It is a kind of tankless, lager-caliber tube and low-pressure solar water heater system with the following features The system contains 4-8 pieces of vacuum tubes as one unit, with each tube capacity of 16 liters of water. this one is 5 pieces of vacuum tubes as one unit. Inside each tube, there is a high-temperature-resistant and corrosion-resistant stainless-steel cylinder made of food-grade 304/316 material, so the solar heater does not require a water tank like other products in the market, thus saving space. the heater is pressurized. It is connected to the tap-water supply system and on the other side it is connected to the shower head in the bathroom, so the pipeline is relatively simple, and the installation and maintenance are also simple and convenient. Because this water heater is connected to tap-water supply system(pressurized), it can be installed anywhere for buildings, such as on the ground, the roof, the balcony, the terrace etc., whether high-rise building, multi-story building, bungalow or villa. Each tube is equivalent to a thermos bottle, which has good insulation performance, and there is air between the steel cylinder and the glass tubes, which also provides the added thermal insulation. and the tube openings are also insulated by good materials, ensuring optimal heat retention. Based on our experiments conducted on the rooftop of an eight-story building, with daytime temperatures reaching 7C and nighttime temperatures dropping to -3C or -5C, it is observed that when 15C water was injected at 9 AM, the water temperature ranged from 51C to 64C at 17:00 PM. The following morning at 8 AM, the water temperature ranged from 42C to 47C, and by 17:00 PM, the temperature of the hot water reached 85C.
Product Description It is a kind of tankless, lager-caliber tube and low-pressure solar water heater system with the following features: Capacity: The system contains 4-8 pieces of vacuum tubes as one unit, with each tube capacity of 16 liters of water. this one is 4 pieces of vacuum tubes as one unit. Tankless: Inside each tube, there is a high-temperature-resistant and corrosion-resistant stainless-steel cylinder made of food-grade 304/316 material, so the solar heater does not require a water tank like other products in the market, thus saving space. Pressurized mode: the heater is pressurized. It is connected to the tap-water supply system and on the other side it is connected to the shower head in the bathroom, so the pipeline is relatively simple, and the installation and maintenance are also simple and convenient. Flexible installation position Because this water heater is connected to tap-water supply system(pressurized), it can be installed anywhere for buildings, such as on the ground, the roof, the balcony, the terrace etc., whether high-rise building, multi-story building, bungalow or villa. Installation method: vertical, horizontal, inclined etc. installation Limescale prevention: Pre-filter as a standard feature gives an effective limescale prevention solution to avoid any potential worry. Excellent insulation: Each tube is equivalent to a thermos bottle, which has good insulation performance, and there is air between the steel cylinder and the glass tubes, which also provides the added thermal insulation. and the tube openings are also insulated by good materials, ensuring optimal heat retention. Based on our experiments conducted on the rooftop of an eight-story building, with daytime temperatures reaching 7C and nighttime temperatures dropping to -3C or -5C, it is observed that when 15C water was injected at 9 AM, the water temperature ranged from 51C to 64C at 17:00 PM. The following morning at 8 AM, the water temperature ranged from 42C to 47C, and by 17:00 PM, the temperature of the hot water reached 85C. The highest energy efficiency: due to its large area of absorption of sunlight, it is with good energy efficient whose hot water outlet is the highest. Automatic anti-freeze function: when the temperature falls below 5 C, the system will automatically activate the anti-freeze electric heating feature. optional devices: electric auxiliary heating pump station, gas water heater, electric water heater can be added to our heater system as auxiliary components to be used if weak or lack of sunlight. Customers can choose one out of above-mentioned three.
Product Description It is a kind of tankless, lager-caliber tube and low-pressure solar water heater system with the following features: Capacity: The system contains 4-8 pieces of vacuum tubes as one unit, with each tube capacity of 16 liters of water. this one is 3 pieces of vacuum tubes as one unit. Tankless: Inside each tube, there is a high-temperature-resistant and corrosion-resistant stainless-steel cylinder made of food-grade 304/316 material, so the solar heater does not require a water tank like other products in the market, thus saving space. Pressurized mode: the heater is pressurized. It is connected to the tap-water supply system and on the other side it is connected to the shower head in the bathroom, so the pipeline is relatively simple, and the installation and maintenance are also simple and convenient. Flexible installation position Because this water heater is connected to tap-water supply system(pressurized), it can be installed anywhere for buildings, such as on the ground, the roof, the balcony, the terrace etc., whether high-rise building, multi-story building, bungalow or villa. Installation method: vertical, horizontal, inclined etc. installation Limescale prevention: Pre-filter as a standard feature gives an effective limescale prevention solution to avoid any potential worry. Excellent insulation: Each tube is equivalent to a thermos bottle, which has good insulation performance, and there is air between the steel cylinder and the glass tubes, which also provides the added thermal insulation. and the tube openings are also insulated by good materials, ensuring optimal heat retention. Based on our experiments conducted on the rooftop of an eight-story building, with daytime temperatures reaching 7C and nighttime temperatures dropping to -3C or -5C, it is observed that when 15C water was injected at 9 AM, the water temperature ranged from 51C to 64C at 17:00 PM. The following morning at 8 AM, the water temperature ranged from 42C to 47C, and by 17:00 PM, the temperature of the hot water reached 85C. The highest energy efficiency: due to its large area of absorption of sunlight, it is with good energy efficient whose hot water outlet is the highest. Automatic anti-freeze function: when the temperature falls below 5 C, the system will automatically activate the anti-freeze electric heating feature. optional devices: electric auxiliary heating pump station, gas water heater, electric water heater can be added to our heater system as auxiliary components to be used if weak or lack of sunlight. Customers can choose one out of above-mentioned three.
Harness the power of the sun with our cutting-edge Solar Products viz. solar panels, solar Photovoltaic modules (PV modules), Mono Crystalline, Poly Crystalline, grid tied, off grid, hybrid and solar water heater system include storage tanks and solar collectors. Discover eco-friendly solutions for energy generation and consumption, paving the way for a sustainable future.
1. Inner tank: Import stainless steel SUS304-2B food grade; thickness:1.2mm 2. Outer tank: galvanized steel/Stainless steel SUS201, thickness: 0.4mm. 3. Vacuum tube: heat pipe 58x1800mm 4. The material of insulation:High-density polyurethane integrated foam-forming layer 50mm thickness 5. Frame(Bracket): galvanized steel/Stainless steel 6. Angle: As customer requirement 7. Heat preservation: 72hrs
Various Various
Solar water heater 1 pressurized inner tank: stainless steel sus304f¼1.2mm 2 vacuum tube: qb-al-n/al-58-1800 3 outer tank: painted steel-0.4 mm, stainless steel sus304-0.4mm 4 frame: coated galvanized steel sheet-1.5mm;stainless steel sus430-1.5mm. 5the material of insulation:polyurethane 55mm 6 the reflector:aluminum component : al 99.85% surface oxidation. Characteristic: 1 it takes the advantage of the tap waterf+s pressure.More pressure, more comfortable. 2 the water can be heated rapidly, so it can produce the high quality hot water. 3 it can produce more hot water than the general types because it isnf+t restricted by the volume of the tank. G.W. 89kg
here are two layers water tank, heat transfer fluid circulated between water tank and flat plate collectors naturally. Then it will be heated and transfer energy to water in inner tank. Hot water from this kind of solar water heater is pressurized. It is easily installed on the house roof.
Heating system: Thermosyphon (passive) Connection type: Direct-plug Installation: Roof mounted Housing material: Coated steel Certification: Ce Capacity: 165 Place of origin: Zhejiang china (mainland) Brand name: Jinyi & oem Model number: Jng5818-15 Out tank material: Coated steel Out tank diameter: 470mm Out tank thickness: 0.4mm Inner tank material: Sus304-2b Inner tank diameter: 360mm Inner tank thickness: 0.4mm Tank insulation pu foam: High density Tank insulation thickness: 55mm Vacuum tubes length: 1800mm Support bracket material: Galvanized steel Packaging detail:1. Cartons: 4ctns 2. Pallet: (charge by extra)
1.Non-pressure one pipe inlet-outlet: Characteristics: This type uses the all-glass evacuated solar collector tubes as the heater-absorbing element. The high vacuum degree of the clearance between the out and inner tube reduces the heat emission. The layer films(coating) of all-glass evacuated tubes transfer the sun energy into heat energy. Depending on the different density between hot water and cold water, a water flowing cycle is created in the tube. Hot water flows automatically upwards while the cold water flows down,The water in the storage tank will be heated this natural circulation. Material: Ocean01 a. Vacuum tube: GB-AL-N/AL-47-1500/58-1800 b. Inner tank: SUS304-2B,0.4mm C. Out tank: SUS304-BA,0.4mm d. Frame: SUS202,1.2mm e. The material of insulation: polyurethane Ocean02 a. Vacuum tube: GB-AL-N/AL-47-1500/58-1800 b. Inner tank: SUS304-2B,0.4mm C. Out tank: drawbench silver steel,0.4mm d. Frame: coated galvanized steel-1.5mm e. The material of insulation: polyurethane Ocean03 a. Vacuum tube: GB-AL-N/AL-47-1500/58-1800 b. Inner tank: SUS304-2B,0.4mm C. Out tank: drawbench silver steel,0.4mm d. Frame: Aluminium alloy, 2.5mm e. The material of insulation: polyurethane Split pressurized flat plate solar water heaters Characteristics: a. Collector separates with the storage tank. The tank can be put anywhere of the house b. And the collector can be put on both tilted roof and flat roof c. Module design, arbitrary combination, harmony with the building perfectly. d. Intelligent control and automatic operation e. Anti-freeze: no water inside the tubes when it works f. The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature. g. Multifunction: bathing, washing, domestic heating h. Working at any time and enjoyable. Material: Ocean04 a. Vacuum tube: GB-CU-SS-N/AL-58-1800 b. Inner tank: SUS304-2B,1.2-2.0mm C. Out tank: Painted steel-0.4mm d. Frame: Aluminum alloy,2.0mm Integrated pressurized flat plate solar water heater Characteristics: a. It is completely made of copper, good performance under pressure; the black-chrome-plated copper-strip and copper-pipe is welded by ultrasonic welding machine b. The black-chrome-plated coating has excellent quality, with high absorption efficiency and low emissivity c. The coating is resistant to high temperatures of 220 centigrade., the performance and quality of collector will not be affected; materials and coatings can bear fierce weather and have long life span; endothermic copper-strip with Nickel-plated has excellent resistance to corrode, which can be used more than 15 years. Material: Ocean05 a. Inner tank: SUS304-2B,1.2mm b. Core: black chrome C. Out tank: Drawbench silver steel, 0.4mm / stainless steel,0.4mm d. Frame: Aluminum,2.5mm Flat plate solar water heaters. Customized.
1. The outer tank: Color Coated Steel, thickness 0.4mm. 2. The inner tank: SUS304/2B, thickness0.5mm. 3. The warm keeping layer: polyurethane foaming 55mm. 4. The bracket, Galvanized Steel, thickness 1.5mm 5. Vacuum tube: 47-1500 or 58-1800, Two layer. 6. Angel of bracket: as your need.
OEM factory since 1998 CE,ISO,CCC,SGS Samples welcome 5 years warranty and free training Features:1.Cheap and reliable solution, Simple structure, Easy installation. High-efficiency. Scientific and reasonable design. Withstand water pressure no more than 0.1MPa Operated without any power supplying Electric heater 1.5KW for heating when there is no enough sunshine,such as raining,snowy. Hot water can be used directly and higher heating efficiency Detail Specifications: Inner tank: Food grade SUS304-2B stainless steel by argon protect welding& thickness: 0.5mm;2) Outer tank:Color steel coated anti-corrosion layer &thickness:0.5mm; Insulation layer: Imported polyurethane foamed with overall high pressure equipment & thickness : 55mm; Density:36~39KG/m3; Vacuum tube: AlN-Al high selective coating tube& Absorption:í¦93%; Emittance:í_ 5%. Freeze protection:-25íµ Hair resistance: 25-35mm Bracket: hot galvanized steel painted with anti-corrosion layer &thickness:1.5mm;suitable on inclined or flat roof; Wind stress: 183.5km/h without damage All install documents are free Export cartons packing/ wooden cases for sample
OEM factory since 1998 CE,ISO,CCC,SGS Samples welcome 5 years warranty and free training Feature: Low cost and no need high pressure material. Easy installation for flat roof or inclined roof; More safe and so hard enough to bear one people standing. Reliable and long lasting efficient Strong erosion-roof, no pollution to water Detail Specifications: Inter-tank: Food grade and high anti-corrosion SUS 304-2B stainless steel by auto welding & thickness: 0.5mm Outer-tank: Color Steel painted with corrosion layer &thickness: 0.5mm Insulation: 55 mm Polyurethane foam (heatápreservation 72hrs) Working pressure: 0Mpa(Testing pressure: 0.05Mpa) Flat collectors: Black chrome coating plate / Titanium(or Tinox) coating plate (Copper Connection: +22mm, 3/4ö) Bracket : Bracket: Hot galvanized steel painted with anti-corrosion layer & thickness:1.5mm Export cartons
OEM factory since 1998 CE,ISO,CCC,SGS Samples welcome 5 years warranty and free training Features:1.Cheap and reliable solution, Simple structure, Easy installation. High-efficiency. Scientific and reasonable design. Withstand water pressure no more than 0.1MPa Operated without any power supplying Electric heater 1.5KW for heating when there is no enough sunshine,such as raining,snowy. Hot water can be used directly and higher heating efficiency Detail Specifications: Inner tank: Food grade SUS304-2B stainless steel by argon protect welding& thickness: 0.5mm;2) Outer tank:Color steel coated anti-corrosion layer &thickness:0.5mm; Insulation layer: Imported polyurethane foamed with overall high pressure equipment & thickness : 55mm;Density:36~39KG/m3; Vacuum tube: AlN-Al high selective coating tube& Absorption:í¦93%; Emittance:í_ 5%. Freeze protection:-25íµ Hair resistance: 25-35mm Bracket: hot galvanized steel painted with anti-corrosion layer &thickness:1.5mm;suitable on inclined or flat roof; Wind stress: 183.5km/h without damage All install documents are free Export cartons/ packing
Inner tank: sus 304 Inner tank thickness: 1.2mm Outer tank: sus 304 Outer tank thickness: 0.31 Insulation: polyurethane imported from south korea Insulation thickness: 50-65mm Frame: sus430 Frame thickness: 1.5mm Pressure parameter: 0.6mpa Conducting materials: heat tube Advantages: for the pressured operation, got more rushed hot water while bathing. Even one vacuum tube broken, the whole system can go on working. Standard export package
Feature: Special Anodized aluminum alloy frame to ensure handsome appearance and can accept high pressure without leakage. 50mm fiberglass insulation and EPDM seal strip to assure the solar collector can work under cold temperature. Operation Temperature -33 degree to 120 degree. Patterned temper glass or low iron temper glass (4mm thickness) is not easy broken with very high transmission and low emission Black chrome or Magnetic blue sputtering coating has very higher absorption rate to ensure the high efficiency. Carton 100kg,
Thermosyphon solar water heater relies on the natural circulation of water between the collector and the tank or heat exchanger. As water in the vacuum tubes is heated it rises naturally into the tank, while cooler water in the tank flows down to the bottom of the vacuum tubes, causing circulation throughout the system. Technical specificationa *Both of inner and outside water tank shell are made of SUS3042B food grade stainless steel plates, welded by argon arc. Water is pure and drinkable. *Heat insulation of water tanks adopts polyurethane foam, thickness is 55mm. *Silicon rings to connect and seal them. *The tubes and supports are adjustable, power bearing is average, and can assure the vacuum tubes to use for long time. *Whole glass vacuum tubes adopt super hard borax and silica glass. *Absorb rate:=93%, thermal radiation rate:=6%(100 íµ) *Resist 25mm hail, using life can last 15 years. *Temperature when exposed to sun without water:250íµ, 2.5hours to boiling if using single tube. *If you use electrical appliances to aid heating, to switch off the power supple before boiling. *To test the water temperature before using, in order to avoid scalding.
Specifications: 1) Tank Inner tank: SUS 304-2B (food grade) Stainless Steel. Outer tank: SUS 201 Stainless Steel. Insulation layer: Polyurethane Foaming. Heat preservation: 72h. Tank capacity: 98L ~ 300L. 2) All Glass Vacuum Tube Diameter:ª¦47, ª¦58 Length: 1500mm, 1800mm. Numbers of tube: 15, 16, 18, 20, 24, 30pcs. Hail resistance: 25mm 3) Bracket Material: SUS 201 Stainless Steel. 4) Accessories: Electric Heater, Controller, Assistant Tank, Magnesium Stick and so on. Pack in cartons
Model: UNP-S02 Series Type: No pressure Solar Vacuum Tube: 8/10/12/15/18/20/24/30/36 Tube Size: 58*1800 1.95kgs Tank Capacity: from 80L to 300L Material: Stainless steel Bracket: U type and 1.2mm thickness
Product Description: Millionsun solar flat plate thermosyphon integrating system hot water heater is composed of solar flat plate collector, pressurized water tank, bracket, circulation pipe and accessories.Due to thermosyphon principle, the collector absorbs solar energy to heat the water inside, while the thermosyphon circulation inside enables the heated water to flow into and be stored in the water tank. Features: Stylish slimline design Thermosiphon operation minimises maintenance Electric booster models available Inner tank material: stainless steel 316 / 304 Black selective coating Absorber Details of the Product and quality is important for us Save 55% to 85% of your water heating energy consumption Reliable, low maintenance operation Flexible solution with options of collector and tank capacity Easy to mounting and installation Worklife over 15 years Company Profile: Established from 2006 year, Millionsun Group develop quickly through supplying high-quality goods with competitive price. We are now the excellent OEM and ODM partners for our partners,many client sign agent agreement with milliosun group and sell millionsun brand product in their local market. we hope to establish our brand famous in the world. Millionsun group factory area 50000m2, we have solar flat collector manufacture line, water tank manufacture line, bracket manufacture line, R&D Center and test center, 1600 workers. Our factory have ISO9001 certificate, our product get CE, SOLAR KEYMARK, SRCC, CSA, WATER MARK,AS certificate.