Specifications: API SG/CD Packaging: 1 L metal container 12 units / case 4 L metal container 4 units / case 5 L metal container 4 units / case 20 L plastic container 1 unit / case 208 L drum TECHNOL EXTRA 20W-50 has been formulated for both gasoline and diesel engines of passenger cars and light commercial vehicles of previous generation. This engine oil is perfectly adapted to vehicles equipped with catalysts and using unleaded fuel. It has thermal stability, antioxidant, antiwear and anticorrosion properties, contains detergent and dispersants that keep the engine clean and preserve its power.
Meets the requirements of: MB 228.1 MAN 3275 Volvo VDS-3 Deutz DQC III CAT ECF-1a Cummins CES 20077 Mack EO-N MTU 2.0 Renault RLD-2 JASO DH-1 Specifications: API CH-4/SJ ACEA E7-2016 TECHNOL POWER 15W-40 is an engine oil formulated through the use of high quality base oils and additives to fulfill the requirements of trucks with heavy-duty engines used for long distances. Its high viscosity index and thermal stability enable proper lubrication of moving components of the engine under most severe operating conditions. Thanks to its outstanding dispersant and antiwear properties, this engine oil ensures good engine cleanliness and provides protection for the moving components of the engine. It is recommended for use in Euro 3 and the previous generation of engines of most American and European manufacturers.
Meets the requirements of: Cummins CES 20081 MB 228.31/228.51 MAN M3677/3477/3575/3271-1 Volvo VDS-4 RVI RLD-3/RLD-2 JASO DH-2 MACK EO-N Premium Plus MACK EO-O Premium Plus CAT ECF-3 Detroit Diesel 93K218 MTU Oil Category 3.1/2.1 Deutz DQC-IV-10 LA Scania LA Scania LDF-4 Voith Class B / MB 235.28 Specifications: API CJ-4 ACEA 2016 E4/E6/E7/E9 TECHNOL POWER LD 10W-40 is a synthetic technology engine oil that has been formulated to satisfy the most stringent requirements of on-road trucks with heavy duty diesel engines. It is also suitable for use in most gasoline engines. This engine oil protects diesel engines equipped with post-treatment systems, such as diesel particulate filters (DPF), thanks to its specific Low SAPS technology (low content in Sulphated Ash, Phosphorus, and Sulphur). This engine oil provides outstanding resistance to oxidation and corrosion, contains detergents and dispersants that keep the engine clean and possesses antirust, and antiwear properties. Its high viscosity index and thermal stability ensure proper lubrication of moving components of the engine under most severe operating conditions. With its extended drain intervals, use of this engine oil helps reduce maintenance costs. It is recommended for use in Euro 4 and Euro 5 engines of most manufacturers.
Meets the requirements of: VW 502.00/505.00 MB 229.5/226.5 PORSCHE A40 RN 0700/0710 PSA B71 2296 Specifications: API SN/CF ACEA A3/B4 Packaging: 1 L Plastic 12 units / case 4 L Plastic 4 units / case 5 L Plastic 4 units / case 208 L Drum -
Meets the requirements of: MB 228.1 MAN 3275 Volvo VDS-3 Deutz DQC III CAT ECF-1a Cummins CES 20077 Mack EO-N MTU 2.0 Renault RLD-2 JASO DH-1 Specifications: API CH-4/SJ ACEA E7-2016 Packaging: 7 L plastic container 3 unit / case 20 L plastic container 1 unit / case 208 L drum - TECHNOL POWER 15W-40 is an engine oil formulated through the use of high quality base oils and additives to fulfill the requirements of trucks with heavy-duty engines used for long distances. Its high viscosity index and thermal stability enable proper lubrication of moving components of the engine under most severe operating conditions. Thanks to its outstanding dispersant and antiwear properties, this engine oil ensures good engine cleanliness and provides protection for the moving components of the engine. It is recommended for use in Euro 3 and the previous generation of engines of most American and European manufacturers.
Meets the requirements of: Dexron III H Ford Mercon MB 236.20 Ford ESP M2C 166-H Ford ESP M2C 138-CJ CAT TO-2 Allison C4 Packaging: 1 L metal container 12 units / case 4 L metal container 4 units / case 20 L plastic container 1 unit / case TECHNOL ATF III H is a high quality automatic transmission fluid formulated for automatic, semi-automatic transmissions, and torque converters of passenger, light commercial and industrial vehicles that require GM DEXRON III H or Mercon. This fluid can also be used for hydrostatic transmissions, power steering and hydraulic systems. Having a high viscosity index, this fluid provides excellent resistance to corrosion and foam formation. It also has outstanding thermal stability, antioxidant, antirust, antiwear properties and offers high-level protection under all conditions. Its excellent friction properties meeting the requirements of GENERAL MOTORS Hydramatic ensure smooth gear shifting. 208 L drum -
Specifications: API GL-5 Packaging: 1 L metal container 12 units / case 4 L metal container 4 units / case 20 L plastic container 1 unit / case 208 L drum - TECHNOL GEAR OIL 80W-90 GL-5 is an extreme pressure gear oil produced using selected high quality mineral base oils to fulfill stringent requirements of manual gearboxes, transfer boxes, rear axles, and differentials of passenger, commercial and industrial vehicles which require API GL-5. Its high viscosity index ensures excellent lubrication of moving gear components and improves gear shifts at very low and very high temperatures and its high thermal stability provides protection against deposit formation. This fluid has excellent antioxidant, antiwear, antifoaming, anticorrosion, antirust and load carrying properties.
Characteristics Density at 15C kgm3 1075 Boiling temperature C 190 Pour Point 50 diluted 40 pH 86 Packaging 1 L plastic container 12 units case 5 L plastic container 4 units case 200 L drum TECHNOL 4 SEASONS ANTIFREEZE COOLANT RED G12 is Monoethylene Glycolbased antifreeze coolant of red color that can be used throughout the year It has been diluted with demineralized water in a 5050 ratio and is intended for use in cooling systems of both gasoline and diesel engines of modern vehicles It ensures maximum protection against winter freezeups 40 summer boilovers 110 rust and corrosion of all metal parts prevents foam formation and ensures heat transfer It does not contain amines nitrites or phosphates It must not be mixed with different colors or types of antifreeze coolant
Characteristics Density at 15C kgm3 1075 Boiling temperature C 190 Pour Point 50 diluted 40 pH 86 Packaging 1 L plastic container 12 units case 5 L plastic container 4 units case 200 L drum TECHNOL 4 SEASONS ANTIFREEZE COOLANT BLUE G11 is Monoethylene Glycolbased antifreeze coolant of blue color that can be used throughout the year It has been diluted with demineralized water in a 5050 ratio and is intended for use in cooling systems of both gasoline and diesel engines It ensures maximum protection against winter freezeups 40 summer boilovers 110 rust and corrosion of all metal parts and ensures heat transfer It does not contain amines It must not be mixed with different colors or types of antifreeze coolant
Characteristics Density at 15C kgm3 1075 Boiling temperature C 190 Pour Point 50 diluted 40 pH 86 Packaging 1 L plastic container 12 units case 5 L plastic container 4 units case 200 L drum TECHNOL 4 SEASONS ANTIFREEZE COOLANT GREEN G11 is Monoethylene Glycolbased antifreeze coolant of green color that can be used throughout the year It has been diluted with demineralized water in a 5050 ratio and is intended for use in cooling systems of both gasoline and diesel engines It ensures maximum protection against winter freezeups 40 summer boilovers 110 rust and corrosion of all metal parts and ensures heat transfer It does not contain amines It must not be mixed with different colors or types of antifreeze coolant
Packaging: 0.9 kg plastic container 12 4 kg plastic container 1 15 kg plastic container 1 175 kg drum - TECHNOL LITOL-24 is a multipurpose lithium grease formulated with high quality mineral base oils and a lithium soap thickener. It is suitable for use in plain and rolling bearings, sliding surfaces, friction units of wheeled and tracked vehicles, industrial, agricultural, and construction equipment and marine machinery for various purposes under extreme operating conditions. This grease possesses high viscosity and exhibits outstanding resistance to oxidation, wear, corrosion, and rust. It has been formulated to provide excellent protection against high temperatures, extreme pressure, and shock loads. It is recommended for use in the temperature range from -40 C to 120 C.
Packaging: 0.9 kg plastic container 12 4 kg plastic container 1 15 kg plastic container 1 175 kg drum - TECHNOL SOLIDOL is a water-resistant multipurpose calcium grease made of high quality mineral base oils and a calcium soap thickener. This grease is used in a wide range of applications, including lubrication of chassis, rolling and sliding friction units of various machines, and mechanisms operating under medium load and speed conditions. Thanks to its antioxidant, anticorrosion and antirust properties, this grease ensures protection against oxidation, corrosion and rust, extending the service life of the lubricated components. It provides excellent water resistance and possesses high mechanical stability. It is recommended for use in the temperature range from -25 C to 65 C.
Specifications: API CF Packaging: 1 L metal container 12 units / case 4 L metal container 4 units / case 5 L metal container 4 units / case 7 L metal container 3 units / case 208 L drum - TECHNOL TURBODIESEL 15W-40 has been formulated to fulfill the requirements of turbocharged and naturally aspirated diesel engines of light industrial vehicles, equipped with or without catalysts, operating under normal conditions. This engine oil possesses thermal stability, detergent and antiwear properties, provides resistance to oxidation and corrosion, and ensures immediate lubrication of engine components at cold starts. It is suitable for use under all operating conditions in all seasons.
Approvals: MB-Approval 229.51 Meets the requirements of: BMW LL-04 GM DEXOS 2 RN0700/0710 MB 229.51/31/226.5 Specifications: API SN/CF ACEA C2/C3 TECHNOL PLATINUM 5W-30 is a new generation of Low SAPS (low content in Sulphated Ash, Phosphorus, and Sulphur) engine oil specifically formulated to meet the technical requirements of gasoline and diesel engines of new vehicle models. Its Low SAPS technology makes it the lubricant of choice for optimal operation of engines of the latest generation, equipped with anti-pollutant devices. This engine oil ensures the optimal functioning of three-way catalytic converters and particulate filters and compliance with performance levels declared by vehicle manufacturers, and Euro V environmental standards. Its excellent resistance to temperature variations guarantees the longevity of engine parts and optimal performance under all circumstances.
Meets the requirements of: GM DEXOS1 GEN2 Specifications: API SN ILSAC GF-5 TECHNOL HYBRID 5W-30 is a fully synthetic engine oil specifically formulated for use in hybrid vehicles. This engine oil delivers outstanding fuel economy and performance under most demanding operating conditions, thanks to its high quality base oils and additives. It possesses anticorrosion, antioxidant, and antifoaming properties and contains detergents and dispersants that keep the engine clean and preserve its power. Its very stable viscosity index ensures excellent lubrication of the moving components of the engine and protects it against wear and tear at low and high temperatures all year round.
Meets the requirements: MB 229.1/229.3 VW 502.00/505.00 PSA B71 2300 RN 0700/0710 Specifications: API SN/CF ACEA A3/B4 Packaging: 1 L plastic 12 units / case 4 L plastic 4 units / case 5 L plastic 4 units / case 208 L drum - TECHNOL GOLD 10W-40 is a synthetic technology engine oil that has been developed to cover the most stringent requirements of engines of both gasoline and diesel passenger vehicles. Satisfying rigorous standards by vehicle manufacturers, this engine oil provides resistance to oxidation with its high quality base oils and additives, ensures good engine cleanliness, reducing particle accumulation through efficient dispersant power, and long-term wear protection of parts, increasing engine life.
The price mentioned above is the net price(not including shipping) Introducing Aleppo Famous Laurel Soap, a traditional handmade soap with natural ingredients like Olive Oil, Bay Oil, and Water, combined with Sodium Hydroxide. It's free from artificial fragrance and dye. The soap is made in various compositions, ranging from 1% to 40% Bay Oil and 40% Laurel Oil. Al Kamal Laurel offers fast shipment of their 100% natural handmade Aleppo soap, following traditional methods. This soap, aged for at least 2 years, is a must-try for its ability to keep your skin moisturized, providing essential vitamins and minerals. Perfect for daily hand cleaning or body care, Aleppo soaps also offer long-lasting pleasant scents on your skin. The main ingredient of these soaps is olive oil, and they are entirely handmade using traditional methods. The cold production method preserves the active ingredients in the oils, ensuring no loss of quality. Aleppo soaps contain no synthetic substances. Aleppo soap, considered the ancestor of all soaps, has a rich history dating back thousands of years. Originating in the city of Aleppo, Syria, it is a natural soap produced from a mixture of olive oil and laurel oil. It's free from perfume, essence, colorant, preservative, chemical additive, or animal products. This soap is particularly effective in preventing dandruff, moisturizing and softening the skin. With rich vitamins A and E from laurel and olive oil, it nourishes and has antimicrobial properties, supporting skin strengthening and renewal. Suitable for all skin types, dermatologists recommend Aleppo soap as a hand-produced, traditionally crafted soap. The soap is made in large blocks, cut, and stamped with the manufacturer's prints. After manual cutting, the soaps are aged on shelves for at least 6 to 9 months, enhancing the quality. During this time, the soap's color transforms from olive green to dark golden yellow. Aleppo soap is ideal for skin cleansing and care, suitable for use on the face and body, even for irritated or sensitive skin. The unique combination of ingredients makes Aleppo soap a distinctive and versatile product for various skincare needs.
The price mentioned above is the net price(not including shipping) Indulge your skin with the luxurious care it deserves! Our natural laurel soap, infused with the regal aroma of royal musk, is the perfect choice for you. This soap not only deeply cleanses and purifies your skin but also enriches it with moisture and vitality, thanks to the blend of natural oils and essential oils it contains. Experience the soothing, revitalizing, and moisturizing effects that this unique mixture brings to your skin. Treat your skin to a touch of royalty with our natural laurel soap featuring the exquisite scent of royal musk!
The price mentioned above is the net price(not including shipping) This soap is called Aleppo Famous Laurel Soap, and its ingredients include Olive Oil, Laurel Oil, Water, and Sodium Hydroxide. Notably, it does not contain any Artificial Fragrance or Dye. It comes in a 165g size. Abo Hilal Laurel produces this soap using traditional methods, ensuring it's 100% natural and handmade. The soap, made with laurel oil, has undergone a minimum aging of 2 years. When used, it keeps your skin moisturized and nourished, providing essential vitamins and minerals. This Aleppo soap, made primarily from olive oil, is crafted using traditional methods to retain the active ingredients. There are no synthetic substances in it. Aleppo soap is renowned as the ancestor of all soaps and continues to be popular worldwide. Originating from the city of Aleppo in Syria over 2000 years ago, it's a natural blend of olive oil and laurel oil. Real Aleppo soap is devoid of perfume, essence, colorant, preservative, chemical additive, or animal products. It's especially effective against dandruff and suitable for people with itchy or irritated skin, such as those with allergies, psoriasis, and eczema. The soap's laurel oil and olive oil are rich in vitamins A and E, providing skin-nourishing and antimicrobial properties. It supports skin strengthening and renewal. Hand-produced in large blocks using traditional methods, Aleppo soap undergoes a manual cutting process, resulting in varying sizes. The soaps are then left to dry on shelves for at least 6 to 9 months, enhancing their quality. During this time, the color changes from olive green to dark golden yellow. This 100% natural Aleppo soap is recommended for cleansing and caring for all skin types, including the face and body. It is safe for even sensitive or irritated skin. The unique combination of olive oil and laurel oil gives Aleppo soap distinctive properties, making it suitable for various uses, and it is often recommended by dermatologists and skin experts.
The price mentioned above is the net price(not including shipping) Introducing Abu Hilal Laurel Soap, crafted from 100% natural ingredients to provide a gentle and refreshing cleansing experience for your skin. Enriched with olive oil, it helps maintain your skin's moisture balance. The inclusion of bay oil contributes antibacterial and antifungal properties, cleansing and protecting your skin. Additionally, linden tree oil aids in softening and moisturizing your skin. Abu Hilal Laurel Soap, infused with laurel and linden tree oils, not only cleanses but also soothes your skin with its delightful natural scent. Experience the rejuvenating effects of Zezafun scented soap, a unique blend of flowers and linden tree extracts. Embrace your natural beauty by ordering now!