Nano-Print

Semi automatic flat-bed Screen printing machine for rigid substrates up-to 5 to 7 mm thick. Parallel lift with adjustable screen frame size and double stroke selection. -Max print area: 22” x 28” (559 mm x 711 mm) -No Compressor required -Single Phase Features: 1. Adjustable screen frame holder 2. Variable printing stroke length 3. Single/Double stroke selection 4. Digital Stroke Counter 5. Parallel screen frame movement (Convenient for spot UV varnish and low viscosity inks to avoid ink spillage all over the screen) 6. Peel off mechanism (To achieve fine reproduction of halftone dots and avoid smudging, bleeding and smearing) Optional features: Vacuum by foot (to register on curly and unstable paper/ substrates accurately and easily) Technical features: 1. PLC (Programable logic controller) 2. High quality electrical components 3. AC Motor of Class “F” Insulation 4. VFD (Variable Frequency Drive) for precise speed control 5. Imported geared motor (lifetime lubricated) 6. High quality steel fabrication 7. High quality pressure die-cast aluminum parts 8. Hard anodized aluminum extrusions 9. All moving parts hardened for longer life 10. Honey comb vacuum bed with stainless steel top 11. Zero backlash precision micrometer for vacuum bed movement to get accurate registration 12. Compact powerful vacuum blower to hold substrate firmly while printing 13. Squeegee head motion on precision imported guide rails Imported timing belt for squeegee head movement 15. Independent squeegee and flood bar pressure control 16. Aluminum extruded squeegee holder 17. Aluminum extruded flood bar with 0.5 mm edge to print consistent halftones thus reduces ink deposition 18. Optional stainless steel edged flood bar to print ceramic / glass inks 19. Hard nickel plated metal parts to avoid corrosion 20. Hardened cams and shafts to increase life of machine thus reduces wear and tear 21. Castor wheels for easy mobility 22. Foot switch for easy operation 23. Auto mode to bypass foot switch 24. Safety bars to avoid accident 25. High safety standards Advantages: 1. Single phase (plug n play) 2. No expensive air compressor required 3. Reduces manpower 4. Minimum maintenance 5. Minimum settings 6. Quick job changeover, faster production 7. No hidden cost, it's fully featured 8. Lower squeegee rubber cost (8 x 30 mm) 9. Requires less space 4.7’ x 4.0’= approx. 19 sq. ft. 10. Screen frame holder compatible with aluminum, metal & wooden frames 11. Print with any types of solvent, plastisol and UV inks 12. Minimum investment, faster returns. As per standard practice.

This is a NANO Carbon ink that is very excellent in electrical conductivity and heat one as a product highly dispersing retreated NWNT (Multi-walled Carbon Nanotube) to Eco-friendly solvents by specific methods. This product is more excellent than thermal inks based on carbon pastes applied to existing heating films, and improved adhesive force with machines through stable dispersing treatments, and thus there are not fire risks owing to electric spark's occurrences. Also, various product manufacturing is possible by various printing methods such as gravure, silk screen, offset, and dipping etc because it is available by implementing resistance value and viscosity, and this product can be applied to various fields such as lodging house' s heating and melting snow, agricultural product¡¯s drying stands, thermal picture frames, thermal waistcoat, and thermal shoes.

This series of products using nano have (no) machine imported special pigment, water-based resin and related additives, high-grade water-based ink after physical reaction and made certain products; no VOC emissions, non-toxic, no inflammable and explosive, no security risks, color color exhibition; HDPE, LDPE, printed extensively. PO table printing plastic substrate.

This series of products using nano have (no) machine imported special pigment, water-based resin and related additives, high-grade water-based ink after physical reaction and made certain products; no VOC emissions, non-toxic, no inflammable and explosive, no security risks, color color exhibition; HDPE, LDPE, printed extensively. PO table printing plastic substrate. Customers can add water printing, high-grade water-based ink company dedicated to plastic gravure and flexographic printing table design.

This series of products using nano have (no) machine imported special pigment, water-based resin and related additives, high-grade water-based ink after physical reaction and made certain products; no VOC emissions, non-toxic, no inflammable and explosive, no security risks, color color exhibition; HDPE, LDPE, printed extensively. PO table printing plastic substrate. Customers can add water printing, high-grade water-based ink company dedicated to plastic gravure and flexographic printing table design.

The product adopts nano have (no) machine, imported special acrylic emulsion paint and related additives, a kind of high-grade water-based ink products after a certain physical reaction and made free of heavy metals and plasticizer, no VOC emissions, non-toxic odor free, fully meet the requirements of food packaging, customers can add water or alcohol color printing, color development strong; high-grade water-based ink company dedicated to the design of the soft packaging for food.

Product introduction: Water-based ink adopt Nano-organic pigments imported with special composite emulsion and additives to produce. It is free from heavy metals and plasticizer which had achieved ROHS, REACH standard. It is also free from VOCs emissions and it is odorless. It had fully compliance with requirements of food packaging. GS-01 Water-based ink is designed for food flexible packaging. Adding water or alcohol as medium, displaying High Quality print on plastic Food Flexible Packaging Product. Suitable application 1. Materials: OPP, PET, NY composite packaging (OPP/PE, OPP/CPP, OPP/VMCPP, OPP/VMPETï¼? PET/PE, NY/PE and etc.) 2. Application: Food Flexible Packaging, Napkins Paper Packaging, Toilet Paper Packaging and other lamination printing packaging. Advantage: â??Stable performance; Long storage time (sealed for more than one year). â??High solid content; Low viscosity; High color saturation; Excellent liquidity; Good for rotogravure printing. â??Excellent adhesion and water proof; Chemicals resistance. â??Good cladding with pigment; Excellent color strength; High gloss; Non-yellowing, non color changing, good composite strength. â??Good rub resistance and transferability; Anti-setoff. â??Excellent printability, used in furniture surface decoration, such as: PP synthetic paper, PVC etc. â??High temperature resistance for composite, and also used as composite adhesive directly; Good stiffness. Package Plastic Barrel in 20kg per Barrel or 1metric Ton . Product storage Keep in Room Temperature, Proper Storage, avoid direct sunlight Make sure barrel are Sealed Properly (Seal will prevent moisture evaporation to avoid hardening of Ink) Avoid dust into ink. Recommended Storage Period: 12 months Notes To have better printing result, the following fact need to be considered 1.Printer Specification (Use can current Printer) 2.Specification of Printing Plates We will provide technical parameters according to the customer's actual situation. 3.Ink must be stirred well before using 4.Ink Pump and Ink Roller is recommended 5.Not mix up with ink of different Brand 6.Make Filtration of used ink is highly recommended

Nano-prinTex is available in 6, 8, 10 and 12 colours; with image area: 16” x 20” (406 x 508 mm); and standard Pallet Size: 19.6” x 32.2” (500 x 820 mm). Salient features of nano-prinTex: • Fully featured • No Pneumatics, No Hydraulics - Power Saver, - Maintenance free • Micro processor with Touch screen control • Aluminum pressure die cast tables • Easy to fix screen registration system • Mechanical indexing: -Hardened cams - Guaranteed repetition accuracy The Grafica’s nano-prinTex spectacularly revolutionizes the textile/garment screen printing industry globally by developing the world's first all electrical-mechanical line of automatic textile printers. Since Grafica Flextronica, the makers of nano-prinTex, is specialised in designing and building 'European-quality screen printing equipment for graphics and high-end industrial markets, their R&D team knows more than most the importance of repeatable accuracy, quality and optimum performance requirements for exceptional productivity to remain competitive in today's formidable marketplace. Moreover, Grafica’s expertise in handling demanding and often complex industrial screen printing applications has resourcefully enabled it to reach out to textile and garment printers, by education and teaching how to deliver the finest in print quality from using high quality screen making equipment. To keep these textile printers straightforward but extremely friendly and reliable, problematic pneumatics and the futile use of outdated hydraulics are long history! So too are noisy polluting compressors, leaving an uncomplicated trouble-free design to be very cost-effective in maintenance and lower energy consumption overall. Even expensive servo drives are totally eliminated, for indexing accuracy, replaced with efficient CNC harden cams since pallets perpetually always stop mechanically in the same position under each print head. Even inexpensive gear motors are enjoying a new lease of life by replacing costly systems to handle essential tasks competently. Too many unnecessary complicated printing machines carry a double burden; they typically have too many parts and superfluous mechanisms that make the whole screen frame and squeegee head needlessly cluttered and over bearing for the operators. The nano-prinTex has been meticulously designed in this respect by making the inner workings of the printing operation exceptionally simplified, fast and extremely easy to operate. Unlike most expensive and tedious PLC control systems, where more than 50% is entirely underutilized due to added extra features never deployed, the nano-prinTex touch screen control panel is kept simple to let the operator follow easy steps with clear legible icons for easier non language comprehension so nothing is overlooked or compromised. Even when loaded with extensive standard features, simplicity has always been the gateway to efficient productivity! Nano-prinTex is manufacturing under stringent conditions to ensure high-level performance and internal quality standards, with full after-sales service and spare parts support. As per normal requirement.

Thermal Conductive Insulation Adhesive Back Copper Foil Tape Material: Copper foil, Copper foil, Nano carbon, Thermal materials Use: Carton Sealing Adhesive Side: Single Sided Adhesive: Acrylic Adhesive Type: Hot Melt Feature: Heat-Resistant Design Printing: No Printing Place of Origin: Guangdong, China (Mainland) Brand Name: Laimeisi Model Number: LMS Product name: Thermal Conductive Insulation Adhesive Back Copper Foil Tape Color: Gold Size: Customized Size Certification: SGS, ISO,Reach, Rohs Surface: Polished Length: 100m Thickness: 55-75um Shape: Customised Thermal conductivity: 560W/mk Packaging & Delivery Packaging Details: Following the customer request Delivery Detail: Shipped in 3 days after payment 1. Grade: SGS, REACH, ROHS 2. Size: customized 3. Standard: LMS-TB Product Nameï¼?Thermal Conductive Insulation Adhesive Back Copper Foil Tape Materialï¼?Copper foil, Nanocarbon, Thermal materials Colorï¼?Black Sizeï¼?Customized size Gradeï¼?SGS, ROHS, Reach Usedï¼?Thermal conductive, high temperature, Led, PC, Heat sink...etc Thicknessï¼?55um, 75um Thermal Conductivityï¼?560w/mk Glueï¼? 3M Feature of Thermal Conductive Insulation Adhesive Back Copper Foil Tape 1.Excellent resistance to heat (dry air), at +260o C continuous and +260o C intermittent.Remains flexible at low temperatures of -40oC. 2.Resistant to ultra-violet light, ozone and weathering processing,pharma ceutical and cosmetic manufacturing area. 3.Good electrical insulation properties 4.Keep constant even at high temperatures. 5.Resistance to chemicals; moderate resistance to general chemical products. Application of Thermal Conductive Insulation Adhesive Back Copper Foil Tape Cooling fin and the heat diffusion film, electronic equipment cooling, Other application need to heat or Conductive, eg: LED light, CPU, GPU, IC, PC...etc.