1.)Performance specifications: 1. Machine model: DL-4100, 2. Capacity: 100L, 3. Temperature range: -40 -150 , 4. Humidity range: 20% -98% RH, 5. Temperature and humidity control accuracy: ± 0.5 ± 2% RH, *Attention: The performance guarantee of items # 2-4 above should be measured after 30 minutes of stable temperature sensing 6. The temperature and humidity are evenly distributed: ± 2.0 ± 5.0% RH, *Note: The performance guarantee of item # 5 above requires testing at a distance of 1/6 of each wall surface in the testing area, and must be measured after stabilizing with temperature and humidity for 30 minutes 7. Inner box size: 500 high Width 400 500mm deep, 8. Outer box size: 1700 high Width 1000 1500 mm deep, 9. Equipment placement space: at least 2000 2000 2000mm (W H D) , 10. Power supply: AC220V 4.5KW, 50HZ
1. Main technical parameters, Model: DL-7802B-6A13, Product Name: Wire Bending Testing Machine (Wire Swing Testing Machine), Test angle: 0~± 180 can be set arbitrarily, and the left and right angles can also be set to be inconsistent, Test speed: 0-100 times/min, set arbitrarily, Station: 6 stations in total, with each group recording the number of tests separately, Independent testing: Each group can be tested independently, and 6 groups can also be tested simultaneously, Counting setting range: 1~99999999 times, any setting, Shutdown method: Broken wire shutdown, can switch between single broken wire shutdown and 6 sets of broken wire shutdown, Weights: 6 each for 50g, 100g, 200g, 300g, and 500g, Machine size: 1400 450 1300mm (length, width, height), Machine weight: 130kg, Power supply: 1 AC220V 2A or specified, 2. Equipment Introduction The 360 degree swing testing machine meets the requirements of relevant standards such as UL817, such as "General Safety Requirements for Flexible Cord Components and Power Cords". Suitable for manufacturers and quality inspection departments to conduct bending life tests on power cables, DC cables, headphone cables, USB cables, etc. Used to test the reliability of wire products under specified speeds, angles, and weights.
Model: DL1220S Product name: Fully automatic insertion and extraction force testing machine Maximum test stroke: 0-150mm Maximum test speed: 0-300mm/min Maximum test load: 50kg Minimum fine adjustment distance: 0.01mm X-axis travel distance: 0-75mm Y-axis travel distance: 0-75mm Load units: N, lb, gf, Kgf can be freely switched Transmission mechanism: ball screw Power system: stepper motor Machine weight: 80kg Machine size 400 * 300 * 980mm Power supply 1 AC220V 2A or specified 2. Introduction This machine is suitable for testing various types of connectors, such as insertion force, extraction force, plastic retention force, and service life. Through computer analysis, it can accurately measure the load, stroke, and corresponding change curve of the tested object. It can also accurately control the stroke, speed, target measurement times, and pause time of connector insertion and extraction force testing. Especially with various specialized clamps and fixtures, the connectors can be more automatically centered and aligned during testing, without the problem of "eating one side" occurring. By using the Chinese screen settings in Windows, the operation is simple and convenient, and all data can be stored (such as test conditions, displacement, curve plots, life curve plots, inspection reports, etc.), making it a reliable high-performance testing instrument. Equipped with a dynamic impedance testing system, it can test the insertion and extraction force while also testing the dynamic impedance and drawing (load stroke impedance curve diagram)
Model: DL3020, Stroke mm: 300 * 200 * 200, Boundary dimension mm: 625 * 777 * 1080, Workbench mm: 460 * 360, Total weight (kg): 280KG, Glass bearing capacity (kg): 15, Z-axis lifting distance: 200MM, Working distance: 90 mm, Measurement accuracy UM: XY (3+L/200) um, Resolution of grating ruler: 1um, CCD resolution industrial grade: 800 line high-definition, Zoom objective magnification: 0.7-4.5X, Total magnification: 20-180 times, optional 20-220 times, Object field of view: 7-1.1MM, Surface light and contour light of the light source: white LED, with continuously adjustable brightness, Power supply: 220V �± 10%, 50 Hz. Electrical equipment requires reliable grounding: the grounding resistance is less than 4 ohms, Working environment: temperature 20 â??�± 5 â??, temperature change ï¼? 2 â??/hr, humidity 30-80%, vibration ï¼? 0.002g and lower than 15Hz, Imager characteristics: Utilize optical principles for non-contact measurement; Suitable for all fields with the purpose of two-dimensional measurement; It is the best measurement solution for small, thin, soft, and component parts; Accurate measurement can be achieved for elements such as points, lines, circles, angles, etc; And it has powerful report output function, high-quality, economical, and practical; Ultra high cost-effectiveness with all functions of flat measurement. imager: measure all plane dimensions; Hardware, main features: Fully cast aluminum worktable, column combination lightweight body. Precision transmission equipment design for fast movement. Precision P-level linear guide rail and V-shaped guide rail, with extremely high straightness, Ensure machine accuracy and service life. Sony Color CCD from Japan, with higher definition measurement images. Flexible lighting with contour light, surface light, and coaxial light (optional), high clarity, and unparalleled measurement accuracy. High precision optical ruler, every 1 micron is crucial.
b. Technical parameters: Measuring area: x=500mm, y=600mm, z=400mm Overall dimension: 1250 X 1380 X 2380 mm Workbench load-bearing Max Part Weight: 800kg Machine weight: 1800kg Length accuracy MPEe: â?¤ 1.7+L/300ï¼? �¼ M) Detection ball accuracy MPEp: â?¤ 2.5 �¼ M Scale resolution: 0.1um Max 3D Speed: 500mm/s Max 3D Acceleration: 900mm/s �² c. Advantages: Patient double passive vibration damping: The use of coordinate measuring machines is mainly in production factories, which inevitably leads to vibrations caused by nearby machine tools or transport vehicles, which has a fatal impact on the accuracy of coordinate measurement. Building earthquake resistant foundations is a basic idea, but it will increase additional costs and trouble. Our three coordinate support adopts a dual passive damping mechanism to prevent the impact of low-frequency vibration, greatly ensuring measurement accuracy and reducing the trouble of taking seismic foundation measures. High quality granite workbench: The granite work platform is the overall support of the machine, and its quality affects the overall performance of the machine. Our three-dimensional granite material is processed as a whole, stress free, rust and corrosion resistant, easy to maintain, low thermal expansion coefficient, and small deformation affected by temperature. Effectively reducing the vibration of the measuring machine and improving the performance of the entire machine DL-654 is a high-end bridge type coordinate measuring machine developed and designed independently. During the production process, every component is strictly screened, and during the assembly process, it ensures perfect and reasonable connection between the components. Then, it is calibrated according to the ISO10360-2 standard, using high-precision laser interferometers for calibration. Later, it is also tested using standard testing tools (square rulers and step gauges) certified by the DKD organization. Therefore, the final customer will use genuine German technology, high-quality, and high-precision coordinate measuring machines.
modelDL313082T Maximum compressive strength2T Degree of decomposition1250000 Testing accuracy05 Operation modeMicroprocessor Unit switching KgNLBKN Test spaceLWH8008001000mm Compression speed standard 103mmmin Report ItemsSerial number peak value average value set pressure holding value memorable Structure and controlMicrocomputer operating system servo motor ball screw Safety devices Overload protection overvoltage protection limit protection device External dimensions LWH14008001700mm Motor power 400W Net weight 400Kg source AC220V10 2 Product Usage The cardboard box compression testing machine is the most direct testing instrument for checking the compressive strength of cardboard boxes or other packaging containers It is used to determine the compressive capacity of cardboard boxes and can be used for testing the holding pressure stacking The test results can be an important reference for the height of finished packaging boxes stacked in factories or an important basis for designing packaging boxes It can execute national or international standards such as GB ISO ASTM BS DIN JIS for testing and is an ideal testing and research equipment for various factories technical supervision departments commodity inspection institutions research institutes and colleges and universities 3 Product features 1 The machine structure adopts an aluminum extruded sealing plate treated with advanced baking paint with builtin highprecision low resistance gapless double ball screws and guide columns improving load efficiency and structural rigidity 2 The control system adopts Panasonic digital AC server to control high response frequency AC motors ensuring high efficiency smooth transmission low noise and speed accuracy within 02 of the transmission system 3 The microcomputer system uses a commercial computer as the main control machine combined with our companys TM testing software to complete all experimental parameter settings working state control data collection and analysis processing result display and printing output 4 The product performance is stable and reliable with high measurement accuracy powerful testing software functions and easy to understand operation
Maximum test force:10KN Force unit:N Kgf ibf N KN Testing accuracy:Not greater than 1% of the total range Test itinerary:1100mm without fixture Print Project:After saving the data, it can be printed and converted into a PDF document Test speed:0-300mm/min computer settings Shutdown method:Automatic shutdown due to fracture control mode ;PC control Power source :Stepper motor Transmission mode :Ball screw drive Host size :Approximately 800 * 500 * 1550mm; Display method:Computer full Chinese display Testing items: Real time value, maximum value, fracture value, elongation, tear strength, proportion of fracture points, etc 2.1. Purpose: Test the tension, pressure, shear, peeling, tearing and other tests of metal, wire, leather, fabric, plastic and other products, and comply with various tensile and pressure testing standards. PC control, can input testing standards into the system, and conduct testing according to different standards. 2.2 Characteristics: This machine is driven by a stepper servo motor, ensuring smooth operation and low noise. The key components of this machine are all high-quality and reliable products, making your experiments precise and effective. This machine is fully computer-controlled and can save and print test data.
4.Main technical parameters 4.1. Capacity: 5, 10, 20, 25, 50100200kg (optional) 4.2. Unit switching: kg, N, LB 4.3. Load decomposition degree: 1/250,00 4.4. Load accuracy: 0.25% 4.5. Maximum stroke: 1000mm (excluding fixtures) 4.6. Test speed: 30-300 mm/min 4.7. Displacement resolution: 0.01 mm 4.8. Display device: touch screen (capable of displaying and printing test times, test values, maximum values, fracture values, etc.) 4.9. Motor: AC motor 4.10. Overall dimensions (L * W * H): 550 * 500 * 1240mm 4.11. Weight: 80kg 4.12. Power supply: 1 , 220V, 15A or specified 4.13. Delivery: One set of tension fixtures 5. Introduction to System Functions 5.1. It has tensile and pressure testing functions. 5.2. It has a pull stop function. 5.3. It can display displacement, has functions such as elongation, pressure, and other material testing machines. 5.4. There is an automatic stop alarm function for overload load setting. 5.5. It has an automatic save function, and can coexist with manual and automatic testing data up to ten times. 5.6. Use a list format to display the saved test data. 5.7. With an administrator password, users can modify their startup password to make machine management more secure. 5.8. Using software to calibrate the load value is extremely easy to calibrate. 5.9. The internal functions are set with full Chinese prompts, making the operation convenient and simple. 5.10. Rich testing functions, capable of conducting tensile tests, pressure tests, compressive tests, elongation tests, etc. 5.11. Display method: Real time display on the touch screen. 5.12. Tensile range: Standard configuration 200kg (optional). 5.13. The accuracy is 1/25000. 5.14. It can print test data and dates, making it easy to view test data for each stage 5.15. Conversion of three types of force units: N, Kg, and LB. During the testing process, 5 sets of test data at any position can be manually and automatically captured and printed. 7. Introduction This product tests the tensile strength, compressive strength, and elongation of various materials, semi-finished products, and finished products. It can perform tests such as peeling, tearing, bending, bending, and compression, and is suitable for use in industries such as metals, plastics, rubber, textiles, synthetic chemicals, wires and cables, leather, etc. 8. Design standards ASTM D903, GB/T16491, GB/T1040, GB/T8808, GB13022, GB/T 2790/2791/2792, CNS-11888, JIS K6854, PSTC-7, etc
Temperature range :RT~450 Temperature fluctuation : ±0.2 Temperature uniformity : ±1 Temperature display resolution: 0.1 Time display resolution:0.1S Barrel diameter: .095 ±0.005mm Outlet length: 8.000 ±0.025mm Loading cylinder diameter: 9.550 ±0.025mm Weight accuracy: ±0.5% Data output method:Micro automatic printing output Cutting method Integrated manual and automatic cutting Test load 8 levels in total, 8 sets of weights
Technical parameters Maximum test force 1000kg Unit of force N Kgf bf N KN Test accuracy Grade 0.1 Test stroke 2200mmWithout fixture Print items Save the data and then print, can be converted to PDF document. Test speed: 0-500mm/min computer Settings Shutdown mode: Break automatic stop Control mode PC control Power source servomotor
Abb power contactors, control relays, abb acb, legrand arteor series, mallia senses series, galion series, mallia senses switches, heaters, dimmers, door bells & chimes, light switches, mounting box, universal sockets, wall sockets, pneumatic cylinders, pneumatic sensors, hydraulic ball valve, solenoid valves, flow switches, positioners, pressure transmitters, variable speed motors, submersible motor pumps, openwell submersible pumps, variable frequency drive (vfd), plc & hmi, Modular switchboard and wiring accessories, energy management solutions, powergear products, gearbox & electric motors, pneumatics & hydraulics, water pumps, sensors.
Coal tar chemicals coal tar pitch: soft pitch,medium pitch, hard pitch hard pitch powder impregnation pitch low qi and zero qi pitch electrode pitch / binder pitch liquid pitch special pitch for special applications dehydrated coal tar oils: light creosote oil heavy creosote oil anthracene oil fuel oil naphthalene crude naphthalene refined naphthalene hot pressed naphthalene.Clearing agent, shipping and transporation
Padlock, long shackle, motorcycle lock, drawer lock, door closer hydraulic, measuring tape, aluminum miter, silicone gun, soldering iron, solder wire, drill bits, magnetic nut adapter, allen set, screwdriver, electrode holder, booster cable, steel forging adze, grade hammer, pipe shears , grease pump, stationary knife, utility knife, utility knife blade, punch set, glass scraping knife, saw blades, inox cutter, wire brush, punch cutter .
For Suzuki Motorbike OBD2 Diagnostic Connector Cable 16 Pin Socket to 6 Pin Plug For SUZUKI OBD2 6 Pin diagnostic Plug Adapter Cable For Motorcycle Bike ATV. 6 pin Plug Adapter for SUZUKI motorbikes. This adaptor converts a standard 16 pin OBD2 type plug to 6 pin plug for plugging into the motorbike diagnostic socket for CAN Bus models. The need for this connection exists because most modern motorcycle manufacturers still use a "make specific" diagnostic connector rather than OBD. The 16-pin female output is designed to connect with the OBD lI fault diagnosis machine. For data reading an OBD ll diagnostic machine is required. The extender is ideal for more comfortable access to the vehicle connector. Thanks to its length, it will allow you to have the OBD ll error diagnosis machine in a more convenient position while monitoring data in real time. Among the different values that can be monitored are the states of each component of the vehicle, error reading, display of engine parameters, among others. Ideal for vehicle maintenance that can be used both in mechanic workshops and home users.
High-performance flat OBD II extension cable compatible with Honda motorcycles with a 6-pin female connector that communicates with the vehicle's specific port. Adapts the 6-pin port to an ODB2 port for diagnostic with a common ODB2 reader. The 16-pin female output is designed to connect with the OBD lI fault diagnosis machine. For data reading an OBD ll diagnostic machine is required. This item is just the adapter, not a scanner. The extender is ideal for more comfortable access to the vehicle connector. Thanks to its length, it will allow you to have the OBD ll error diagnosis machine in a more convenient position while monitoring data in real time. Among the different values that can be monitored are the states of each component of the vehicle, error reading, display of engine parameters, among others.
Product Introduction of Stainless steel air filter housing The Stainless steel air filter housing matches various types of filter cartridge. Its reasonable designed shell & fine structure brings easily installing & cleaning. The product could meet the filtering requirements of many industries. Moreover, its design standard comply with the Chinese pharmaceutical industry "GMP" standard. The filter includes liquid filter and gas filter. Specification Filter housing material: SUS304, 316L Type: liquid, gas Filter cartridge length: 5" 10" 20" 30" 40" The connector between the body and the bottom: quick open & flange Outlet / inlet connector: quick open, screw thread & flange Gasket material: Silicone, NBR, EPDM, Viton End cap: various specifications Other: special specification of filter shell can be customized Application Usually it is used to filter liquid of various industry and air purification.
EV DC charger, energy vehicle 360-720KW, floor standing installation method, wiring mode down in and up out, output mode Double/Four/Six/Eight/Ten/Twelve etc connector, input frequency 50HZ ±10%, output voltage 200-750V/200-1000V, input voltage AC 380V �±15%, metering accuracy Level 0.5, single connector output current 0-250A, current limiting protection â?¥ 110%, interface 7 inch LCD color screen, LED indicator, working temperature -25--+50, operating humidity 5%-95% frost free, protection level IP54; cooling method forced air cooling, noise control 65dB.
Earth-like graphite, also known as microcrystalline graphite, earth-like graphite quality, high fixed carbon content, less harmful impurities, sulfur, iron content is very low, enjoy a high reputation in the domestic and foreign graphite market, known as "gold sand" reputation. Carbon content: 80%-99.9% Particle size: 200 mesh -0.5�¯�¿�½?�?�¼m Application: Earth graphite is widely used in casting paint, oil drilling, battery carbon rods, steel, casting materials, refractory materials, dyes, fuels, electrode paste, and used as pencils, welding rods, batteries, graphite emulsion, desulfurizer, preservative anti-slip agent, smelting carburizer, ingot protection slag, graphite bearing and other products.
(1) Manganese and manganese alloy is one of the indispensable raw materials in the iron and steel industry, aluminum alloy industry, magnetic material industry and chemical industry. (2) Manganese Metal is an indispensable additive in smelting industry. Electrolytic metal manganese processing into powder is the main raw material for the production of manganese tetroxide. (3) Electrolytic manganese metal due to its high purity, low impurity characteristics, has been successfully and widely used in iron and steel smelting, non-ferrous metallurgy, electronic technology, chemical industry, environmental protection, food hygiene, electrode industry, aerospace industry and other fields. (4) The purity of electrolytic manganese is very high, its role is to increase the hardness of metal materials, the most widely used in manganese copper alloy, manganese aluminum alloy, 200 series stainless steel. Manganese in these alloys can improve the strength, toughness, wear resistance and corrosion resistance of the alloy.
(1) Manganese and manganese alloy is one of the indispensable raw materials in the iron and steel industry, aluminium alloy industry, magnetic material industry and chemical industry. (2) Manganese Metal is an indispensable additive in smelting industry. Electrolytic metal manganese processing into powder is the main raw material for the production of manganese tetroxide. (3) Electrolytic manganese metal due to its high purity, low impurity characteristics, has been successfully and widely used in iron and steel smelting, non-ferrous metallurgy, electronic technology, chemical industry, environmental protection, food hygiene, electrode industry, aerospace industry and other fields. (4) The purity of electrolytic manganese is very high, its role is to increase the hardness of metal materials, the most widely used in manganese copper alloy, manganese aluminium alloy, 200 series stainless steel. Manganese in these alloys can improve the strength, toughness, wear resistance and corrosion resistance of the alloy.
