sensor display instrument TDZ-1L TEMPERATURE CONTROLLER T-MAX XTRWB-3G TEMPERATURE CONTROLLER T-MAX XTRWB-3G MY-DFYL-2024-6-6
M4000 Optical Emission Analyzer for Alloy Analysis M4000 optical emission analyzer for alloy analysis creatively combined with world leading argon circulation technology enables the analysis of Fe, Al, Cu and other bases materials.Emission analyzer is an ideal solution to fast and accurate quantitative analysis near the furnace, metal material quality control and scientific research. Optical System Paschen-Runge optical system Mult-CCD detectors with high resolution Wavelength range: 175-520nm Optics sealed argon circulation system Spark Stand Open sample clamp Easily operated sample clamp adapted to different sample geometrics Optimized argon circuit design Easy to clean and maintenance Excitation Source Programmable pulse digital source Maximum discharge frequency: 1000 Hz Maximum discharge current: 400 A Spark ignition pulse1-14kV Spark excitation pulse20-230V Arc excitation pulse20-60V Excitation Hole:13mm Argon Requirement Purity requirement99.999% Input pressure0.5MPa Max 3.5L/min in sparking Average standby flow: 1L/min Electrical and Environmental Requirement AC220V±20V,50Hz Max 400VA in sparking Average standby power 50VA Room temperature: 1030 Storage temperature045 Relative humidity: 20%80% M4000 Alloy Analyzer Model ModelWavelengthDescription M4000 N175-520 nmAvailable for bases such as Fe, Al, Cu M4000 S200-520 nmAvailable for bases of Al, Cu Supply optical emission analyzer for alloy analysis, emission analyzer, optical analyzer, alloy analyzer in China. Alloy analyzer is an ideal solution to fast and accurate quantitative analysis near the furnace, metal material quality control and scientific research
High purity iron billet,electric steel, electric magnetic iron, ultra low carbon magnetic iron bar,soft magnetic iron bar SUYB-1, Pure iron(SAE AMS 7707C Iron) ingot iron, iron billet,soft iron, Armco Pure iron, iron remelt ingot, Melting Grade Pure Iron Billet,ASTM A848 magnetic iron(alloy 1), were supplied by us, The chemical composition and physics characteristics, such as the coercive force is better than the International Standard. Our fabrication plant is equipped with large cutting machine, shearing machine, sawing machine, punch, lathe, mill machine, annealing furnace, and rattle barrel to meet the different needs of users. We check and audit the quality according to the quality certificate strictly. Trademark B-A Chemical composition %,max C 0.003 Si 0.01 Mn 0.20 P 0.012 S 0.006 Al 0.15-0.50 Cr 0.02 Ni 0.01 Cu 0.02 Trademark B-AA Chemical composition %,max C 0.002 Si 0.006 Mn 0.12 P 0.007 S 0.001 Al 0.15-0.50 Cr 0.02 Ni 0.01 Cu 0.005 Trademark B-B: C 0.003 Si 0.01 Mn 0.13 P 0.009 S 0.006 Cr 0.02 Ni 0.02 Al 0.03 Cu 0.02 Trademark B-BC: C 0.002 Si 0.01 Mn 0.08 P 0.006 S 0.005 Cr 0.01 Ni 0.01 Al 0.01 Cu 0.01 Trademark B-CC: C 0.002 Si 0.003 Mn 0.02 P 0.005 S 0.005 Cr 0.01 Ni 0.01 Al 0.005 Cu 0.004 Type mm : Medium plate and steel billet 8-250 ,plate coil 12-25 ,straight round steel dia6.5-dia300 ,round steel coil,cold drawn plate coil 0.5-2.5 tube,etc. We can produce the special type which you ask application: a.make it in electric core.heel piece, gag bit in electric appliance device,telecommunication b.Electric core of electric iron c.Electromagnetic part of instruments and meters d.Iron core and shell of direct-current dynamo e.Electric part or magnetic part for car,tractor,lathe f.Magnetic shielding apparatus Charateristic 1 .good electromagnet character.Coercive force(Hc)low,high magnetic permeability. high saturation induction density Bs .stable magnet and no magnetic aging 2 high pure,electric pure iron,is full killed steel,refine,so the density is high,average,good,little gas, this is a reliable condition that customer simplify and cut down the anneal process of the parts. 3 cold drawn,hot roll,forge.Cold process,these is no problem such as lathe,drill,punch,bend,drawn.Hot process,such as forge,roll,there is little redsear sensibility,it is a good condition for doing in a large degree scope. International standard trademark coercive force Hc A/m oe not more than coercive force aging Hc A/m oe not more than Max.magnetic conductivity H/m Gs/Oe * not less than magnetic strength T Gs not less than B-A 48.0 0.6 4.8 0.06 11.3 9000 B200 B300 B500 B1000 B2500 B5000 B10000 1.20 12000 1.30 13000 1.40 14000 1.50 15000 1.62 16200 1.71 17100 1.80 18000 magnetic aging:keep 100 degree for 100 hours or Condition is 790 degree after 2 hours, after cooling with the furnace .
Au uk us eu jp kr cn sk05t plug in ac-dc power supplies Sk05t series power supply adapter (48w) Our adapters have passed the energy efficiency level vi !! Product features: 1). Ultra-small size, light weight, streamline, fully sealed and easy to carry; 2). Low-cost design, high reliability, ultrasonic lamination; 3). Built-in over voltage, over current and short circuit protection; 4). Input characteristics: voltage :100-240vac ± 10%; frequency: 50/60hz; current: 0.35a max; Starting time: 3s max; inrush current: 20a/240vac max; 5). Output characteristics: constant voltage mode, high precision, low noise;hold up time: 20ms min; 6). Environmental: operating temperature: 0 °c -40 °c, 5% -90% rh; Storage temperature: -20 °c -85 °c, 5% -95% rh; 7). Cooling mode: natural cooling; 8). Energy efficiency accordingly: erp / cec-vi standard; 9). Safety standards: iec/en/ul60950;ul 62368 10).Meet rohs standards; 11).Pin type: ul / ccc / vde / bs / saa / kc / pse; 12).Average failure rate: 50, 000 hours; 13).Electrical characteristics: (see below sheet) Model I/p condition Output(v) Output(a) Output(w)max
Laminated glass is safety glass with interlayer film between two or more pieces of glass. It reduces damage, lowers noise, and blocks UV. For a further introduction about it, please visit VSOM's post: Laminated Glass Introduction. VSOM offers laminated glass wholesale from two-layers to six-layers, thickness from 3mm to 19mm. Specification: Laminated Glass Thickness: 3mm+3mm; 4mm+4mm; 5mm+5mm; 6mm+6mm; 8mm+8mm; 10mm+10mm; 12mm+12mm;15mm+15mm; 19mm+19mm (Customizable) Size: As per customer requirements, Max raw glass size 4600mm*9000mm and 3300mm*16000mm Interlayer: SGP/ PVB/ EVAColor: Clear/ Ultra Clear/ Tinted/ Coated ColorOptional Processing: Cutting to size, Edging, Drilling holes, Side opening, Tempering, Coating, Printing Manufacturing Standard: CE, BS, SGCC, SAI, CCC MOQ: 100 square metersDelivery Sample: Free sample (freight collect) available in 7 days Order Production Time: 7-20 days Glass Package: Strong and well-packaged plywood case Shipping Methods: Ocean; Train; Air; Express delivery
PSC-T54U Infrared Pyrometer for Glass Industry Applications PSC-T54U Non-Contact Infrared Pyrometer Description The digital PSC-T54U is designed specifically for glass surface applications. Offering a wide temperature range from 350 to 1200'C, it is essential for thin glass surface measurement. The robust and compact stainless steel housing ensures operation under even the most difficult ambient conditions. With a minimum response time of only 60 ms, the PSC-T54U is ideal for fast measuring tasks and spot sizes from 5mm. The standard 0/4 to 20 mA linear output signal allows seamless integration into existing measurement and control systems. The PSC-T54U boasts a galvanically isolated RS-485 interface and therefore is bus-compatible and uses Modbus RTU protocol. PSC-Spot software enables simple parameter adjustment of emissivity, sub temperature ranges, response time and data storage when joined to a PC through an RS-485 to USB connection. PSC-T54U Non-Contact Infrared Pyrometer Features * Designed for non-contact temperature measurement of ultra-thin glass < 1mm thickness * Temperature Range: 350 to 1200'C * High Resolution Optics - Field of View 70:1 * Compact, Rugged Stainless Steel Housing with Protective Hardware for Harsh Environments * Digital RS-485 and Analog 4-20mA Interfaces for Ease of Installation in Existing Measurement & Control Systems * Worldwide Application Specialist Support PSC-T54U Non-Contact Infrared Pyrometer Specifications * Temperature Range: 350 to 1200'C (662 to 2192'F) * Spectral Range: 7.8um * Accuracy: 0.6% of Measured Value in 'C or 1K * Reproducibility: 0.3% of Measured Value in 'C or 0.5K * Output: 0/4 to 20 mA, Temperature Linear, Max Load 700 ohm * Power Requirement: 24 V DC ±25%, Residual ripple 500 mV * Power Consumption: Max. 1.5W * Operating Temperature: 0 to 70'C (32 to 158'F)
