AUTOMATIC LUBRICATION PUMP ELU - 2700 ELU â?? 2700 is a compact and versatile pump that joins efficiency and performance in a simple all-inclusive pump package for injector and progressive systems both for oil and fluid grease NLGI 000.
SAE 40 - Industrial Oil SAE 50 - Industrial Oil AP3 Grease
M.O.Q : 1 tonne Shipping terms: CIF Shipped from: Indonesia Reduces viscosity and promotes uniform flow. Best for use in EPDM mould fouling reduction. Equivalent to: i) D.O.G Deoflow A ii) Struktol WB 42 iii) Performance Ultralube 420
For use of polar rubber; FKM, ACM, CSM, Halo IIR, ECO and millable urethane. Decreases inter-molecular friction. Equivalent to: i) D.O.G Deoflow 821 ii) Struktol WB 222 iii) Performance Ultralube 220
Eni has developed a new lubricants food grade line that meets the needs of food, pharmaceutical, cosmetics and pet food industry. The utilization of Eni lubricants "food grade" allows to: minimize the food contamination risk in all stages of production, as required by HACCP protocol (Hazard Analysis Critical Control Point), meet the lubrication requirements for any machinery utilized during production processes, guarantee high quality standards level of products, maximize the productivity.
GALX-HM1 Nano Antiwear Additive Description GALX-HM1 is an amber transparent oily liquid, formulated by nano boron carbide and high-temperature antioxidant, which is a phosphorus free, low sulfur, ashless energy-saving and anti-wear additive. It has outstanding anti-wear property and good friction-reduction property. Application Used to blend low-phosphorus, low-ash internal combustion engine oils and additive package as antiwear additive Used to blend transaxle oils, manual transmission oils, industrial gear oils, worm gear oils and their additive packages Used to prepare antiwear and ash-free anti-wear hydraulic oils combined with phosphate ester Used as antiwear and friction-reduction car care products in bottle packages, more effective for energy saving and oil saving in finished gear oils and engine oils Recommended Dosage Used in engine oils:1.5%-2.5% Used in vehicle gear oils:2.0%-3.0% Used in industrial gear oils:1.2%-1.8% Used in antiwear hydraulic oils:0.6%-1.0% Characteristics Item Standard Value Test Method Density(20),kg/m3 1280-1380 GB/T1884 Kinematic Viscosity(100), kg/m3 7-12 GB/T265 Flash Point,(COC), 180-200 GB/T267 Pour Point, -10max GB/T3535 B, % 0.02-0.04 SH/T0227 Average friction coefficient/f 0.07-0.08 SH/T0762 wear scar diameter/mm 0.4-0.45 SH/T0189 Pb/N 920-1050 GB/T3142 Storage Please refer to SH/T0164 standard when stored, loaded and unloaded, oil blending. Keep the temperature not higher than 75°C. For long-term storage, the suggested temperature is lower than 45°C.
We are supplier for all type of lubricant oil & fluid with best quality (made in malaysia). Among our product: -passenger car motor oil -diesel engine oil -automotive gear oil -motorcycle engine oil -automatic transmission oil -hydraulic fluid -industrial gear oil -industrial compressor oil -industrial turbine & gas turbine oil -universal transmission fluid -marine oil -transformer oil -greases -milky soluble cutting fluid -forging oil -tapping oil -grinding fluid
Overview: Zro-45 polishing lubricant oil is surface treatment material composed by a special vegetable oil , machine oil and anti-rust agent, anti-friction agent and nano-materials. It can improve the anti-rust performance and smoothness of welding. Due to the presence of nano-materials , it also has excellent performance for copper coated wire. Performance: Form: pale yellow oily liquid specific gravity: 0.91 (20 ?) Viscosity: 40cst (40 ?) ph value: 6.7 moisture: 0.3 max Application: It can be used for all drawing passes and will form thin film under in a bad cooling conditionn, it may appear coke, drawing speed of crude rough is 100 ~ 200m / min, while the small size of the drawing speeds is up to720 ~ 800m / min, the film is easy to clean. 1. Properties Pale yellow oily liquid Specific gravity 0.91 (20 ?) Viscosity 40cst (40 ?) Ph value of 6.7 or less moisture 0.3 Ingredients: vegetable oil, additives 2. Features It has excellent lubricity and significant anti-rust performance to the copper wire. The anti-friction agent and nano-materials make wire surface more smooth, and more smoothly for wire feeding.The materials do not contain any hazardous and noxious substances, when welding the lubricant on wire surface does not produce harmful substances. 3.Uses Polished copper or copper wire for surface coating 4.Usage Directly pour into the mould box Used in circular fashion Coating by felt jig 5. Notes: Black residue when direct drawing, may be caused by water incorporation or polishing mold too hot, remove the deposition , use the upper layer oil.
Overview: Zrd--135 lubricant is constituted of fatty acid calcium and a variety of extreme pressure agent, anti-wear agent, additives, through special process synthesis, mainly for low carbon steel wire without pickling drawing. Performance: Fatty acid content: 40%-45% color: yellow-gray Softening point: 205 ? water content: 0.4-1% Decomposition temperature: 410-440 ? size: medium particles Application: Mainly be used in phosphate, boron-treated, without pickling, used in the front pass drawing, also used in all pass drawing, film thickness, in the case of cooling is not good, possible appear coking, dry pull backward water tank can improve the quality of steel wire, reduce mold consumption.
XPT202 ZDDP zinc dialkyl dithiophosphate antioxidant and corrosion inhibitor zinc booster Product Description XPT202 is Zinc Butyl Octyl Primary Alkyl Dithiophosphate (ZDDP). This product features favorable  anti-oxidation and anti-corrosion  performance and anti-wear and extreme pressure properties. It can effectively protect engine bearings from corrosion, and prevent oil viscosity growth due to oxidation in a high temperature. The product is light in color and nice in oil solubility and additive compatibility. It can be widely adopted in various industrial lubricating oils such as gear oil and hydraulic oil. Combined with detergents and dispersants, the product can be used to produce all grades engine oils. The dosage is 0.5%-3.0%. ZDDP CAS No. 68649-42-3 Parameters  Item Typical Value Appearance Amber transparent liquid Color Number 0.8 Flash Point (COC), â?? 195 Kinematic Viscosity(100â??), mm2/s 11.6 Density(20â??) ,kg/m3 1092 S Content, m% 15.7 P Content, m% 7.6 Zn Content, m% 9.0 PH Value 5.9 Water Content,� m% 0.01 Application 1. Primarily used for various internal combustion engine oils 2. Zinc booster used for gear oils, hydraulic oils, bearing oils, rail oils and metalworking oils; but it can not be used with silver parts. 3. The dosage: 0.5-3.0%  Iron Drum:  Usually 180-200kg; IBC Tank:  Around 1147kg;  ISO Tank:  20Ton
GOLD ROTO SPIN series oils are range of high quality spindle lubricants for use on modern textile machines. Manufactured from the highest quality base stocks and ashless additives, it reduces spindle wear, protects against rust and may be easily removed by washing textile contamination occurs.
Manufactured in the United Kingdom Oil UK Packs available 1L, 4L, 5L, 20L, 20L tinplate generic, 20L tinplate, 60L, 200L and 1,000L IBC
HYDRAULIC OILS Turbine Oil General Purpose Oil Circulating Oils Compressor Oils Heat Transfer Fluids Soluble cutting Oil SCOPE Textron AW Hydraulic oils are premium quality anti-oxidant, anti-wear, anti-rust hydraulic oils for industrial hydraulic applications blended with selected high quality base stocks and special additives to give excellent dimulsibility, superior oxidation and thermal stability and excellent load carrying capacity. Main Benefits Excellent oxidation & thermal stability. Excellent load carrying capacity. Outstanding anti-wear performance. Superior filterability and good water separation. Low friction and hydraulic stability. Excellent air release and antifoam properties Application SCOPE Textron AW Hydraulic Oils can be used in all Hydraulic and fluid power transmission system suitable for a wide range of other industrial applications.
We are looking for lubricants importers/.dealers and distributors across the nations... we work based on standard formulations from SOCIETY OF AUTOMOTIVE ENGINEERS AND AMERICAN PETROLEUM INSTIUTUE THAT SAE AND API.
TBN400 Petroleum Lubricant Additives Synthetic Calcium Sulfonate With heavy alkyl benzene sulfonic acid as a main raw material, super high-based synthetic calcium sulfonate is prepared by neutralization and super high alkalization reaction. The product has excellent alkaline storage property, good oil solubility and strong acid neutralization capability, and it can immediately neutralize organic aid and inorganic aid in oil; meanwhile it also has excellent high-temperature detergency and thermal stability. It is a preferred addictive for preparing over-based marine cylinder oil. Product quality characteristics and test method Items Indices Appearance Red-brown viscous liquid Density( 20C),kg/m3 1150-1250 Kinematic viscosity,( 100C) mm2/s 180 Flash point(open cup),C 180 Total base number, mgKOH/g 395 Calcium content,% 14 Sulfur content,% 1.2 Water content,% 0.2 Machinery impurities,% 0.1 Iron Drum: Usually 180-200kg; IBC Tank: Around 1147kg; ISO Tank: 20Ton; (The volume depends on different Density of different products) Shelf life: two years
Features: Multi-layered fullerene shaped nanospheres helps to polish the internal parts of the engine to reduce high load level friction and wear. Provides stable oil film between sliding surfaces. Provides reliable engine operation in a wide temperature range. Rust/corrosion protection of the engine parts. Cleaning the sludge from engine parts. Prevention of foaming. With good lubricity less fuel is consumed, and the life of the engine/machinery extended. Applications: Can be used in engine oils, gear oils, other power-transmitting fluids, load-bearing greases, and metal working fluids, in high-temperature and high-pressure applications.
Origin:-Germany Uses:- To meet the set industry standard, we are extremely engaged in offering a premium quality PVC Lubricant (LOXIOL G 12) that is processed in accordance with the market standards. Origin : Emery Oleochemicals, Germany Packing : 25/kgs Bag Chemical Characteristic : Low adhesive, high softening point and good hardness with stable chemical characteristics of good heat stability, good dispersion performance, no poison, no frost and mucous membrane; as an ideal interior & exterior lubricant, it can be used as a substitute for liquid paraffin, natural paraffin etc.
Origin:-Germany Uses:- To meet the set industry standard, we are extremely engaged in offering a premium quality PVC Lubricant (LOXIOL G 12) that is processed in accordance with the market standards. Origin : Emery Oleochemicals, Germany Packing : 25/kgs Bag Chemical Characteristic : Low adhesive, high softening point and good hardness with stable chemical characteristics of good heat stability, good dispersion performance, no poison, no frost and mucous membrane; as an ideal interior & exterior lubricant, it can be used as a substitute for liquid paraffin, natural paraffin etc.
Braided asbestos yarns impregnated with PTFE dispersion,treated with pure minenal oil . It is a flexible, resilient, homogeneous and compact packing . can be utilized on stainless steel or chromed shafts in the presence of high peripheral speeds without etching them. Its suitable for alkalis, thinned inorganic acids, water, steam, organic gases, solutions of every kind. It can be utilized in paper mills, dyeing plant, foodstuff, pharmaceutical and oenologic industries. Spec:3.0mm - 50mm
PTFE lubricated ultrafine powder Lubricating powder is treated with irradiation for crushing treatment, which is easy to disperse in rubber, thermoset plastic, thermoplastic, grease, ink and oil, and it is not agglutinate, non - forming, and improves its lubricity and reduces wear, friction.