Commodity: Aluminium scrap, grade: UBC Quantity: 600mt Price: $1140/mt CFR CY Any Main Port iNDIA Load Port: Any main port Latvia, Lithuania, Poland Payment: Letter of Credit at Sight 100% or TT
Copper metal, copper wire, copper cathode, occ scrap, pvc window scrap, pvc medical tube scrap, ldpe bale, hdpe bale, cast iron scrap, aluminium wire scrap, copper wire scrap, foam scrap, bic lighter, coffee machine, cpu scrap, almond, sunflower oil.
Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
Size: All sizes Type: All types High-protein low-fat food; Shape : Tube, Oval, Sheet, And Fiber Has a tonic value; Dried under sunshine No oil, no unknown smell 20cm x 20cm x 10cm (7.87in x 7.87in x 3.94in) Age group : From child to old Shelf Life : Normal Drying Process : Cleaned and dried under sunshine
Size: All sizes Type: All types High-protein low-fat food; Shape : Tube, Oval, Sheet, And Fiber Has a tonic value; Dried under sunshine No oil, no unknown smell 20cm x 20cm x 10cm (7.87in x 7.87in x 3.94in) Age group : From child to old Shelf Life : Normal Drying Process : Cleaned and dried under sunshine
Aluminium composite panels consists of a thermoplastic polyethylene core that is sandwiched between to outer flat aluminium panels. The polyethylene core is bonded between the two aluminium sheets providing a very lightweight, flat, smooth and strong rigid sheet. The aluminium composite sheets can be coated with a number of coatings from pvdf or polyester paint depending on the customer requirement or process. Aluminium composites can also be produced in a wide range of colours including metallic’s and patterns that resemble woods and marbles. Pvdf and polyester aluminium composites can be found in a range of applications from building claddings to signage as a replacement to heavier and expensive substrates. Plastic wrap
Technique Parameter Oxygen flow rate .. 1L-5L Oxygen concentration .. 93% + 3% Rated voltage / Power .. AC220+V 22V ,50Hz + 1Hz Material .. Plastic Oxygen concentration .. 0.5-3L/min + 90% Flow fluctuation .. 0.7L/min Atomization amount .. + 0.2ml/min environment temperature .. 5-40 humidity range .. 80% Atmospheric pressure range .86kpa -- 106kpa Size .. L448*W245*H492 Weight .. 14.5g 1. Headset type components (optional) 2. Nasal tube assembly (optional) 3. Atomizer assembly
Technique Parameter Oxygen flow rate .. 1L-5L Oxygen concentration .. 93% + 3% Rated voltage / Power .. AC220V + 22V ,50Hz + 1Hz Material .. Plastic Oxygen concentration .. 0.5-3L/min 90% Flow fluctuation .. 0.7L/min Atomization amount .. 0.2ml/min environment temperature .. 5-40 humidity range .. 80% Atmospheric pressure range .. 86kpa -- 106kpa Size .. L448*W245*H492 Weight .. 14.5g 1. Headset type components (optional) 2. Nasal tube assembly (optional) 3. Atomizer assembly
Skim Milk Powder is produced from pasteurized full-fat cow's milk, by spray drying Immediate packaging is approved for direct food packaging in accordance with Regulation (EC) 1935/2004 Energy value 1491kJ / 351kcal, protein 34g, carbohydrates 51g, fat 1.25g - Contents of metals - Lead (Pb) - max 0,1 mg/kg - Aflatoksin M1 - max 0,050 µg/kg - Antibiotics - negative - Total Plate count
Skim Milk Powder is produced from pasteurized full-fat cow's milk, by spray drying Immediate packaging is approved for direct food packaging in accordance with Regulation (EC) 1935/2004 Energy value 1491kJ / 351kcal, protein 34g, carbohydrates 51g, fat 1.25g - Contents of metals - Lead (Pb) - max 0,1 mg/kg - Aflatoksin M1 - max 0,050 µg/kg - Antibiotics - negative - Total Plate count
(LME standards) Standard Cu Cathode-1, purity 99, 97-99, 99 %Dimension: 914 mm x 914 mm x 12 mm (LME standards) Copper (Cu) min% 99.99% Other materials may be present which are described below: Oxygen O2 -- Sulfur S 4 PPM Iron Fe 2 PPM Silver(Argent 10 PPM Lead Pb 0.2 PPM Nickel Ni 0.2 PPM Selenium Se 0.3 PPM Antimony Sb 0.1 PPM Silica Si 0.3 PPM Cobalt Co 0.2 PPM Arsenic As 0.1 PPM Bismuth Bi 0.1 PPM Manganese Mn 0.1 PPM Tellurium Te 0.05 PPM Aluminum Al 0.5 PPM Magnesium Mg 0.4 PPM Zinc Zn 0.4 PPM
(LME standards) Standard Cu Cathode-1, purity 99, 97-99, 99 %Dimension: 914 mm x 914 mm x 12 mm (LME standards) Copper (Cu) min% 99.99% Other materials may be present which are described below: Oxygen O2 -- Sulfur S 4 PPM Iron Fe 2 PPM Silver(Argent 10 PPM Lead Pb 0.2 PPM Nickel Ni 0.2 PPM Selenium Se 0.3 PPM Antimony Sb 0.1 PPM Silica Si 0.3 PPM Cobalt Co 0.2 PPM Arsenic As 0.1 PPM Bismuth Bi 0.1 PPM Manganese Mn 0.1 PPM Tellurium Te 0.05 PPM Aluminum Al 0.5 PPM Magnesium Mg 0.4 PPM Zinc Zn 0.4 PPM
Stearic Acid CAS No.: 57-11-4 Chemical Formula: C18H36O2 CH3(CH2)16COOH Molecular Weight: 284.48 Properties: Pure product is small pieces of wax crystals in white with slightly luster Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.
Stearic Acid CAS No.: 57-11-4 Chemical Formula: C18H36O2 CH3(CH2)16COOH Molecular Weight: 284.48 Properties: Pure product is small pieces of wax crystals in white with slightly luster Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.
1. Our low sugar instant dry yeast is a kind of baker's instant dry yeast. 2. Quality Product with good effects 3. Our low sugar instant dry yeast is granular and yellowish. Its moisture is not more than 5.5%. Its fermentation ability varies from 500 to 700ml/h and its sugar dosage is between 0-7%. Our low sugar instant dry yeast can be kept for two years. 4. Our low sugar instant dry yeast is packaged in vacuumed aluminum foil sachets then put into a carton. Chemical And Physical Standard Colour-------------------Yellowish brown to light yellow Dry matter----------------min. 94.5% Moisture-----------------max. 5.5% Fermentation-------------min.650mL/hr(CO2) Retention Rate-----------min.80% Microbiological Standard Coliforms---------------max. 90MPN/100g Salmonella--------------absent in 25g Shigella----------------absent in 25g Staphylococcus aureus----absent in 25g Packing Types of yeast 10g low sugar instant dry yeast 11g low sugar instant dry yeast 12g low sugar instant dry yeast 100g low sugar instant dry yeast 125g low sugar instant dry yeast 400g low sugar instant dry yeast 450g low sugar instant dry yeast 500g low sugar instant dry yeast 5kg low sugar instant dry yeast
1. Our low sugar instant dry yeast is a kind of baker's instant dry yeast. 2. Quality Product with good effects 3. Our low sugar instant dry yeast is granular and yellowish. Its moisture is not more than 5.5%. Its fermentation ability varies from 500 to 700ml/h and its sugar dosage is between 0-7%. Our low sugar instant dry yeast can be kept for two years. 4. Our low sugar instant dry yeast is packaged in vacuumed aluminum foil sachets then put into a carton. Chemical And Physical Standard Colour-------------------Yellowish brown to light yellow Dry matter----------------min. 94.5% Moisture-----------------max. 5.5% Fermentation-------------min.650mL/hr(CO2) Retention Rate-----------min.80% Microbiological Standard Coliforms---------------max. 90MPN/100g Salmonella--------------absent in 25g Shigella----------------absent in 25g Staphylococcus aureus----absent in 25g Packing Types of yeast 10g low sugar instant dry yeast 11g low sugar instant dry yeast 12g low sugar instant dry yeast 100g low sugar instant dry yeast 125g low sugar instant dry yeast 400g low sugar instant dry yeast 450g low sugar instant dry yeast 500g low sugar instant dry yeast 5kg low sugar instant dry yeast