Semi Automatic Screen Printing Machine With Stainless Steel Vacuum Bed Print Area: 15” x 20” (38.1 x 50.8 cm) Max Substrate Thickness: 5~7 mm, Micro Registration System: ± 0.01mm -Print area 15” x 20”. -Its easy to start and operate. -Single Phase -No compressor required. Technical features: 1. PLC (Programable logic controller) 2. High quality electrical components 3. AC Motor of Class “F” Insulation 4. VFD (Variable Frequency Drive) for precise speed control 5. Imported geared motor (lifetime lubricated) 6. High quality steel fabrication 7. High quality pressure die-cast aluminum parts 8. Hard anodized aluminum extrusions 9. All moving parts hardened for longer life 10. Honey comb vacuum bed with stainless steel top 11. Zero backlash precision micrometer for vacuum bed movement to get accurate registration 12. Compact powerful vacuum blower to hold substrate firmly while printing 13. Squeegee head motion on precision imported guide rails 14. Imported timing belt for squeegee head movement 15. Independent squeegee and flood bar pressure control 16. Aluminum extruded squeegee holder 17. Aluminum extruded flood bar with 0.5 mm edge to print consistent halftones thus reduces ink deposition 18. Optional stainless steel edged flood bar to print ceramic / glass inks 19. Hard nickel plated metal parts to avoid corrosion 20. Hardened cams and shafts to increase life of machine thus reduces wear and tear 21. Castor wheels for easy mobility 22. Foot switch for easy operation 23. Auto mode to bypass foot switch 24. Safety bars to avoid accident 25. High safety standards. As normal packaging requirement.
Semi automatic flat-bed Screen printing machine for rigid substrates up-to 5 to 7 mm thick. Parallel lift with adjustable screen frame size and double stroke selection. -Max print area: 22” x 28” (559 mm x 711 mm) -No Compressor required -Single Phase Features: 1. Adjustable screen frame holder 2. Variable printing stroke length 3. Single/Double stroke selection 4. Digital Stroke Counter 5. Parallel screen frame movement (Convenient for spot UV varnish and low viscosity inks to avoid ink spillage all over the screen) 6. Peel off mechanism (To achieve fine reproduction of halftone dots and avoid smudging, bleeding and smearing) Optional features: Vacuum by foot (to register on curly and unstable paper/ substrates accurately and easily) Technical features: 1. PLC (Programable logic controller) 2. High quality electrical components 3. AC Motor of Class “F” Insulation 4. VFD (Variable Frequency Drive) for precise speed control 5. Imported geared motor (lifetime lubricated) 6. High quality steel fabrication 7. High quality pressure die-cast aluminum parts 8. Hard anodized aluminum extrusions 9. All moving parts hardened for longer life 10. Honey comb vacuum bed with stainless steel top 11. Zero backlash precision micrometer for vacuum bed movement to get accurate registration 12. Compact powerful vacuum blower to hold substrate firmly while printing 13. Squeegee head motion on precision imported guide rails Imported timing belt for squeegee head movement 15. Independent squeegee and flood bar pressure control 16. Aluminum extruded squeegee holder 17. Aluminum extruded flood bar with 0.5 mm edge to print consistent halftones thus reduces ink deposition 18. Optional stainless steel edged flood bar to print ceramic / glass inks 19. Hard nickel plated metal parts to avoid corrosion 20. Hardened cams and shafts to increase life of machine thus reduces wear and tear 21. Castor wheels for easy mobility 22. Foot switch for easy operation 23. Auto mode to bypass foot switch 24. Safety bars to avoid accident 25. High safety standards Advantages: 1. Single phase (plug n play) 2. No expensive air compressor required 3. Reduces manpower 4. Minimum maintenance 5. Minimum settings 6. Quick job changeover, faster production 7. No hidden cost, it's fully featured 8. Lower squeegee rubber cost (8 x 30 mm) 9. Requires less space 4.7’ x 4.0’= approx. 19 sq. ft. 10. Screen frame holder compatible with aluminum, metal & wooden frames 11. Print with any types of solvent, plastisol and UV inks 12. Minimum investment, faster returns. As per standard practice.
Parameters of our T shirt printing printer NC-1100B: Model: NC-1100 B Printer nozzle: Epson Micro piezo ( 180 nozzles* 8lines) Printer size: 1100mm*2500 mm Printer dimension: 3650mm*1900mm*1250mm Printer weight: 400KG Print method: Intelligent bidirectional printing Max print thickness: 120mm Max bearing weight : less than 100 KG Transmission type: USB 2.0 Printing resolution: Max :2880dpi*2880dpi Min : 360dpi*360dpi Ink type: Double 4 colors( c,m,y,k) Ink supply type : Automatic continuous Power source : AC220V. 220W Height adjustment : Automatic Printing speed : A4 one minutes Ink system : 1L Special ink : Pigment/Dye ink/ Textile ink/ solvent ink Operating platform : Windows95, 98, NT, 2000, XP Working environment. T shirt printing printer: G.W. : 400kg ; Case size: 330*170*121cm ; Packing : Fumigation-free wooden case (seaworthiness and suitable for LCL).
Key Specifications/Special Features: Features: Unique "V" shaped laser cavity, higher beam quality in the same power output. Straight cavity semiconductor model dedicated to production lines and automated production line equipment. Higher laser quality (M2¡Ü6), smaller spot, intensified energy. Maintenance-free designing, requires no consumables, longer average failure-free working(over 10, 000 hours). Red light positioning system, easy to operate. Improved cooling system, smaller size and better effect. Applications: Can mark all metals and a great many of non-metal materials. Suitable for applications that requires high precision and accuracy in depth markings. Widely used in electrical components, integrated chips (IC), electric appliance, communication equipments, tools, precise machinery, glass frames, clocks and watches, accessories, automotive accessories, plastic buttons, construction material, packaging, PVC pipes and medical instrument processing and manufacturing. Available specifications: Max. laser powers: 50W/75W/100W Laser wave length: 1,064nm Beam quality: M2 Ü6 Laser repetition frequencies: Ü30KHz Marking areas: 70mm x 70mm/100mm x 100mm(standard) Adjustable marking areas: 140mm x 140mm/170mm x 170mm Marking depths:Ü0.30mm/Ü0.40mm Marking linear speed options: Ü7,000mm/s Min. linear widths: 0.01mm Min. character: 0.3mm Repetition accuracy: À0.003mm Rated power consumptions: 1.5kW/2kW Supply voltage: 220V//50HZ/8A Available specifications: Max. laser powers: 50W/75W/100W Laser wave length: 1,064nm Beam quality: M2 Ü6 Laser repetition frequencies: ¡Ü30KHz Marking areas: 70mm x 70mm/100mm x 100mm(standard) Adjustable marking areas: 140mm x 140mm/170mm x 170mm Marking depths: Ü0.30mm/Ü0.40mm Marking linear speed options: Ü7,000mm/s Min. linear widths: 0.01mm Min. character: 0.3mm Repetition accuracy: À0.003mm Rated power consumptions: 1.5kW/2kW Supply voltage: 220V//50HZ/8A
Speed Range IPH 3000-10000 Sheet Size (max.) mm 640x483 Sheet Size (min.) mm 250x210 Plate Size mm 533x645 Sheet Thickness (max.) mm 0.60 Sheet Thickness (min.) mm 0.04 Printing Area (max.) mm 635x 470 Plate Thickness (max.) mm 0.42 Blanket Size mm 650x585 Blanket Thickness (max.) mm 1.90 Feeder Capacity mm 800 Delivery Capacity mm 500 Gripper Bite mm 5-8 Gripper Margin mm 9 Power Requirement KW 9 LXWXH(H) mm 3010 x2460 x1800 Weight Kg 4450. 3500*1682*2190mm Gross weight 4242kg Net weight 3700kg.
Item No.: BR-280 Intermittence rotary die cutting machine Max. paper width: 280mm Max. die cutting speed:10000times/h Cylinder diameter:104mm Max. rewinding dia. : 600mm Max. unwinding dia. : 600mm Power supply: Three phase 220V/50HZ Machine size: 1200X1100X1200mm Machine weight: 1200kg Die cutting precision: +-0.01mm Standard accessories: Unwinder 1pc,Rewinder 1pc,standard tools 1set Optional accessories: Slitting unit, UV coating unit, printing unit. Features: 1. Dont need to adjust die cutting pressure,with long service life and simple to change and preserve. 2. New and advanced design,more easy to operate and control.Multi functional design to meet your various needs. 3. Dont use magnetic cylinder but only magnetic fost knives,save more production cost for you. 4. Yout need to change various cylinders becaasue of intermittence running mold.An ideal machine to meet your needs. 1piece/wooden box.
Item No.: Rotary die cutting&slitting machine Max.Web Width(mm): 320 Max.Die Cutting Speed(m/min): 60 Max. Slitting Speed(m/min): 80 Die Cutting Perimeter(mm): 177~476 Power supply: Single phase/220V/50HZ Max. unwinding dia.(mm): 500 Max. rewinding dia.(mm): 500 Machine Weight(KG): 600 Machine size(mm): 1600*900*1200 Wooden Box Packing Size(CBM): 3.50 Delivery date: Within 28days. Features: 1. This machine with rotary die cut and slit functions. 2. The rewinder shaft with semi-automatic tension controller. 3. The machine with automatic web guide and tracking sensor to guarantee the die cutting and slitting precision; 4. The machine with one unwinder shaft and two rewinder shaft(these shafts are air tube shaft with diameter 76mm) Applied range: Self-adhesive materials,thin polyester fiber film trademark, Standard functions: Unwinder-Die cutting-Waste collecting-Slitting-Rewinder Optional functions: Lamination unit. 1piece/wooden box G.W. :600kg.
Item No. : BR-280 Automatic Roll to Roll UV coating machine Max. Web width: 280mm Max.Unwinding Dia.: 600mm Max. Rewinding Dia.: 500mm Max. coating speed: 30m/min Machine weight: 880KG Power supply: Single phase 220V/4.8KW/50HZ Machine Size(mm): 1500*1000*1500 Packing size(CBM): 3.60 Delivery date: Within 35days Features: 1. This machine can run with the printing machine on-line or off-line 2. Ideal machine to deal with the printing products,to make it looks beautiful. 3. With unwinder,rewinder and UV drying unit,automatic counting. 4. Ideal for roll materials,good Post-Press Equipment for printing products. 1piece/wooden box.
TS-150 is a new kind of high temperature screen printing machine. It can be used to print any kinds of roll material, such as label, ribbon, shoelace, cotton, elastic, heavy tape and slice any roll material. The specification of our screen printing machine: (1) High temperature ink printing; print any kinds of high temperature ink, such as plastisol, silicon, pomp ink. (2) Double-sides printing; precisely print any roll to roll material with width
Size: 1600mm, 1800mm, 3300mm Which use to drying the printed picture make the printer run roll to roll. Carton, 20kgs 0.1cbm.
Environmental Responsibility: Conventional printing inks release Volatile Organic Compounds (VOCs) which are organic chemical compounds that have high enough vapor pressures under normal conditions to significantly vaporize and enter the atmosphere. A wide range of carbon-based molecules, such as aldehydes, ketones, and other light hydrocarbons are VOCs. These compounds are harmful to both humans and the environment. UV Printing inks release ZERO VOCs; making them both safer for you and our environment. No wasted drying time Conventional printing inks require time to dry after they are printed. This means that you are paying for the additional time that it takes for your job to dry before it can be cut, folded and finished. UV printing inks are completely dry and cured when they come off the press. Martin Graphics UV Printing speeds up this process. Your printing materials can go directly to bindery without any wasted drying time. Printing Effects: UV technology opens the door to many state-of-the-art printing effects. Chemical Embossing, Metal FX® and UV Varnishes are just some of the options that we offer for you projects. UV printing also allows us to print on plastic, heavier card stocks, and metallized paper. type XTR-UV1325 Spray-head: spt 1020-35pl Spray-head quantity 4/6/8 Print span 2500mmx1300mm Speed 360dpi 2pass 40m/hr 360dpi 4pass 18.46m/hr 360dpi 6pass 11m/hr Maximum width 2500mmx1300mm Maximum weight 400kg.
Detailed Product Description Product Model : TAIMES 3206H SOLVENT PRINTER Printhead : Seiko SPT510-35PL Number of Printhead : 6 Heads Maximum Print Width :3200mm Output (m2/h) Print Mode Standard Output (m2 /h) 240x540dpi 3pass 48.19 240x720dpi 4pass 37.12 240x540dpi 6pass 25.63 360x540dpi 3pass 35.73 360x720dpi 4pass 26.80 360x540dpi 6pass 18.46 360x720dpi 8pass 14.04 Ink Type : Solvent Ink / ECO-Solvent Ink Color : 6 Colors( C , M , Y , K , Lc , Lm ) Capacity : 5L Per Main Tank of Each Color Ink Supply System : Low Ink Detector, Auto or Manual Ink Supply System Seiko ink: Solvent-Base Pigment, Two-year Outdoor Life Media Width : 3300mm Media Type : Vinyl,Flex,Polyester,Back-lit Film, Window Film,etc Auto Media Feeding System Equipped ( Max. Media Weight 80kg ) Auto Cleaning System :Positive Pressure Cleaning. Pre-heating & Drying System : Equipped Clamp : Equipped Print Interface : USB2.0 Printhead Height : 2 to 4 mm Above Media Adjustable RIP Software: Maintop , UltraPrint , PhotoPrint , Topaz , Wasatch , Caldera Input Power : AC 220V ,50Hz/60Hz Machine Dimension : L4,300 x W800 x H1,160 mm Net Weight : 340Kg Package Dimension : L4,500 x W1,100 x H900 mm Gross Weight : 420Kg Operation Environment Temperature: 20~28 o C Humidity: 40%~60% What's special: +1 Year Warranty (parts and labour) + Ongoing Support for our solvent printers. + guiding Video DVD + User manual in English + online technical support. + Original Japanese drop on demand piezo print head with steel plate protected, 510 active nozzles/print head, 71.8mm printing width. + 6 color plus 720dpi makes unmatchable color and high resolution.Photo effect can be up to1440dpi. + The voltage of the print head, automatically adjustable to the temperature, prevents blockage caused by the change of temperature. + The function of skipping white space is added to increase productivity. + The adjustment of bi-direction, step and carriage moving speed can be made during printing. + Edge feather function can blur the pass line and feather the pass edge. + Alloy-aluminum platform with good structure design, which ensure the printer is stable and firm. + Safely designed drying fan shortens drying time and allows prints to dry fast. + User friendly control panel for easy operation. Delicated details makes perfect. Relative Information: Brand Name:TAIMES Certificate:CE/ISO900 Place of Origin:China Guangdong *Payment Term:By 30% T/T advanced Delivery lead time: 5-7 days. Package: wooden package. L4,500 x W1,100 x H900 mm, Gross Weight : 420Kg.
Model: solvent printer(taimes 33vcx 3.3m xaar720/1440dpi ) Resolution, speed, price are perfect to unify. Features: * 1 year warranty (parts and labour) ongoing support for our solvent printers. * Guiding video dvd user manual in english online technical support. * Equipped with xaar 130/600dpi print heads. * Usb2.0 high-speed data transport. * Automatic print heads heating system. * Double transmission media feeding rolls. * Reliable automatic solution cleaning system. * Front, middle and back media heating system. * Distinctively - wavy printing, create excellent result. * 2-4mm adjustable height between print heads and media. * Air pumping system for ink pressure and print heads cleaning. * the voltage of piezo print head will be adjusted automatically according to the working temperature, which avoids ink clogging. * Automatic head cleaning system maintains the best condition for head. * Safely designed drying fan shortens drying time and allows prints to dry fast. * Print technique: xaar 130/600dpi, 8/12 heads * Printing quality: photo effect up to 1440dpi * Max printing width: 3250mm * Max media width 3300mm * Media type: pvc, flex, vinyl, window film, polyester, etc. * Ink type solvent-eco solvent base ink: c, m, y, k * Color :4 color * Output (12 heads): 3pass, 46m2/h 4pass, 35m2/h 8pass, 23m2/h 6pass, 17m2/h. Package size / weight l4, 500mm x w925mm x h1, 200mm / 368kg.
* Variable dot printing technology * 180x8 nozzles in one printhead, one head integrate 4 colors printing. * Automatic cleaning and capping system. * Mature constant pressure ink supply system. * LCD screen digital heaters control. * Stress media feeding. * Wavy & Feather printing mode. Adopt variable dot printing technology. Totally 8 columns of nozzled are contained in the printhead, each column contains 180 nozzles. Just one printhead is already sufficient for 4 colors printing. Therefore, it ensures perfecting printing quality by avoiding physical alignment between different printheads. Self-developed automatic cleaning and capping system which makes the operation and maintenance convernient. Inherited from TAIMES large format printers, the mature constant pressure ink supply system is clean and reliable. Composition of all options: Tri-heater System, Platform Vacuum Fans, Media Dryer Fans. The LCD screen digital heaters control, allows easy operation. Stress applied to the media feeding structure so as to match various inkjet printing media perfectly. Item Specification: TAIMES 180E Printhead: 180 x 8 piezo nozzles, variable dots Maximum Print Width : 1800mm (70.8 inch) Maximum Media Width: 1860mm (73.2 inch) Precision: 360, 720Dpi; 360, 1080Dpi; 360, 1440Dpi;360, 2880Dpi; 720, 720Dpi; 720, 1080Dpi; 720, 1440Dpi; 720, 2880Dpi; Print Speed: High speed: 13.8 sqm/hr (360, 1440Dpi,4pass); Standard: 10.6 sqm/hr (720, 1080Dpi,6pass); High Quality: 6.2 sqm/hr (720, 1440Dpi,8pass); Ink: Type: Eco Solvent Ink Color: Cyan, Magenta, Yellow, Black Capacity: 1000ml Per Main Tank of Each color Ink Supply System: Low Ink Detector, Auto Ink Supply System Media: Types: Glossy Photo Paper, PP, Polyester Film, Inkjet Canvas, etc Feeding: Roll Media or Sheet Media Auto Media Feeding & Take-up System: Auto Media Feeding (Equipped) Automatic Cleaning System Printhead Cleaning System: Automatic Dry-preventing System Pre-heater & Dry System: Adjustable Post-heating. Clamp: Equipped Print Interface: USB2.0 Printhead Height: 1 to 3mm Above Media Adjustable RIP Software: MainTop 5 Input Power: 100,240V, 50Hz/60Hz. Machine Dimension: L2830mm , W740mm, H1280mm Package Dimension: L3020mm , W740mm, H970mm weight: Net Weight: 220 Kg Gross Weight: 300 Kg.
Product Model: Taimes konica 512/42PL solvent printer Printhead: KONICA 512/42pl Quantity of Printhead: 4, (option 8 or 12 Heads) Maximum Print Width: 3200mm (10.5ft) Output (sqm/h): Print Mode: Standard Output(sqm/h) 4 Heads : 8heads 180x720dpi 2pass: 40 : 80 240x720dpi 2pass: 30 : 60 180x1080dpi 3pass: 26: 52 240 x 1080dpi 3pass: 20 : 40 Ink: Type : Solvent Ink Color : 4 Colors( C , M , Y , K ,) Capacity : 5L Per Main Tank of Each Color Ink Supply System : Low Ink Detector, Auto or Manual Ink Supply System Media: Width : 3300mm (10.8ft) Type : vinyl, flex, polyester, back-lit film, window film, etc Auto Media Feeding System: Equipped (Max Media Weight more than 100kg ) Auto Cleaning System: Positive Pressure Cleaning Anti-clogged Flash Function & Capping System Print Interface: USB2.0 Printhead Height: 2 to 5 mm Above Media Adjustable RIP Software: PhotoPrint 10.0,Maintop , UltraPrint Input Power: AC 220V ,50Hz Machine Dimension: L4,400x W940 x H1,430 mm; Net Weight: 680Kgs (1,499lbs) Package Dimension: Fully assembled: L4,9600 x W1220 x H1790 mm; Gross Weight: 800Kgs (1,764lbs); Two units in one 20 feet container OperationEnvironment: Temperature: 20~28 Humidity: 40%~60%. Fully assembled: L4,9600 x W1220 x H1790 mm; Gross Weight: 800Kgs (1,764lbs); Two units in one 20 feet container.
Product Model: Taimes konica 512/42PL solvent printer Printhead: KONICA 512/42pl Quantity of Printhead: 4, (option 8 or 12 Heads) Maximum Print Width: 3200mm (10.5ft) Output (sqm/h): Print Mode: Standard Output(sqm/h) 4 Heads : 8heads 180x720dpi 2pass: 40 : 80 240x720dpi 2pass: 30 : 60 180x1080dpi 3pass: 26: 52 240 x 1080dpi 3pass: 20 : 40 Ink: Type : Solvent Ink Color : 4 Colors( C , M , Y , K ,) Capacity : 5L Per Main Tank of Each Color Ink Supply System : Low Ink Detector, Auto or Manual Ink Supply System Media: Width : 3300mm (10.8ft) Type : Vinyl,Flex,Polyester,Back-lit Film, Window Film,etc Auto Media Feeding System: Equipped (Max Media Weight more than 100kg ) Auto Cleaning System: Positive Pressure Cleaning Anti-clogged Flash Function & Capping System Print Interface: USB2.0 Printhead Height: 2 to 5 mm Above Media Adjustable RIP Software: PhotoPrint 10.0,Maintop , UltraPrint Input Power: AC 220V ,50Hz Machine Dimension: L4,400x W940 x H1,430 mm; Net Weight: 680Kgs (1,499lbs) Package Dimension: Fully assembled: L4,9600 x W1220 x H1790 mm; Gross Weight: 800Kgs (1,764lbs); Two units in one 20 feet container OperationEnvironment: Temperature: 20~28 Humidity: 40%~60%. Fully assembled: L4,9600 x W1220 x H1790 mm; Gross Weight: 800Kgs (1,764lbs); Two units in one 20 feet container.
Ricoh, Minolta, Kyoecra, Sharp, Toshiba.
Machine type: Water-based, Eco-solvent Print head: DX5 Micro-Piezo Head Nozzles: 1440 nozzles per head Resolution: 1440dpi (Max) Printing width: 1.52 m(Max) Speed: 6.7-19m2/hour Control Software: iPrint 3.0 Weight: 75 kg (bracket included) Voltage: AC 100-240V 50/60HZ.
High printing precision, high stability with competitive price Number of nozzles: 1440 nozzles per 1 head Resolution: 1440dpi (Max) Interface: USB 2.0RS232 Printing width: 1.8 m(Max) Speed: 720 x 720dpi 12m2/hour(Max) Support materials:self-adhesive paper, PVC, mesh fabric, textile, PVC flex banner, Self Adhesive Vinyl , paper, fabric, leather and etc. A-Starjet 5 The real leader of large format printer with high-resolution. Perfect combination of quality and performance. Number of nozzles: 2880 nozzles per 2 head Ink Colors: Cyan, Magenta, Yellow, Black Resolution: 1440dpi (Max) Printing width: 1.8 m (Max) Speed: 720 x 720dpi 22.5m2/hour Power: 1000W(Max)300W(Printing) Printer Dimension(W x D x H ): 2,840 x 900 x 1,250 mm (bracket included) Weight: 220 kg (bracket included) A-Starjet 5.5 Number of nozzles: 2160 nozzles per 4 head Resolution: 1440dpi (Max) Printing width: 1.8 m(Max) Speed: 360 x 1080dpi 22m2/hour(Max) Control Software: Control Software A-Starjet5 Control Software (Cn/En) Weight: 220 kg (bracket included) Voltage: AC 220-240V 50/60HZ or AC 110-120V 50/60HZ A-Starjet 5.5L Number of nozzles: 2160 nozzles per 4 head Resolution: 1440dpi (Max) Printing width: 1.8 m(Max) Speed: 360 x 1080dpi 22m2/hour(Max) Control Software: Control Software A-Starjet5 Control Software (Cn/En) Weight: 220 kg (bracket included) Voltage: AC 220-240V 50/60HZ or AC 110-120V 50/60HZ.
A Starjet 7701 One DX7 print head Number of nozzles: 1440 nozzles per head Ink Colors: CMY K Interface: USB 2.0RS232 Printing width: 1.8 m(Max) Speed: 6.5-17 m2/hour RIP Software: IPrint 3.0 A Starjet 7702 Two DX7 micro-piezo print head Number of nozzles: 1440 nozzles per head Ink Colors: CMY K Interface: USB 2.0RS232 Printing width: 1.8 m(Max) Speed: 13-34.5 m2/hour RIP Software: IPrint 3.0 A Starjet 7702L Two DX7 micro-piezo print head Number of nozzles: 1440 nozzles per head Ink Colors: CMY K Interface: USB 2.0RS232 Printing width: 3.2 m(Max) Speed: 13.8-40 m2/hour RIP Software: IPrint 3.0.
