Specification Typical Values Acid Value (mg KOH/g) 203-209 Saponification Value (mg KOH/g) 204-210 Iodine Value (% I2absorbed) 45-56 Titre (oC) 45-48.5 Color (Lov, R/Y) 2.0/20 Max Moisture (%) 0.2 Max Composition (%) C12 1 Max C14 2 Max C16 43-48 C18 3-10 C18-1 37-40 C18-2 6-11 Others 1 Max Product Form Solid Packaging Drum; ISO; Flexibag; Bulk
1. What is PFAD PFAD stands for Palm Fatty Acid Distillate. It is a processing residue resulting from physical refining of crude palm oil products. At room temperature it is a light brow semi-solid, melting to a brown liquid on heating. Up to 80 percent of PFAD is free fatty acid (FFA), with palmitic acid and oleic acid being the major components. The remaining 20 percent is made up of components including triglycerides, partial glycerides, and vitamin E, sterols and squalene's. 2.How is PFAD used? PFAD is used as a renewable raw material in biofuels production as well as to produce candles, soaps, other oleochemical products, and animal feed. Specific to biofuel production in Europe, the EU allows Member States to account PFAD consumption towards greenhouse gas emissions reductions under its Renewable Energy Directive. The amount of emissions reductions depends on the PFAD technical classification, a residue or co-product, which is up to the individual Member State. To verify the emissions reductions, the EU relies on voluntary certification schemes, such as the International Sustainability and Carbon Certification system. 3.What are the benefits6 of using PFAD Producing renewable fuels using PFAD is good for the climate. It is an efficient way to use waste generated through the palm oil refining process, preventing PFAD from going to literal waste. A by-product that is undesirable from the food industry perspective can be very desirable for other sectors. Neste MY Renewable Diesel7 which is refined from PFAD and other waste and residue materials, such as Used Cooking Oil (UCO), helps to replace crude oil-based diesel in transportation. Using Neste MY Renewable Diesel can reduce greenhouse gas emissions by 90 percent on average compared to a diesel-powered vehicle using conventional fossil fuel-based diesel.
Concept - The use of robusta coffee in a blend can assist in producing a strong & full bodied coffee with the right amount of chicory. Chicory produces more roasted flavour than coffee does. Since chicory tends to darken coffee, the brew appears bitter or stronger. Therefore, a blend of fine roasted coffee with an earthy taste of roasted chicory using technology provides an exclusive cup of good strength, acidity & rich flavour. Availability : Pure Robusta beans with Chicory blend Pack Size - Bulk Pack 25 kgs in Cardboard carton. Inside the master carton we have Polyliners. Packing Type : Jars, Pouches, Tins & Sachets. Minimum quantity : 1 tone / LCL Cargo. Load ability - 7.5 MT/20'FCL; 17.5 MT/40'FCL Shelf Life - 2 Yrs.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Acid / Alkali Resistant Tiles/Bricks * Our Acid proof tiles, Acid alkali resistant tiles, Chemical resistant tiles are fully vitrified tiles which are manufactured using special non ferrous clay, processed at extremely high temperatures this process causes the raw materials to fuse and form a compact mass with an extremely low water absorption of less than 0.5% resulting in the formation of a very strong body with a flexural strength of 38 N/mm2, solid through color fade proof with a very hard surface Mohs hardness of 7. * The acid resistant tiles come in a range of sizes and thicknesses from ranging from 8-25mm. Our acid proof tiles meet stringent specification norms of IS 4457:2007 and relevant ASTM/DIN standards which ensure excellent performance in Acid/Alkali/Chemical (expect Hydrofluoric acid and its derivatives). Corrosion Protection Applications * Factory Floors subject to corrosion from Chemicals, Acids, Oil & Solvents * Pickling tank and surrounding areas * Food & Beverage Industry flooring * Battery rooms and Control rooms * Demineralization plants * Walls of washing and Paint shop areas * Acid Resistant Tiles Manufacturers India * Our acid proof tiles provide excellent abrasion resistance, anti-skid properties for worker safety and high aesthetic appeal. We also provide specialized corner tiles for reducing chances for acid attack through construction joints. Our standard sizes are 200x100, 200x200 & 300x300 millimeters.
Shea butter , garcinia kola, bitter kola, hard wood charcoal, bitter kola, chilli pepper, red onions, kola nuts, shea butter nuts, cocoa, cashew nuts, soya beans, shea oil, oleic oil, stearic fatty oil, cashew kernels, natural hard wood charcoal, briquette charcoal.We sell/export top quality agro allied products and base metal from africa to global buyers.
Calcium hypochlorite 70%, pac30%, cashew nut shell liquid (cnsl), cashew nut shell extraction, cardanol, used cooking oil, biomass, cnse pellet.
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
Zinc Sulphate Mono/Hepta(IP/USP) high quality and High Standard Zinc Sulphate Supplier of Zinc Sulphate Heptahydrate-21% , Zinc Sulphate Monohydrate -33% , Zinc Sulphate Monohydrate -35% Zinc Sulphate Monohydrate 26% 33% Zinc Sulphate Powder, the rich source of zinc is essential for healthy growth and reproduction in plants.
Price: DEPEND ON QUANTITY Specification: 85% Food or Industrial grade Brand Name : Chemcohealth Place Of Origin : China Moq : 1 FCL Product Appearance : Colorless tansparent liquid
One of the most well-known and sought-after byproducts of the refining process of vegetable (mostly sunflower) oil are fatty acids. Fatty acids, an industrial product with a GMP+ certification, are mostly used in the animal formula and feed sector. This is because adding fatty acids or fatty acid-based compounds to an animal feed ration can reduce feed costs. Fatty acids are crushed and processed through a whole cycle. In addition, they are utilized in the manufacturing of soap, glycerin, and stearin, as well as in the food processing industry as a direct formula component. Tocopherols.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7
Coconut oil, used coconut oil, crude coconut oil, virgin coconut oil, desiccated coconut, coconut fatty acid, coconut cream, coconut milk, coconut water, coconut sugar, charcoal briquettes, shisha & hookah charcoal, arabica coffee, robusta coffee..Trading company
Marketing of products such as thermal coal, coke, clinker, cement in bulk and packaged, aggregates, polymers for road paving and natural organic material for absorption of hydrocarbons, acids, spilled biological material. boat, barge brokerage service. sale of spare parts for port equipment, empty stackers, reach stackers, fork lift, terminal tractors, rtg and rmg cranes, ship to shore cranes, any spare part or machine only with part number, any spare part or equipment for the hydrogen and oil and gas industry, lightings systems, fire fighting system..
Product Name: Disposable Vinyl/Nitrile Blend Examination Gloves One-time use, no sterilization, no latex Single use, non-sterile, Latex free Model: S, M, L, XL Sizes: S, M, L, XL Color: blue, green, black, etc. Color: Blue, Green, Black etc. Structure: 5 fingers, with curling, regardless of left and right hands Structure: 5 fingers, beaded cuff for easy donning, ambidextrous Surface type: smooth surface Surface: Smooth Features : PVC/nitrile synthetic gloves are made of PVC resin and nitrile latex material. The product has PVC and The double advantage of nitrile gloves. The Vinyl/Nitrile Blend gloves is compounded with PVC paste and Nitrile latex, and the finished product has the advantage of both PVC and Nitrile glove. The donning feeling is better than vinyl gloves. Much softer than vinyl gloves Sturdy, wearable, longer wearing time than nitrile gloves The wearing time is longer than nitrile gloves. Has good wet hand wearability, easier to wear than nitrile and PVC gloves Easy donning with wet hands and easy donning than nitrile &vinyl gloves. PU coating, free of protein, effectively reduces the risk of allergies PU coating, with no protein in it, allergy risk is reduced effectively. Has better protection, has better acid resistance, alkali resistance and oil resistance Better protection, good resistance of acid, alkali and oil. Better cost-performance