Advantages: Bar-break feature guarantees fully ductile elongation. No reduction of the bar cross-section area. Material of the rebar coupler is No.45 steel. Working principle: 1,First,We use GQ50 rebar cutting machine to splice up the end of rebar. 2,Secondly,we use Upset Forging Parallel Thread Machine (BDC-Auto1 Machine) to forge the end of rebar. 3.Third, we use Parallel Thread Cutting Machine (LW-I500 Machine) to thread the ends of the rebar which have been forged. 4.Fourth,an upsetting coupler is used to link the two ends of rebar in parallel thread.
1.Product parameter: The GL-12 Rebar Material Organizer & feeder Machine is widely cooperated with rebar automatic cutting,rebar upset forging,rebar thread cutting as well as thread rolling procedure,saves labor force and higher working efficiency in construction rebar mechanical splice technology .Its product design is compact,flexible and effective; and the unit size is 4m*3m*1.5m, which realizes the decomposition of the whole bundle of 16-40 rebars, the lateral displacement of the single rebar, the longitudinal fast forward, feeding and fast backward in work area and the second lateral displacement to the reservior. Use the Siemens frequency converter to regulate the moving speed. The cylinder controls the inverting and feeding of the material. The feeding speed is 0.5m/s. 2.Product features: 1.The equipment is very flexible to use and with widely scope application. The bottom bracket of GL-12 Rebar Material Organizer & Feeder Machine is detachable and equipped with adjustable anchor feet, which can adapt to different height of equipments application. The equipment adopts the design of application expansion and it is easy to combine and lengthen. It can adapt to rebars of varying length and various processing equipments as well as flexibly transmitting the rebar. The rebar material organizer is widely used in construction, expressway, nuclear power plant and other industries and applies to organizing and conveying the rebars of various specification and varying length. 2.Well-designed and efficient and durable We adopt the well-known brand motor and gear reducer to ensure product's durability. Use Siemens frequency converter to regulate the moving speed can effectively reduce the assistant machining time. The well-known brand large diameter cylinder to invert and feed is stable and durable. The specially designed turnover fixture is efficient and safe. The soft chain type collecting rack is well-adapted and capacious, and does little harm to rebar. Simple maintenance can ensure the normal operation as the simplified design can adapt to complicated processing environment, for which the purchase and use cost is low. Working Principle: Step1. Prepare rebars and use the crane to sling them on the shelf. Decompose the whole bundle of bars then can make the single ones lateral displacement. Step 2.Remove the single rebar to the working area by reversing device. The rebar can realize the the longitudinal fast forward, feeding and fast backward in this area. Step 3.Carry the rebar to the reservior through the second lateral displacement after processing and realize the storage function of rebar.
Product description Deformed steel bar Diameter 6-32mm Length 6, 9, 12m Standard Astm , bs, gb and so on Grade Hrb 335, hrb 400, hrb 500 A 615 gr40, a 615 gr60 Bs4449 gr 460 , 500b Application Building construction Market Mild east, north/south america, europe, asia, africa etc Certificate Bv, sgs, mtc Delivery time Within 30 days Payment terms 30% tt, or 100% l/c at sight Package Suitable for export with bundles Port of loading Tanjin port, china -
The material of the cold extrusion rebar coupler is no.20 steel. The features of this technology: 1.Strong intensity connector, stable and reliable; no specific requirements on the weld ability of the rebar; 2.Only needs 1-3m to stamp each connector, which is about ten times faster than ordinary welding; 3.Only 1-3 kw power of oil pump , which is not limited by power capacity, has flexible structure and suitable for operation on several machines; Yj650 stamping equipment 4.No flammable gases, not affected by rainy or cold weather; 5.Relieve congestion of the connecting point, facilitated concrete pouring; 6.No professional and experienced worker needed, able to connect changed steel bar of different diameters; 7.Save 80% of connector steel consumption. The technology is assessed by the ministry of construction as "world advanced, high quality, high efficiency, safe, and economical thick diameter distorted steel bar connection technology which can be widely used in the construction industry." Cold extrusion application principle: 1.Place it well at the working point. 2.Directly use it to press connection point with screwless couplers to link the two rebar. -
Rebar diameter range: 16-40 Output speed Reducer: 62r/min Electric motor power: 5.5KW Water pump motor power: 0.15KW Cutting head movement distance: 150mm Or unlimited Out dimension(mm): 1700*1000*1400mm Weight: 1200Kg This machine is used to cut the thread for rebar end after cold forging.And it can also be used for thread rolling as well as bolt length above 500mm,unlimited length bolts.
Production: GQ40 /GQ50 rebar cutting machine is an ideal equipment for steel bar cutting. It can be applied to cut the normal carbon steel rod, hot rolled steel and deformed bar in machine processing and construction projects, also suit for square steel and flat steel. Main Features: 1.Enhanced machine rack, small volume, compact structure, solid and reliable. 2.Good lubricating property, adopt anclosed gear box, use the gear splashing to realize lubrication. It could be continuous work two months after adding 8kg gear oil. 3.Less function loss because of the lubrication improvement. The gear section adopts rolling bearing, less resistance. Compared with same type cutting machine, load power can be reduced by one third. 4.Using high rigid cutting head, connecting rod and high speed national standard motor, guaranteed a more stable quality and longer service life. 5.It's convenient to be moved and maintenance.
Rebar Couplers simplify the design and construction of reinforced concrete and reduce the amount of reinforcement required.
The material of the splicing coupler is constructional quality steel of no.45 steel. Working principle: 1)slice up the end of the rebar; 2)peel the rib of the end of rebar with specialty rib peeling parallel thread rolling machine; 3)connect the two ends of rebar with rib peeling thread coupler; The characteristics of the usage: 1.Standard model: used in the occasion for connecting the steel bar in normal situation. 2.Different diameter model: used for connecting the steel bar in different diameters. 3.Flared model: used for the steel bar which was hard to match. 4.Positive and negative screw thread model: used in the occasion when the two sides both can not be turned but the lengths can be adjusted. 5.Locking nut model: used when the steel bar can not be turned, then it turns the splicing coupler to join the steel bar and then lock the splicing coupler with the locking nut.
Advantages: Bar-break feature guarantees fully ductile elongation. No reduction of the bar cross-section area. Working principle: 1, first, we use gq50 rebar cutting machine to splice up the end of rebar. 2, secondly, we use upset forging parallel thread machine (bdc-auto1 machine) to forge the end of rebar. 3.Third, we use parallel thread cutting machine (lw-i500 machine) to thread the ends of the rebar which have been forged. 4.Fourth, an upsetting coupler is used to link the two ends of rebar in parallel thread.
1)Production: GQ40 rebar cutting machine is an ideal equipment for steel bar cutting. It can be applied to cut the normal carbon steel rod, hot rolled steel and deformed bar in machine processing and construction projects, also suit for square steel and flat steel. 2)Main Features: 1.Enhanced machine rack, small volume, compact structure, solid and reliable. 2.Good lubricating property, adopt anclosed gear box, use the gear splashing to realize lubrication. It could be continuous work two months after adding 8kg gear oil. 3.Less function loss because of the lubrication improvement. The gear section adopts rolling bearing, less resistance. Compared with same type cutting machine, load power can be reduced by one third. 4.Using high rigid cutting head, connecting rod and high speed national standard motor, guaranteed a more stable quality and longer service life. 5.It's convenient to be moved and maintenance.
Application guide: Proper installation is very important to ensure the design load will be reached in the application. Yida strongly recommends that the installation and site quality check be done according to the required guidelines and dimensions. Site installation method: 1.Screw the bolt into female coupler swaged with rebar, till unable to screw continually. 2.Screw another side of bolt into the other sleeve after swaged with rebar, till unable to screw continually. 3.sWith the help of two pipe wrenches, tighten the connection by turning both rebar/couplers in opposite direction at the same time.
1. The automatic rebar bending machine with straightening function, variety functions provided. 2. This machine can processing variety size and shape of steel bars with the intelligent control. 3. Our machine can processing from the raw material to the stirrup products at one time, and can both cold working and hot working with the high strength wire rod steel. 4. High production efficiency, equal with 20-30 workers’ handwork. 5. Our machine is practical, only need one operator, it save a lot of labor. 6. It save raw material, due to the one take forming in operation, no other rebar material loss. 7. This machine only takes a small land occupancy area, it save the area of straitening and cutting, this machine can operate in a narrow area. 8. Compare with the traditional half mechanization production, the cost of equipment maintenance and energy consumption is very low.
Introduction Model number D12-D50 Raw material 45# high quality carbon steel; 40Cr Material 45# carbon steel Thread parallel thread Thread Pitch 2.5mm, 3.0mm, 3.5mm Thread angel 60/75 Certification ISO9001 Standard JG/T163-2013 Outer diameter 22mm-59mm Length 40mm-90mm Finish plain/ smooth Customizde remark available Type left-handed, right-handed, reduce, etc Application connecting steel rebars in construction Tensile Strength 100% bar break more than 600Mpa Technics cold extrusion or upset Specification 1.Use to splice rebar dia 12--50mm; 2.Apply to HRB335, HRB400 and HRB500 reinforced the connection; 3.High strength, tensile test usually more than 600Mpa, reach 110% of yiled strength of parent rebar; 4.Standard type, left-handed and right-handed type, reducing type, wide mouth type, nut locking type ect; 5.Raw material-saving, high energy conversation, high work efficiency; 6.Satisfy the rebar splicing needs of longitudinal, traverse and slant ect.; 7.No pollution, not influenced by weather and work-site; 8.Reliable quality, the raw material origin and production batch can be traced; 9.High dimension precision, and reliable quality; 10.Easy to operate, no torque wrench required. Packing & Delivery carton case and wooden pallet or customized Delivery Detail: within 7 days after receiving payment Paymant Terms: L/C,D/A,D/P,T/T,Western Union Our Service 1.OEM Service & Design Service & Buyer Lable are offered; 2.Prodece as customers' requirement. 3.We have done official tensile test in Korea, Russia, Saudi Arabia, Vietnam, ect. 4.Our rebar couplers are suitable for steels of different countries Company Information Baoding Jindi Machinery Co., Ltd. is specialized in rebar splicing equipment, rebar processing machinery, rebar coupler and related products. With super quality and satisfactory after-sale service, our products have enjoyed good reputation in the world market. Our products have got through relevant certificatesand testing reports, such as CE, SGS, GOST, etc. And also our company achieved ISO9001certificate.So far, our products have been selling to global market like Vietnam, India, South Korea, Indonesia, Malaysia, Brunei, Philippines, Thailand, UAE, Saudi Arabia, Kuwait, Iran, Kenya, Brazil, Peru, Bolivia, Columbia, USA, Mexico, etc. In the future, we will do our utmost to make work better and perfect, to build up the famous "Jindi" brand in this field.
Introduction Model number D12-D50 Raw material 45# high quality carbon steel; 40Cr Material 45# carbon steel Thread parallel thread Thread Pitch 2.5mm, 3.0mm, 3.5mm Thread angel 60/75 Certification ISO9001 Standard JG/T163-2013 Outer diameter 22mm-59mm Length 40mm-90mm Finish plain/ smooth Customizde remark available Type left-handed, right-handed, reduce, etc Application connecting steel rebars in construction Tensile Strength 100% bar break more than 600Mpa Technics cold extrusion or upset Specification 1.Use to splice rebar dia 12--50mm; 2.Apply to HRB335, HRB400 and HRB500 reinforced the connection; 3.High strength, tensile test usually more than 600Mpa, reach 110% of yiled strength of parent rebar; 4.Standard type, left-handed and right-handed type, reducing type, wide mouth type, nut locking type ect; 5.Raw material-saving, high energy conversation, high work efficiency; 6.Satisfy the rebar splicing needs of longitudinal, traverse and slant ect.; 7.No pollution, not influenced by weather and work-site; 8.Reliable quality, the raw material origin and production batch can be traced; 9.High dimension precision, and reliable quality; 10.Easy to operate, no torque wrench required. Packing & Delivery carton case and wooden pallet or customized Delivery Detail: within 7 days after receiving payment Paymant Terms: L/C,D/A,D/P,T/T,Western Union Our Service 1.OEM Service & Design Service & Buyer Lable are offered; 2.Prodece as customers' requirement. 3.We have done official tensile test in Korea, Russia, Saudi Arabia, Vietnam, ect. 4.Our rebar couplers are suitable for steels of different countries Company Information Baoding Jindi Machinery Co., Ltd. is specialized in rebar splicing equipment, rebar processing machinery, rebar coupler and related products. With super quality and satisfactory after-sale service, our products have enjoyed good reputation in the world market. Our products have got through relevant certificatesand testing reports, such as CE, SGS, GOST, etc. And also our company achieved ISO9001certificate.So far, our products have been selling to global market like Vietnam, India, South Korea, Indonesia, Malaysia, Brunei, Philippines, Thailand, UAE, Saudi Arabia, Kuwait, Iran, Kenya, Brazil, Peru, Bolivia, Columbia, USA, Mexico, etc. In the future, we will do our utmost to make work better and perfect, to build up the famous "Jindi" brand in this field.
Specifications-steel truss 1. Upper wire diameter : from 5-12mm 2. Lower wire diameter :from 5-12mm 3. Diagonal wire diameter: from 4-10mm 4. Steel truss length:from 3-12m 5. Steel truss width:100-150mm 6. Steel truss height: from 100-150mm Applications for steel truss: 1 steel truss applied to precast slabs, pre-high-speed railway sleeper. 2 used in many high-rise, ultra- high-rise steel buildings 3 used for steel building, mezzanine floor of “loft” 4 the force applied to the complex, special-shaped structure, building 5 used in-situ concrete structure(rc) buildings Td1-70, td1-80, td1-90, td1-100, td1-110, td1-120, td2-70, td2-80, td2-90, td2-100, td2-110, td2-120, td2-130, td2-140, td2-150, td2-160, td2-170, td3-70, td3-80, td3-90, td3-100, td3-110, td3-120, td3-130, td3-140, td3-150, td3-160, td3-170, td4-70, td4-80, td4-90, td4-100, td4-110, td4-120, td4-130, td4-140, td4-150, td4-160, td4-170, td4-180, td4-190, td4-200, td4-210, td4-220, td4-230, td4-240, td4-250, td4-260, td4-270, td5-70, td5-80, td5-90, td5-100, td5-110, td5-120, td5-130, td5-140, td5-150, td5-160, td5-170, td6-70, td6-80, td6-90, td6-100, td6-110, td6-120, td6-130, td6-140, td6-150, td6-160, td6-170, td6-180, td6-190, td6-200, td6-210, td6-220, td6-230, td6-240, td6-250, td6-260, td6-270, td7-70, td7-80, td7-90, td7-100, td7-110, td7-120, td7-130, td7-140, td7-150, td7-160, td7-170, td7-180, td7-190, td7-200, td7-210, td7-220, td7-230, td7-240, td7-250, td7-260, td7-270
1.Type:Mushroom Rebar cap/Plastic rebar cap 2. Raw material: plastic 3. it is used for rebar,and avoid the rain,water and others. 4. different size and color according to customer's need. 5. the method is injection molding. 6. Size: used for 9-16mm,20-25m,28-32mm bar steel
SABIC Rebar steel 8mm - 32mm
Product Name: Concrete reinforcing bar FE500 Length: 12 meters Diameter: 6mm / 10mm Quantity per price: 1 metric ton
Say goodbye to traditional rebar splicing methods and hello to the convenience of taper rebar couplers! These mechanical splices join bars with matching tapered threads, making rebar splicing a breeze. With the ability to join any bar-to-bar connection of the same size, where one bar can be rotated, taper rebar couplers simplify rebar splicing in areas where rebar congestion prevents the use of long lap splices.
Rebar couplers are a great way to connect reinforcing bars in concrete structures. They are faster, safer, and more economical than lap splices or welded connections.
