Motorcycle three-phase rectifier Motorcycle three-phase rectifying regulator (dc 12v) A) function: switch type design with quick charging, good regulating and oil saving. It can prolong the life span of the storage battery. B)work principle: generally the motorcycle rectifying regulators use the design of short circuit discharging type. When the voltage of the storage battery reaches its rated voltage point, the control circuit of the rectifying regulator starts to work. Two scrs (silicon controlled rectifiers) simultaneously carry out the short circuit discharging to the positive and negative half-wave voltage (the scr will consume a large amount of electricity power and waste energy when it discharges short-circuitedly), and they weaken the regulating effects of the charging currents. However, the switch-type rectifying regulators use the design of switch type. When the voltage of the storage battery reaches its rated voltage point, the control circuit of the rectifying regulator starts to work. It orders the cutoff of the charging currents to achieve the regulating effects. The charging stops. The rectifying regulator itself consumes only some weak control currents. The magneto load is reduced, and the oil consumption drops. Thus the oil is saved to a degree of 20%. C)major models: s132, 133, 134, 135, 136, 137, 138, 139 S132 is applied for zy-125 (lingying). S133 is applied for gs-125 (suzuki king/lingmuwang). S134 is applied for gs-125 (suzuki king/lingmuwang). S135 is applied for gn-125 (haojue). S136 is applied for cbt-125 (honda king/bentianwang). S137 is applied for ch-125 (big shark/dasha). S138 is applied for cm-125. S139 is applied for xv-125. Note: for other motorcycle models please use different models according to different plug types.
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
AC to DC converter battery charger 150-1000VDC rectifier 120KW power supply Product Introductionï¼? SANDI AC/DC Charger is specially developed for DC chargers. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase, DC output voltage range from 150 to 1000VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger. Unique function High efficiency over the full load range, full load efficiency greater than 95% Wide output voltage range, 150-1000VDC, suitable for a wide range of Lithium or lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main featuresï¼? Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Wide input voltage range: 260~ 530Vac, adaptable to various power grid environments Three-phase AC input without neutral wire: Simplifies system design, eliminates the risk of excessive neutral current, and reduces system costs. Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Battery anti backflow: effectively protects the battery while ensuring reliable and safe operation of the system Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. RS485 interface (Optional)
Base material:solid brass, ss304, ss316 Finish:chrome, satin nickel, pearl satin,pss-polished ss, sss- satin stainless steel, pvd, gold, brass polished For use on: tempered glass thickness 6mm to 12mm glass Edges:straight egdes/beveled edges Recommended glass door weight for three hinges:heavy duty hinges: 3 hinges- 54kgs Recommended glass door weight for two hinges: heavy duty hinges: 2 hinges- 34kgs Glass cuts: square glass cut, ear mouse glass cut, round glass cut Glass door swing:90,135, 180 degree, full swing.
We supply attractive variety qualitative range of Toilet and Bathroom accessories. Features of our Shower door hinges · CNC machined precision pivot pins · Dimension 90mmx 55mm (varies from hinge to hinge) · Chrome plated, Brushed Nickel, Brass Polished, Polished Chrome, Gold Plated, Oil Rubbed Bronze. · Solid brass, Zinc as per customer choice. · Glass to Glass, wall to Glass shower door hinges. · Closing angles 90°, 135°,180°degree. · Straight edges, beveled edges, round edges. · Glass preparation- Mickey Mouse ear, square and round glass cut. · Glass thickness 8mm-12mm. · Glass door weight 35~36Kgs with two hinges. · Glass door weight 54Kgs with three hinges. · Also available in some models of shower door hinges with adjustable hinges. · Also available in auto- self closing for some models. · Also available in Bi-fold Hinge.
Study of Three Phase Half Controlled Rectifier Trainer - BRAND - VIJAYANTA, INDIA 1.Study of Three Phase Half Controlled Rectifier Trainer, Model: TPHB 303
Study of Three Phase Fully Controlled Rectifier Trainer - BRAND - VIJAYANTA, INDIA 1. Study of Three Phase Fully Controlled Rectifier Trainer, Model: TPBC 301 Optional : D.C Motor, 1 HP Capacity
Welcome to Insel Rectifiers: Your Trusted Three-Phase Rectifier Manufacturer Insel Rectifiers is synonymous with dependability and ingenuity in the realm of Three-Phase rectification. As your dedicated partner, we excel in crafting high-quality Three-Phase Rectifiers, including Three-Phase Bridge Rectifiers, Three-Phase Diode Bridge Rectifiers, and Three-Phase Full Wave Rectifiers. We take great pride in delivering meticulously engineered Three-Phase Bridge Rectifiers that set industry benchmarks. These rectifiers play a crucial role in converting alternating current (AC) into direct current (DC) with unparalleled efficiency. Our unwavering commitment to quality ensures that each Three-Phase Bridge Rectifier we manufacture meets the highest industry standards, making it the preferred choice for a diverse range of industrial applications. Efficiency Redefined with Three-Phase Diode Bridge Rectifiers Explore a new era of efficiency with our meticulously designed Three-Phase Diode Bridge Rectifiers. These cutting-edge rectifiers underscore Insel Rectifiers dedication to pushing technological boundaries. By seamlessly converting AC to DC, our diode bridge rectifiers contribute to the seamless operation of power systems. Choosing Insel means choosing efficiency, reliability, and a steadfast commitment to excellence. Optimizing Power Conversion: Three-Phase Full Wave Rectifiers Insel Rectifiers introduces state-of-the-art Three-Phase Full Wave Rectifiers engineered to optimize power conversion. These rectifiers ensure a continuous and smooth flow of DC output, making them indispensable for applications where precision and reliability are paramount. Trust Insel Rectifiers to deliver solutions that enhance power management in your systems. Why Partner with Insel Rectifiers? Unmatched Expertise: With a wealth of experience, Insel Rectifiers leads the industry with unparalleled expertise and knowledge in three-phase rectification. Quality is our top priority: Every Three-Phase Rectifier at Insel undergoes thorough testing to guarantee reliability, durability, and adherence to rigorous industry standards. Customer-Centric Approach: At Insel Rectifiers, your satisfaction is our priority. Experience dedicated support and tailored solutions to meet your specific requirements. Conclusion Insel Rectifiers goes beyond being a manufacturer; we are your trusted ally in three-phase rectification. Our unwavering commitment to excellence, innovation, and customer satisfaction sets us apart in the industry. Choose Insel Rectifiers for reliable and efficient three-phase rectifier solutions that empower your success.
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger
TVS Neo XR by the Duralife Engine, which combines a sophisticated roller-follower mechanism and a high-pressure oil lubrication system to dramatically reduce friction, making it more durable. By continuing to carry iEcono technology, it helps drivers control fuel usage. iEcono technology is supported by a Throttle Sensor which stimulates the optimal ignition system according to driving conditions.
TVS Dazz Prime, the ultimate choice for those who crave adventure and style. This motorbike offers a unique blend of power and efficiency. Equipped with a 110-125 cc engine, it's perfect for daily commutes and long rides alike. The Dazz Prime boasts a sleek design, making it a head-turner on the road. Its innovative features, such as a power outlet, make it a standout in its class. Whether you're a student, a professional, or an ojek rider, the TVS Dazz Prime is an excellent choice. Its affordability, combined with its impressive features, make it a top contender in the entry-level motorbike market. Don't miss out on this incredible offer. Visit your nearest TVS dealership today and experience the thrill of riding the Dazz Prime.
TVS Ntorq XP, the ultimate scooter for thrill-seekers. Inspired by TVS Racing, this 125cc scooter packs a punch with its 7.5kW power and over 10 horsepower. The XP, or Xtra Power, mode gives you the option to adjust the scooter's performance to suit your riding style, making it perfect for both street and race mode. The Ntorq XP features a range of innovative technologies, including a smart X connect charger for your phone, a digital instrument cluster with over 60 features, and a voice assist system that lets you control your scooter with ease. Its aggressive design, inspired by racing, is complemented by a premium decal and a long-range headlight that provides excellent visibility.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Firewood, pellets from sunflower husks, bran and straw; briquettes from corn straw etc.; e bikes; small wind turbines.
Hero motorcycles parts and tvs motorcycles parts.
ROSE PEARLS is a GMO-free, natural product made of high-quality organic Rose Damascena oil from Bulgaria. Rose Damascena, also known to the world as the Oil giving Rose from Kazanlak, is the queen of flowers and the Rose valley in Bulgaria has become her kingdom. Our rose plantations are located in to the village of Skobelevo - in the heart of Bulgaria, an ecologically clean area at the foot of the Balkan Mountains. In order to extract the essential ingredients of roses, our company Alba Grups uses water-steam technology, a technology with tradition in distillation. We use no chemicals in our process. Hundreds of rose petals are needed to extract just one drop of rose oil. For a kilogram of rose oil we need about 4 tons of rose petals, nearly 1,660,000 freshly picked roses. Rose flowers are handpicked very early in the morning and are processed as fast as possible to keep the high quality of the oil. This makes it one of the most expensive essential oils in the world. Its quality, how it is used, and the way it benefits the body have been known to the world for centuries. Rose Pearls capsules are a food supplement and benefit the digestive and urinary system. They help strengthen and bring the bodies systems into harmony, including the respiratory, reproductive and immune systems. Only three pearls a day will make you feel healthy, alive and energetic.
On grid / Grid-tied Rated power: 5000W No. of MPPT: 2 Strings per MPPT: 1 Phase: Three phase Warranty: 10 years Dimension(W/H/D): 500*428*200mm Net weight: 21kgs LED display Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit. The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied Rated power: 6000W No. of MPPT: 2 Strings per MPPT: 1 Phase: Three phase Warranty: 10 years Dimension(W/H/D): 500*428*200mm Net weight: 21kgs LED display Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit. The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied Rated power: 15000W No. of MPPT: 2 Strings per MPPT: 2+1 Phase: Three phase Warranty: 10 years Dimension(W/H/D): 500*428*200mm Net weight: 24.8kgs LED display Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit. The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.