Double Side Rail Hole Chamfering Kit The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long. Specification Model LJ-DJQ-S Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) 40*15 cm Chamfer Diameter �?31-�?32 Chamfering Size 1�?45�°, 2.5�?45�° Application 43kg/m,50kg/m,60kg/m rail Weight 2.8KG
Double Side Rail Hole Chamfering Kit The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long. Specification Model LJ-DJQ-S Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) 40*15 cm Chamfer Diameter 31-?32 Chamfering Size 145°, 2.5 45° Application 43kg/m,50kg/m,60kg/m rail Weight 2.8KG
Raw Material Specifications: Raw Material Coir Fibre Pith (coconut coir/ coco peat/coir fibre dust) Sieving 1/4 Inch. Drying Sun drying and sterilization Moisture content 18% below pH 5.5 to 6.8 Electrical Conductivity 600 Micro S/Cm. Maximum Product Specifications: Weight 650grms. +/- 50 grams Size 20 x10 x 5.5 cm +/- 0.5cm. Compression Ratio 8: 1 After Expansion Wet Volume 8 - 9 liters. Wrapping Individually wrapped or naked Packing 1) 2200 nos. Bricks stacked in a pallet after stretch wrapped poly strapped. 2) Cartonized and palletized 72 boxes per pallet 24 pcs per box Loading Capacity in a 40 ft HC container A) Pallet - 1) 20 nos Pallet = 26.0 MT 2) 20 nos Pallet = 22.4 MT (34560 Briquettes) 20 ft Container B) Pallet - 1) 10 nos Pallet = 13.0 MT.(2000 briquettes per pallet) 2) 10 Pallets = 17280 briquettes (24 nos x 72 boxes per pallet) ** Can be customized to customer requirement.
Engine Number/Position of Cylinders: Single Cylinder Engine Capacity: 155cc Bore x Stroke: 58.0 mm x 58.7 mm Compression Ratio: 11.6 : 1 Maximum Power: 11.3 kW / 8000 rpm Maximum Torque: 13.9Nm / 6500rpm Starter System: Electric Starter Lubrication System: Wet Engine Oil Capacity: Total â?? 1.00 L ; Regular 0.90 L Fuel System: FI (Fuel Injection) Clutch Type: Dry, Centrifugal Automatic Transmission Type: V-belt Automatic Engine Type: Liquid cooled 4-stroke, SOHC FRAME Front Brake: Disc Rear Tire: 140/70-14M/C 62P Rear Brake: Drum Frame Type: Underbone Front Suspension: Telescopic Rear Suspension: Unit Swing Front Tire: 110/80-14M/C 53P DIMENSION Length x Width x Height: 1980mm x 700mm x 1150mm Wheelbase: 1350mm Ground Clearance: 143mm Seat Height: 790mm Curb Weight: 125 kg (ABS Version), 122 kg (Standard Version) Fuel Tank Capacity: 5.5 liters ELECTRICITY Ignition System: TCI Battery: YTZ7V (ABS Version), NTZ6V (Standard Version) Spark Plug Type: NGK/CPR8EA-9
Product Description AG35 is an ultra-thin aerogel felt based on Preoxidized filament fiber felt. Despite its thin thickness, it possesses an exceptionally low thermal conductivity. It is particularly suitable for insulation and fire protection in applications such as power batteries, automobiles, firefighting suits, or small spaces with insulation requirements. Typical Applications: Fire insulation for power batteries Thermal insulation for vehicle bodies, including automobiles and subway trains Special electrical equipment Product Advantages Outstanding insulation performance: With an ultra-low thermal conductivity, it achieves equivalent insulation results while being only one-fourth the thickness of traditional materials. Excellent fire resistance: The unique raw materials and production processes of this product ensure excellent resistance to flame impact. Superb physical strength: It possesses strong structural integrity and exhibits excellent tensile and compressive strength among lightweight insulation materials. Ultra-thin thickness: Multiple ultra-thin thickness options are available for selection.
Product Description Specifications Quarter Package: Improved Nylon with Revel CX Technology Excellent support and stability, ideal for the beginner or casual player CX Tech provides enhanced comfort and performance through its compression molding process Heat moldable for a custom fit and reduced break-in time Flexible tendon guard, forward boot rake (or lean) and toe spring all help promote the ideal roller hockey stride Liner: Comfortable brushed Nylex that also wicks away moisture Tongue Construction: Two-piece, Vented Pro Felt Thick design protects the top of the foot from impacts and lace-bite Ventilated center to promote consistent airflow Outsole: Embossed PVC Plastic Delivers a perfect balance of lateral support and forgiveness Frame: Two-Piece Alkali Rize Aluminum Chassis Larger rear wheels with smaller front wheels increase agility without compromising top-end speed Sizes 1.0-3.0 /(2) 59mm in the front and (2) 68mm in the rear Sizes 4.0-5.0 /(2) 68mm in the front and (2) 72mm in the rear Sizes 6.0-13.0 /(2) 76mm in the front and (2) 80mm in the rear Square Flush 6mm Axles Wheels: Alkali Cerberus 74A Indoor Wheels Single-pour construction Bearings: ABEC 7 608 Bearings Skate Width: D Weight: TBD
Material Polyester / Cotton / cotton mix polyester / other Sleeve Style Short sleeve Pattern Type Solid 7 days sample order lead time Support Other attributes Place of Origin Bangladesh Feature Anti-wrinkle, QUICK DRY, Compressed, Anti-pilling, Breathable, Sustainable, Anti-Shrink, EL Flashing, Contrast Trim Technics Printed Gender Men Style Casual Fabric Type Jersey Weaving method knitted Brand Name Customise Model Number Customise Collar O-Neck Fabric Weight 120-280 grams, etc Design Blank Product name T Shirt Keywords T Shirt Custom,wholesale,men's t-shirt fabric cotton, polyester, cotton mix polyester, etc weight 120-280 grams, etc Service Fast Delivery Printing Custom Designs Print Logo Customized Logo Printing Type Man Short T Shirt Gender UNISEX MEN WOMEN Feature Plus Size Packaging and delivery Packaging Details Packing Details: 1 pair/OPP bag,100 pieces /CTN Port Any Port of Bangladesh Supply Ability Supply Ability 1000000 Piece/Pieces per Year
This Industrial Grade Compressor is a powerful and reliable solution for various industrial applications. Designed for heavy-duty use, this air compressor delivers optimum air pressure and efficiency. Powerful Performance: With a 2HP motor, this air compressor generates ample power to handle demanding tasks, providing a steady and continuous supply of compressed air. Large Air Tank: The generously sized 140-liter tank ensures an extended operation time, reducing the need for frequent refilling and improving overall productivity. Sturdy Construction: Built with industrial-grade materials, this air compressor is durable and designed to withstand rugged working conditions, ensuring long-lasting performance. User-Friendly Controls: The air compressor is equipped with easy-to-use controls and gauges, allowing operators to monitor the pressure and adjust settings effortlessly. Safety Features: The compressor is equipped with safety measures to prevent overheating and overpressure, ensuring safe and reliable operation. Versatile Applications: Whether it's powering pneumatic tools, inflating tires, or running air-powered machinery, this air compressor is capable of handling a wide range of tasks. Model No. BS-875 Power 2 HP, Single Phase Tank Capacity 150 Liters Max Pressure 8 Kg/cm2 / 120 PSI Air Delivery 8.2 CFM Motor Speed 1440 RPM Dimensions 940 x 432 x 1220 mm Weight 62 Kg
High-Quality 25 Kg Loose Coco Coir and Coco Substrate Mix Bales for US Buyers,Soil producers. Berri Coco Mix 25 kg Bales are Less Compressed Mix. Products are application centric designed for specific usage. We at BERRI COIR SUBSTRATE guarantee promised expansion and EC for our products. These coir mixes are compacted in a ratio of 2:1, which can be easily filled and used in the grower. These are very easy to break. This potting mix is mixed and compacted according to the needs of the customer and the crop! 1 BERRI B25 BULK SUBSTRATES / 25 KG BALE 1. BERRI BULK SUBSTRATES / 25 KG BALE MIXING : COIR 70% +CHIPS 25 % + FIBER 3%+ COCO CRUSH 2% WHC: 6.75 Lt/ KG AIR PORACITY: 10.1 % 2. BERRI B50 BULK SUBSTRATES / 25 KG BALE MIXING : COIR 45 % +CHIPS 50 % % + FIBER 3% +COCO CRUSH 2% WHC: 5.75 Lt/ KG AIR PORACITY: 22.1 % 3. BERRI BR 20 BULK SUBSTRATES / 25 KG BALE MIXING : COIR 50 % +CHIPS 25 % + FIBER 3% +COCO CRUSH 2%+ RICE HULLS 20% WHC: 6.45 Lt/ KG AIR PORACITY: 22.9 %
Modular cantilevered structure. Single or double color cream filling. Version with one or more cream pumps. â?? The double-walled cream tank and cream pipes with water jackets allow uniform tempering of the cream. To adapt to the production environments of different temperatures. Cleaning of chain pushers with brush and compressed air jet during machine operation. No biscuit No Creamâ?? systemï¼?and the cream supply automatically restores when there are biscuits. Accurate filling: The cream is applied precisely and uniformly, even when starting and stopping the machine. Equipped with pressure sensor, when the air pressure is insufficient or no air pressure, the machine will alarm and stop running. Easy detachable waste collection tray for convenient cleaning and maintenance. Flexible: capable of producing 3 + 2 sandwich biscuits (2 layers of cream) or 2 + 1 sandwich biscuits (1 layer of cream). Shape: round, square, rectangle or any other special shape. Standard product size range is from 35 mm to 65 mm.
Cocopeat blocks are considered an ideal growing medium. The cocopeat powder thus obtained is sieved, washed, dried and finally compressed into blocks. The blocks can be used for a wide range of planting requirements. Coir is known for its natural rooting hormones and anti-fungal properties. We also ensure secure packaging of the cocopeat blocks. The blocks are stretch wrapped and strapped. We also customise the packing on client request. Normally products come from 650g bricks and to 5kg and blocks. We are the manufacturers and suppliers of Coco peat, husk chips, Coco peat bricks and blocks. MAIN FEATURES are Anti-fungal Promotes natural rooting Ideal growing medium Ideal potting compost SPECIFICATIONS OF COCOPEAT BLOCK Coco Peat Particle size Electrical conductivity (1:1.5 test) Particle size Moisture Uses Grade fine less than 5mm less than 0.5mS/cm 5.8-6.8 18-22% Seed raising, green house hydroponics growing, for salt sensitive plants and horticultural potting mixes. Grade Standard less than 8mm less than 0.5mS/cm 5.8-6.8 15-20% Seed raising substrates, mushroom grow medium-mix and special potting mixes.
STEEL PDC BIT The drill body of the Steel PDC Bit is made of a whole piece of alloy steel by machining, and the cutting teeth are made by welding the composite piece on the tungsten carbide material tooth post, and then the cutting teeth are inlaid on the drill body, and the diameter-preserving part is also inlaid with diamond blocks or other wear-resistant materials on the drill body. Steel PDC bit is suitable for fast drilling in the stratum which is easy to drill at the bottom of the compressive strength without gravel, and it has a wide flow channel also in the timely transportation of rock brow. Click to learn more about pdc bit manufacturers. Different Types Of Steel PDC Bit For Sale Steel PDC Drill Bit Steel PDC bits are mainly used in difficult to drill formations with high gravel and compressive strength. Features Of Steel PDC Bit Design: The Steel PDC bit is a one-piece design, ensuring stability at higher drilling speeds and resistance to lateral loads. Performance: Utilizing the PDC composite's cutting action, it achieves low torque, excellent stability, and high drilling speeds, especially under minimal pressure. Durability & Application: Steel PDC bits are wear-resistant, ideal for abrasive formations and deep-well operations. Advantages Of Steel Body Over Matrix Body PDC Bits Composition: The Steel PDC Bit by Top Tool is meticulously crafted from medium carbon steel, with its cutting teeth pressure-fitted onto the crown. Surface treatments like tungsten carbide spray heighten its erosion resistance. Features: Distinctively, Steel Body Bits have an expansive chip flute area, elevated flank height, and a slimmer flank thickness, positioning them ahead of tire body bits. Top Tool's Advanced Design: Top Tool's pcd drill bits are enhanced with a tungsten carbide layer, amplifying wear resistance and optimizing hydraulic performance, especially in soft strata. This design amalgamates the advantages of various bits, ensuring superior drilling speed. As a pdc bit company, we will do our best to meet all the needs of customers. Now the price of wholesale drill bit is affordable, anything you need, please contact us.
We use the most advanced anti-corrosion efficient ultra-fine fiber coagulation material as the filter body, so that the compressor output air 3m above the solid particles can be all filtered, and very little about 0.01-m oil and water dissolved in the filter When the condensate into a larger oil droplets, accumulated in the bottom of the filter, and then through the bottom of the filter tank back to the siphon pump back to the lubrication system so that the compressor discharge more pure, oil-free compressed air. Technical Parameters 1. Filtration efficiency 99.999% 2. Service life 3500-5200 hours 3. Filtration accuracy: 0.1�¼s 4. Filter material used US HV company glass fiber 5. Compressed air oil content can reach 3ppm or less We also supply other replacement brands air compressor filter: Atlas Copco air compressor filter element Ingersoll Rand air compressor filter element Fusheng air compressor filter element SULLAIR air compressor filter element CompAir air compressor filter element LIUTECH air compressor filter element Screw air compressor Pipe line filter element isused to filter different dismissal of stainless dry stock,corrosion resistance, superior structural performance; seam welded for extra strength, low resistanceto flow. Different accuracy levels of different filter structure,a new "matrix blended fiber" media, larger effective surface area, improves capurerate, enhanced filtering effect. Coated closed cell foam sleeve with resists chemical attack from oils and acids, ensures high efficiencies by preventing reentrainment of coalesced liquids. Advantages: 1.Duarbility and longevity 2.Beautiful design 3.High quality with reasonable price 4.Afford good service 5.Produce according to your sample or drawing 6.Each product individually tested Features: 1.Type:Precision Filter, Filter 2.Filter material: imported fiberglass, filter felt 3.Filter accuracy: 0.01um 4.Application: air compressor 5.Weight:0.5kgs 6.service time:8~12 months 7.sealing material:NBR, VITON 8.Oil content:0.003ppm 9.Flow rate:5Nm³/min
Rare earth samarium cobalt magnets, shorted as SmCo rectangular magnet, are a type of powerful permanent magnet made from the basic elements samarium and cobalt and other metal rare earth materials by mixing, melting, grinding, pressing and sintering. They come in various sizes and shapes, like disc,bar, ring, arc,block, etc.,. Similar to neodymium strong magnets, they belong to the rare earth magnet category, and tcan be classified as SmCo5 and Sm2Co17 according the composition ratios of samarium and cobalt. In comparison to neodymium rare earth magnets, although samarium cobalt magnets may not have as strong magnetic force, they possess two distinct advantages. Firstly, they operate effectively within a higher temperature range, and secondly, they exhibit greater resistance to corrosion. Due to these characteristics, large smco block magnets are commonly employed in applications that demand high operating temperatures, such as generators, pump couplings, sensors, electric motors, marine applications, as well as in the automotive, racing, aerospace, military, and food and manufacturing industries. SmCo rare earth magnets not only perform well at high temperatures but also maintain their magnetic properties even in temperatures below absolute zero (-273 degrees Celsius), making them popular for use in low-temperature applications.
Introduce: Bridge Crane When you choose JULI as your bridge crane manufacturer, you can trust us to deliver reliable, efficient, and cost-effective solutions that meet your needs and exceed your expectations. Bridge crane manufacturer-JULI: Product category: This crane includes box-type bridge, large cart traveling mechanism, small cart and electrical equipment. This series of cranes adopt advanced electromotor, speed reduction gear and brake, which are produced by specialised manufacturers, as a result of which made standardization and generalization of all parts. Usage: JLQ-10 Series Bridge Crane with Hook is widely used in factories, workshop and warehouse, etc, for the general loading, unloading, lifting and transportation indoor or outdoor fixed span. To guarantee safety, lifting mechanism is equipped with weight limiter and height limiter. Travelling mechanism uses polyurethane buffer with long stroke and small buffer force. Driver's cab is comfortable with broad vision. which makes the operation of the crane easier. The crane is equipped with maintenance suspending cage, convenient for the maintenance of large cart integrator.
Crane rail pad MK2 Crane rail pad is located between a rail and the steel soleplate which improves the performance of crane rails.Cranes apply high forces to the structures on which they are mounted.The MK5 pad significantly reduces the stress between the rail and its support. The CRANE pad is one of the three key ingredients in achieving a reliable track. Rail pad should be narrower than the rail it is supporting (nominally 5mm). The pad is normally supplied in 12 meter lengths. The flutes of the pad are placed facing upwards. The pad may be cut to precise length of rail. It can be cut with a hacksaw or jigsaw. No installed length of pad should be less than the spacing between three pairs of crane rail fixing clips. Before installing Mark 2 pad, the supporting area should be clean and free of oil, grease or any projections likely to damage the pad. It is preferable that the steel structure below the pad is not painted. If the rail is to be welded the pad should be protected from excessive heat during welding by being removed under the weld or by being protected with a thermal barrier. Our technical department will be pleased to advise on the suitability of Mark 2 pad in specific installation conditions.
NCM-5.1 Rail Switch Grinding Machine NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head. Specification Model NCM-5.1 Type Rail Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 2100*1120*1030mm Engine Honda GX270 Petrol engine Rated power 5.1kW Grinding wheel speed 3600r/min Grinding wheel feeding stroke 80mm Feed adjustment accuracy l0mm Grinding wheel rotation angle 30° Weight 117kg
Crane rail pad MK2 Crane rail pad is located between a rail and the steel soleplate which improves the performance of crane rails.Cranes apply high forces to the structures on which they are mounted.The MK5 pad significantly reduces the stress between the rail and its support. The CRANE pad is one of the three key ingredients in achieving a reliable track. Rail pad should be narrower than the rail it is supporting (nominally 5mm). The pad is normally supplied in 12 meter lengths. The flutes of the pad are placed facing upwards. The pad may be cut to precise length of rail. It can be cut with a hacksaw or jigsaw. No installed length of pad should be less than the spacing between three pairs of crane rail fixing clips. Before installing Mark 2 pad, the supporting area should be clean and free of oil, grease or any projections likely to damage the pad. It is preferable that the steel structure below the pad is not painted. If the rail is to be welded the pad should be protected from excessive heat during welding by being removed under the weld or by being protected with a thermal barrier. Our technical department will be pleased to advise on the suitability of Mark 2 pad in specific installation conditions.
High Carbon Alloy Steel Roller Screws By Lathe Milling Machine Benefits Most compact solution for high-force linear motion Best-in-class reliability and lifetime Low operating noise, high speed, and acceleration capability Easily customized design for easy integration Features Planetary type for highest speed and load capacity Inverted planetary type for compactness, direct drive, and easy sealing Recirculating type for highest resolution (down to 1 mm lead) and stiffness Backlash-free or preloaded execution on request A variety of industries use custom roller screws from PMP for their linear actuators and drive mechanisms. Our roller screws allow machine builders to design the most compact, powerful, and reliable linear motion systems. PMP is a pioneer in this field and offers the market's largest range of high-performance roller screws. Thanks to their high precision and rigidity, roller screws are the ideal choice for heavy loads, long-duty cycles, high speeds, high accelerations, and harsh operating conditions. Please get in touch with us for more information on how to custom our ball and roller screws product range!
The sludge dewatering machine produced by Apoaqua follows the principles of force and water in the same direction, thin layer dewatering, appropriate pressure and extended dehydration path in its dehydration mechanism. It solves the technical problems of previous generations of sludge dewatering machines, such as easy clogging, inability to process low-concentration wastewater sludge and oily sludge, high energy consumption, and complex operation, and achieves the goal of efficient and energy-saving dewatering. Apoaqua sludge dewatering system includes: fully automatic control cabinet, flocculation conditioning tank, sludge concentration and dewatering body and liquid collecting tank. It can realize efficient flocculation and continuously complete wastewater sludge concentration and squeezing dewatering under fully automatic operation, and finally return or discharge the collected filtrate. In order to meet the special needs of users in related industries, Apoaqua's sludge dewatering machine has the advantages of low-speed operation, self-cleaning, no clogging and low energy consumption. We continuously tailor targeted industry-specific solutions for users in various industries, including sludge dewatering equipment for industries such as petrochemical, papermaking, starch protein, chemical pharmaceuticals, blue algae, inorganic materials and pectin processing.