M4000 Optical Emission Analyzer

M4000 Spark Oes Optical Emission Spectroscopy M4000 Spark Oes Optical Emission Spectroscopy creatively combined with world leading argon circulation technology enables the analysis of Fe, Al, Cu and other bases materials. Spark Oes Spectrometer is an ideal solution to fast and accurate quantitative analysis near the furnace, metal material quality control and scientific research. Optical System  Paschen-Runge optical system  Mult-CCD detectors with high resolution  Wavelength range: 175-520nm  Optics sealed argon circulation system Spark Stand  Open sample clamp  Easily operated sample clamp adapted to different sample geometrics  Optimized argon circuit design  Easy to clean and maintenanceExcitation Source  Programmable pulse digital source  Maximum discharge frequency: 1000 Hz  Maximum discharge current: 400 A  Spark ignition pulseï1-14kV  Spark excitation pulseï20-230V  Arc excitation pulseï20-60V  Excitation Hole:13mm   Argon Requirement  Purity requirementï99.999%  Input pressureï0.5MPa  Max 3.5L/min in sparking  Average standby flow: 1L/min  Spark Oes Optical Emission SpectroscopyïSpark Oes Spectrometer, high quality oes spectroscopy low price Electrical and Environmental Requirement  AC220V±20V,50Hz

1) Introduction: Gasboardâ??5020 can be used for measurement of the concentration of automobile emission gas CO ,CO2 ,HC ,O2 and NO (optional), based on NDIR technology. This analyzer is designed with portable and smaller physical dimensions. The general application is for automobile emission check station or car repair garage. 3) Features: .Proprietary Infrared(NDIR) gas sensor .Can measure gas concentration of CO ,HC ,CO2 ,O2 ,NO (optional) simultaneously .With 320*240 LCD real time display .Air/fuel ratio calculation and display automatically. .Auto-zero calibration with air .Oil temperature and RPM interface. .Plug in Printer optional. .RS-232 interface and optional software.

Diesel vehicle exhaust gas analyzer (can also be used in gasoline vehicle), belong to customized products, non standard. Increase the reverse blowing system and filtering, purifying device. Can be used for the detection and analysis of diesel oil as fuel of vehicle exhaust emissions group points. ã??Main technical parametersã?? exhaust gas analyzer measuring range COï¼?0ï½?10.0 10-2(%) CO2ï¼?0ï½?20.0 10-2(%) HCï¼?0ï½?9999 10-6(ppm) O2ï¼?0ï½?25.0 10-2(%) NOï¼?0ï½?5000 10-6(ppm) oil temperatureï¼?18ï½?150 speedï¼?100ï½?20000rpm resolving power COï¼?0.01% CO2ï¼?0.1% HCï¼?1ppmO2ï¼?0.01% NOï¼?1ppm oil temperatureï¼?0.1 speedï¼?1rpm Repetitive error â?¤±2% Zero drift COï¼?±0.06 10-2(%)/4h CO2ï¼?±0.5 10-2(%)/4h HCï¼?±30 10-6(ppm)/4h O2ï¼?±0.5 10-2(%)/4h NOï¼?±30 10-6(ppm)/4h Distance drift No more than shown value error allowed (4 hours) Indication error COï¼?±5%ï¼?absolute errorï¼?±0.03 10-2 ï¼? CO2ï¼?±5%ï¼?absolute errorï¼?±0.5 10-2ï¼? HCï¼?±5%ï¼?absolute errorï¼?±10 10-6 ï¼?±5%ï¼?absolute errorï¼?4001ï½?10000ppmï¼? O2ï¼?±5%ï¼?absolute errorï¼?±0.1 10-2ï¼? NOï¼?±4%ï¼?absolute errorï¼?±25 10-6ï¼? environment condition oil temperatureï¼?±2ï¼?relative errorï¼? speedï¼?±1.0%ï¼?relative errorï¼? temperatureï¼?0ï½?40 humidityï¼?â?¤80% atmospheric pressureï¼?60ï½?105KPa Power Supplyï¼?AC 220V±10%ï¼?50Hz±1Hz(Automobile power supply inverter) Preheating time 10min Weight Measurement unitï¼?10Kg vice machineï¼?3Kg Volume Measurement unitï¼?610 * 500 * 330mm Auxiliary machine:500 * 350 * 330mm Sampling method Exhaust gas: direct sampling, sampling tube length 5m, sampling probe length 900mm; Temperature: the temperature measuring head into the engine lubrication oil scale hole, insert the oil rod and the length of the same length, rubber stopper blocked, to prevent oil jet and wire length: 5m; Speed: the tachometer speed clip in high pressure flexible gasoline engine, can determine the speed of a gasoline engine. Display mode LCD large screen liquid crystal display major function 1)Meet GB18285-2005 national standard requirements, measurement of motor vehicle gasoline engine emissions of HC, CO, CO2, O2 and NO concentrations,Of HC, Co, CO2, the advanced NDIR regardless of light and infrared analysis technology (imported from movement detection equipment to meet the requirements of national standard OIMLR99 0 level precision, high precision, strong stability) and of O2 and no by the new electrochemical analysis technology for detection. 2)With idle speed, double idle test function; 3)Auto calculation shows that the excess air coefficient isï¼? 4)Equipped with RS-232C digital serial communication interface, convenient networkingï¼? 5)Matching speed and temperature measurement functionï¼?

M4000 Spark Oes For Material Testing M4000 Spark Oes For Material Testingcreatively combined with world leading argon circulation technology enables the analysis of Fe, Al, Cu and other bases materials. Spark oes( oes testing) is an ideal solution to fast and accurate quantitative analysis near the furnace, metal material quality control and scientific research, oes material testing. Optical System Paschen-Runge optical system Mult-CCD detectors with high resolution Wavelength range: 175-520nm Optics sealed argon circulation system Spark Stand Open sample clamp Easily operated sample clamp adapted to different sample geometrics Optimized argon circuit design Easy to clean and maintenanceExcitation Source Programmable pulse digital source Maximum discharge frequency: 1000 Hz Maximum discharge current: 400 A

M4000 Spark OES Spectrometers for Alloy Analysis M4000 Spark OES Spectrometers creatively combined with world leading argon circulation technology enables the analysis of Fe, Al, Cu and other bases materials.High quality OES is an ideal solution to fast and accurate quantitative analysis near the furnace, metal material quality control and scientific research. Optical System Paschen-Runge optical system Mult-CCD detectors with high resolution Wavelength range: 175-520nm Optics sealed argon circulation system Spark Stand Open sample clamp Easily operated sample clamp adapted to different sample geometrics Optimized argon circuit design Easy to clean and maintenanceExcitation Source Programmable pulse digital source Maximum discharge frequency: 1000 Hz Maximum discharge current: 400 A Spark ignition pulseï¼?1-14kV Spark excitation pulseï¼?20-230V Arc excitation pulseï¼?20-60V Excitation Hole:13mm high quality OES, Spark OES Spectrometers, spark oes for sale Argon Requirement Purity requirementï¼?99.999% Input pressureï¼?0.5MPa Max 3.5L/min in sparking Average standby flow: 1L/min

M5000 Metal Alloy Analyzer Spectrometer Introduction M5000 metal alloy analyzer is a compact desktop spectrometer for metal analysis based on CCD technology. metal analyzers design combines high performance with rugged construction and operational convenience with reliable operation. The programmable digital spark source, optimized optical system, auto spectrum correction, digital controlled and data capturing and durable spark stand enable you to obtain fast, reliable and accurate result for metal analysis. M5000 spectrometer metal analyzer has established itself well in China market and keeps offering high performance with minimal operating costs. It covers the wavelength range 140nmï½?680nm,permitting the analysis of all elements required by the metals industry. Pre-defined calibrations are set up in factory and can be adjusted to fit special analyzing requirements. M5000 is built under strict manufacturing and quality control procedures with ISO 9001.

M5000 Stationary Metal Material Testing Analyzers Introduction M5000 stationary metal material testing analyzersis a compact desktop spectrometer for metal analysis based on CCD technology. Metal material analyzer design combines high performance with rugged construction and operational convenience with reliable operation. The programmable digital spark source, optimized optical system, auto spectrum correction, digital controlled and data capturing and durable spark stand enable you to obtain fast, reliable and accurate result for metal analysis. M5000 metal testing analyzershas established itself well in China market and keeps offering high performance with minimal operating costs. It covers the wavelength range 140nmï½?680nm,permitting the analysis of all elements required by the metals industry. Pre-defined calibrations are set up in factory and can be adjusted to fit special analyzing requirements. M5000 is built under strict manufacturing and quality control procedures with ISO 9001. Metal analyser,metal material analyzer,metal testing analyzershot sale - M5000 Metal Analyzer M5000 Metal AnalyserModel

M5000 Spectrometer for Metal Trace Analysis Introduction M5000 spectrometer for metal trace analysis is a compact desktop spectrometer for metal analysis based on CCD technology. spectrometer for metal analysis design combines high performance with rugged construction and operational convenience with reliable operation. The programmable digital spark source, optimized optical system, auto spectrum correction, digital controlled and data capturing and durable spark stand enable you to obtain fast, reliable and accurate result for metal analysis. M5000 has established itself well in China market and keeps offering high performance with minimal operating costs. It covers the wavelength range 140nmï½?680nm,permitting the metal analysis of all elements required by the metals industry. Pre-defined calibrations are set up in factory and can be adjusted to fit special analyzing requirements. M5000 is built under strict manufacturing and quality control procedures with ISO 9001.

Supplier: Springs, heavy industrial equipments, cables, sound cables, data cables, flat cables, scraps, special industrial equipments, railway equipments, gas station equipments
Services: Transportation, shipping
Buyer: Springs, heavy industrial equipments, cables, sound cables, data cables, flat cables, scraps, special industrial equipments, railway equipments, gas station equipments