Low risk- medical, dental, procedures, chemotherapy drugs, pathology lab and food handling. Coated with FDA recognized skin protectant. Clinically proven to help protect and moisturize from dry and irritated skin from prolonged glove use and hand wash. Material: Nitrile Color: Dawn Blue, White Finger Thickness: 0.09 Mm ± 0.02 Mm Palm Thickness: 0.07 Mm ± 0.02 Mm Length : 230 Powder Content: Powder Free
Shear Blade Conventional Ironworker: High rake angle shear blade distorts the finished part (poor quality); Most manufacturers provide only two blade edges (shorter life/more expensive). Piranha Ironworker: Low rake angle shear blade results in flatter parts (better quality); Piranha provides four shear edges on each blade (longer life/less expensive).
Leafless Hanging Neck Fan * Release your hands, wearable fan * 360-degree surrounding wind, gentle wind, * 62 surround the air outlet, do not blow directly, only healthy. * Left and right twin-turbine blast design, reduce air fluctuations, energy-saving and quieter * Three-speed wind * The angle of the fuselage can be twisted at will * Only 260g weight
Almandine Garnet is the heaviest and hardest of all abrasives in this world. � Garnet is a relatively hard mineral with a hardness that ranges between 6.5 and 7.5 on the Mohs scale. It could withstand in highest cutting speed and maintain low dust levels, with its crystalline shape giving a fast cutting action and longer life span. Garnet has served primarily for its many dimension applications i.e. blast media, water jet cutting, coated abrasives, surface preparation, grinding media, water filtration and so on.
Almandine Garnet is the heaviest and hardest of all abrasives in this world. Garnet is a relatively hard mineral with a hardness that ranges between 6.5 and 7.5 on the Mohs scale. It could withstand in highest cutting speed and maintain low dust levels, with its crystalline shape giving a fast cutting action and longer life span. Garnet has served primarily for its many dimension applications i.e. blast media, water jet cutting, coated abrasives, surface preparation, grinding media, water filtration and so on.
Almandine Garnet is the heaviest and hardest of all abrasives in this world. Garnet is a relatively hard mineral with a hardness that ranges between 6.5 and 7.5 on the Mohs scale. It could withstand in highest cutting speed and maintain low dust levels, with its crystalline shape giving a fast cutting action and longer life span. Garnet has served primarily for its many dimension applications i.e. blast media, water jet cutting, coated abrasives, surface preparation, grinding media, water filtration and so on.
Almandine Garnet is the heaviest and hardest of all abrasives in this world. � Garnet is a relatively hard mineral with a hardness that ranges between 6.5 and 7.5 on the Mohs scale. It could withstand in highest cutting speed and maintain low dust levels, with its crystalline shape giving a fast cutting action and longer life span. Garnet has served primarily for its many dimension applications i.e. blast media, water jet cutting, coated abrasives, surface preparation, grinding media, water filtration and so on.
24 pages broadsheet newspaper printing machine is widely accepted machine. Available in various cut offs and speed, this machine offers highest ROI and print quality considering low margins in newspaper printing. 24 pages newspaper printing machine can be fitted with following options 48 pages tabloid option. Auto reel changer. Auto register control. Spray dampening. UV. Stacker. Balloon former. Ink pumping system.
BRAND : FUJI TEMPERATURE CONTROLLER PXF9 , PXF4, PXF5, PXF4 SOCKET TYPE ALL SERIES AVAILABLE . Precise control: Achieved a processing speed of 50 ms which is 10 times faster than conventional models. Reading accuracy is also improved from �±0.5% to �±0.2%*. *Comparison under 0â??850�°C range, with RTD. See the Data Sheet for details. Easy-to-see display MVA LCD* which offers high contrast and wide viewing angle Process value is displayed in white *Minimal translucent type vertical alignment liquid crystal display Practical options Simple watt-hour metering function: allows you to monitor energy consumption Operating days alarm: tells you the appropriate time for maintenance work Most compact class in industry 36% smaller (than conventional models) and 58-mm depth shallow body helps downsize your facility Universal input You can use any input among RTD, thermocouples, voltage, current, and mV. The set-up for input change is very easy, only requires parameter change. This allows reduction of maintenance parts
A globe valve is a linear motion valve used to stop, start, and regulate the fluid flow. The globe valve disk can be removed entirely from the flow path, or it can completely close the flow path. During the opening and closing of the valve, the disc moves perpendicularly to the seat. Leakage from the globe valve seat is less as compared to the gate valve, mainly due to right angle contact between the disc and seat ring, which allows tighter seal between seats the disk. Globe valves consist of a movable disk-type element and a stationary ring seat in a generally spherical body. The valve stem moves a globe plug relative to the valve seat. The globe plug can be at any position between fully opened and fully closed to control flow through the valve. The globe and seat construction gives the valve good flow regulation characteristics. Turbulent flow past the seat and plug, when the valve is open, results in a relatively high pressure drop, limited flow capacity, and low recovery.
EkoFreez® is organic plant antifreez, unique preparation for reducing harmful effects of early spring/autumn frost. Because of high content of micro-elements B, Mn and Zn, it can be used as fertilizer for potatoes, sugar beat, carrots and other similar plants. EkoFreez used in solution prepared of 1 liter mixed with 150 liters of water (or 0,75% concentration), speeds-up photosynthesis on lower temperatures. EkoFreez® should be applied 3-4 days prior to low temperatures. It can be used in vegetable production or orchards. EkoFreez® is liquid organic fertilizer, it has nutritional values so therefore it has double effects on plants: it protects them and fertilizes. If applied in autumn, it reduces the leaves loses, and increases the resistance of plants when blossom when temperatures get too high or too low. Applied at the beginning of vegetation and during the buds, flourishing and developing the fruits, it increases the resistance of plants to late spring frosts and cold periods and applied in the late stage of leaves forming, it increases the resistance to early autumn frosts and cold weather. Organic base: chicken compost PET bottles 1 lit, barrels 10 lit
Corrugated Sheet Roofing, Corrugations Corrugated sheet roofing material is widely available and easy to use. Corrugations should run in a straight line between the highest and lowest points, and at a right angle to the purlins (the intermediate supports). The overlaps (ends and sides) depends upon the sloop of the roof. Purlin spacing should suit the end laps required for the size of sheet to be used. Sheets should be laid so that the side overlaps are directed away from the prevailing wind. All purlins should be in one plane and parallel to each other. They should be properly anchored to the supporting superstructure. Ends of all sheets should be supported by purlins. The free overhang at the eaves should not exceed 300 mm. 8 mm diameter (min) hook bolts, crank bolts or coach screws, should be inserted through 10 mm diameter drilled holes.- NEVER PUNCHED - in the crown of the corrugations. Nuts or screws should be tightened lightly at first, and then tightened again when a dozen or more sheets have been laid. At intermediate purlins, they should not be tightened in an attempt to make the sheet rest on the purlins. A cat-ladder or roof board should always be used when working on a roof for safety of the person and to avoid damage to the roofing material. Installation of corrugated roof sheeting These notes are intended to cover the use and installation of corrugated roof sheets such as PVC, other plastics and bitumen fibre sheets. Although very different as materials and where they are used, they do have similar properties regarding flexibility and weight. One advantage of these corrugated materials is that it is far more rigid than a flat sheet of a similar type and thickness. This enables considerable savings in both weight and cost, it also makes the sheet relatively easy to handle. Generally all these types of material can be used either as roofing or vertical cladding. Most of these sheeting tends to be susceptible to condensation when used as cladding for outhouses etc. - being relatively thin they tend to have low thermal insulation properties. Condensation will be reduced if the interior of the structure is well ventilated.
expanded polystyrene foam panel Our company is providing EPS panels that are insulated applications, which are food processing areas, roofing, wall cladding, partition, walk on ceilings, prefabricated shelters, accommodation shelters, health centers and many more. The panels are manufactured through a computerized continuous line and with pre-painted galvanized steel sheets (PPGS) and pre painted galvalume steel sheets. The density of expanded polystyrene foam (EPS) sandwiched between two fascias is 8-30 Kg/ M3. Construction pre-engineered & fewer components, internationally accepted & meets the building code Higher energy savings due to low thermal conductivity Flexibility in design and choosing various options on fascia of panels & colors All weather proof construction & Maintenance free Modular in nature and pre-engineered for precision and simplified construction Options available with various finishes like PPGS / PPGS and PPGL / PPGL Walls of different height, yet sturdy and strong construction Light weight panels which is easy to lift and erect at any height inside the plant or any other place Frameless construction and ease of design, supply and erect for any types of construction Insulated Panels and saves the energy These insulated panels gives long lasting value with controlled quality Accuracy & speed of construction and caters for better functionality & application
Our company is providing eps panels that are insulated applications, which are food processing areas, roofing, wall cladding, partition, walk on ceilings, prefabricated shelters, accommodation shelters, health centers and many more. The panels are manufactured through a computerized continuous line and with pre-painted galvanized steel sheets (ppgs) and pre painted galvalume steel sheets. The density of expanded polystyrene foam (eps) sandwiched between two fascias is 8-30 kg/ m3. Construction pre-engineered & fewer components, internationally accepted & meets the building code Higher energy savings due to low thermal conductivity Flexibility in design and choosing various options on fascia of panels & colors All weather proof construction & maintenance free Modular in nature and pre-engineered for precision and simplified construction Options available with various finishes like ppgs / ppgs and ppgl / ppgl Walls of different height, yet sturdy and strong construction Light weight panels which is easy to lift and erect at any height inside the plant or any other place Frameless construction and ease of design, supply and erect for any types of construction Insulated panels and saves the energy These insulated panels gives long lasting value with controlled quality Accuracy & speed of construction and caters for better functionality & application
Product MPN MPN 0296B002 Key Features Image Sensor Type CMOS Resolution 13.3 Megapixel Camera Type SLR/Professional Lens Interchangeable Lens Interchangeable Lenses Digital Zoom Without Digital Zoom Focus Type Autofocus & Manual Focus Image Quality Camera Resolution 13.3 Megapixel Exposure Control Shutter Speed 30 - 1/8000 sec White Balance Auto Manual Daylight / Sunny (Preset) Cloudy (Preset) Fluorescent (Preset) Tungsten (Preset) Shade (Preset) Sunset (Preset) Flash (Preset) Frames Per Second 3 Frames Storage Memory Type CompactFlash Card Type I CompactFlash Card Type II Compression Modes Fine Normal Uncompressed Compression Type JPEG Raw Image File Size (High Res.) 12.9 MB (10 images on 128MB card) File Size (Low Res.) 1 MB (about 128 images on 128MB card) Flash ISO Speeds Auto 50 100 400 1600 3200 Flash Type External Viewfinder / Display Viewfinder Digital LCD Panel With LCD Panel LCD Panel Size 2.5 in. LCD Screen Resolution 230,000 pixels LCD Protected Position Without LCD Protected Position Interfaces Interface Type USB 2.0 Video Interface Video Out Power Supply Battery Type Proprietary Lithium Battery Life 800 Images Included Features Self Timer 2 Sec. 10 Sec. Built-in Microphone Without Built-in Microphone System Requirements Operating System Apple Mac OS X Microsoft Windows 2000 Microsoft Windows 98SE Microsoft Windows ME Microsoft Windows XP Dimensions Width 6 in. Depth 3 in. Height 4.4 in. Weight 1.79 lb. Miscellaneous Included Accessories Lithium Battery Remote Control
EPM A2, B1 & Non-FR. At EPM's purpose-built high speed production line using the most advanced technology in the industry and covering an area of more than 50,000 square meters, our multi-million dollar state-of-the-art facility has an annual capacity to produce in excess of 60 million square meters(600 Million Square Feet) of Aluminium Composite Panels using the very best raw materials from internationally renowned suppliers. EPM A2 ACP EPM's A2 Fire-Retardant ACP core consists of well-balanced combination of combustible (LDPE) and non-combustible (Mg (OH)2) in the core, will prove resistance to fire thereby delaying combustion, and declining further spread. Where an A2 SCP core should be 90% of non-combustible proportion with 10% balanced mix of LDPE and other supplements. EPM FR-B1 ACP EPM's FR-B1 is composed of a modified mineral-based core which consists of non-combustible mineral (Magnesium Hydroxide) and small quantity of low-density polyethylene with a composition of 73% of mineral plus 25% of LDPE and 2% of other additives sandwiched in two aluminum skins. EPM NON-FR ACP EPM's Non-Fire Retardant ACP core is made up of 100% LDPE, Low-density polyethylene (Linear or Recycled) which is a plastic based core, a petroleum by-product and of course 100% combustible and contribute to increase the intensity of fire propagation when they burn and changes a small fire to a big disaster. EPM ACP SPECIFICATIONS Panel Measurements Length 2440mm, 3200mm, 3600mm, up to 6000mm Panel Thickness 3mm, 4mm, 5mm, 6mm Aluminum Skin Thickness 5mm, 0.4mm, 0.3mm Weight 3mm=4.5kg/m2: 4mm=5.5kg/m2 6mm=7.3kg/m2 (Polyethylene Core) 3mm=5.8kg/m2: 4mm=7.6kg/m2 6mm=10kg/m2 (Modified Mineral Core)
Dental instruments, dental handpiece, high speed turbine handpiece, low speed dental handpiece, heater, tubes for dental chair.
Dental instruments, dental handpiece, high speed turbine handpiece, low speed dental handpiece, heater, tubes for dental chair.
Dental instruments, dental handpiece, high speed turbine handpiece, low speed dental handpiece, heater, tubes for dental chair.
Standard configuration High speed handpiece (4holes)------2sets Low speed handpiece (4holes)-------1set 3-way syringe (cold and hot)-------2sets High suction--------------------1set Saliva ejector------------------1set Automatic cup filler--------------1set Operation light-----------------1set Integral cuspidor----------------1set Clean water system--------------1set Motor-driven dental chair---------1set Operator stool-----------------1set Specfications Voltage ~220v 50hz Water pressure 200~400kpa Air pressure 550~800kpa Gross weight 330kg Option Air compressor Ultrasonic scaler Led curing light
