Rail Profile Gauge Rail Profile Gauge is is mainly used to measure the vertical wear and lateral wear of the rail.The reasonable design makes it light,convenient operation and intuitive reading Features 1. Digital type with direct readings: LCD display screen, clear and readable; No calculations required,gives direct reading ; When reading, hold down the HOLD button to fix the measurement value and facilitate reading. 2. High measuring accuracy : The measurement accuracy is 0.01m 3. Easy to use, measure the vertical and lateral rail wear at the same time, Position the rail wear gauge on the outer side of the rail . Push the vertical and lateral rail wear gauge so that the measuring probe is in contact with the upper surface and inner side of the rail respectively.Then the vertical and lateral wear of the rail can be read. 4. Metric /imperial unit 5. Support customize: We could customize all kinds wear gauge according to different rail profiles and different measure points. 6.Fast calibrate: One-key zero clearing function, can be quickly calibrated before each use to reach the factory measurement accuracy. 7. Magnetic fixed part: Strong magnetic fixed part to attach to the rail. 8. Rail fillet as measuring base to ensure measure data more accuracy Rail fillet is more clear than rail bottom,no dust. It could ensure the measure result reliability. 9. Portable Handle : This product is designed with a handle that is easy to hold, which greatly improves the portability of the product. It can avoid touching the ruler body directly, cause the ruler body to be stained and corroded, improve the product service life.
Rail Profile Gauge Rail Profile Gauge is is mainly used to measure the vertical wear and lateral wear of the rail.The reasonable design makes it light,convenient operation and intuitive reading Features 1. Digital type with direct readings: LCD display screen, clear and readable; No calculations required,gives direct reading ; When reading, hold down the HOLD button to fix the measurement value and facilitate reading. 2. High measuring accuracy : The measurement accuracy is 0.01m 3. Easy to use, measure the vertical and lateral rail wear at the same time, Position the rail wear gauge on the outer side of the rail . Push the vertical and lateral rail wear gauge so that the measuring probe is in contact with the upper surface and inner side of the rail respectively.Then the vertical and lateral wear of the rail can be read. 4. Metric /imperial unit 5. Support customize: We could customize all kinds wear gauge according to different rail profiles and different measure points. 6.Fast calibrate: One-key zero clearing function, can be quickly calibrated before each use to reach the factory measurement accuracy. 7. Magnetic fixed part: Strong magnetic fixed part to attach to the rail. 8. Rail fillet as measuring base to ensure measure data more accuracy Rail fillet is more clear than rail bottom,no dust. It could ensure the measure result reliability. 9. Portable Handle : This product is designed with a handle that is easy to hold, which greatly improves the portability of the product. It can avoid touching the ruler body directly, cause the ruler body to be stained and corroded, improve the product service life.
Portable Rolling Track Gauge Portable Rolling Track Gauge is mainly used for railway track gauge and super-elevation(cant), check rail gauge and back to back distance measurement. It can be used for track inspection and fine adjustment of rail gauge.This product has the advantages of fast measuring speed, stable pushing rod, easy to carry, and night-time and tunnel work,legible even in direct sunlight are supported. It is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying. Features The benefits of our rolling gauge : 1. Measure the track gauge, cant without bend over your back. 2. Light weight : around 6.5kg , one person operation. 3. BT connection, data uploading and analysis system. 4. High working efficiency. Save your man power. ( 1 man with 1 rolling gauge = 4 man with 4 normal digital track gauge) Specification Model (1435mm) GJC-JJG0 Track gauge 1410-1470mm Superelevation measuring range -185~+185mm Display mode OLED display and hand-held terminal display Supply Voltage DC3.4V 5.2V (rechargeable battery) Superelevation division value 0.05mm Working temperature -30+55 Insulation performance 1M© Track gauge division value 0.01mm Superelevation division value 0.05mm Track gauge max indication error ±0.25mm Superelevation max indication error ±0.3mm Length 1700mm Net Weight 6.5kg
Rail Profile Gauge Rail Profile Gauge is is mainly used to measure the vertical wear and lateral wear of the rail.The reasonable design makes it light,convenient operation and intuitive reading Features 1. Digital type with direct readings: LCD display screen, clear and readable; No calculations required,gives direct reading ; When reading, hold down the HOLD button to fix the measurement value and facilitate reading. 2. High measuring accuracy : The measurement accuracy is 0.01m 3. Easy to use, measure the vertical and lateral rail wear at the same time, Position the rail wear gauge on the outer side of the rail . Push the vertical and lateral rail wear gauge so that the measuring probe is in contact with the upper surface and inner side of the rail respectively.Then the vertical and lateral wear of the rail can be read. 4. Metric /imperial unit 5. Support customize: We could customize all kinds wear gauge according to different rail profiles and different measure points. 6.Fast calibrate: One-key zero clearing function, can be quickly calibrated before each use to reach the factory measurement accuracy. 7. Magnetic fixed part: Strong magnetic fixed part to attach to the rail. 8. Rail fillet as measuring base to ensure measure data more accuracy Rail fillet is more clear than rail bottom,no dust. It could ensure the measure result reliability. 9. Portable Handle : This product is designed with a handle that is easy to hold, which greatly improves the portability of the product. It can avoid touching the ruler body directly, cause the ruler body to be stained and corroded, improve the product service life.
Bright white Huanyan encounter plain white beauty muscle 1 Improve dullness Can penetrate the bottom layer, can inhibit black Reduce dullness and fade melanin 2 White and tender Soft skin, balanced water and oil, delicate skin pores, astringent pores, care for the skin 3 Fade black and yellow Fade the dark, reduce the yellow gas to improve the skin spot aging state Brightening from the outside to the inside, so that whitening does not stop at the surface Prevent pigment generation from the root, and fade color trace, uniform skin color to improve yellow gas, crack down stubborn pigment, prevent future pigment Surface metabolism Moisten the surface spots and inhibit the transfer of dark pigment Intermediate black block Reduce melanin production, strengthen the barrier, and even the skin tone Myogenic black suppression It penetrates deep into the skin and moistens the base of the muscle Inhibit pigment at source Multi-dimensional cycle whitening no longer yellow and black skin Clear white. Deep black suppression. Hard control color Whitening essence surpasses the three conventional whitening mechanisms, clears endothelin stimulation and blocks pigment production; Hit the root, the source of black suppression, natural mild. Full of water luster Precise layers fade blemish Multi-dimensional whitening 3 unique "whitening" energy essence "Multi-effect with high Energy Penetration" Star1 3-o-ethylascorbic acid Anti-sugar and anti-oxygen Inhibiting tyrosinase activity Improve dullness and yellowing Fade black and whiten Star2 Nicotinamide. Reduces facial blemishes Multi-dimensional Wake Up brightening Factor Shape a transparent base Star3 glutathione. Inhibiting pigment Scavenging free radicals Block melanin production Fast * resolution of stubborn pigments Whitening is a protracted war, insist on the use of the effect can be seen
IPS-12 The IPS-12 is a versatile and programmable single-channel pump designed to meet a wide range of fluid handling needs. With its robust capabilities and precision performance, it stands as a reliable solution for various applications in research, pharmaceuticals, and industrial processes. Key Features: Wide Flow Rate Range: The IPS-12 offers a broad flow rate range, from 17.89 picolitres per minute to 121.51 millilitres per minute. Whether handling small volumes with a Hamilton 0.5 �¼l syringe or larger volumes with a 140 ml Monojet Syringe, this pump delivers consistent and accurate flow rates across a diverse range of syringe sizes and materials (glass, plastic, steel). Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by microcontroller software, the IPS-12 provides a user-friendly interface. This interface facilitates easy programming and monitoring of pumping parameters, enhancing efficiency and convenience in operation. Precise Pumping: Featuring a stepper motor and microcontroller with Microstep Drive, the IPS-12 ensures high precision in fluid delivery. With a step resolution of 357 nm/�¼step and adjustable flow rates even during the process, users can achieve precise control over fluid handling tasks, meeting the most demanding requirements with confidence. Versatile Connectivity: The IPS-12 offers flexible connectivity options, including optional Wi-Fi capability. This allows for remote monitoring and control, expanding the pumps usability and accessibility in diverse settings. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: Yes Recipe Save-Recall: Yes Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 170 mm, Height (H): 137 mm Weight: 2.1 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
Rail Profile Gauge Rail Profile Gauge is is mainly used to measure the vertical wear and lateral wear of the rail.The reasonable design makes it light,convenient operation and intuitive reading Features 1. Digital type with direct readings: LCD display screen, clear and readable; No calculations required,gives direct reading ; When reading, hold down the HOLD button to fix the measurement value and facilitate reading. 2. High measuring accuracy : The measurement accuracy is 0.01m 3. Easy to use, measure the vertical and lateral rail wear at the same time, Position the rail wear gauge on the outer side of the rail . Push the vertical and lateral rail wear gauge so that the measuring probe is in contact with the upper surface and inner side of the rail respectively.Then the vertical and lateral wear of the rail can be read. 4. Metric /imperial unit 5. Support customize: We could customize all kinds wear gauge according to different rail profiles and different measure points. 6.Fast calibrate: One-key zero clearing function, can be quickly calibrated before each use to reach the factory measurement accuracy. 7. Magnetic fixed part: Strong magnetic fixed part to attach to the rail. 8. Rail fillet as measuring base to ensure measure data more accuracy Rail fillet is more clear than rail bottom,no dust. It could ensure the measure result reliability. 9. Portable Handle : This product is designed with a handle that is easy to hold, which greatly improves the portability of the product. It can avoid touching the ruler body directly, cause the ruler body to be stained and corroded, improve the product service life.
Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuit fabrication base material is FR4/Teflon/Ceramic, pcb fabrication used in high-power power supply and motor circuits products. HUIHE CIRCUITS is one of the heavy copper PCB manufacturers, we have passed ISO9001/ISO13485/IATF16949/UL/RoHS/REACH certification.If you want to know more about thick copper pcb, heavy copper pcb, please contact HUIHE Circuits heavy copper pcb board manufacturer. Heavy Copper PCB List 2 Layer ENIG Heavy Copper PCB circuit manufacturer 4 Layer ENIG Heavy Copper PCB 6 Layer ENIG Heavy Copper PCB supplier 6 Layer ENIG Heavy Copper PCB manufacturing 6 Layer ENIG Heavy Copper PCB Fabrication Service 6 Layer ENIG Heavy Copper PCB 8 Layer ENIG Heavy Copper PCB 8 Layer ENIG Impedance Control Heavy Copper PCB 2 Layer ENIG Heavy Copper PCB The Heavy Copper PCB Plating Process Must Achieve The Following Aspects: 1. HUIHE Circuits heavy copper pcb manufacturer adds a certain value according to the area value calculated by the computer and the empirical constant accumulated in the actual production to ensure the integrity of the plating layer in the hole. 2. When the heavy copper PCB is electroplated for 5 minutes, take out the substrate and observe whether the copper layer on the surface and the inner wall of the hole is intact. It is better that all the holes have a metallic luster. 3. A certain distance must be maintained between the substrate and the substrate. 4. When the heavy copper PCB reaches the required electroplating time, a certain amount of current must be maintained during the removal of the substrate to ensure that the surface of the substrate and the hole will not be blackened or darkened. 5. HUIHE Circuits heavy copper pcb manufacturer according to the mechanical processing floppy disk for trial processing, the first part pre-inspection is carried out, and all the workpieces are processed after meeting the technological requirements.
Portable Rolling Track Gauge Portable Rolling Track Gauge is mainly used for railway track gauge and super-elevation(cant), check rail gauge and back to back distance measurement. It can be used for track inspection and fine adjustment of rail gauge.This product has the advantages of fast measuring speed, stable pushing rod, easy to carry, and night-time and tunnel work,legible even in direct sunlight are supported. It is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying. Features The benefits of our rolling gauge : 1. Measure the track gauge, cant without bend over your back. 2. Light weight : around 6.5kg , one person operation. 3. BT connection, data uploading and analysis system. 4. High working efficiency. Save your man power. ( 1 man with 1 rolling gauge = 4 man with 4 normal digital track gauge) Specification Model (1435mm) GJC-JJG0 Track gauge 1410-1470mm Superelevation measuring range -185~+185mm Display mode OLED display and hand-held terminal display Supply Voltage DC3.4V 5.2V (rechargeable battery) Superelevation division value 0.05mm Working temperature -30 +55 Insulation performance 1M© Track gauge division value 0.01mm Superelevation division value 0.05mm Track gauge max indication error ±0.25mm Superelevation max indication error ±0.3mm Length 1700mm Net Weight 6.5kg
Digital Rail Head Wear Gauge is is mainly used to measure the vertical wear and lateral wear of the rail. The reasonable design makes it light, convenient operation and intuitive reading. FEATURE 1. Digital type with direct readings: LCD display screen, clear and readable; No calculations required, gives direct reading ; When reading, hold down the HOLD button to fix the measurement value and facilitate reading. 2. High measuring accuracy : The measurement accuracy is 0.01m 3. Easy to use, measure the vertical and lateral rail wear at the same time, Position the rail wear gauge on the outer side of the rail . Push the vertical and lateral rail wear gauge so that the measuring probe is in contact with the upper surface and inner side of the rail respectively. Then the vertical and lateral wear of the rail can be read. 4. Metric /imperial unit 5. Support customize: We could customize all kinds wear gauge according to different rail profiles and different measure points. 6.Fast calibrate: One-key zero clearing function, can be quickly calibrated before each use to reach the factory measurement accuracy. 7. Magnetic fixed part: Strong magnetic fixed part to attach to the rail. 8. Rail fillet as measuring base to ensure measure data more accuracy Rail fillet is more clear than rail bottom, no dust. It could ensure the measure result reliability. 9. Portable Handle : This product is designed with a handle that is easy to hold, which greatly improves the portability of the product. It can avoid touching the ruler body directly, cause the ruler body to be stained and corroded, improve the product service life. Model LJ-GM-A Center vertical wear measure range0-15mm Lateral wear measure range0-25mm Score value0.1mm Indication error ± 0. 15mm Supply CustomizeUIC60/60E1, UIC54 /54E1, 115RE 68TR ect all profiles Block customize block for gauge
Iron Oxide Pigment For Plastic Cement Characteristics: Bright colour, strong colouring power, high purity, resistant to strong sunlight, resistant to atmospheric influences, resistant to dirty gases and various climate changes. Good alkali resistance, poor acid resistance. Rubber products coating adhesion is quite large, in sunlight, air, acid and alkali in the heat of sulphuric acid that is reactive, in the case of sulphur or hydrogen sulphide does not change. Stability requirements for moulding and processing are not strict on the processing temperature requirements. Used in brake pads, brake panels and other asbestos plastic products can improve the coefficient of friction and reduce friction loss. Economical to use. Usage The use of iron oxide pigment in rubber: Generally, the raw rubber is cleaned and refined, and then mechanically processed to get the necessary plasticity, and then added with vulcanising agent and fillers such as iron oxide pigment, zinc oxide and calcium carbonate for blending to get the raw rubber. Then it is processed and moulded into various rubber parts. Applications In the application of rubber and plastics, iron oxide red, which does not contain heavy metal ions such as copper and manganese, can be used in aviation tyres to prevent the aging of rubber. Iron oxide pigment has strong colouring power and pure colour, it is used as colouring agent and filler in PVC plastic flooring and PVC colouring film, and it can be used in thermosetting plastics such as Bakelite powder, Bakelite powder and polyolefin. In thermoplastic plastics: the use of iron oxide pigment in masterbatch or slurry preparation will be more popular in the industry.
PRODUCT DESCRIPTION Portable Rolling Track Gauge is mainly used for railway track gauge and super-elevation (cant) . It can be used for track inspection and fine adjustment of rail gauge. This product has the advantages of fast measuring speed, stable pushing rod, easy to carry, and night-time and tunnel work, legible even in direct sunlight are supported. It is an ideal measuring tool for track fine-tuning, track construction, inspection and track laying. FEATURE 1. Measure the track gauge, cant without bend over your back. 2. Light weight : around 6.5kg , one person operation. 3. Bluetooth connection, data uploading and analysis system. 4. High working efficiency. Save your man power. ( 1 man with 1 rolling gauge = 4 man with 4 normal digital track gauge) SPECIFICATION Model (1435mm) GJC-JJG0 Track gauge 1410-1470mm Superelevation measuring range -185~+185mm Display mode OLED display and hand-held terminal display Supply Voltage DC3.4V5.2V (rechargeable battery) Superelevation division value 0.05mm Working temperature -30+55 Insulation performance 1M© Track gauge division value 0.01mm Superelevation division value 0.05mm Track gauge max indication error ±0.25mm Superelevation max indication error ±0.3mm Length 1700mm Net Weight Net Weight
1. Hard coated low-e glass Hard coated low-e glass also called on-line low-e glass, is using CVD (chemical vapour deposition) technology put the film coated on the surface of the glass when the glass produced from the float line. Because the film layer is stable, the coated glass can be transported and processed same as normal glass. At the same time, hard low-e glass also has the effect of energy saving, the thermal radiation rate of normal glass is 0.84, the thermal reflectivity is 0.16, the thermal radiation rate of hard low-e glass is 0.17, and the thermal reflectivity is 0.83. Main application areas: doors and Windows, home appliances, such as microwave oven, refrigerator, fresh-keeping cabinet etc. Thickness of the hard low-e glass is from 3mm-12mm. Normal size 2134x3300mm,2440x3300mm,5000x3300. 2. Soft coated low-e glass Soft coated low-e glass also called off-line low-e glass, is using MSVD technology to coat silver film and other metallic compounds on fresh float glass. Longyang glass can provide a wide variety of coated glass according to different regions and different needs, such as high light transmittance (over 80%) with low U-value (1.1), lower light transmittance with low U-value. Thickness is from 3mm to 12mm, size is normal size and jumbo size.
Product Introduction Emamectin benzoate 10%+ Indoxacarb 8% 18%WP. Product Feature The active ingredients of this product are abamectin benzoate and indoxacarb. Emamectin benzoate is a biochemical insecticide, which can cause gastric toxicity and kill pests by contact. Indoxacarb is an oxadiazine insecticide. It poisons pests by interfering with their sodium ion channels so that they become instantly paralyzed and eventually die. It mainly causes gastric toxicity, while having the activity of killing insects by contact. After the drug application, the pest would immediately stop eating. Indoxacarb has superior effects in protecting crops and is resistant to rain wash. The combination of these two active ingredients generates a synergistic effect. Experiments show that this mixture has excellent effects in controlling rice leafroller, cabbage diamondback moth and so on. Advantage This compound preparation has strong contact killing effects and can cause gastric toxicity. Although it has no systematic activity, it can easily penetrate into the leaves to kill the pests under the epidermis of plants. This product has good enduring effects in controlling rice leafrollers. It is specially developed for fighting against drug resistant pests and older larvae. As an insecticide with the highest registered content of emamectin benzoate, it has quick effects and can kill pests within 24 hours after application. It has a wide spectrum, with good effects in controlling most Noctuidae pests. It has low toxicity and high insecticidal efficiency and has a long residual effect period, resistant to rain wash and not causing drug resistance easily. This agriculture insecticide has a unique formulation by adopting the advanced suspension technology. It is of a fine particle size and advanced production technology and disperses automatically when getting into water. It can be applied by drones. Emamectin Benzoate 10%+Indoxacarb 8% 18%WP Insecticide Uses and Recommendations 1. Spray the drug evenly on the crop in the peak egg hatching period or the early peak young larva period of rice leafrollers.
Product Description Digital Rail Head Wear Gauge is is mainly used to measure the vertical wear and lateral wear of the rail.The reasonable design makes it light,convenient operation and intuitive reading. FEATURE 1. Digital type with direct readings: LCD display screen, clear and readable; No calculations required,gives direct reading ; When reading, hold down the HOLD button to fix the measurement value and facilitate reading. 2. High measuring accuracy : The measurement accuracy is 0.01m 3. Easy to use, measure the vertical and lateral rail wear at the same time, Position the rail wear gauge on the outer side of the rail . Push the vertical and lateral rail wear gauge so that the measuring probe is in contact with the upper surface and inner side of the rail respectively.Then the vertical and lateral wear of the rail can be read. 4. Metric /imperial unit 5. Support customize: We could customize all kinds wear gauge according to different rail profiles and different measure points. 6.Fast calibrate: One-key zero clearing function, can be quickly calibrated before each use to reach the factory measurement accuracy. 7. Magnetic fixed part: Strong magnetic fixed part to attach to the rail. 8. Rail fillet as measuring base to ensure measure data more accuracy Rail fillet is more clear than rail bottom,no dust. It could ensure the measure result reliability. 9. Portable Handle : This product is designed with a handle that is easy to hold, which greatly improves the portability of the product. It can avoid touching the ruler body directly, cause the ruler body to be stained and corroded, improve the product service life. SPECIFICATION Model LJ-GM-A Center vertical wear measure range 0-15mm Lateral wear measure range 0-25mm Score value 0.1mm Indication error 0. 15mm Supply Customize UIC60/60E1, UIC54 /54E1, 115RE 68TR ect all profiles Block customize block for gauge
Low Voltage MOS Transistor ZKHK's Low Voltage MOS Transistor is a reliable and highly efficient transistor designed to work in applications that require low voltage and low power. It is capable of switching up to 40V and can handle up to 250mA of current. It is available in a variety of packages including SOT-23, SOT-223, and SMD. The low voltage and low power requirements make it ideal for use in low-power and wearable applications. PRODUCTS Different Model Numbers Of Low Voltage MOS Transistor A low voltage mosfet transistor is an integrated circuit device for electrical applications, which offers low power consumption and high performance. It is used in a wide range of electronic applications from consumer electronics to industrial electronics. Common Design Considerations For Low Voltage MOS Transistors Some common design considerations for low voltage MOS transistors include gate-source voltage, drain-source voltage, gate oxide thickness, and drain-source resistance. These factors must be optimized to ensure the transistor can properly switch and handle the current load. Gate-source voltage must be kept low to reduce charge injection and minimize the risk of latch-up. Drain-source voltage should be low enough to reduce leakage current. Gate oxide thickness should be chosen to minimize the channel resistance and improve switching speed. Drain-source resistance should be optimized to reduce power dissipation and minimize the voltage drop across the transistor.
65 Video Wall Display Sawink is a trailblazer in the realm of visual technology and presents the pinnacle of precision with its 65-inch LCD video wall. This sophisticated display marries technological innovation with seamless design, offering a visual experience that transcends boundaries. Tailored to cater to a diverse array of professional applications, Sawink's 65-inch LCD video wall. Precision in Design: Effective Area and Minimal Frame Dimensions: At the heart of Sawink's 65-inch LCD video wall lies a meticulous design that maximizes the effective display area. The space between the frame and the edge of the display case is finely calibrated, measuring between 13 mm to 17 mm. This precision ensures that viewers are immersed in a seamless visual experience, where the frame fades into the background, allowing the content to take center stage. 4K Resolution and Versatile Connectivity: Elevating visual clarity to new heights, the 65-inch LCD video wall from Sawink supports 4K resolution. The display offers versatile connectivity options, supporting video loop-through for a unified 4K experience or individual 4K connections for direct panel interaction. Tailored LCD Video Wall Solutions Across Sizes: Sawink's commitment to versatility extends across its LCD video wall lineup, spanning sizes from 46 inches to 75 inches. Each size is meticulously crafted to cater to diverse spatial requirements, ensuring that every environment, from boardrooms to control centers, can benefit from LCD Video Wall solutions. Advanced Hardware and Software Integration: Sawink's LCD video wall solutions go beyond individual displays, providing a comprehensive approach that integrates advanced hardware and software seamlessly. From hardware manufacturing to the intricacies of software research and development, Sawink ensures that its 65-inch LCD video wall delivers a cohesive and high-performance visual solution.
GH-SW640HS-U2 & GH-SW640HS-Gnet SWIR Camera GHOPTO SWIR usb2 camera is based on an in-house developed InGaAs detector with multiple resolutions. The compact GH-SW640-U2 meets requirements of high sensitivity in the SWIR range from 900nm to1700nm and with accompanied by extended wavelength from 400nm to 1700nm options. The camera for swir comes with PAL output and USB2.0 vision interface, supporting 14-bit data transfer and adjustable exposure time. The Short-Wave Infrared (SWIR) camera offers unique capabilities for various applications, such as in Industrial inspections as nondestructive test, Si wafer inspection, liquid level detection in packaging, laser beam profiling and process monitoring. Self-developed SWIR Camera Automatic on-board image processing Single point Correction TE Cooler TECHNICAL SPECIFICATION OF GH-SW640HS-U2 & GH-SW640HS-GNET SWIR CAMERA 1. Basic Specs Type GH-SW640HS-Gnet GH-SW640HS-U2 Frame Rate 100Hz 50Hz Integration Time 100s ~ 20ms/Max 9ms at 100Hz 100s ~ 20ms Digital Output GnetGigabit Network Port USB2.0 Trigger RS-422/TTL / 2. Key Specs Sensor GH-SW640HS Resolution 640 x 512 Spectral Response 0.9m ~ 1.7m Pixel Pitch 15m Active Area 9.6mm x 7.68mm Quantum Efficiency 70%1.0 m~ 1.6m Integration Type snapshot Pixel Capacity 99.5% Full Well Capacity 1.8Me- ADC 14bit Analog Video Output PALSMA Interface Software Windows Software/Windows SDK Power Input DC 12V ± 2V Power Dissipation 4WTEC OFF Dimensions 65mm58mm75mmwithout Lens Lens Mount C-Mount Operating Temp. -20 ~ +50 /-40 ~ +70 Optional Storage Temp. -40 ~ +80 On-Board Image Processing Single/two-point correction, bad pixel replacement, image denoising, image smoothing, controllable shutter compensation
Mimaki JV33 / JV5 Print Head - M007947 - 1440 dpi - 8 kHz Mimaki JV33 / JV5 Print Head with memory board - M007947 This original Mimaki JV33/JV5 printhead is suitable for the Mimaki solvent CJV / JV printer series. The Mimaki JV33/JV5 printhead has a native resolution of 1440dpi This generation of printheads allows fast speed, high resolution printing with eco-solvent and mild solvent inks. The original and complete Mimaki JV33/JV5 printhead is delivered with the Head ID and the Head Memory Board. Mimaki part number for this print head is M007947. Product Specifications : Technology: Micro-Piezo Native resolution: 1440 dpi Min. Droplet Size: 1.5 pico litre Max. Droplet Size: 21 pico litre Tot. Amount of Nozzles: 1440 (8 lines x 180 nozzles) Firing Frequency: 8 kHz Ink Compatibility: eco-solvent and mild solvent Printer compatibility : Mimaki CJV30-100 Mimaki CJV30-100BS Mimaki CJV30-130 Mimaki CJV30-130BS Mimaki CJV30-160 Mimaki CJV30-160BS Mimaki CJV30-60 Mimaki CJV30-60BS Mimaki JV33-130 Mimaki JV33-130BS Mimaki JV33-160 Mimaki JV33-160BS Mimaki JV33-260 Mimaki JV33-260BS Mimaki JV5-130S Mimaki JV5-160S Mimaki JV5-260S Mimaki JV5-320DS Mimaki JV5-320S Mimaki TPC-1000 Mimaki TS3-1600 Mimaki TS5-1600AMF
Portable Rolling Track Gauge Portable Rolling Track Gauge is mainly used for railway track gauge and super-elevation(cant), check rail gauge and back to back distance measurement.It can be used for track inspection and fine adjustment of rail gauge.This product has the advantages of fast measuring speed, stable pushing rod, easy to carry,and night-time and tunnel work,legible even in direct sunlight are supported.It is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying. Features The benefits of our rolling gauge : 1. Measure the track gauge, cant without bend over your back. 2. Light weight : around 6.5kg , one person operation. 3. BT connection, data uploading and analysis system. 4. High working efficiency. Save your man power. ( 1 man with 1 rolling gauge = 4 man with 4 normal digital track gauge) Specification Model (1435mm) GJC-JJG0 Track gauge 1410-1470mm Superelevation measuring range -185~+185mm Display mode OLED display and hand-held terminal display Supply Voltage DC3.4Vc5.2V (rechargeable battery) Superelevation division value 0.05mm Working temperature -30+55 Insulation performance 1M© Track gauge division value 0.01mm Superelevation division value 0.05mm Track gauge max indication error ±0.25mm Superelevation max indication error ±0.3mm Length 1700mm Net Weight 6.5kg
