Treadle pump.
Material construction of motor Part nameMaterial ShaftSs 431 / ss 410 Bearing bushLeaded tin bronze Thrust bearingS.S. / carbon / teflon Lower/upper housingCast iron Stator shellStainless steel (heavy duty) Material construction of pump Part nameMaterial Impeller/diffuserNoryl gfn 2-701 Bearing bushLeaded tin bronze Pump shaftS.S 202 Suction casing / nrvCast iron Strainer / cable guardStainless steel Operating limits Power range0.5 h.P. To 1.5. H.P. (150 /240 v, 50 hz. Single phase) 0.75 h.P. To 5.0 h.P. (350 /415 v, 50 hz. Ac three phase) Speed2850 rpm Max. Discharge400 lpm Min. Discharge15 lpm Max. Head900 ft. Per stage head20 ft. Special features : Lower power consumption Long durability due to corrosive ss body Special design to withstand wide voltage fluctuations. Excellent performance even at low voltage Special sand guard used to prevent ingress of solids or foreign particles.
Material Construction of Motor Part NameMaterial ShaftSS 431 / SS 410 Bearing BushLeaded Tin Bronze Thrust BearingS.S. / Carbon Lower/Upper HousingCast Iron Stator ShellStainless Steel (Heavy Duty) Material Construction of Pump Part NameMaterial Impeller/DiffuserSS 410 / Cast Iron Bearing BushLeaded Tin Bronze Pump ShaftS.S 202 Suction Casing / NRVCast Iron Strainer / Cable GuardStainless Steel Stage CasingCast Iron Operating Limits Power Range5.0 H.P. (180 /240 V, 50 Hz. AC single phase) 5.0 to 10.0 H.P. (350 /415 V, 50 Hz. AC Three phase) Speed2850 RPM Max. Discharge700 LPM Min. Discharge300 LPM Max. Head275 Ft. Per stage Head33 Ft. Special features : Lower Power Consumption Sand Fighter Model Long durability due to complete SS Motor body With stand with wide voltage fluctuation Specially Designed for high discharge Excellent performance even at low voltage
Material construction of motor Part nameMaterial ShaftSs 431 / ss 410 Bearing bushLeaded tin bronze Thrust bearingS.S. / carbon Lower/upper housingCast iron Stator shellStainless steel (heavy duty) Material construction of pump Part nameMaterial Impeller/diffuserSs 410 / cast iron Bearing bushLeaded tin bronze Pump shaftS.S 202 Suction casing / nrvCast iron Strainer / cable guardStainless steel Stage casingCast iron Operating limits Power range5.0 h.P. To 20.0 h.P. (350 /415 v, 50 hz. Ac three phase) Speed2850 rpm Max. Discharge1250 lpm Min. Discharge50 lpm Max. Head1300 ft. Per stage head(1) 50 ft. For k-type model / 45 ft. For q-type model (2) 35 ft. For k-type model / 30 ft. For q-type model Pecial features : Low power consumption Sand/mud proff design Specially designed ss 304 grade bowl for high head & high discharge
Material Construction of Motor Part NameMaterial ShaftSS 431 / SS 410 Bearing BushLeaded Tin Bronze Thrust BearingS.S. / Carbon Lower/Upper HousingCast Iron Stator ShellStainless Steel (Heavy Duty) Material Construction of Pump Part NameMaterial Impeller/DiffuserSS 410 / S.S. 304 Bearing BushLeaded Tin Bronze Pump ShaftS.S 202 Suction Casing / NRVCast Iron / S.S. Strainer / Cable GuardStainless Steel Stage CasingS.S. 304 Operating Limits Power Range5.0 H.P. to 20.0 H.P. (350 /415 V, 50 Hz. AC Three phase) Speed2850 RPM Max. Discharge1380 LPM Min. Discharge55 LPM Max. Head1200 Ft. Per stage Head50 Ft. for K-type model / 45 ft. for Q-type model Special features : Energy Efficient Models Long durability due to non corrosive SS body Sand/mud proff design Specially Designed SS 304 grade bowl for high head & high discharge Excellent performance even at low voltage
5.0cfm Ultimate perssure :0.04pa Wooden crate
3g series three screw pump It applies to deliver clean and non-corrosive medium which has lubricating property at temp blow 150 with the viscosity of 3-760cst. The pump working pressure range from 0.6mpa to 2.5mpa and flow rate range from 0.6m3/h to 123m3/h Feature Medium is delivered in axial direction continuously without agitation and pulsation Small vibration and low noise High pressure and high efficiency Simple structure, easy disassemble and assembly Small volume and light weight Slight wear and long life Materials: Driving and driven screw:16mncrs5, 40cr, 46, 38crmoal Pump body: ht200, qt450-10, zcusn10p1, zg270-500 Export standard case/plywood case
Lqb asphalt heat pump (gear oil pump) applicable to transport non-corrosive, not containing solid particles, at normal temperature have coagulability medium, especially suitable for cold area outdoor installation and process medium need insulation occasions, medium temperature can reach 250 c, the viscosity for 5-1500 cst. Asphalt pump use: Used to transport heavy oil, asphalt, glues, resin, detergent, etc Structure: This lqb asphalt heat pump pump body with hollow sandwich, and is equipped with import and export flange, can be used for heat conduction oil, steam, hot water and other media to transport liquid and pump heat insulation and cooling. Export standard carton or plywood case
Designed to be interchangeable with a warman ah 4/3 slurry pump. Fh series slurry pumps are mainly using for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. Structure: The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. Bearing assembly of this kind of slurry pump use cylindrical structure, adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication. The shaft seal of this kind of slurry pump could use the packing seal, expeller seal and mechanical seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as v belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. The pump of this type may be installed in multistage series to meet the delivery for long distance. Application: This kind of slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc. We supply complete, ready-to-use packages including pump, motor and frame desinged to your specifications. These pumps are ideal for the chemical transfer pump in plants for chemicals including lime. Standard export wooden cargo
Bore well submersible pumpset:- FOR 3, 4, 6, 8 & 10 Inch Bore Size.
Bore well submersible pumpset:- For 3, 4, 6, 8 & 10 inch bore size.
Monoblock pump set :- 1 phase & 3 phase 1h.P to 20 h.P.
Performance Curves 7 m3 4,80hm 3 speed.
With short gaps in the both ends of support, XS type pump works stably with less noise and vibration. It can be risen speed operation to meet wider usage. Being inlet and outlet located in the same center line, the pipelines arrangement looks simple and beautiful. The rotor can be operated in reverse direction to avoid damage to the pumps from water hammer. Unique design of high temperature, using middle support, thickening pump casing, seal cooling and oil lubrication bearing make XS type pump suitable for working at 200, especially for heat supply newtwork requirements. XS type pump case body can be vertically or horizontally installation acoording to different working condition, with mechanical seals or packing seals. Wtih industrial designs to the shape of XS type pump, the line of pump is clear and beautiful to in line with modern aesthetics. Cost advantage: 1. Using the advanced hydraulic model, the efficiency of XS pump is 2%~3% higher than the same type pumps. The operating cost minimum. 2. The vacuum height of XS type pump is risen 1-3 meter to reduce land construction investment and to extend the service life. 3. Using inport brand bearing, such as SKF, NSK and using various pump material make XS type pump suitable for any site working condition and minimize the maintenance cost. Maintenance advantage: 1. With container type mechanical seal, the mechanical seal of pump is very easy and simple to replace. 2. With elastic ripess assembling, the rotor parts is easy and rapid to assembly and disassembly. 3. It is unnecessary to make adjustment to any gap when assembling.
Features: 1. New-pattern, air-cooled, 4-stroke gasoline engine powered 2. High strength die-cast aluminium alloy pump body 3. Compact structure, light weight for easy transportation 4. Security operation and easy maintenance. We can maufacture the goods by your special demand The color of goods looks can be choosed by the customers.
Product Overview: DP Pump is a self Cbalancing multilevel boiler feed pump with single-suction, multievel and sectional structure. This series of pumps are suitbalbe for medium and low pressure boiler water feeding, and high-pressure boiler water feeding for thermal power plant, as well as high-lift water supply and drainage of factories and cities. They are used in transferring water or other liquid with similar physical and chemical properties to water. Temperature of media being transferred can vary from -20~160 Efficient energy-saving: Using advanced hydraulic model, independent R&D energy efficient products. Good centering of impeller and guid vane channel and efficiency will not significantly drop as balancing disc wears and rotor components move forward. No leakage of balancing water reduces loss of volume and improves pump efficincy and pump efficiency is on average 2-5% higher than normal DG pump. New structure: With symmetrically arranged impeller rotor components, axial forces generated by all levels of symmetrical impellers forces offset each other and automatic balancing of huge axial thrust within pump cavity can be realized without the balcancing disc structure. New technology: Unique throttling and pressure reduction devices, odd-lecel balancing device. High reliability: By canceling easy-failing balancing disc, pump reliability is greatly improved, maintenance frequency and maintenance cost are reduced. Low maintenance cost and long life time By adopting precision casting and unique throttling and pressure reducing devices for auxiliary support, pump vibration and noise are greatly reduced and service life is prolonged.
We are manufacture and supplier of domestic pump 0.5 hp and 1 hp self priming and mono black models in coimbatore, Tamil Nadu India . Cor gate box.
Road Project Rig:Apply to be using on open and no power site, such as the Plaza, Highway, workshops and other large-scale drilling operations on the ground, not fixed, mobile convenience, continuous work.Maximal Hole to 400mm Vertical Rig: Easy to use, light weight, big horsepower, high-speed, short-time overload of work, applicable to the most moving working condition for every size holes. Hand Rig:Flexible and applicable to the various locations of the drilling operations. Such as decoration, household appliances installation, plumbing etc. Provides many kinds of international, advanced brand slurry pumps, SeriesAH, ZGB, ZJ Our experts will be your reliable consulters to give consultive suggestions and precise selection on performance parameter, construction, materials, etc. It can let the slurry pumps from us have a better service for industries of mining, metallurgy, coal preparation plant, ash-handling at power plant, etc.
Pump and parts.
Benefits: Bearing assembly – a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame. Liners – easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomer. Elastomer seal rings back all liner joints. Casing – Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety. Impeller – front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available. Throatbush – wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal. One-piece frame – a very robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance. Wooden case with plastic inner packing.
