Accessible lift is a mechanical device that is designed specifically to transport a wheelchair or motorized scooter and individual from one floor to another. This allows wheelchair users the opportunity to move freely within a multi-floored building while taking the wheelchair with them so they are fully independent between floors. Accessible lift is divided into two types according to material, which Spray type and Stainless Steel type. Characterized by novel design, perfect stability and safety, nice appearance, low noise and so on, with 1.0-12.0m working range, 150-300kg carrying capacity. Ideal for indoor and outdoor applications. Non-pit installation, directly fixed to concrete floor (the concrete floor below the platform shall not be lower than the ground). Prices are determined by the heights of the lift and the type of material used. Parameters Model HTVL Capacity 250kg Platform size 1200MM* 900MM (Can be customized) Lifting height 3000mm Dimensions 1200*1260*3800mm Drive mode Hydraulic Configuration Open through or front and side entrances Speed 0.06m/s Control voltage 24V/DC Power Output 2.2KW/220V or as your local voltage Power Input 220v/50hz or as your local voltage Control Mode Inching Switch or Automatic Drive Control Self-resetting system Material of Platform Checkered slip-proof steel plate ,surface stainless steel Painting Stainless steel Operation Panel Polished aluminum alloy Safety Wane Working Range 75 Working Condition Both indoors and outdoors Working temperature From -10~ 60C Installation Non-pit installation, directly fixed to concrete floorï¼?the concrete floor below the platform shall not be lower than the ground Control Device Calling box (installed on the wall nearby) and remote controller(Extra optional) Emergency Stop The lifting and lowering process can be stopped immediately by pressing the emergency button. Safety Devices: 1.Safety Interlock:Lock the platform when it is out of control 2.Safety Sensor: The operation must be stopped immediately the safety edge meets obstacles during operation. 3.Emergency lowering: Rolling screw rod. 4.Auto-flap:Turn up after lifting
Product Description Application range of Belt Conveyor Belt conveyors can be widely used in coal, mining , metallurgical , ports and wharf, chemical, petroleum and mechanical industry, to transport various kinds of bulk materials and mass materials. Bulk material such as coal,lime stone,irono ore and clean coal,etc,. Different Industries Application General Technical Parameter Belt speed (m/s) Belt width (mm) 500 650 800 1000 1200 1400 1600 1800 2000 2200 2400 Conveying capacity (T/H) 0.80 69 127 198 324 1.00 87 159 248 405 593 825 1.25 108 198 310 507 742 1032 1.60 139 254 397 649 951 1321 2.00 174 318 496 811 1188 1652 2186 2795 3470 2.50 217 397 620 1014 1486 2065 2733 3494 4338 3.15 871 1278 1872 2602 3444 4403 5466 6843 8289 4.00 1622 2377 3304 4373 5591 6941 8690 10526 4.50 2674 3718 4920 6291 7808 9776 11842 5.00 2971 4130 5466 6989 8676 10863 13158 5.60 6122 7829 9717 12166 14737 6.50 9083 11277 14120 17104 CE Certificate Our EPC Project in different industry Our Workshop Company Introduction Jiaozuo Xinheng Heavy Industry Machinery Co., Ltd is specialized in designing , developing and manufacturing innovative and systematic conveying machinery such as belt conveyor, pipe conveyor, bucket elevator, screw conveyor, conveyor rollers, conveyor idlers, conveyor pulley, and various kinds of components related to the conveyors, which mainly applied for mining, coal, metallurgy, power plants, dork, sea ports, grain, chemical, and other bulk material transmission industries. Jiaozuo Xinheng established since 2001 with total registered capital of RMB 108 million, it covers an area of 80,000 square meters with construction area of 26,000 square meters, existing over 400 technical engineers and skilled workers. There are more than three hundreds sets of specialized production equipments and testing machines to guarantee for the advanced technology and high quality.
Precision CNC milling parts Completed by CNC milling and forming grinding Accuracy of our custom cnc machining milling parts can be achieved within �±0.002mm. Main products: all kinds of precision parts, connectors, fixture, standard parts, mold design, development and manufacturing. Business projects: precision molding grinding, precision EDM, CNC wire cutting, precision milling machining. Independently research and develop and design automation production machine, to solve the human bottleneck problem and production obstacles for clients. Customized customer demand, research and develop automated production in accordance with the customer production planning. Automated assembly production, share client capacity, OEM production to finish customer delivery. We cooperated with the businesses from different countries and regions Japan ABLE, Belgian Accuritas, Taiwan Cheng Wei Precision Industry Co., Ltd., Cheng Ming Electronic Science and Technology Co., Ltd. (Dongguan) Our company wants to establish long-term cooperative relationship with the following types of foreign enterprises: Electronics, automotive, electrical machine, electrical equipment, instrumentation, home appliances, communications and other industries. The column and base support the remaining parts of a milling machine, and the spindle is lubricated by an oil reservoir and pump in the column. The base supports the column and includes a coolant reservoir and a pump for coolant delivery during machining operations. Knee The gearing mechanism is housed inside a knee. Dovetail ways connect the knee to the column. A vertical positioning screw, often known as an elevating screw, supports and adjusts it. The elevating screw moves the knee up and down by raising or lowering the lever using a hand or power feed. Saddle and Swivel Table The table is supported by the saddle, which is on the knee. In horizontal milling m/c, the saddle slides on a horizontal dovetail on the knee, and the dovetail is parallel to the spindleâ??s axis. The saddle swiveled (revolved) horizontally in both directions, and the swivel table was attached to it. Spindle A milling machineâ??s cutting tools are held and driven by the spindle. It is supported by the column and is positioned on bearings. An electric motor drives the spindle using gear trains located on the column. The spindle face, close to the table, is machined with an internal taper. The front face has two keys that give a positive drive for the cutter holder or arbor.
Product Characteristics 1. simple and efficient, almost all the operation could be done by touch screen man-machine interface set to run. 2. Good finish 1) The polishing head cloth wheel is accelerated by the traditional triangle belt; the pressure is adjusted by the precise current measuring device; it could satisfy all required linear velocity and pressure for different crafts. 2) The moving of the polishing head adopts the linear ball guide rail and the sliding spiral screw drive structure to make the operation more reliable. 3) high precision spindle and bearing to ensure the spindle rotation smooth, high precision, variable frequency stepless speed, to meet the needs of different process speed. 3. Low Noise, excellent sealing performance for the ventilation system. 4. Stable performance, long service life.
TC series CNC inclined bed lathe adopts 45° overall inclined bed structure, with high precision linear rolling guide, high positioning accuracy, smooth chip removal, suitable for high-speed and high-precision machining. The X and Z feeds are directly connected to the lead screw by servo motor with high torque and low inertia elastic coupling to ensure positioning accuracy and repeated positioning accuracy. *45 degrees inclined bed CNC lathe * Available with chip conveyor * Cutting type suitable for bearing, gear machining * High speed type is suitable for high speed and high precision machining * 8ft Hydraulic chuck *10-station hydraulic tool tower Type: Vertical Dimension(L*W*H)/mm: 3800X1700X1850 X axis travel/mm: 230 Y axis travel/mm: 1000
CONTAINER/ TRAILER TWISTLOCK R405VAK 905.202.000 With LOCKING PIN 52MM with weight of k:- 12.2Kg Locking nut with thread made of Cast/Forge Steel Twistlocks are completely Zinc Plated . Kindly Mail us for the Drawings and Detailed Specifications. We are manufacturer, Exporter of container/ Trailer Twistlocks viz; Screw Type, Handle Type, Box Type, Dovetail and Container Corner Castings And Lashing Parts viz; Container Door Hinges, Door Locks and many more variety. We can manufacture as per your Drawings, Quality and Specifications at much Competitive prices as your dedicated Vendor from india. Truck / Trailer / Tractor / Automotive / Intermodal / Agri-Tools / Mining / Earthmover / Excavator / Shipping / Deck Lashing Parts / Marine Trailer & Caravan Parts / Towing & Hitch Parts / Sheet Fabricated / Welded / Forged / Cast & Machined Parts - Specialist.
Digital Rail Straight Edge Digital Rail Straight Edge is used for measuring vertical railway line rail abrasion and flank wear, it includes reference positioning frame and installed on the framework of reference positioning auxiliary positioning screw and the depth of the rail vertical abrasion, side abrasion measured in feet, its structure is simple, intuitive and accurate measurement data, and upper and lower rapidly, operator safety, its light weight, convenient to carry. Benefits: Digital Rail Straight Measuring Ruler has the advantages of high measuring accuracy, easy to operate, LCD digital display etc. Model: LJ-ZD-I Type: Digital Straight Edge Material: Carbon Steel Dimensions (L x W x H) (mm):120*12*24 cm Measurement range:±5 Indication error: ±0.06 Measuring length:1000
Product Description Digital Rail Straight Edge Digital Rail Straight Edge is used for measuring vertical railway line rail abrasion and flank wear, it includes reference positioning frame and installed on the framework of reference positioning auxiliary positioning screw and the depth of the rail vertical abrasion, side abrasion measured in feet, its structure is simple, intuitive and accurate measurement data, and upper and lower rapidly, operator safety, its light weight, convenient to carry. Benefits Digital Rail Straight Measuring Ruler has the advantages of high measuring accuracy,easy to operate,LCD digital display etc. Specification Model LJ-ZD-I Type Digital Straight Edge Material Carbon Steel Dimensions (L x W x H) (mm) 120*12*24 cm Measurement range ±5 Indication error ±0.06 Measuring length 1000
Pressure ranges to 20 000 psi (1 400 bar) Accuracy better than 0.015 % of reading (Increased accuracy option of 0.008 %) Mineral oil and distilled water models Dual piston models allow calibration over a wide range Psi, bar, kgf/cm2, kPa and MPa ranges available Dual piston models for calibration over a wide pressure range Built-in lever style hand pump now standard on all hydraulic models Mounted spirit level and adjustable feet High quality screw press for fine pressure control Test station design with O-rings eliminates the need for PTFE tape or wrenches Acrylic reservoir provides visibility of fluid level and quality Improved case with springloaded latches for hood Built-in drain plug to remove old fluid Sturdy weight box with hinged lid and side handles for easy transport
The scope of application The light used for zone 1,zone 2 dangerous place,explosive air mixture:lA, IIB,IC,as the illumination of platform boundary light and vessel deck. Products characteristic 1.The shell adopt good quality cast brass alloy materiall,with spraying plastics on surface. 2.The outside tighten screw is stainless steel material. 3.The lampshade has the function of temperature resistance shake up. 4.The ilumination adopt LED,the working life can get up to 50000 hours. 5.The LED starter has stabled components,to assure that the circuit has a long lifetime,and it has the protection for the short circuit and over load, to assure that the LED light work for long term. 6.Approval by ATEX-B,certificate number TA***
The scope of application The light used for zone 1,zone 2 dangerous place,explosive air mixture:lA, IIB,IC,as the illumination of platform boundary light and vessel deck. Products characteristic 1.The shell adopt good quality cast brass alloy materiall,with spraying plastics on surface. 2.The outside tighten screw is stainless steel material. 3.The lampshade has the function of temperature resistance shake up. 4.The ilumination adopt LED,the working life can get up to 50000 hours. 5.The LED starter has stabled components,to assure that the circuit has a long lifetime,and it has the protection for the short circuit and over load, to assure that the LED light work for long term. 6.Approval by ATEX-B,certificate number TA***
The scope of application The light used for zone 1,zone 2 dangerous place,explosive air mixture:lA, IIB,IC,as the illumination of platform boundary light and vessel deck. Products characteristic 1.The shell adopt good quality cast brass alloy materiall,with spraying plastics on surface. 2.The outside tighten screw is stainless steel material. 3.The lampshade has the function of temperature resistance shake up. 4.The ilumination adopt LED,the working life can get up to 50000 hours. 5.The LED starter has stabled components,to assure that the circuit has a long lifetime,and it has the protection for the short circuit and over load, to assure that the LED light work for long term. 6.Approval by ATEX-B,certificate number TA***
The internal combustion rail drilling machine is an essential tool for line maintenance, construction and emergency repair operations in railway works and engineering departments. It adopts a hollow drill bit and a screw nut tightening mechanism with a quick-opening function. Easy to operate and safe to use. The machine is also equipped with an automatic water supply and cooling device for the drill bit. When the drilling starts, the cooling water is automatically supplied, and after the drilling is completed, it stops automatically. Gasoline engine power 1.47kW (Mitsubishi) or 1.2kW (Thailand Honda) Maximum hole diameter 31mm Spindle revolutions 250~ 285r/min Drilling time 40S Dimensions 800 X 340 X 400mm Net weight of the whole machine 23kg
The internal combustion rail drilling machine is an essential tool for line maintenance, construction and emergency repair operations in railway works and engineering departments. It adopts a hollow drill bit and a screw nut tightening mechanism with a quick-opening function. Easy to operate and safe to use. The machine is also equipped with an automatic water supply and cooling device for the drill bit. When the drilling starts, the cooling water is automatically supplied, and after the drilling is completed, it stops automatically. Gasoline engine power 1.47kW (Mitsubishi) or 1.2kW (Thailand Honda) Maximum hole diameter 31mm Spindle revolutions 250~ 285r/min Drilling time 40S Dimensions 800 X 340 X 400mm Net weight of the whole machine 23kg
NZG31 Petrol Engine Rail Drilling Machine This machine is an indispensable tool for railway maintenance construction and emergency repair operations It uses a hollow drill bit a screw nut clamping mechanism with quick opening function fast clamping accurate positioning fast drilling simple operation and safety use Place of Origin Hubei China Type Rail drilling Machine Material Stainless Steel Dimensions L x W x H mm 800340400 mm Brand Name Linkage Product name Rail Cutting Machine Place of Origin Hubei Idle Rev 270rmin Borehole diameter 9836mm Power of petrol engine 12kW Spindle RPM 250 285 rmin Drilling time 25s Specification linear velocity 400 32 4 70m s Engine type fourstroke petrol engineHonda weight 17kg
Digital Rail Straight Edge Digital Rail Straight Edge is used for measuring vertical railway line rail abrasion and flank wear it includes reference positioning frame and installed on the framework of reference positioning auxiliary positioning screw and the depth of the rail vertical abrasion side abrasion measured in feet its structure is simple intuitive and accurate measurement data and upper and lower rapidly operator safety its light weight convenient to carry Benefits Digital Rail Straight Measuring Ruler has the advantages of high measuring accuracyeasy to operateLCD digital display etc Specification Model LJZDI Type Digital Straight Edge Material Carbon Steel Dimensions L x W x H 1201224 cm Measurement range 5 Indication error 006 Measuring length 1000
1. Material: - 100% wood powder -100% virgin HDPE plastic powder - Adhesives HCDWood WPC purlin is one of the product lines widely used in all decking projects. WPC purlin is a spare part that is installed synchronously with HCDWood WPC decking. WPC purlin is connected to the floor with anchor bolts. WPC decking boards are connected to WPC purlins with nails. This construction method has many advantages such as: Stable walking, no gaps between WPC decking boards. It is easy to disassemble, repair, and renew during use. The bottom of this type of WPC decking is very ventilated, which is very good for WPC decking as well as users. Code: HD40X30 1. Specifications: 60*25 x2900mm -2s 2. Color: Red brown, Yellow, Coffee, Dark grey, Wood brown. 3. Surface: Smooth. Install connecting pins and screws to fix the WPC purlin and decking
Product parameters: Maximum processed cable diameter: up to 6.99 mm Cutting depth unit: 0.01mm Maximum peeling length: 48mm Maximum number of peeling layers: 9 layers Driving method: motor/ball screw drive (imported from Japan) Display mode: touch screen Blade: 2 pieces, material: imported Swiss tungsten steel Centering piece: 2 pieces, material: imported tungsten steel Clamping device: automatic alignment, motor drive, clamping strength program control Productivity: 500-700pcs/h (depending on cable type and length) Opening method: manual/induction Power supply: 220V/50HZ Power: 250W Weight: 19KG Overall dimensions: 190X285X530 mm Working environment: 0-50 degrees, moderate dryness, vibration-free work surface, moderately dry workshop
Nickel 405 (UNS N04405): Nickel 405 is a variation of Monel 400 with slightly modified chemical composition, featuring higher sulfur content. The increased sulfur content improves machinability but may slightly reduce the alloy's corrosion resistance compared to Monel 400. Despite the slight compromise in corrosion resistance, Nickel 405 still offers excellent resistance to marine environments, alkaline solutions, and acidic conditions. It is often used in applications where improved machinability is desired, such as screw machine parts, fasteners, and valve stems. Nickel 200 (UNS N02200) and Nickel 201 (UNS N02201) are commercially pure wrought nickel grades with low carbon content. They offer excellent resistance to corrosive environments, particularly alkaline solutions.
Hongxin Automation Equipment Co., Ltd. Abbr. Hongxin Auto, is a professional factory in China, specialized in designing and producing many kinds of Automatic Assembly Machine for industrial production. it's Automatic Assembly Machines serve many productions fields includes electronic and electrical switches, screw and spring industries, medical, toy, stationary, automotive, etc. Hongxin Auto supplies Miniature Circuit Breaker Automatic Assembly and inspecting line MCB Automatic Assembly and inspecting Machine, Circuit Breaker Frame Fully Automatic Assembly Machine, Laser Marking Automatic Machine, Torsion Spring Automatic Assembly line, Automotive Camshaft Automatic Pressing and Inspecting Line, Automotive Rocker Arms Automatic Assembly Line, Medical Foldable Plug Automatic Assembly Line, and so on. Hongxi Auto is the professional factory in China, supplies many kinds of automatic assembly machine for customers and keep provide good quality, high efficiency machine for all customers.
