1-Ash content..... 0.14%max 2-Mass fraction of sulphur.... 0.5max 3-Temperature of solidification.... 25� C max 4-Kinematics viscosity.... 118max 5- water content.... 0.5%max 6- Mechanical impurities... 0.1%max 7- Hydrogen sulphide content Hâ??S ppm..... 0.5max 8- Carbon residual.... 7%max 9- Aluminium (Al) ppm.... 5 max 10- silicone (si)..... 12 max 11- sodium (NA).... 15max 12- Asphaltene m/m... 3.6%max 13- lnltial Bolling Point deg.... 216�°C 14- Final Bolling Point deg.... 550C 15- percent recovered.... 78%vol 16- Residual.... 22%vol 17- Total Nitrogen... 0.192%m/m
En590 diesel (10ppm / 50ppm / 500ppm) rental tanker, lng, lpg, compressed natural gas automotive gas oil (ago), virgin fuel oil d6, diesel d2, euro 4, gasoline 87,89,93,95 octane, light cycle oil export, espo blend crude oil, base oil, fuel oil cst_180, diammonium phosphate (dap), petroleum coke, jp54 aviation, jet a1 fuel, aviation turbine, urea granular, m 100 gost, bitumen , steam coal, andesit pyrophyllite, feldspar, bauxite.
SPECIFICATION: UREA 46% NITROGEN GRANULAR UREA CARBAMIDE, CARBONLYDIAMIDE, AGRICULTURAL GRADE, GRANULAR, STANDARD according to GOST 2081-92, MARK B a. PACKING: in bulk or bags / 50 KG b. SPECIFICATION: SPECIFICATION UREA46% GRANULAR GOST 2081-92 Product UREA N46 agriculture grade Nitrogen 46% minimum Moisture 0.5 max Free ammonia 160 PXT PPM maximum BIURET 1.0% maximum Harmful substances 100 % free from harmful substances Melting point 132 degree Celsius Granulation 1mm to 4mm 90% minimum Color White standard or white pure Odor Odorless Boiling Decomposes before boiling Radiation Non-radioactive Physical state Solid@20�°C, 101 KPA white granules Specific gravity Solid@20�° C-1.35 t/ms Floatability in water Sinks and mixes Molecular weight 60.065 Fertilizer granular 94-96%min Prill 96% max Fisher 0.30%
HS Code 73021090 PRICE = US$ 250 CIF ORIGIN: SOUTH AFRICA MIN ORDER: 200 TONS PACKAGE: CONTAINERS Standard & Grade 100% Used Rail (R50-R65) with specifications as per mentioned below:. CHEMICAL COMPOSITION: C 0.54 0.82 Si 0.18 0.40 Mn 0.60 1.05 S 0.04 max P 0.035 max As 0.01 max of Mass share Norms R-50 GOST-7173-75 and R-65 GOST-8165-75 R50 (51.67 KG/M) GOST 7173-75 R65 (64.72 KG/M) GOST 8165-75 These scraps consist of R50-R65 of Rails as R50 (51.67Kg/M Gost-7173-75), R65 (64.72Kg/M Gost-8165-75) According to Incoterm 2000. The Rails shall conform to ISRI CODE R50-R65 and will be Used Rail Steel Scrap- Standard section Rails. Materials will be, free from Mud, Dust, Fluff, Non-Ferrous inclusion, excessive rust, and other impurities. Free from any substance and coatings any organic waste and other harmful substances. Dirt, Dust Rust fluff and other immunity not allowed.
Petroleum products (nonsanctioned origin) jet a1 fuel, en590 10ppm, liquified natural gas (lng), liquified petroleum gas (lpg), d6 virgin fuel oil, urea 46% prilled & granular, mazut m100 75/99, gasoline 92/95/98, light cycle oil (lco), petroleum coke 4% / 2% sulphur, espo, bitumen, diesel gas oil 50ppm, base oils cst, marine gas oil, naptha, methanol, feel free to ask about other petroleum products..We serve as agents for mandates for petroleum refineries in the middle east and central asia.
Dextrose Anhydrous Dextrose anhydrous is glucose of vegetable origin, obtained through enzymatic hydrolysis of cornstarch (Not genetically manipulated, absence of GMO). Its sweetener power (in 10%m/m solution) is equivalent to the 75% of the sucrose. Dextrose anhydrous Cas No:50-99-7 Appearance: white powder Quality stanrdard: GMP/BP/USP/FCC Usage in food and pharmceutical Allergenics: Dextrose Anhydrous contains none of the ingredients of the list of allergenics of the EC. Packing and Transportation: Adopting the package of 25kg/bag with net Kraft bag and PE inner. The transportation shall be in accordance with the requirement of general chemicals. Usage: Dextrose Anhydrous is known as a healthsugar, and has broad applications in the pharmaceutical industry; It is used in very many oral re-hydration salts, because of its taste-masking and quick energy properties; It is the best choice for water-sensitive systems such as chocolate because of its low moisture content. Dextrose Anhydrous Pyrogen Free is directly used for IV-Solution. Storage: Dextrose anhydrous Store in a cool, dry, ventilated environment. Dextrose anhydrous Cas No:50-99-7 Appearance: white powder Quality stanrdard: GMP/BP/USP/FCC Usage in food and pharmceutical
Petrochemicals products like aviation kerosene colonial grade 54 jet fuel aviation turbine jet a 1, en590 diesel, gasoil 500ppm, gasoil d2, en590 10ppm euro5, gasoline octane 95, mazut m100 75, petroleum coke, virgin d6 fuel oil, light cycle oil (lco) blend crude oil [rebco], liquefied petroleum gas (lpg), liquefied natural gas (lng) bitumen 60/70, urea 46% n granular, prilled urea 46% n, urea 46% n granular agricultural grade, dap fertilizer, diesel d6 virgin low pour fuel oil.Sourcing agents
Cassava is the third largest source of food carbohydrates in the tropics, after rice and maize.Cassava is a major staple food in the developing world, providing a basic diet for over half a billion people.It is one of the most drought-tolerant crops, capable of growing on marginal soils. Nigeria is the world's largest producer of cassava, while Thailand is the largest exporter of dried cassava. Cassava Starch contains typical large oval spherical granules; their size ranges between 5 and 100 �¼m. Potato starch is a very refined starch, containing minimal protein or fat. This gives the powder a clear white colour, and the cooked starch typical characteristics of neutral taste, good clarity, high binding strength, long texture and a minimal tendency to foaming or yellowing of the solution
SWEET POTATO STARCH ------------------------------------- Potato starch is starch extracted from potatoes, contains typical large oval spherical granules ranging in size from 5 to 100 �¼m. Potato starch is a refined starch, containing minimal protein or fat. This gives the powder a clear white colour, and the cooked starch typical characteristics of neutral taste, good clarity, high binding strength, long texture, and minimal tendency to foaming or yellowing of the solution. Starch derivatives are used in many cooking recipes, for example in noodles, wine gums, cocktail nuts, which is used to keep the cake moist and give a soft texture. It is also occasionally used in the preparation of pre-packed grated cheese, to reduce sweating and binding.
item value Style Fresh Type Carrot Product Type Umbelliferous Vegetabless Variety fresh carrot Cultivation Type COMMON Color ORANGE RED Weight (kg) 100 Place of Origin South Africa Product name: new fresh red carrot 1) nutritious, attractive in color, good for health 2) no cracks or violet top Supply period From May to next March Fresh season: from May to October Cold storage season: from January to May Harvest time May, October Supply capacity yearly:6000mts. Exporting standard and quality: Washed, polished, intact firm, red color, no cracks, no side roots Size:S: 80g-150g, M: 150g-200g, L: 200g-250g, 2L: 250g-350g, 3L: above 350g varieties Fresh carrot Packing:Inner packing: PE preservative bags Outer packing: 10kg/ctn, 20kg/ctn According the buyersâ?? requirements Quantity/conveyance 24MT-26MT/ 40â?? FCL Transporting and store in coldstorage temperature 0�°â?? 3�° Payment term:
Specifications Palm Fatty Acid Distillate (PFAD) Palm Fatty Acid Distillate (PFAD) is made from refining crude palm oil. It is used for many industries such as soap industries, animal food industries and also is used as raw materials for bio-diesel and chemical industries.PFAD is a by-product from the palm oil production, PFAD has considerable value, and is more or less 100% utilized. It is used as feedstock for many different products for animal feeds, laundry soaps, the oleochemical industry, and combustion for local power/process heat2 PFAD is also a source of vitamin E, squalene and phytosterols - substances valuable for the nutraceutical (dietary supplements and functional foods) and cosmetic industries. These substances may be extracted and isolated from PFAD. Typical Specification : FFA : 70% Min M&i : 1.0% Max TFM : 95% Min Packing : 185 KGS Nett In Used Steel Drums Minimum Order : 18.130 MTS (1 x 20' GP Container) We offer the below products: Used Cooking Oil(UCO) Used Vegetable Oil Sesame Oil Corn Oil Vegetable oil Soy bean Oil Sunflower oil Jatropha Oil Palm Oil CP8 CP6 CP10 Crude Rapeseed oil and many more
Product : Long Radius Bend Brand : Renaissance Pipe Fitting Inc. Sizes : Refer the specification Condition : New Rating : 4.6, based on 23 reviews price : Start from 10 USD RFP India is a well-known exporter, manufacturer and supplier of Long Radius Bends Butt Weld Pipe Fittings worldwide in the steel market industry. The purpose of Radius Pipe Bends is to amend the direction and flow through 180 degree angle. Coming in two important forms of Bends short radius bend and long radius bend to which both of them are having a midpoint-to- midpoint length, along with double the indistinguishable 90 degree elbow. The most important application for these pipe fittings is in heater coils and heat exchangers. Long Radius Pipe Bends Butt Weld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. They are quite unproblematic to remove and install, and can be accessible to our customers in diverse technical specifications of sizes and threading as per necessity. Standard : ANSI/ASME, MSS, JIS, DIN, BS etc TYPE : SEAMLESS / WELDED/ FABRICATED RANGE : 2"NB TO 18"NB IN SCH: 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75 FORM : Long Radius Bend, Industrial Long Radius Bend, Piggable Bend, Induction Bend Radius( R ) : 3D, 5D, 6D, 8D, 10D & 20D. Stainless Steel Long Radius Bends : Standard : ASTM / ASME A/SA 403 GR WP "S" "W" " WX" Grade : 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L Duplex Steel Long Radius Bends : Standard : ASTM / ASME SA 815 Grade : UNS NO.S 31803, S 32205 Aluminium Long Radius Bends : Standard : ASTM / ASME SB241 Grade : 3003 H18 , 3003 H112, 6061 T6, 6063 T6, 6351 T5, 6351 T6
Product:ASME Socketweld threaded fittings tee Brand:Renaissance Pipe Fitting Inc. Sizes:Refer the specification Condition:New Rating:4.4, based on� 49� reviews price:Start from� 20� USD Standard : ANSI/ASME, MSS, JIS, DIN, BS etc. TYPE : Socket Weld (S/W) & Screwed (SCRD) â?? NPT, BSP, BSPT RANGE : Forged Fittings 15 NB to 100 NB in 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS available with NACE MR 01-75. FORM : Equal Tee, Reducing Tee, Cross Tee, Stainless Steel Forged Tee : Standard� : ASTM / ASME A/SA 182 Grade� : F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L Duplex Steel Forged Tee : Standard� : ASTM / ASME A/SA 182 Grade� : F 44, F 45, F51, F 53, F 55, F 60, F 61 Aluminium Forged Tee : Standard� : ASTM B247, B361. Grade� : 2024, 6061, 6063, 6101, 7075. Titanium Forged Tee : Standard� : ASTM B381. Grade� : Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23 Carbon Steel Forged Tee : Standard� : ASTM A 105/A694/ A350 LF3/A350 LF2. Grade� : F42/46/52/56/60/65/70 Low Temperature Carbon Steel Forged Tee : Standard� : ASTM A 350 LF2 / A350 LF3 Alloy Steel Forged Tee : Standard� : ASTM A182 Grade� : F1/F5/F9/F11/F22/F91 Copper Alloy Forged Tee : Standard� : ASTM / ASME SB 61 / 62 / 151 / 152. Grade� : UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640 Nickel Alloy Forged Tee : Standard� : ASTM / ASME SB 564 / 160 / 472 â?¢ Nickel 200 â?? UNS N02200 � � â?¢ Nickel 201 â?? UNS N02201 � � â?¢ Monel 400 â?? UNS N04400 â?¢ Monel K500 â?? UNS N05500 � � â?¢ Inconel K600 â?? UNS N06600 � � â?¢ Inconel 601 â?? UNS N06601 â?¢ Inconel 625 â?? UNS N06625 � � â?¢ Inconel 800 â?? UNS N08800 � � â?¢ Inconel 800H â?? UNS N08810 â?¢ Inconel 825 â?? UNS N08825 � � â?¢ Hastelloy C276 â?? UNS N10276 � � â?¢ Alloy 20 â?? UNS N08020 Other : â?¢ Hydraulic Fittings � � � � â?¢ Instrumentation Fittings Test Certificate : Manufacturer Test Certificate as per EN 10204 / 3.1 Types Of Forged Tee â?¢ SS 310 / 310S Forged Tee â?¢ Duplex Steel UNS S31803 Forged Tee â?¢ Stainless Steel 304 / 304L Forged Tee â?¢ Duplex Steel Forged Tee â?¢ Stainless Steel 316 / 316L Forged Tee â?¢ Duplex Steel UNS S32205 Forged Tee â?¢ Stailess Steel 321 / 321H Forged Tee â?¢ Super Duplex UNS S32750 Forged Tee â?¢ Monel 400 Forged Tee â?¢ Hastelloy C276 Forged Tee â?¢ SS Forged Tee â?¢ Steel Forged Tee â?¢ Inconel 625 Forged Tee â?¢ Alloy 20 Forged Tee â?¢ Cu-Ni 70/30 (C71500) Forged Tee â?¢ Cu-Ni 90/10 (C70600) Forged Tee â?¢ ASTM A105 Forged Tee â?¢ ASTM A350 LF2 / LF3 Forged Tee â?¢ Inconel 600 Forged Tee â?¢ Hastelloy B2 Forged Tee â?¢ SS 317 / 317L Forged
Product: Forged Fittings Brand: Renaissance Pipe Fitting Inc. Sizes: Refer to the specification Condition: New Rating:4.8, based on� 22� reviews price: Start from� 10� USD TYPE : Socket Weld (S/W) & Screwed (SCRD) â?? NPT, BSP, BSPT RANGE : Forged Fittings 15 NB to 100 NB in 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS available with NACE MR 01-75. FORM : Elbow, Tee, Union, Coupling, Cap, Nipple, Bush, Plug, Hydraulic Fittings Features : Dimensional accuracy, Corrosion resistance, Excellent finish, High efficiency, Durable, Stainless Steel Forged Fittings : Standard� : ASTM / ASME A/SA 182 Grade� : F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L Duplex Steel Forged Fittings : Standard� : ASTM / ASME A/SA 182 Grade� : F 44, F 45, F51, F 53, F 55, F 60, F 61 Aluminium Forged Fittings : Standard� : ASTM B247, B361. Grade� : 2024, 6061, 6063, 6101, 7075. Titanium Forged Fittings : Standard� : ASTM B381. Grade� : Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23 Carbon Steel Forged Fittings : Standard� : ASTM A 105/A694/ A350 LF3/A350 LF2. Grade� : F42/46/52/56/60/65/70 Low Temperature Carbon Steel Forged Fittings : Standard� : ASTM A 350 LF2 / A350 LF3 Alloy Steel Forged Fittings : Standard� : ASTM A182 Grade� : F1/F5/F9/F11/F22/F91 Copper Alloy Forged Fittings : Standard� : ASTM / ASME SB 61 / 62 / 151 / 152. Grade� : UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640 Nickel Alloy Forged Fittings : Standard� : ASTM / ASME SB 564 / 160 / 472 â?¢ Nickel 200 â?? UNS N02200 � � â?¢ Nickel 201 â?? UNS N02201 � � â?¢ Monel 400 â?? UNS N04400 â?¢ Monel K500 â?? UNS N05500 � � â?¢ Inconel K600 â?? UNS N06600 � � â?¢ Inconel 601 â?? UNS N06601 â?¢ Inconel 625 â?? UNS N06625 � � â?¢ Inconel 800 â?? UNS N08800 � � â?¢ Inconel 800H â?? UNS N08810 â?¢ Inconel 825 â?? UNS N08825 � � â?¢ Hastelloy C276 â?? UNS N10276 � � â?¢ Alloy 20 â?? UNS N08020 Other : â?¢ Hydraulic Fittings � � � � â?¢ Instrumentation Fittings Test Certificate : Manufacturer Test Certificate as per EN 10204 / 3.1 Types Of Forged Fittings â?¢ SS 310 / 310S Forged Fittings â?¢ Duplex Steel UNS S31803 Forged Fittings â?¢ Stainless Steel 304 / 304L Forged Fittings â?¢ Duplex Steel Forged Fittings â?¢ Stainless Steel 316 / 316L Forged Fittings â?¢ Duplex Steel UNS S32205 Forged Fittings â?¢ Stailess Steel 321 / 321H Forged Fittings â?¢ Super Duplex UNS S32750 Forged Fittings â?¢ Monel 400 Forged Fittings â?¢ Hastelloy C276 Forged Fittings â?¢ SS Forged Fittings â?¢ Steel Forged Fittings â?¢ Inconel 625 Forged Fittings â?¢ Alloy 20 Forged Fittings â?¢ Cu-Ni 70/30 (C71500) Forged Fitti
Diesel gasoil en 590 low sulphur 10ppm gasoil euro 4(50ppm) mazut m100 gost 10585 75 aviation kerosene colonial grade 54 jet fuel jet fuel a1 91/91 diesel d6 virgin low pour fuel oil export blend crude oil lpg(liquefied petroleum gas) lng(liquefied natural gas, lift able quantity) fuel oil cst 180 urea 46% prilled & granular sulfur granular nitrogen phosphorus and potassium fertilizer (npk) petroleum coke automotive gas oil (ago) diesel d2 50ppm & 500ppm bitumen grade 60/70 and 80/100 gasoline 89, 92, octanes base oil other products are available.Trading
Original R-50 R-65 Tee rails weighing 50 pounds per yard or more, 6 meters long and more Nominal Specification for R50 â?? 51.67 kg/m GOST 7173-75 Nominal Specification for R65 â?? 64.72 kg/m GOST 8165-75 Nominal Chemical Composition Carbon (C) 0.20% to 0.60% Manganese (Mn) 0.60% to 0.90% Silicon (Si) 0.15% to 0.35% Sulphur (S) 0.05% to Maximum Phosphorous (P) 0.05% to Maximum Arsenic (Ar) 0.15% to Maximum
High purity copper ingots (HF, C5N grade), oxygen-free copper Chemical purity: 99.999% wt. calculated as the difference between 100% and the total content of metal implications (Metals Base) in accordance with Alfa Aesar Sigma-Aldrich or Russian GOST 859-2014 â??Copper. Ingots. Quantity: from 10,000 to 50,000 kg per month or more. Assortment and packaging: - Flat ingots (strips 15 - 40 mm thick; 300, 600 mm wide; up to 1500 mm long, packaged in 1 ton; - Ingots may be cut into templates of 3-5 kg, in plastic bags, packed in plastic or metal boxes of 40-50 kg; - Bars - a square of 50 mm.
Petroleum products (aviation fuel, d2 diesel, en590 10ppm, diesel 50ppm, mazut m100, d6, lpg, lng, espo, light cycle oil, bitumen 40/50, 60/70, 80/100, 85/100) rice, sugar, icumsa 45.
En590c (10 ppm), jet fuel a1, jp54 jet fuel, d6 virgin fuel oil, diesel gas oil (d2), light cycle oil (lco), aluminum a7 ingot, copper cathode, used rail road rails, urea 46, liquefied natural gas (lng), liquefied petroleum gas (lpg), espo crude oil, mazut fuel oil (m100), bitumen (grade 40/50, 60/70, 80/100), automotive gas oil (ago), pet coke (standard), gasoline 93, sugar, and coal.