1/3.3" wide dynamic range cmos sensor/ 3.3-12mm varifocal lens/ minimum illumination - 0 lux/ backlight compensation/ auto white balance/ automatic gain control/ motion detection feature/ ip66-rated weather-proof housing/ privacy masking/ power supply - 12 vdc / poe
Megapixel resolution (1600 x 1200) to capture small details and better identify subjects/ quad streaming mpeg4/jpeg video/ comes with free 16-ch recording software/ two versions available: poe, non-wireless (ik-wb16a) and 802.11n wireless (ik-wb16a-w)/ up to 30 frames per second/ pan range of -175° to +175°/ tilt range of +90° to -23°/ 4x digital zoom/ two-way audio/ micro sd card slot for local recording/ 0.2 lux minimum illumination shipped fully assembled and ready to install
The COVID-19 IgG/IgM (Whole Blood/Serum/Plasma) Rapid Test Device utilizes lateral flow technology that is used for the qualitative, differential detection of both anti-SARS-CoV-2 IgM and IgG antibodies. In general, antibodies can be detected 1-3 weeks after infection. This test is intended to screen patients for COVID-19. Combining RNA and Antibody tests can significantly raise the sensitivity for detecting COVID-19 in infected individuals. This test has been authorized by the FDA under a EUA for professional use CLIA and CLIA WAIVED for Point Of Care. This test has been authorized only for the presence of IgM and IgG antibodies against SARS-CoV-2, not for any other viruses or pathogens. This product is intended for professional use and not for home use. FACT SHEET FOR HEALTHCARE PROVIDERS This test has been authorized by the FDA under a EUA for use by authorized CLIA laboratories. This device is CLIA waived for point of care use for fingerstick whole blood specimens only. The user should be trained in the procedure. Wear appropriate protective attire for your safety when handling patient samples. This test has been authorized only for the presence of IgM and IgG antibodies against SARS-CoV-2, not for any other viruses or pathogens. There should be a blue line in the control region (next to ) before testing, discard the device if there is no blue line.
100% MADE IN CANADA with 100% Canadian made raw materials. The MSL1PM is a 3 layer procedural mask with ear loops intended for use in clinical applications. Mediguard Systems of Canada is a Health Canada registered medical device establishment, we are ISO 13485 compliant, we are authorized for the production and distribution of all Class 1 medical devices, and serve a global client base FLUID RESISTANCE, mmHg 80 BFE â?¥ 95% PFE, @ 0.1 micron â?¥ 95% DELTA P, mm H2O/cm2 < 4.0 FLAME SPREAD CLASS 1 Take advantage of the high level of compliance offered by ASTM standards and the low exchange rate of our Canadian Dollar.
100% MADE IN CANADA with 100% Canadian made raw materials. The MSL2PM is a 3 layer procedural mask with ear loops intended for use in clinical applications. Mediguard Systems of Canada is a Health Canada registered medical device establishment, we are ISO 13485 compliant, we are authorized for the production and distribution of all Class 1 medical devices, and serve a global client base FLUID RESISTANCE, mmHg - 120 BFE - 98% PFE, @ 0.1 micron - 98% DELTA P, mm H2O/cm2 - < 5.0 FLAME SPREAD - CLASS 1 Take advantage of the high level of compliance offered by ASTM standards and the low exchange rate of our Canadian Dollar.
100% MADE IN CANADA with 100% Canadian made raw materials. The MSK95PR is a 5 layer particulate respirator with ear loops intended for use in civil applications. Mediguard Systems of Canada is a Health Canada registered medical device establishment, we are ISO 13485 compliant, we are authorized for the production and distribution of all Class 1 medical devices, and serve a global client base PFE, @ 0.1 micron 95% DELTA P, mm H2O/cm2 < 4.0 FLAME SPREAD CLASS 1 Take advantage of the high level of compliance offered by Canadian Production and the low exchange rate of our Canadian Dollar.
Nanofiber filtration layer that does NOT rely on static electricity for functionality of filtration efficiency 12 YEAR SHELF LIFE FDA 510k cleared mask CE FFP2 NR certified mask (Certification No: 2163-PPE-1433) High breathability using nanofiber technology Strong moisture control with 0.1 m filtration efficiency Lightweight design with each mask weighing less than 4.38g 3-layer ergonomic design covering nose to chin Functional nose support with a wired flexible fit Firm mask structure prevents falling off and fogging of glasses Flexible nylon straps that maintain elasticity after long use Made in South Korea using patented manufacturing processes with ISO certified facilities BFE / PFE 97% Test Agent NaCl and paraffin oil Flow Rate 95 L/min T.I.L 2.5% leakage Inhalation Resistance 33 Pa (at 30 L/min) Max Pressure 112 Pa (at 95 L/min)
Meets NIOSH inhalation and exhalation resistance testing procedures: CFR 84.172 . Meets FDA/NIOSH MOU 225-18-006 approved for Surgical setting use 99% BFE (Bacterial Filtration Efficiency) according to ASTM F2101. 99.7% Filter Efficiency according to ICS Laboratories Inc. Berry Amendment (10 U.S.C. 2533a) compliant. Pre-formed for secure fit. Moldable nose clip will help provide custom fit and secure seal. Available in Small and Regular Latex free: Yes Model: Molded Cup Outer Layer: Spun bound cloth/non-woven fabric Filter: Melt-blown non-woven fabric (2 layers) Inner Layer: Needle punch cotton Nose Clip: 1mm Thick Metal Nose Foam: Spandex filament sponge bar Headband: Nylon string Breathing valve: N/A
Health Canada Authorised Rapid Test The COVID-19 antigen rapid test device is a lateral flow in-vitro immunoassay intended to be used for the qualitative detection of the SARS-CoV-2 viral nucleoprotein. This device will detect both viable and nonviable virus in both nasopharyngeal and oropharyngeal secretions. This test had been authorized for point of care use by Health Canada and is available for immediate dispatch MediGuard Systems of Canada is an Authorised distributor of the Assuretech Rapid Antigen test. Support documentation and details available on request
Audio systems, home theater, acoustic panels.
Solar Power Generator.
Solar panels, solar off grid systems, solar water pumps.
Medical equipment like hospital beds, surgical tables, disposables, ultrasound machines and lab equipment.
Medical capital equipment like X-Ray, CT, MRI Ultrasound.
GPS, bicycle parts, musical instrument, remote control.
Vehicle, truck camera parts, camera solution, car camera, MDVR, vehicle safety product.
Wheat Germ Is The Small, Nutrient-Containing Center Of A Wheat Kernel, Comprising Only About 2.5% Of The Weight Of The Kernel, But Packing A Very Beneficial List Of Attributes. The Health Benefits Of Wheat Germ Include A Boost To The Immune System And A Preventative Measure Against Cardiovascular Disease And Cancer. It Has Anti-Aging Properties, And Can Positively Affect Mental Agility, Muscle Development, Stamina, And The Healing Rate For Wounds. The Nutrients In Wheat Germs Can Also Aid In Digestion, Prevent Damage To The Arteries, And Help In Efforts To Lose Weight.
Canadian made astm surgical masks, covid 19 ivd rapid testing kits , surgical supplies, medical equipment.
recycling system is a large recycling machine launched by Recycling, which is specially used for recycling beads. First, waste is broken into beads. These beads are the that make up . Then, the reusable beads and the non-reusable beads are separated by the recycling system, and finally, the use of recycled beads and beads is realized. materials are mixed to manufacture new products.
Teaho Import and Export Co.,LTD., established in 2009 and located in AHCOF International Trade Center of Hefei City, Anhui Province, China, has been engaged in the fabricating and selling components of chassis system. With high reputation, our products have been exported to more than 80 countries throughout South America, Asia and Europe. Anhe Auto Parts Co., Ltd., the sole subsidiary established in 2011 and located in the Industrial Park of Jinzhai, Anhui Province, is dedicated to the production regarding shock absorber and suspension coil spring. The company has passed the ISO9001:2000 and ISO / TS16949:2002 Certification, thus guaranteeing the high quality of products. We have spent 5 years to develop a specialized shock absorber for South America market. This type of shock absorber has been well accepted and approved by the customers in South America based on its shelf life and driving comfortableness. In addition, we provide frequent technical training for operators to gain a better work habits and sophisticated skill. Our products scope Shock Absorber ,Coil Spring Strut Mount, Crossmember; Rack End Tie Rod End,Ball Joint ;Stabilizer Link , Suitable for the below: Japan series, Korean series, American series, German series and French series. We own a sole subsidiary factory named Anhe and another 3 joint-ventured factories. During these years, we have always adopted the most advanced and sophisticated production line as well as advanced processing technology and test method, including NC boring machine, NC lathe, NC drilling machine, tricolor measuring machine and so on.. All these machines and measuring instruments are favorable for the manufacturing of top-quality products. Although we are surrounded by a fiercely competitive auto industry, we are constantly improving the products series and imposing a strict requirement on the product quality control. Throughout these years, we adhere to the management on the processing technology and standard, provide the most reliable and top-quality products as well as offer a more favorable payments terms for the long-term business partners. We give priority to the honesty and trustworthiness to our customers, thus creating more value for them. Teaho Import and Export Co.,LTD. will be your trusted and trustworthy business partner in auto parts industry throughout the South America. Looking forward to start cooperation and draw a more beautiful future with you!
