POE plastic is a thermoplastic elastomer in situ polymerization of ethylene and octene using metallocene catalyst. Its characteristics are as follows : (1) the soft crimped chain structure of octene and the crystalline ethylene chain as physical cross-linking point, which makes it both excellent toughness and good processability. (2) There is no unsaturated double bond in the molecular structure of POE plastic, which has excellent aging resistance. (3)POE plastic has narrow molecular weight distribution and good compatibility with polyolefin. (4) Good fluidity can improve the dispersion effect of filler, but also improve the strength of fusion mark products.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Thermoplastic Polyolefin (TPO) elastomers is a combination of PP and another polyolefin that have been modified to provide better ductility and impact resistance, its ease of processing, lightweight nature, and chemical resistance of PP, TPO compounds can be formulated for increase UV weathering & Scratch resistance when needed Properties Good Dimension Stability High Impact Strength Good Heat Aging Properties Low Density Good Chemical Resistance Good Processability Low Cost Extensive Compounding capabilities Good Recyclability Non-hygroscopic, pre-drying is not necessary Coloured grades available Typical Applications Exterior Automotive parts Bumpers, Bumper Pannels & Parts, Air Intake Ducts, Grilles etc.Interior �¢?? Instrument Pannel, Door Pannel, Control Knobs Industrial products- gasket & seal, weather striping etc. Appliance and housewares Products Sporting goods Personal Care goods Wire and cable Flexible cord, welding cable jacket , automotive wire & cable Health care Specification missing -take from website Specification Hardness Set(ISO 868) (Shore A-D) 50 �??-60 D Density (g/cm3) 0.88 1.12 Compression(Set) Very Good Tensile Set (ISO 527) 10 kg/cm3 - 30 kg/cm3 Tear Set (ISO 34) 30 kg/cm3 - 50 kg/cm3 Elongation Set (ISO 527) (%) 400 - 1000 Working Temp. Max. (C) 100 Working Temp. Min.(C) -40 Adhesion PP/ABS/HIPS/SAN/PC/NYLON Solvent Resistance Medium Motor Oil Resistance Medium Acid-Base Resistance Excellent UV-Ozone Stability Excellent Wide hardness range Does not require vulcanisation-quire higher saving on the processing costs Remains flexible at low temperatures High temperature resistance Electrical insulator with very low conductivity Has grades with very low compression set Grades having excellent abrasion resistance Excellent tear resistance 100% recyclable PVC free Resistance to solvents Resistance to oil Resistance to acids bases and detergents Resistance to UV and ozone Resistance to bacterial and fungus growth Has low toxic potential, with many grades conforming with FDA regulations Halogen free flame retardancy (VO-V1-V2) Colored grades available Allows direct colouring during processing by utilizing PP or PE based color 2-shot molding onto wide range of plasics Suitable for co-extrusion process
polyolefin elastomer grafted maleic anhydride used as super low temerature toughener for PA6 PA66
Product Name: SODIUM HYALURONATE CROSSPOLYMER INCI Name: SODIUM HYALURONATE CROSSPOLYMER Other name: Hyaluronic Acid Elastomer Appearance: Colorless to slight yellow Recommended dosage: 1%-10% Application: Skin care, hair care products, etc. CAS: 105524-32-1 Package: 1KG, 5KG Supplier: ZHENYIBIO SODIUM HYALURONATE CROSSPOLYMER is skin conditioner and also an acidic mucopolysaccharide. It exists in the corneal skin and can absorb 1,000 times its own weight in water.Thus it can retain skin moisture and prevent moisture loss through the epidermis. After using the skin, it will not feel dry and increase luster. It can improve skin nutrition metabolism, make the skin soft, smooth, wrinkle, increase elasticity, and prevent aging. It is a good transdermal absorption enhancer while moisturizing. Used in conjunction with other nutrients, it can play a more ideal effect of promoting nutrient absorption.
Product Name:POF shrink film wrap Thickness:From 8mic-38mic / customized Width:From 150-3000mm/customized Material:100% virgin polyolefin material Transparency:High Clear and High Transparent Colors:From 1 to 8 colors/ customized Other customized service:Size; Colors;LOGO; Packing;OEM etc. Modes of packing:Packed in standard cartons Finishing Time:
Product Name:POF shrink film wrap Thickness:From 8mic-38mic / customized Width:From 150-3000mm/customized Material:100% virgin polyolefin material Transparency:High Clear and High Transparent Colors:From 1 to 8 colors/ customized Other customized service:Size; Colors;LOGO; Packing;OEM etc. Modes of packing:Packed in standard cartons Finishing Time:
Product Name:POF shrink film wrap Thickness:From 8mic-38mic / customized Width:From 150-3000mm/customized Material:100% virgin polyolefin material Transparency:High Clear and High Transparent Colors:From 1 to 8 colors/ customized Other customized service:Size; Colors;LOGO; Packing;OEM etc. Modes of packing:Packed in standard cartons Finishing Time:
Product Name:POF shrink film wrap Thickness:From 8mic-38mic / customized Width:From 150-3000mm/customized Material:100% virgin polyolefin material Transparency:High Clear and High Transparent Colors:From 1 to 8 colors/ customized Other customized service:Size; Colors;LOGO; Packing;OEM etc. Modes of packing:Packed in standard cartons Finishing Time:
Product Name:POF shrink film wrap Thickness:From 8mic-38mic / customized Width:From 150-3000mm/customized Material:100% virgin polyolefin material Transparency:High Clear and High Transparent Colors:From 1 to 8 colors/ customized Other customized service:Size; Colors;LOGO; Packing;OEM etc. Modes of packing:Packed in standard cartons Finishing Time:
Product Name:POF shrink film wrap Thickness:From 8mic-38mic / customized Width:From 150-3000mm/customized Material:100% virgin polyolefin material Transparency:High Clear and High Transparent Colors:From 1 to 8 colors/ customized Other customized service:Size; Colors;LOGO; Packing;OEM etc. Modes of packing:Packed in standard cartons Finishing Time:
We are one of the highest manufacturers and suppliers of PET Flakes with much shipping experience worldwide .Our markets include ASIA, EUROPE,AMERICA, UAE, MIDDLE EAST, HONGKONG AND OTHER COUNTRIES. We supply Hot Washed Clear / Transparent PET Flake supplying of excellent quality range of pet flakes that include hot washed pet bottle flake, pet sheet flakes, washed pet bottle flake and unwashed pet bottle flake. widely used for making plastic bottles, these pet flakes are free from impurities and widely appreciated for their attributes like crystal clear transparency and low-melting point. our clients can avail bulk quantities of these pet flakes at very affordable rates from us.our prices are highly competitive and quality of the product is the best. we always supply worldwide with fast and accurate delivery. product name: pet bottle scrap flakes white viscosity: 0.70 0.80 dl/g melting index: 35 ± 5 g/10 min melting temperature: 248 252 humidity (%): < 1% ph: 7 8 density: 0,25 0,4 g/cm3 polyolefin: 50 ppm paper and fiber: 20 ppm metal: 20 ppm pet with glue: 30 ppm other admixtures: 30 ppm size: 10-12 mm. flake size 8mm: 1 % flake size 2-4mm: 20 % flake size 2mm: 1 % process : hot washed. moisture : 0.5 % max. pvc content : 0.01-0.03 %. i.v. : 0.7 - 0.85. m.p. : 255 +/- 5 c. color availability : clear /crystal foreign materials : 0.5 % max. bulk density: ~450kg/m3 hs code: 3907 6000 Quantity : 27 ton / 40 FT FCL Kindly send us inquiry with your full contact details email address and phone number/whatsapp for faster and timely response .
Material: POE ( Polyolefin Elastomer ) New Eco Friendly , No latex PVC Free, Recyclable , Lightweight Cnfmed to safely regulation Phthalates, RoHs, PAHs and Azo dyes. Size.: 4,5, 6, 10mm x 60cm x 180cm Color : Avaliable color choose
Epichlorohydrin is a highly reactive electrophilic compound and is used in the production of glycerol, plastics, epoxy glues and resins, epoxy diluents and elastomers For specification, price and other details please contact us.
Epichlorohydrin is a highly reactive electrophilic compound and is used in the production of glycerol, plastics, epoxy glues and resins, epoxy diluents and elastomers. For price, specification and other details please contact us
We can supply - hydroperoxides, peresters, peroxycarbonates, diacyl peroxides, ketone peroxides, dialkyl peroxides and perketals as Trigonox, Butanox, Laurox and Perkadox. Major applications are: Initiator for the production of thermoplastics such as PE, PVC and EPS. Curing agent for thermoset resins Crosslinking agent for elastomers and thermoplastics. Modifying agent for polymers such as polypropylene Reagent in pharmaceutical synthesis For price, specifications and other details please contact us.
The characteristics of the new type of ocean power cable are as follows: the cable core is composed of insulated cable core and waterproof filling rope twisted together; An inner sheath layer, an armoring layer and an outer sheath layer made of polyolefin are successively arranged on the outer core of the cable from inside to outside. With high softness and according to the characteristics of sea salt fog, strong light, wind and rain, easy to mildew. The above environmental factors are fully considered in the selection of cable raw materials. The cable has the environmental requirements of anti-salt spray, anti-ultraviolet light, anti-seawater and anti-mildew under the condition of meeting its own requirements. It is suitable for military power distribution network or industrial facilities in Marine environment. Its remarkable technical characteristics are high mechanical strength, oil resistance, mud resistance, uv resistance, bunching flame retardant/fire prevention, high temperature resistance, low temperature resistance, etc. The cable adopts the structure design of power core, communication and data transmission cable integrated.