ER-TS-2186DI Features: 1. Single axis tilt monitoring; 2. Full range accuracy 0.005�°, resolution 0.0007 3. Output frequency 5~100HZ (optional). Introduction ER-TS-2186DI is a high-precision single-axis tilt sensor with a resolution of 0.0007�°, an accuracy of 0.005�°, and a temperature drift of 0.0007�°/â??. The output interface has RS232, RS485, RS422, TTL, CAN, MODBUS bus to choose from. The product is equipped with high-precision digital sensor, which can correct the temperature drift of the sensor according to the monitoring temperature change of the built-in temperature sensor to ensure the repeatability of the product in low temperature and high temperature environments. Its corresponding frequency is 100Hz, the performance is reliable and stable, and the scalability is good, that is, it is suitable for various industrial control environments. Features Single axis tilt monitoring Full range accuracy 0.005�°, resolution 0.0007�° Output frequency 5~100HZ (optional) Wide voltage input DC 11~36V(5V can be customized) Wide temperature working -40~+85â?? Measuring range 0~�±5/�±10/�±15/�±30�° (optional) High vibration resistance >20000g Baud rate 2400~115200 (adjustable) IP67 protection Can output RS232/RS485/TTL/MODBUS (optional) Small volume (107*55*27mm) (customizable) Applications High-voltage wire tower pole monitoring Satellite solar antenna positioning Precision machine tool horizontal control Precision laser platform equipment Medical equipment Tripod head leveling Railway locomotive Based on tilt monitoring Angle control of various construction machinery Inspection of bridges and dams
# Product material:carbon steel,stainless steel,aluminum,Glass Fiber Reinforced Plastic #Product surface:Polished,Aluminum Oxidation Spray coated Hot dipped galvanized Galvanize Plain Steel,zinc aluminum magnesium # Product size:1-5/8"x 1" , 1-5/8"x 13/16", 1-5/8"x 1-5/8", 1-5/8"x 2-7/16", 1-5/8"x 3-1/4"(41 x 25 mm, 41 x 21 mm, 41 x 41 mm, 41 x 62 mm, 41 x 82 mm) # Product thickness: 18 GA 17 GA 16 GA 15 GA 14 GA 13 GA 12 GA (1.0 mm,1.2 mm,1.5 mm 1.8 mm 2.0 mm ,2.5 mm) , Others also welcome # Product Length:6' 10' 20' ,1.8 m 2.4 m 2.9 m,3.0 m,5.8 m,6.0 m ,Cut to Length upon request. # Application:Cable management support,Pipe and conduit supports,HVAC Duct Support,Pillar racking system,ceiling grid support bracket,Machine support protection,Solar panel bracket. We can offer # Full line of solid strut channel, slotted strut channel,welded strut channel, hole and patterns are available # Full line of fittings, clamps and strut supports # Wide variety of strut materials and finishes Hot questions Q1: Are you manufacture? A: No,we have partner in Wuxi Langfang city. Q2: How can I request product samples? A: The samples are free but courier charge will be collected. Please send us samples list and courier account number. Q3: How can I request a product catalog? A: The hard copies of catalogs are free but courier charge will be collected.The PDF catalog we can send to you by email or chap App. Q4: What is your payment terms? A: 30% T/T deposit,balance against B/L copy; Irrevocable L/C 100% at sight and irrevocable. Q5: How about the delivery time? A: Accord to your order list and quantity,mostly delivery in 30 days. Q6. Why choose us? 1. We are Songyin Leading supply of Strut Channel and Fittings. 2. Inspected by the Inspection Institution by standard of DIN-ISO-2768 3. 100% QC inspection before Shipment.
ER-TS-12200-Modbus Features: 1. Dual axis monitoring (single axis optional); 2. Full range accuracy 0.001 , resolution 0.0005 ; 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-12200-Modbus High Precision Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: �±30�° Accuracy: 0.001�°, resolution: 0.0005�° Volume (94*74*64mm) (customizable) Ultra low power consumption Powered by built-in rechargeable lithium battery Wide temperature operation -40~+85â?? IP67 protection grade Applications Bridge construction PTZ levelling Ship navigation attitude measurement High railway foundation tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
ER-TS-22800 Feature: 1. Accuracy: 0.005 resolution: 0.0008 2. Measurement range: ± 30 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-22800 protocol is a wireless tilt sensor with ultra-low power consumption, small size and high accuracy, for users without power supply conditions or real-time dynamic measurement of object attitude Angle industry applications. Powered by lithium battery, based on the Internet of Things technology Bluetooth, Zigbee (optional) wireless transmission technology, the use of industrial-grade MCU, triple-proof PCB boards, imported cables, wide-temperature metal shell and other measures to improve the productâ??s industrial level, good long-term stability and zero drift small, Low power sleep mode can be automatically entered, thus getting rid of the dependence on the use environment. Compact product structure, precision design, for temperature and linearity compensation again, Integrated with short circuit, instant high pressure, polarity, surge and other comprehensive protection functions, simple and easy to use, and wireless digital signal transmission mode eliminates the tedious wiring brought by long cable transmission, noise interference; Industrial-grade design has extremely high measurement accuracy and anti-interference ability, wireless sensor nodes can form huge wireless networks, supporting thousands of monitoring points for simultaneous inclination monitoring, supporting the professional computer software, no need for field survey, real-time data measurement and record the state of the measured object; Suitable for the industrial site, old dilapidated houses, ancient buildings, civil engineering, various tower tilt deformation remote real-time monitoring and analysis of the needs of the safety monitoring system. Product property Biaxial monitoring (uniaxial optional) Measurement Range: �± 30�° Accuracy: 0.005�°, resolution: 0.0008�° Volume (94*74*64mm) (customizable) Ultra-low power consumption Built-in rechargeable lithium battery power supply Wide temperature work:-40~+ 85â?? IP67, protection level Product application Billboard monitoring Bridge construction Cloud platform levelling Ship attitude measurement High Speed Rail Roadbed Tunnel Monitoring Satellite solar antenna positioning Medical equipment Various engineering machinery angle control
ER-TS-22800 Feature: 1. Accuracy: 0.005 , resolution: 0.0008 2. Measurement range: ± 30 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-22800 protocol is a wireless tilt sensor with ultra-low power consumption, small size and high accuracy, for users without power supply conditions or real-time dynamic measurement of object attitude Angle industry applications. Powered by lithium battery, based on the Internet of Things technology Bluetooth, Zigbee (optional) wireless transmission technology, the use of industrial-grade MCU, triple-proof PCB boards, imported cables, wide-temperature metal shell and other measures to improve the productâ??s industrial level, good long-term stability and zero drift small, Low power sleep mode can be automatically entered, thus getting rid of the dependence on the use environment. Compact product structure, precision design, for temperature and linearity compensation again, Integrated with short circuit, instant high pressure, polarity, surge and other comprehensive protection functions, simple and easy to use, and wireless digital signal transmission mode eliminates the tedious wiring brought by long cable transmission, noise interference; Industrial-grade design has extremely high measurement accuracy and anti-interference ability, wireless sensor nodes can form huge wireless networks, supporting thousands of monitoring points for simultaneous inclination monitoring, supporting the professional computer software, no need for field survey, real-time data measurement and record the state of the measured object; Suitable for the industrial site, old dilapidated houses, ancient buildings, civil engineering, various tower tilt deformation remote real-time monitoring and analysis of the needs of the safety monitoring system. Product property Biaxial monitoring (uniaxial optional) Measurement Range: ± 30 Accuracy: 0.005 , resolution: 0.0008 Volume (94*74*64mm) (customizable) Ultra-low power consumption Built-in rechargeable lithium battery power supply Wide temperature work:-40~+ 85 IP67, protection level Product application Billboard monitoring Bridge construction Cloud platform levelling Ship attitude measurement High Speed Rail Roadbed Tunnel Monitoring Satellite solar antenna positioning Medical equipment Various engineering machinery angle control
Introduction ER-TS-32600-Modbus High Performance Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: double axis �±90�°, single axis 180�° (360�° optional) Accuracy: 0.01�°, resolution: 0.002�° Volume (94*74*64mm) (customizable) Ultra low power consumption Built in rechargeable lithium battery for power supply Wide temperature operation -40~+85â?? IP67 protection grade Applications Billboard monitoring Bridge construction PTZ levelling Ship navigation attitude measurement High speed railway subgrade tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
ER-TS-32600-Modbus Features: 1. Dual axis monitoring (single axis optional); 2. Full range accuracy 0.01°, resolution 0.002°; 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-32600-Modbus High Performance Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: double axis �±90�°, single axis 180�° (360�° optional) Accuracy: 0.01�°, resolution: 0.002�° Volume (94*74*64mm) (customizable) Ultra low power consumption Built in rechargeable lithium battery for power supply Wide temperature operation -40~+85â?? IP67 protection grade Applications Billboard monitoring Bridge construction PTZ levelling Ship navigation attitude measurement High speed railway subgrade tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
ER-TS-12200-Modbus Features: 1. Dual axis monitoring (single axis optional); 2. Full range accuracy 0.001 resolution 0.0005 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-12200-Modbus High Precision Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: ±30 Accuracy: 0.001 , resolution: 0.0005 Volume (94*74*64mm) (customizable) Ultra low power consumption Powered by built-in rechargeable lithium battery Wide temperature operation -40~+85 IP67 protection grade Applications Bridge construction PTZ levelling Ship navigation attitude measurement High railway foundation tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
Introduction ER-TS-12200-Modbus High Precision Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: �±30�° Accuracy: 0.001�°, resolution: 0.0005�° Volume (94*74*64mm) (customizable) Ultra low power consumption Powered by built-in rechargeable lithium battery Wide temperature operation -40~+85â?? IP67 protection grade Applications Bridge construction PTZ levelling Ship navigation attitude measurement High railway foundation tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
ER-TS-32600-Modbus Features: 1. Dual axis monitoring (single axis optional); 2. Full range accuracy 0.01, resolution 0.002; 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-32600-Modbus High Performance Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: double axis �±90�°, single axis 180�° (360�° optional) Accuracy: 0.01�°, resolution: 0.002�° Volume (94*74*64mm) (customizable) Ultra low power consumption Built in rechargeable lithium battery for power supply Wide temperature operation -40~+85â?? IP67 protection grade Applications Billboard monitoring Bridge construction PTZ levelling Ship navigation attitude measurement High speed railway subgrade tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
ER-TS-12200-Modbus Features: 1. Dual axis monitoring (single axis optional); 2. Full range accuracy 0.001, resolution 0.0005; 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-12200-Modbus High Precision Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: ±30 Accuracy: 0.001 , resolution: 0.0005 Volume (94*74*64mm) (customizable) Ultra low power consumption Powered by built-in rechargeable lithium battery Wide temperature operation -40~+85 IP67 protection grade Applications Bridge construction PTZ leveling Ship navigation attitude measurement High Railway Foundation Tunnel Monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
ER-TS-32600-Modbus Features: 1. Dual axis monitoring (single axis optional); 2. Full range accuracy 0.01 resolution 0.002 3. Volume (94*74*64mm) (customizable). Introduction ER-TS-32600-Modbus High Performance Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs. Features Dual axis monitoring (single axis optional) Range: double axis �±90�°, single axis 180�° (360�° optional) Accuracy: 0.01�°, resolution: 0.002�° Volume (94*74*64mm) (customizable) Ultra low power consumption Built in rechargeable lithium battery for power supply Wide temperature operation -40~+85 IP67 protection grade Applications Billboard monitoring Bridge construction PTZ leveling Ship navigation attitude measurement High speed railway subgrade tunnel monitoring Satellite solar antenna positioning Medical equipment Angle control of various construction machinery
ENGINE: 4.0 L, 6-CYLINDER, PETROL, VVT-I MAX OUTPUT: 228 HP / 5200 RPM (170 KW) MAX TORQUE: 360 NM / 3800 RPM 5 SPEED MANUAL TRANSMISSION FRONT & REAR DIFFERENTIAL LOCK POWER SIDE VIEW MIRRORS, CHROME PLATED FRONT BENCH SEAT (3 PASSENGERS) MANUAL AIRCONDITIONING GLOVE BOX COOLING VENT SAHARA MIGHTY 79 CONVERSIONS DETAILS RKC FAB CUSTOM FRONT BUMPER WITH BULL BAR RKC FAB CUSTOM ROOF RAIL RKC FAB CUSTOM SNORKEL RKC FAB CUSTOM FENDER RAILS RKC FAB CUSTOM SIDE STEPS EVO CORSE RIM 17"0" H&R WHEEL SPACER CUSTOM EXHAUST TAILPIPE 2.5 KING SHOCK ADJUSTABLE TO 3" TO 5" KING STEERING STABILIZER TIRE: MILESTAR 315/17/17 DOBISON 3-INCH COIL FRONT DOBINSON LEAF SPRING DOBINSON FRONT AND REAR SWAY BAR DOBINSON ABS BRACKET SPACER KIT 70 SERIES DOBINSON U BOLT KIT DOBINSON POLYURETHANE BUSH KIT DOBINSON SHACKLE KIT AND SHACKLE PIN DOBINSON BRAKE EXTENSION PROPORTIONING VALVE ADJUSTER DOBINSON SWAY BAR EXTENSION RK ROBUST 12000LBS WINCH BYSON CELLULAR ANTENNA X 2 CUSTOM SEATS CUSTOM CUP HOLDER CUSTOM STEERING WHEEL ALUMINIUM CANOPY ALUMINIUM CANOPY TRAY X 1 3000W KISAE SMART INVERTER KISAE INVERTER CHARGE CONTROL PANEL DC-DC CHARGER WITH MPPT SOLAR 10-35V DC CRUISE LIGHT WIRELESS CONTROLLER 200AMP BATTERY BACK-UP 22OV WALL SOCKET WATER TANK 75LTR WITH AUTOMATED PUMP WATER GAUGE ARB TWIN COMPRESSOR CANOPY ROOF RACK SHOWER TENT ROOT TOP TENT REFRIGERATOR 48LTR DELONGHI DOLCE GUSTO COFFEE MACHINE RKC FAB CUSTOM DRAWER RKC FAB CUSTOM TIRE CARRIER RKC FAB CUSTOM PULL-OUT TABLE RKC FAB CUSTOM FOLDABLE LADDER RKC FAB CUSTOM EXTERNAL STORAGE RKC FAB CUSTOM TOOLS DRAWER RKC FAB CUSTOM ROOF & DOOR MOLLE PANEL SIBERIA DRC 50" STRANDS LIGHTBAR RLB ROCK LIGHTS SIBERIA MULTIPLE OPTIONS TAIL LED
Product Description Property Value SKU ECMCLASSIKAPIDFC App Connectivity No Boiler Configuration Single-Boiler/Dual-Use Number of Boilers 1 Brew Boiler Auto-Fill Yes Brew Boiler Heater Location Internal Brew Boiler Insulation Yes Brew Boiler Material Stainless Steel Brew Boiler Orientation Vertical Brew Boiler Volume (Oz) 33 fl-oz Three-Way Valve Manual Back Flush Capable Yes Brew Group Material Chrome Plated Brass Brew Group Size (mm) 58 mm Brew Group Type E61 Brew Boiler Wattage 1200 Recommended Application Home / Residential NSF Certified No Display Type PID Control Screen Controls and Additional Features Brew Temperature Display,Low-Water Warning,Power Light,Temperature Control Pressure Gauges Brew Circuit, Flow Control Type of Controls Lever, Flow Knob Cup Height (max, inches) 4 in Cup Warmer Material Stainless Steel Cup Warmer Size (L-in x W-in) 10 x 10 Cup Warmer Passively Heated Drain Line Adaptable (Plumbable) No Drip Tray Capacity (oz) 32 fl-oz Drip Tray Cover Material Stainless Steel Drip Tray Material Stainless Steel Removable Drip Tray Yes Portafilter Baskets Included Double, Single Frame Material Steel Housing Color Stainless Steel Housing Material Stainless Steel Recommended Descaler Type Durgol Swiss Espresso Descaler Recommended Water Filter BWT Bestcup M Capacity (Oz) 25.4 fl-oz Depth (Inches) 17.75 in Height (Inches) 15.75 in Weight (Lbs) 45.6 lbs Width (Inches) 9.84 in Bottomless Portafilter Available Yes Filter Diameter (mm) 58 mm Portafilter Handle Material Bakelight Plastic, Plastic Portafilter Material Chrome Plated Brass Number of Portafilters Included 1 Ground, E.S.E., Pod and Capsule Compatibility Ground Coffee Portafilter Type Commercial Style Portafilter Weight (lbs) 1.25 lbs Portafilter Diameter 58 mm Adjustable Brew Pressure Yes Pump Pressure (Max. Bar) 15 Bar Pump Type Vibration Pump Pump Wattage 52 watts Warranty Service Provider Email Sales@utamacoffee.com Warranty Service Provider Utama Coffee Manufacturers Warranty Period 2-Year Parts and Labor Warranty Amps 10 A Watts 1200 Watt Power Cord Length (inches) 48 in Power Cord Storage No Steam Wand Features No-Burn,Swappable Steam Tips Height Off Counter (Inches) 6.5 in Steam Tip Hole Count 2 Steam Wand Material Stainless Steel Steam Wand Movement Type Fully Articulated Steam Wand Commercial Style Steam Wand Usable Length 4 in Water Reservoir Access Location Top Water Reservoir Capacity 101.4 fl-oz Water Reservoir Features BPA-Free,Removable Water Reservoir Material Plastic Water Source Built-In Reservoir
Hexagonal bolt M12xl.5x60 P/N 43023112060 S-Pipe: Outside, Right Hand, Weld, 7500 117063-7500 MAN33.373DFC steering * steering knuckle bearing ND3128 general purpose * waterpump assembly Casing power tong accessories TQ340-35Y connector 22 *650 24.400-03 Brake device accessories ZJ-32J low speed friction wheel AY50178 GLAND, Eexe ARMORED CABLE 83444-06 55909-12-12 VALVED NIPPLE 3/4", QD AEROQUIP 79388 SWITCH,PRESSURE,IBOP Electric control box FKQ6406-6 chain 10A-3*106 Plug:Orifice 10-32 X .055 Mdl:Ps350/500 93018-14 35Ã??70 BOP AccessoriesFZ35-70 gate assembly 4" JK212-40S-8 S01-1278-01N VALVE : LOGIC,NORMALLY OPEN 30176409-4XN BBFS1-300 Flame-proof single phase fan Insert valve 2.2.08.011 Ordinary nozzle JZS 4-9mm 91251-3 SHIM, BEARING RETAINER Drill pipe power tong accessories ZQ203-125 flange SHIM, COMPOUND RETAINER 109586-4 109528 BRAKE CALIPER: TDS-9S DISC BRAKE 50106-14-C SCREW, CAP-SOC HD (UNC) Casing power tong accessories TQ340-35 Quick release valve KPJ-L10 E2B2000 R2000 PR122/P-LSI WHR 3P 30152845 PIN: DT12897 NUT, ROTARY TABLE, ZP 375, HH ZP001.13 Electric control box FKQ6406Shockproof pressure transmitter YPQ-01-Z/40B Pin:Secondary Retention Dia1.0 30172725-1 Azimuth/inclination logging toolGPIT-SH Schlumberger Drill pipe clamp accessories ZQ203-100 High pressure oil ball head 010804-04M Pin Retainer Collapsible Link 30170045 GT350E Chassis*Rear SteelBoard assembly Drill pipe power pliers accessories ZQ203 pipe plug 100 0105-19M PVC pipe d20mm Winch intermediate shaft accessories ZJ45 Hexagon socket screw M12*25 BOLT SHOULDER SOCKET 30179918 VOLVOFM12 chassis*Cab tilt cylinder H15-520220-08-08 TIMKEN bearing 24122EJW33C3 Axial spring retainer GB894-86-160 Hydraulic tank accessories F-1300 Oil filter assembly AH100101061000 90875 WASHER,FLAT,THRUST,1.01X2.0X.125 Touring car hook accessories DG350 inner spring 103.04.13 Bearing 35x72x23 1.10.03.030 16/25YT/GZ-20 120681 gear, bull helical Hydraulic tank accessories F-1300 Right angle connector NPT3 T511-1002 SEAL GASKET BOMCO AH130101-0411 15GZ-30 Seal Kit: Accumulator 2" Bore Piston RK0200K000 VOLVOFM12 chassis*Small cab shock absorber INTERFACE ETHERNET MV3000 MODIFIED E18233 NB800G.05.11 Bonnet Power system accessories THS5500TXJ3 guide belt BK-GB-2 156500007 heater BGY2-220/2 Drill pipe tong accessories ZQ203-100 front cover 02-09M BEARING NU 1044 MA/C4 00A06C007.025 Filter:Suction 7805265 Washer:Lock (20mm) 86872-20-S MAN33.373DFC Engine*Engine Cylinder Head Screws Drilling rig top drive accessoriesDQ70-A circuit breaker NSX160F 1.23.03.561 FILTER, HI PRESS, 6 MIC, 1-1/4, 6092 PSI H12612 NK400E cooling appliance*Variable amplitude control solenoid valve GT550E Universal*BoomFriction plate Benz 2530 engine * valve cover gasket Drill pipe tong accessories ZQ203-125 external connection block 19.750-08 Drill pipe tong accessories ZQ203-100 Gear Z=22 m=12 0102-11M
4.10.02.081 HeXagon bolts Fuse RT18-32/10A P/N:0201-1102-0024-00 Top seal FZ897.21.01.03 Finger H7UB.114P oil filter 5241840501 Fuse Core 10A P/N:02220020005 BRAKE BELT ASSEMBLY-Z03021200001AA OF DRAWWORK Right Roller 33.75" for carriage 124539-500 BG2 Exed, Exia (Intrinsically Safe) or Weatherproo 1390020 CLAMP ASSY,ELEVATOR LINK,2.91"ID,150T YHZ-B5 mounting bracket 4" HAMMER UNION FIG 206 F & F NPT-3205449 438-5386 Fuel separator AC315002-07-Hook Spring HAMMER UNION 1.1/2" FIG 602 6000 PSI 621500 Gasket ring 02-14 ZQ203-322 Lining Bush CR042.5.1-13 4" GATE VALVE SERIES DM 7500 PSI J0251004572140 O-RING S01-1386-01N Automatic switch EATON XTPR6P3BC1 BUTTON HEAD BA3C GREEN PT 690100094 Terminal base module PLC-BSC-230-UC/21-21/SO46 2980429 Shockproof pressure gauge YTN-100 3802000340 0~40MPa(6000psi) SF40-H Safe Area Analogue Fixed Camera Stations in 316L Stainless Steel or 6082 Aluminium GH3101-05.23.00Spraying pipe assembly FLUID END ASSEMBLYGH3101-05.00 Torque sensor-40218041-002:58P Emergency brake valve4900300052 EXplosion-proof electric heater SJB Piston-rod 1P102967 SPM SPM TWS-600S pump Cotter pin 5 X 30.00 GOST 397-79 on the jaw for hydraulic tong dies M/D TOTCO instrument oil W15-4 Connection of pneumatic valve No.1 01.08.09 Pressure Oil Suction Filter Element 810506-00-0200 O-ring 9090136700 for Diverter DIV37-1/2"-500 9330062716 connector ELBOW,O-RING BOSS/37DEG 56519-8-8-S HANDLE 213971201 Dies 2-3/8" 45293A Transmission shaft 50007000961 Single Phase Isolation Transformer BK-100VA P:100VA 50/60Hz Input: 1-4 380V; Output: 12-15,220V planetary gear 29502831 BUTTERFLY VALVE LUG 3" RESILIENT SEATED 22121-5115311 Module 107.36.120.01 Lanshou LS PLUG:OUTLET;250A;QA/QC REQ CERTIFICATE :D87598 Manufact:WENZHOU DEYUAN UNION HAMMER 3" FIG200 WELD TYPE 20310 Diaphragm 9644-1099 Washer-14 5310780500059 Thrust bearing 535QJTC35A Swiveling two position three-way damper 9167800000 Pony rod RGF1000-04.09 SEAL OIL RESISTENT X AIR.O.UNION 6P 3207137 Diaphragms 49852 from pneumatic safety valve 0013402 winch E1500AC Oil sprayer 12VB.46.150F harting connector 19300101541 "EBR Receptacle Interlocked with Circuit Breaker Cat No: EBR15034FD150 150A, 3W, 4P, 600VAC, 50Hz Grounding Style: Style-2 Make Appleton Electric Co., USA." BONNET SEAL VITON J005521342 56037097 TRANSMISSION FILTER Socket connector Harting 09.14.020.3101 EP ratio pilot overflow valve RZMA-A-030/180/PA-GK/7 Bearing NNAL 6/177.8-1Q4/w33XYA2 Bearing NJ238 GB/T283 Clamp holder 1.03.09.029 Tandem Hydraulic Pump SH5V75S2SXLS25 160 X180 X9.4 2.4.55.014 sealing ring HANDLE 10 POSITION SANITARY 10" 22322002 Bypass valve HH-KLT-1080 Retaining ring 2011861 pump PZG-7
Quick-detachable coupling SKC15-020-006 Sensor for 50SQ BEARING,CONNECTING ROD,65.02410-0100 Back cover gasket 29534354 https://www.amlppmfg.com/large-connecting-rod-bearing-f800-02-19.html INDICATOR LIGHT RED 513 R travel motor for ZX470-5G MSF340 VP-F2 ZX450 V-belt GB/T1171-2006 Loadmaster Jaw 3 1/2 89 mm Oil Country NOV 111070 PHM3I Barrier Isolation Jaw, 5.1/2 ZQ203-065 1R-0719 GT Oil Filter Mesh Retaining ring KG80-18 Pin 01.01-39M AF700201-010421 Tee joint R3/8-M22*1.5 CALIPER, BRAKE, PN.M16-1000-010 Ring 530301011600035507 pump F-800 Lever Latch 45572 Mettler-Toledo Junction box AJB-007 C3/C4 cuff 29552373 GAS REFRIGERANT R134A 11.3CU.M REFRIGERANT GAS R134A CAPACITY:11.3CU.M,FOR AIR CONDITIONING DB12 Up to 110 dB(A) for Harsh Industrial & Marine Environments 2v-0036 heater filter Inlet Valve 2815780703074 9330244629 connector O-RING 680 ID X .070 CROSS SECTION 75 DURO VITON G00004742 RDDA LAN Cartridge Valve 2.2.08.024 PRESSURE GAUGE 5000PSI 350BAR 1/4" NPT 9699223 Rear damper spring GNZS594E-05-01 Finger HH8S157WV SEAL KIT,TORQUE BOOST,UNIVERSAL, PN.S08-1031-010 Screen WMONXL050C Swaco Mongoose Front aXle assembly C124A Meritor 3884 Shackle 2 Ton 3/8" air motor 3012.46F.10 Joystick without spring return to the starting position VNSO21EA-SS/SM9240-16K with cable 5m M/D TOTCO ultrasonic liquid level sensor 222573-001 Plunger coupling assembly 200PZJ4065 WASHER LOCK-REGULAR 50905-C Weatherproof Mini Hooter with Signal Lamp HPL Cartridge valve 94520-1NN Aquare head screw 1441471 MI SWACO STEM PLUG 1U6674X0012 256-7902 air secondary Filter element 5E30 ASM Valve 1FG928 BG322004-0223 Adjusting shim O-ring 190 X 3.55G GB/T3452.1-1992 Bearing 37941K HH2000150532 Liner Boards for Singal Hammer Crusher PCF2018 Double air cylinder XG.00 GS2 F24x30 Gear ring in-band 56.310.02/56.310.00 Oil filter WU-160X100 9162700000 100051751 Filter element M/D TOTCO Clamp Pressure Gauge GA114-43 IND,6,T/T,9K KG, 4921 PSI lever 45624 Bearing LM739749/LM739710 P100167/P100168 Equipment SPM TWS-600S pump gear box Pattern 55 and 60 trapezoid Air filter 1421340 BC136201-0900 Belt pulley assy YHIP-800C digital wall-mounted telephone station 6I-2506 ICE secondary air filter Ring 535 X8.6 Rushi GASKET 127.08.09B YBX3-132S-4 5.5 kW 1440 rpm 380V IP55 EXdIIBT4 Gb IM2001IM2081 Explosion proof water pump 4900500028 for XJ-550 T103-002.16-t0.15 Shim t0.15 V-BELT DOOSAN 65.96801-0195A 328-3655 Oil filter for GT blocking system GA58-Series Single Pointer Pressure Gauge HARTING 9380423101 Encoder isolator BEL OPTICAL ISOLATOR EM-DR1-IC-15-TB-28V/V Sprocket 9645-0043 Internal connection NPT1 1N-16 M1240 4.10.02.042 Hex bolt anti-dragging E302.2.16.1.0 Valve cover RGF1000-05.11
WASHER LOCK HI COLLAR 51132-C BUSHING SLEEVE 1X.50 FIBERGLIDE 118844-16-08 Bearing 180212 (6212-2RS) EX 17-3-E-C24-26SR Receptacle NUT HEX-JAM 80569+30 80569 https://www.amlppmfg.com/290-2288-air-conditioner-air-filter.html 100048353 Security filter element 56052590 16 4.10.09.009 spring washer FITTING GREASE STRAIGHT 53219-1 Roller 71847 Screen WMONXL024C Swaco Mongoose LT Lugged Butterfly Valve DN250/PN1.0 API standard D7L1X3-10ZB1 Gear shaft 2P103273 TWS-600S pump Encoder incremental BTH90.WT1024NY-HD Antifriction washer 56.320.04 LIGHT, LED, EX-PROOF, 100-277V AC, 36 W, 1200MM LG, COOL WHITE, 3960 LUMINOUS FLUX, 70 CRI, SORDFISH SERIES, P/N: EX-KSF361200H7V7CH-E Lid Z9.HL12R Tool ASK 10.02.000 4P100160 Article: ASK 10.02.000 SPM TWS-600S pump to remove front nut design: tong EXp Proof Plug 60A JL33K4ZY11 ZJ-50/315 DB17 Bonnet seal GH3161-28.12 G Heat eXchanger hose assembly Z07190000001AA to X J-550 Bushing 29546229 Ball bearing 30314 BC136201-0200-Spray pump motor Turbo charger kit CUMMINS4025043 Air Shift Valve P55557-3 to J-750 GH3101-02.05.00Outside retainer Bearing 6028 140X210X33 6028 display MT6071iE 1WV.; NSX: Weinview 146-5432 Auto lubrication filter for undercarriage Piston assembly K-1034 1540142 Varco Sealing ring 150X180X15 B15018015 GB9877.1-88 Rotor ZP-206 SEAL PADGH3101-04.15 Mud pipe SL001.05.06 SB56-18.1.11 DEFLECTOR W99131101 SAND PUMP SB6X8FJ HARD LINE TUBE 30114085-500 XF40-IP Explosion Protected HD-IP Fixed Camera Station NE 150 Bucket Bolt & Nut with Spring & Plain Washer M16 X 50mmL Strength-8.8 Counter Sink Socket Head The connection is fast. Valve extension 01.08.07 Set Packing 60BH2 PACKING RETAINR AISI C-1018 ITEM 21 J015330 Seal ring 190 X 3,55 GB3452.1 KERUI Plug 3 1/2â??0101-26M Gear pump HGI-40-01R-PPC BAND BRAKE 19.620.00 Electric motor YB180M-4 PTB-H2/P1-25-1500 Pressure measuring device hose assembly 32I-2000C Discharge bend NB800G.05.08 Hong Hua HYDAC Controller EDS1791-N-250-000 GQ001005CD-Signal line GH3101-04.05Seal gasket Sullair Air Dryer set inlet & outlet dia 2-3" 400V 3P 50Hz Air Presuure 90-230 psig RC-850-400-3-50-A O-RING 568-224 NIT 90DR C6728445 Electrical Actuator for Fan Aeration BLF-04No7.7DType OA-10 Singal Current 4-20mA 380V Cooler Service Kit 8000hr PJ08108-AC-0026 Pin for hydraulic key ZQ 203/100 ZQ203-032 56052657 Air filter cartridge Wear-resistant gasket AH1301010513 AC contactor 3301030290 BAFFLEGH3101-05.14 HAMMERSEAL UNION COMPLETE ASSY 3" PS300A Pressure relief valve JYS-21, 9161200000 O-ring 60�?3.55, PFF52-70-003 for Choke and kill Manifold Assy with valves harting 2076108300;Ethernet switch ESC TP08 1.02.09.015 Shield Outdoor air conditioner fan motor Marvair 40098 Explosion-proof heater BJR-2KW/380V-400L GH3101-02.04Insider retainer 540266 TURNBUCKLE,JAW&JAW,1"X18"
Locking disk GH3161-05.07 Honghua Clutch set LT500/250T Guide spring GH 3161-05.41.00G AF700102-0416-II Connection discH 2.4.55.012 O-ring https://www.amlppmfg.com/one-way-gas-vent-valve-qy094-00.html Air-controlled change valve 4WP6D60/N Cylinder mounting yoke 119732 5021850 TORQUE TRACK MIDDLE DUAL PIN 4"X12"X222" KIT REPAIR GRIPPER CYL BUW M23-1004-010 Air valve 3A220-06 pressure: 0.15-0.8MPa Triplex pump 3GB.00(C) 0Bâ??21.80 QC010017 Piston pins Pin AH0000060107 BOMCO pump Accelerator pedal W.Gessmann PP7-1-ZP S1606845 Pump connector adapter 109579 Drive Shaft Bearing Kit PJ08108-AC-0027 Pre-filter AmAir 300-2" 24X20 bypass valve YF-B20H3-S for YZB-120II X ZQ203 ZQ162 57828770 Filter STATOR WITH RIM 27�°650 34388 Led Lamp  Tube  (Driver  Inbuilt)  Suit  For  BAY51  Led  2x28xj PACKING WASHPIPE 3" 123292-2 Left impeller of the air conditioner Marvair 30012 Stud PERKIN1821642C3 6"HAMMER UNION FIG 206 2000PSI CWP 260610 9Y-7663 ICE Secondary Air Filter adapter body 2.4.34.003 Shaft pinion ZQ203-126 YHB30 explosion-proof electric head WASHER LOCK-REGULAR 50910-C Pyramid screen API 100 PMD500DX-A100 https://www.amlppmfg.com/exhaust-manifold-perkin1821977c2.html Brake head B17.66.1.4 Positioning plate GH3161-05.07 Main bearing bolt RGF1000-02.18/18A Elbow 90 GB/ZQ4419-86 Chain 24A 2X126 to XJ-450 Seat Valve 1561450 Working impeller Derrick G0006024 8X6X14MM Left Roller 41" for carriage 124538-503 GH3101-08.16.00Support Gear shaft Z9.HL49R ATLAS COPCO-ZT160 LUB OIL FILTER PJ08108-AC-0002 1614874700 GH3101-28.09Safety guard SH2B-05A 3.01.04.01.002 relay seat 3.01.04.01.002 GH3101-05.09Seal ring for valve cover SCREW CAP-HEX HD DRILLED 50008-10-C5D oil seal AN1301010404 CROSSHEAD ASSEMBLYGH3101-04.00 Bladder accumulator NXQ-L25 4807100010 Harting connector9330009991 Air-operated pressure transducer YPQ250B O25MPa 3500PSI) Initial oil filter NPT1 1/2" CLYW-160 30 81723059 FILTER AIR FILTER CARTRIDGE Bearing NU1028 140X210X33 NU1028.M Lubricant IsofleX Topas NB52 GCE0007249P0100 ABB V-belt 25J5-4570/3NB-800F Intermediate relay DRM270024LT 51403014005 231-0167 heater air filter Crosshead lower guide RGF1000-04.12 ESP Controller GGAJ02 Automatic Control GEARED MOTOR SEW EURODRIVE TYPE RF77DRE90M4 WITH MOTOR: 3 PHASE:1.1KW: 415V: 1400rpm ZPEC ZM107.03.53.00 PISTON SWAB 6" COMPLETE Seal 811-7600 DRAGON PRODUCTS QWS-2500 pump carbon Labyrinth AH0000060102 BOMCO pump "Limit Switch for use in hazardous locations Cat No: SA111 [1E-S5-K2], Maximum Pressure 1200PSI, 15A, 250VAC, Dwyer Instruments Inc., USA." YHZ-B1 mounting bracket Fuse Core 6A P/N:02220020004 NETWORK CURRENT WB1850B35 Cylinder seal kit H102-42 Switch of Button 810610-00-0502 for Air system of ZJ-20
Product overview: With the rapid development of China's economy, it has been the trend to change the sizing process of traditional box board paper and corrugated board from the combination method of traditional internal sizing and surface sizing into complete surface sizing. Our company has developed new AKD modified surface sizing agent SA2600 through concentrated development for many years. The product is aggregated by various cation materials through special process and added the cross-linking resin synergist. The product can greatly boost the sizing effect, reduce the AKD hydrolysis and improve paper moisture regaining. The product not only can provide excellent high water-resistance performance, but also can boost the surface strength of paper. The product is used in the box board paper and high-strength corrugated paper produced from waste carton. Technical specifications Appearance: Milky white liquid Solids content: 25 �±1% pH value: 2-4 Viscosity: â?¤ 50 mPa.s (25 oC) Ionic type: Cation Solubility: Soluble in water. Performance characteristics 1. It owns excellent water resistance performance and thermal water resistance performance. 2. It can shorten the curing time, and isn't easy to regain moisture. 3. The consumption of internal sizing agent is reduced to decrease production cost. 4. It can significantly improve the interface strength of paper. 5. Compared with the Cation styrene acrylic surface sizing agent, the product reduces its dependence on aluminum sulfate. The less or no aluminum sulfate can be used to improve the paper folding resistance. 6. The product is good in mechanical stability, and few bubbles are generated in the operation process. 7. The product can be used separately or matches with styrene acrylic surface sizing agent. Usage tips Consumption: In case of separate use, 2-6 kg/ton paper is used. In case of matching with styrene acrylic surface sizing agent, the 1-3 kg/ton paper is used. The specific consumption needs to be adjusted according to the water absorption indicator requirements. During use, the pasted starch glue solution is cooled to below 65�°C, and the stock solution of the product is added to the starch glue solution tank, and is mixed evenly before sizing; Or the metering pump is used to add starch glue solution to pipeline for continuous adding. Starch glue solution can be added aluminum sulfate or not according to the actual conditions. The PH value of glue solution in glue solution tank is controlled at 3.5-4.5 upon the use of aluminum sulfate. In case of matching with styrene acrylic surface sizing agent, the aluminum sulfate of glue solution in sizing tank is controlled at 3.5-4. Packing and storage It is packaged in 200kg and 1000kg plastic bucket and is stored in cool place (5-30C) to avoid freezing and solarization. Storage life: 3 months
