Product introduction: HAST (Highly Accelerated Stress Test) is a type of test that is used to evaluate the reliability of electronic components and other materials under high temperatures and humidity. A HAST test chamber is a device that provides controlled conditions of high temperature and humidity to simulate the effects of aging and degradation on materials over a shorter period of time than would occur in normal use. During testing, the sample to be evaluated is placed in the HAST chamber, which is then heated to a high temperature and subjected to a high-pressure steam environment. The temperature and humidity levels are carefully controlled to ensure that the sample is subjected to the appropriate conditions. The purpose of the HAST test is to identify any weaknesses or defects in the material that may cause it to fail prematurely in real-world use. By exposing the sample to accelerated aging conditions, engineers can evaluate the long-term reliability of the material and make any necessary improvements to its design. HAST test chambers are commonly used in the development and testing of electronic components, such as integrated circuits, printed circuit boards, and semiconductor devices. They are also used in other industries where materials must be able to withstand harsh environmental conditions, such as the aerospace, automotive, and medical device industries.
How to choose the suitable Pulmonary Function Testing device Ultrasonic type is the best choice. In recent years, with the rapid development of modern electronic technology and bioengineering, Pulmonary Function Testing devices are updating continually, and they are more sophisticated and perfected gradually. Traditionally water seal Pulmonary Function Testing device, wedge Pulmonary Function Testing device,� dry rolling-seal Pulmonary Function Testing device are phrased out of market because they could not connect with electronic computers. After 2000, ultrasonic Pulmonary Function Testing devices have been used internationally to replace traditional differential pressure Pulmonary Function Testing device, turbine Pulmonary Function Testing device and thermal Pulmonary Function Testing device. The main reason is that these three principles have some limitations as below: 1. Hygiene problem: it is difficult to clean thoroughly, and there is a very high risk of cross-infection in long-term use; 2. Unable to measure lower flow; 3. Heavy reliance on gas composition and temperature; 4. Calibration and adjustment required
Cnc drilling tapping machine center base structure adopts six-point support design,which can improve rigidity and vibration resistance of the machine, and ensure good stability during the processing period. The high-speed servo tool changer is fast and stable, which can reduce the tool changing time and non-processing time. Fully enclosed shield design, backwashing with complete chip removal functions and high reliability. High-speed and high-rigidity tapping. Clamping arm tool library for quick and accurate tool replacement, suitable for small diameter drilling holes. 1.High rigidity. 2.Design of high rigid bracing structure. 3.High efficiency. 4.Direct spindle transmission system. 5.Save space. 6.The machine takes up little space. ã??ã??After various heat treatment, the precision of the machine is effectivefor a long time, and the six points support to ensure high precision displacement performance. The front knife library provides the speed of the tool replacement, which effectively improves the efficiency and reliability of production. ã??ã??Fully enclosed protective cover design, backwash and chip removal function, high reliability. Scope of application Precision parts, mobile phones, 3C products
1 Series Aluminium Sheet Introduction 1000 (brand) series aluminum alloy represents 1050, 1060, 1100. In all series, 1000 series belongs to the most aluminum series, purity can reach more than 99.00%. Because it does not contain other technical elements, the production process is relatively single, and its price is relatively cheap. It is currently one of the most commonly used series in the conventional industry. Most of the current circulation on the market is 1050 and 1060 series, 1000 series aluminum plate determine the minimum aluminum content of this series according to the last two Arabic numerals. Its characteristics are: good electrical conductivity, good corrosion resistance, good welding performance, low strength. In terms of use, it is relatively soft, mainly used to do decorative parts or interior parts, mostly used in the chemical industry and special purposes. Aluminum plate refers to the rectangular plate made of aluminum ingot rolling. It can be used for lighting decorations, solar reflective panels, architectural appearance, interior decoration, elevator, sign, automobile interior decoration, household appliances, aerospace and military aspects. Our company produces aluminum plates between 0.5 to 500 mm thick, 500 to 2200 mm wide and 500 to 9000 mm long.
American Electric Veller Features 350-watt rear hub motor Lithium-ion battery with 7 lightweight lithium cells running at 36 volts 10 amps 100% hand welded lightweight aluminum frame LED Panel for the Power Assist System (PAS) located on the handlebars with 4-speed options. 7 Speed Shimano Tourney Gears & Shifter Comes standard with a removable basket, bell, rear reflector & tool kit at no extra cost. Easy to get on and off Excellent warranty! Designed and Assembled in the USA Motor 350 Watt Rear Hub Brushless Motor Battery 36V 10AH Long-range Lithium-Ion (Removable) Charging Time 3 â?? 4 Hours Range 35 â?? 40 Miles can still be pedaled if the battery dies Display LED Panel with 4 Speed Options â?? Zero (pedal only) Derailleur 7 Speed Shimano Tourney�® Throttle Type Pedal Assist Technology Brakes Front and Rear Disk Brakes Tires 26 x 1.75 Performance Tires on Aluminum Rust-Proof Wheels Frame 100% Aluminum Very Light Weight / 18 Step-Through Forks Aria Zoom Aluminum Fork (Light Weight) Seat Comfort Cruiser Seat With Suspension Pedals Aluminum Pedals
Zetter utilizes excellent quality fabric material to ensure comfortable and durable, long-lasting usage in men's track pants, lowers, and shorts. Our manufacturing process is backed by a team of highly skilled workers, ensuring precise and accurate stitching, delivering the best value for your investment. These versatile track pants can be used as joggers or regular-fit track pants for men with zipper pockets, making them ideal for running, gym workouts, and even as comfortable sleepwear. Additionally, our manufacturing extends to tights, running shorts, yoga wear, and gym wear, catering to your diverse fitness needs. The attractive brand logo adds a stylish touch, making it appealing to everyone who seeks fashion activewear, athleisure, and sportswear. Our dedication to quality extends to fitness apparel, performance clothing, and workout gear, ensuring you get the most out of your activewear. Please refer to our Size Chart before placing your order to ensure the perfect fit. We offer easy exchanges, so you can effortlessly choose the perfect track pant or activewear that matches your preference.
This linear fitting is IP66 waterproof rating, adopts innovative knob for quick installation, easy for connecting power supply with quick terminal block, no need to use tools and screws. Adopts high brightness SMD2835 light source,opimized optical design on diffuser and flicker-free driver, which makes higher lumen output and light distribution even and soft, no glare, no flicker. It can be with sensor dimming function. Economic light solution for underground parking lots, underground passage, warehouses, stair well, long corridor, tunnel and boat application. Features High-grade aluminum heatsink and anti-UV PC housing. IP66 waterproof rating and IK10 high intensity High transmittance(88%) PC diffuser 220lm/W LED chip as the light source(approval by LM-80) high efficency,flicker free driver Surface mounted/hanging installation End cap knob type, quick wiring terminal block for easy installation sensor dimming function with remote setting (option) Linkable connection function(option) Approved by CE ROHS SAA and C-Tick (RCM). 5 years warranty.
SCR Type SiC Heating Elements Product Description SCR(SGR, SEU) type double-spiral silicon carbide heating elements are cut so as to place both electrical terminations on the same end of the element.They are supplied with the terminal assembly attached. SGR (SCR) type Torch Furnace silicon carbide design or dimensions preclude wiring from both sides of the furnace. This type is ideal for blind holes and the operating temperature can be up to 1500 deg C. it is also widely used in various high temperature electric furnaces and other electric heating debices, such as in the industrial of magnet, ceramics, powder metallurgy, glass, metallurgy and michinery etc. Features: 1, High temperature resistance, resistance to oxidation and corrosion 2, Fast heating, long life, small deformation at high temperature, easy to install and maintain 3, With automatic electronic control systems, precision constant temperature can be obtained, curve temperature control can be obtained too according to the needs of production
H Type Silicon Carbide Rod H-shaped silicon heating element is manufactured by taking two carefully-matched SiC rods and welding a thickened silicon carbide bridge. This element provides for wiring both tail ends from one side of the furnace. The tail ends of the cold ends are metallized with aluminum, which can provide a low-resistance contact surface to the aluminum connection straps and clamps. Since H-shaped silicon heating element is composed of two ED silicon heating elements sharing a cold end, it can be connected by the power cord at one end of the furnace. The surface temperature of heating part is 1500. It is mainly used in kilns with high furnace temperature and high temperature uniformity. Its characteristics are electricity saving and long service life. In addition, a furnace with an energy saving structure can be built because the number of heating element holes on the furnace can be reduced compared with the H types. These elements are widely used as high-temperature heat sources for electric furnaces and for the firing of ceramic capacitors, ferrites and other electronic components.
Applications The bell-type sintering furnace is a high-temperature sintering furnace for cyclic operation, with a shear screw lifting system for the lifting of the firing table. It can be used for intermittent production sintering process of ceramic products such as zirconia, alumina and dielectric ceramics. Features 1. maximum temperature of 1500C and 1650C (two models of temperature are available); 2. Special riveted structure is chosen for the furnace chamber fixing, no cracking and collapse of the top for long-term use. 3. Linear guide design, smooth movement without jitter, loading and unloading products is extremely convenient and safe. 4. Pre-embedded corundum mullite at the bottom of the bearing plate to enhance support, to prevent the bearing plate from sinking and sinking. 5. Multi-stage programmed temperature control, PID adjustment, to meet the sintering requirements of multiple multi-stage process curve storage 6. Over-temperature protection function, over-temperature automatic power off. 7. High precision B-type thermocouple, accurate temperature measurement 8. Heating element is U-type silicon molybdenum rod MOSI2 9. Additional option: tail gas treatment combustion cracking device
Applications FMJ series high temperature chamber furnace adopts vacuum adsorption ceramic fiber chamber, multi-layer insulation material heat insulation, fast temperature rise, strong resistance to thermal shock, extremely low surface temperature, MOSI2 heating element, long service life, professional fixture to fix the heating element, easy disassembly. There are desktop and floor structure for different applications in ultra-high temperature, stable control, uniform temperature difference, good repeatability, very suitable for ultra-high temperature use environment of universities, research units laboratory. Features 1. Working temperature 1000 1600 and 1000 1700 2. Intelligent programmable temperature control instrument can edit, store and call multi-segment program. 3. Over-temperature protection function, when the temperature exceeds the allowable setting value automatically power off. 4. Safety protection when the furnace body leakage automatic power off. 5. Double-layer furnace shell air-cooled structure, low surface temperature. 6. LED high strength anti-destructive all stainless steel button, durable. 7. B-type thermocouple, accurate temperature control 8. Heating element for U-type silicon molybdenum rod MOSI2 Additional options Exhaust, air intake system, movable platform.
This linear fitting is IP66 waterproof rating, adopts innovative knob for quick installation, easy for connecting power supply with quick terminal block, no need to use tools and screws. Adopts high brightness SMD2835 light source,opimized optical design on diffuser and flicker-free driver, which makes higher lumen output and light distribution even and soft, no glare, no flicker. It can be with sensor dimming function. Economic light solution for underground parking lots, underground passage, warehouses, stair well, long corridor, tunnel and boat application. Features High-grade aluminum heatsink and anti-UV PC housing. IP66 waterproof rating and IK10 high intensity High transmittance(88%) PC diffuser 220lm/W LED chip as the light source(approval by LM-80) high efficency,flicker free driver Surface mounted/hanging installation End cap knob type, quick wiring terminal block for easy installation sensor dimming function with remote setting (option) Linkable connection function(option) Approved by CE ROHS SAA and C-Tick (RCM). 5 years warranty.
This linear fitting is IP66 waterproof rating, adopts innovative knob for quick installation, easy for connecting power supply with quick terminal block, no need to use tools and screws. Adopts high brightness SMD2835 light source,opimized optical design on diffuser and flicker-free driver, which makes higher lumen output and light distribution even and soft, no glare, no flicker. It can be with sensor dimming function. Economic light solution for underground parking lots, underground passage, warehouses, stair well, long corridor, tunnel and boat application. Features High-grade aluminum heatsink and anti-UV PC housing. IP66 waterproof rating and IK10 high intensity High transmittance(88%) PC diffuser 210lm/W LED chip as the light source(approval by LM-80) high efficency,flicker free driver Surface mounted/hanging installation End cap knob type, quick wiring terminal block for easy installation sensor dimming function with remote setting (option) Linkable connection function(option) Approved by CE ROHS SAA and C-Tick (RCM). 5 years warranty.
This linear fitting is IP66 waterproof rating adopts innovative knob for quick installation easy for connecting power supply with quick terminal block no need to use tools and screws Adopts high brightness SMD2835 light sourceopimized optical design on diffuser and flickerfree driver which makes higher lumen output and light distribution even and soft no glare no flicker It can be with sensor dimming function Economic light solution for underground parking lots underground passage warehouses stair well long corridor tunnel and boat application Features Highgrade aluminum heatsink and antiUV PC housing IP66 waterproof rating and IK10 high intensity High transmittance88 PC diffuser 210lmW LED chip as the light sourceapproval by LM80 high efficencyflicker free driver Surface mountedhanging installation End cap knob type quick wiring terminal block for easy installation sensor dimming function with remote setting option Linkable connection functionoption Approved by CE ROHS SAA and CTick RCM 5 years warranty
Shimlared Tomato Puree- the secret to elevating your dishes to a whole new level while saving time and effort in the kitchen. Our puree is made from fresh, hand-picked tomatoes that are chopped, sieved, and thermally processed leaving you with a creamy, seedless, and skinless texture thatâ??s perfect for curries, soups, and more. And did you know that in just 2 tablespoons of our tomato puree, you can enjoy the flavor and goodness of 1 medium-sized tomato, further also saving you the hassle of blanching and grinding? While cooking, simply add 6 tablespoons of puree to 90-100 ml of water to get a gravy equal to that of 3 medium-sized tomatoes (180-200 ml). Its concentrated form means that a little goes a long way, making it a convenient and cost-effective alternative to using fresh tomatoes. Plus, our puree is free from preservatives and artificial additives, ensuring that you get only the best, most natural flavor in your dishes. Whether you are a professional chef or a home cook, ShimlaRed tomato puree is the perfect ingredient to take your recipes to the next level. Try it today and discover the true taste of sun-ripened tomatoes in every dish!
Mimaki CE4 Printhead Assy - M008386 Product Specifications Technology: Multi-drop grayscale micro-piezo Grayscale levels: 16 Active nozzles: 318 Print swathe width: 53.6 mm Nozzle pitch: 169 �¼m Native resolution: 150 dpi Printhead weight: 148 g Dimensions: 85 x 70 x 23 mm Drop volume: 6 - 90 pl Typical firing frequency: 2.8 - 28 kHz Ink Compatibility: oil-based pigment ink and UV curable pigment ink Manufacturer: Mimaki Printer compatibility: Mimaki UJV-160 / JFX / UJF DP part number : PPHMI7917 This Printhead Assy is suitable for the Mimaki UJV-160 / JFX / UJF Printers. This is the original Mimaki part (number M008386). It includes the metallic support for fixation. The same printhead without the metallic support is sold as part number KX-CE308644CS-CE4. The cables are 40.9cm long, 2.1cm wide and have 20 pins.
In the field of biodiversity conservation and agricultural research, the proper preservation of plant samples is crucial. As an efficient device for cryogenic storage, KGSQ liquid nitrogen tanks provide a stable and safe cryogenic storage environment for plant samples, livestock frozen essence, scientific research, medical and biological samples, ensuring the activity and genetic stability of the samples. Diverse model selection KGSQ liquid nitrogen tanks offer a variety of models to meet storage solutions of different scales and needs. Small 6-liter, 10-liter and 15-liter tanks are suitable for storing plant samples or transporting small amounts of liquid nitrogen for a short period of time. For users who need larger capacity, we provide 30-liter and 35-liter medium-sized liquid nitrogen tanks, 65-liter, 95-liter, 115-liter, 145-liter, 175-liter and other large-sized liquid nitrogen tanks commonly used in scientific research experiments, as well as 350-1800-liter intelligent gas phase cryogenic tanks, the latter of which is particularly suitable for long-term storage of large quantities of samples. Vacuum insulation technology KGSQ liquid nitrogen tank adopts advanced vacuum insulation technology, combined with glass fiber reinforced plastic neck tube and special material cover plug design, effectively blocking heat transfer, reducing liquid nitrogen volatilization, and ensuring that plant samples are safely and effectively protected at low temperatures of -196�°C. At the same time, the vacuum warranty of KGSQ liquid nitrogen tank is up to 5 years, and its excellent insulation performance and stable storage conditions provide a reliable protective barrier for plant samples. High-strength material and multi-layer vacuum interlayer Our liquid nitrogen tank is made of high-strength aviation aluminum material, combined with multi-layer vacuum interlayer design, which not only improves the durability of the tank, but also realizes long-term cryogenic storage of plant samples. Whether it is pollen, callus, somatic embryos, or seeds, in vitro meristems and dormant buds, they can maintain their activity and genetic stability in liquid nitrogen tanks. Easy to operate, safe and reliable KGSQ liquid nitrogen tanks are equipped with accessories such as liquid nitrogen pumps, trolleys or intelligent liquid level monitors, making the storage and access of plant samples safer and more convenient. The intelligent monitoring system can replenish liquid nitrogen in time to avoid oxidation and cell resuscitation, ensuring the safe storage of samples. Choose KGSQ liquid nitrogen tank to provide a safe, stable and efficient storage environment for your plant samples. Our liquid nitrogen tanks are not only technologically advanced, but also demonstrate a deep understanding of user needs in detail.
spraying for mice and mint oil for mice best rat repellent for cars top rated mosquito repellent natural way to deter mice Rodent Repellent Cream Say goodbye to pesky rodents with Twobrosrepellent Rodent Repellent Cream. Made with high-purity natural plant extracts, our all-natural formula contains a blend of effective essential oils that repel rodents both indoors and outdoors. Its long-lasting scent prevents rats, mice, and other rodents from chewing on wires and nesting in your car engine or any other enclosed space. Easy to apply with its solid adhesive bottom pad, our cream is safe for people, pets, plants, and the environment. Trust Twobrosrepellent to keep your space rodent-free! Features of Natural Rodent Repellent Cream Are you tired of rodents chewing on your car engine wires and nesting inside your vehicle? Look no further than Twobrosrepellent Mouse Repellent Cream! Our all-natural, high-purity plant extract formula contains a blend of effective essential oils, including peppermint and corn cobs, that deliver a long-lasting scent to deter mice and prevent rats, mice, and other rodents from chewing on wires and nesting in your car engine. Our rodent repellent cream has been tested in thousands of experiments, and the results speak for themselves. It effectively repels rodents both indoors and outdoors for up to 30-60 days. Whether you're looking to protect your RV, garden, bedroom, hotel, restaurant, office, warehouse, basement, kitchen, decking, attic, or trash can, Twobrosrepellent Mouse Repellent Cream has got you covered. Our upgraded product is specially developed for car rodent repellent and can be placed under the car engine to effectively prevent rodents from destroying the car. The product can also be used in other places where rodents are a problem. Our natural way to deter mice repellent is easy to apply with its solid adhesive bottom pad. Simply stick it to a clean spot in your engine compartment or any enclosed area to get rid of rodents. It takes up little space and stays in place even when driving.
K-LFP48100S is a new type of intelligent battery pack developed by KODU Technology, with built-in cell balance, and a smart monitoring system. It is suitable for the installation of 19-inch cabinets. Intelligent design: intelligent detection, SOC&SOH management, simplified O&M, and self-management. Intelligent collaboration: With the intelligent power system to realize intelligent features (such as intelligent voltage boosting and intelligent hybrid use). Intelligent anti-theft design:Intelligent software lock, displacement lock, and buzzer alarm. High reliability design: integrated BMS design, long service life. Multiple lithium batteries are used in parallel to meet the application requirements of large-capacity sites; Support remote power supply, constant voltage 57V discharge; Energy storage - peak cutting and valley filling; K-LFP48100S has high-energy density, redundant safety design, long life, light weight, easy installation, maintenance-free, remote monitoring Nominal voltage 48V Nominal capacity(25 ,0.5C) 100Ah Nominal energy 25 ,0.5C 4800Wh Weight 40±0.3Kg Cell-positive material LiFePO4 Combination mode 15S1P Dimensions (W * D * H) 443mm*400mm*135.5mm Communication interface RS485&CAN; 2 dry contacts IP rating IP20 Shell material Steel plate baking varnish Cycle life(0.5C, 25 ) 6000 times @80% DOD Design life(25 ) 15 years LED Display Alarm/Run/SOC Electrical parameter Operating voltage 42V-57.6V Maximum charging current (25 ) 100A Maximum discharging current (25 ) 100A Standard charging current (25 ) 50A Standard discharging current (25 ) 50A Recommended charging voltage 54V Discharge cut-off voltage 42V Battery input protection BMS Efficiency 98% Self discharge (25 ) Less than 5% after 90 days storage Internal resistance 40m�© Maximum number of parallels 32 Protection function Overvoltage protection, overcurrent protection, low-voltage protection, over temperature protection, low temperature protection, reverse connection protection, short circuit protection Environment Charging temperature-40~60 (Optional heating film) 0~60 Discharging temperature-20~60 Storage temperature-10 ~45 Relative humidity 5%~95%(non condensing
The transportable YDS liquid nitrogen tank is a small and economical liquid nitrogen biocontainer, made of high strength aerospace aluminium with multiple fixed support structures, which not only ensures the safe transport of the tank, but also reduces the volatility of liquid nitrogen. With such characteristics, it occupies its own place in the long and short distance transport of biological samples! Today, we are focusing on the advantages and features of the TIANCHI transportable liquid nitrogen tanks, which are the key to efficient sample transfer in research, medical and animal husbandry. Details are as follows: 1. Diverse volume options TIANCHI transportable liquid nitrogen tanks offer a wide range of volume options, namely 10B/15B/20B/30B/35B/50B, ranging from small economical tanks to larger sample transfer tanks. For example, popular models such as the YDS 30B have a geometric volume of 31.5 litres and a small 50mm diameter. This design not only ensures the storage of a large number of samples, but also avoids excessive loss of liquid nitrogen during dynamic transport. 2. Special vibration resistant structure for transport The design of TIANCHI transportable liquid nitrogen tanks takes into full consideration the safety and stability during transport. They are equipped with a special antivibration structure to ensure the safety of liquid nitrogen and biological samples inside the tanks, even under long distance transport or adverse road conditions. 3. High-vacuum multi layer insulation design TIANCHI liquid nitrogen tanks are equipped with high vacuum multi layer insulation technology and a 5 years vacuum warranty, which significantly reduces the daily evaporation rate of liquid nitrogen and prolongs the service life of liquid nitrogen. This also means that the temperature inside the tank remains stable even during transport, providing a near perfect cryogenic storage environment for the samples. Easy to operate and maintain TIANCHI liquid nitrogen tanks are designed to be user friendly and easy to operate. Whether it is cleaning the tank, filling it with liquid nitrogen or accessing the samples, the user can do it easily. In addition, TIANCHI is a factory direct distributor and can provide detailed operation manuals and professional customer service to ensure that users have no worries in the process of using the tanks. By choosing TIANCHI transportable liquid nitrogen tanks, you will get a cryogenic storage and transport solution with the right volume, safety and reliability, and easy operation. Whether in research laboratories, medical units or animal husbandry, TIANCHI liquid nitrogen tanks will provide safety and security for your valuable assets.
