Fob/fot: coal (rb1/rb2/rb3) chromite (34/36, 38/40, 40/42) manganese (40/42) $192.00 saldanha port cif/fob/ttv & tto: base oil, jet fuel a1, jet fuel jp 54, gasoline 93 octane, lpg, lng, cst 180 fuel oil, automotive gas oil, virgin d6 fuel oil, diesel gas oil d2, espo crude oil, en590, ulsd 500ppm, light cycle oil, petroleum coke, bitumen 60/70, urea 46 carbamide.Transportation and shipping with commodities.
Gasoil, diesel, mazut, lpg, lng, jet fuel, bitumen, urea, used engine oil, occ, plastic waste, agrifood.Trade
Garment, espo crude oil, en590 10ppm diesel fuels, jet a1 fuel and gas lpg.Logistics and supply chain management, branding, labeling, and packaging
Base Oil SN 350 is a medium stock base oil produced from the vacuum distillates and residual components using the traditional refining methods. It has viscosity 8-9,5 cSt at 100C and 67-70 cSt at 40C. SN 350 is used in lubricant and lubricant additives production, mainly for industrial applications. The main benefits of SN 350 base oils are low sulphur content, high viscosity index, high oxidation stability and good susceptibility to the additives.
Base Oil SN 500 is defined as a light grade base oil at the upper end of the specifications for Grade I base oils. It is mostly used in lubricant production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities. Applications : Base Oil SN 500 works as a base stock for several industrial lubricants Engine oils Transmission fluids Gear oils Metal working fluids Greases Hydraulic oils Transformer oils
VG10 bitumen is the softest grade of viscosity bitumen. This type of bitumen is widely used for spraying applications and surface coating. VG 10 bitumen means that your bitumen is also suitable for paving roads in a very cold climate instead of the old 80/100 penetration grade. The air temperature that matches VG10 bitumen ranges from -10 â?¦C to 25 â?¦C. Due to the high temperatures in hot climatic zones, the application of VG10 cannot provide desirable rutting resistance. This type of bitumen is also used to manufacture bitumen emulsions and modified bitumen products especially in India. As a viscosity grade bitumen, VG10 has a better performance incold weather. To know vg10 latest price contact us.
VG-20 bitumen is a grade of viscosity bitumen used in cold climatic and high altitude regions. This grade of bitumen is suitable for road construction in regions with 30 to 37 C average temperature. In North India, vg20 is used for road construction in hot mix asphalt. The standard penetration value of bitumen viscosity grade VG-20 is 60 mm at 25 C. The absolute viscosity of VG-20 bitumen is 1600 to 2400 poise at 60 C.
Bitumen Penetration Grade 85/100 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by RABIT (RAHA BITUMEN) Co. is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by RABIT Trading Co. This bitumen is produced through aeration on vacuum bottom (the raw material used for making bitumen left in vacuum distillation column in oil refineries) in bitumen production units. Its penetration grade ( the measure of bitumen hardness) is between 85 to 100. Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen. The Bitumen mode is dependent on temperature. The temperature-vs-stiffness relationship of bitumen is dependent on the type of crude oil and its refining method. Bitumen penetration grade 85/100 is semi hard penetration grade bitumen used as a paving grade bitumen which is suitable for road construction and repair. It is also used for the production of asphalt pavements with the below technical specification. This grade of bitumen is mainly used in the manufacturing of hot mix asphalt for bases and wearing courses. Bitumen 85/100 is one of the most used bitumen grades and it�¢??s a basic material for all other bituminous products. Penetration determines the hardness of bitumen by measuring the depth to which a standard loaded the needle will vertically penetrate in 5 seconds, in a sample of bitumen maintained at a temperature of 25 degrees Celsius.
Bitumen penetration grade 60/70 is semi-hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair conjointly for the production of asphalt pavements with below technical specifications. This grade of bitumen is mainly used in the manufacture of hot combine asphalt for bases and wearing courses. Bitumen 60/70 is the most used bitumen grade and basic material for all alternative bituminous products. Bitumen Penetration Grade 60/70 is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by RAHA GROUP is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by RAHA GROUP is produced from vacuum residue (short residue) feedstock. RAHA Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.
Bitumen penetration grade 40/50 bitumen means the penetration value is in the range 40 to 50 at standard test conditions which commonly used as a Paving Grade. Bitumen is applicable for the production of hot mix asphalt for bases and pavements and for road construction. Penetration Grade Bitumen supplied by RABIT (RAHA BITUMEN) Co. This bitumen is produced through aeration on vacuum bottom (the raw material used for making bitumen left in vacuum distillation column in oil refineries) in bitumen production units. Its penetration grade ( the measure of bitumen hardness) is between 40 to 50. Bitumen is specified by the penetration and softening point test. Designing is by penetration range only. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature-viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.
Base oils are important basic raw materials for any lubricants included engine oils, gear oils, industrial oils, metal working fluids, hydraulic fluids and also greases. In most of the lubricants 70-90% ingredient is base oils. As per API classification Base oils can be grouped majorly into five groups, i.e., Group-I/II/III/IV/V. The base oil characteristics are very important in determining the quality of the finished product. Group I base oils are solvent-refined, which is a simpler refining process. This is why they are the cheapest base oils on the market.
VG40 bitumen is used in areas in which high pressure comes from heavy traffic loads, such as intersections, near tolls booths, and truck parking lots. Due to the high viscosity of this bitumen, it is more appropriate for improving resistance to shoving and other problems associated with higher temperatures and heavy traffic loads. Itâ??s long time that industries use vg-40 instead of the penetration grade bitumen 40/50.
This bitumen is primarily used for the construction of extra-heavy bitumen pavements that have to bear significant traffic loads. Bitumen VG30 is the most widely used type of bitumen in road construction, insulation, building construction industries, and also in the production of cutback bitumen. Itâ??s better to know that this vg30 bitumen can be used instead of 60/70 penetration bitumen grade.
Bitumen , All Grades
Product Description : BLCO contain 17 product iterms Price of product ( USD price or FOB price) : FOB USD 13/4, CIF USD10/4, per barrel. Product origin : Nigeria Key Specifications/Special Features : NNPC STANDARD NNPC TECHNICAL SPECIFICATIONS: SPECIFIC GRAVITY: 0.8398 API AT 60 DEG. F: Min 34.00 5% (ASTM D-1298) WATER CONTENT BY DISTILLATION: 0.2% (ASTM D-4006) POUR POINT DEGREES F: BELOW 40 (ASTM D-97) SULFUR WEIGHT %: 0.14 (ASTM D-139) SALT CONTENT PARTS PER BILLION: 3.0 (ASTM D-526) REID VAPOR PRESSURE (P.S.I.G.): 6.52 (ASTM D-529) KINEMATIC VISCOSITY @ 30 DEG. C: 2.2 (ASTM D-523) DISTILLATION INITIAL BOILING POINT (IBP): 35 DEG. C (ASTM D-86) DISTILL TO 75 DEG. C VOL.%: 7.0 DISTILL TO 175 DEG. C VOL.%: 35.5 DISTILL TO 250 DEG. C VOL.%: 51.5 DISTILL TO 300 DEG. C VOL%: 60.5 COLOUR Dark Brown Minimum Order Size and Packgaing details : 2 Million, 4 Million and 10 Million Barrel, Minimum 2 Million barrel Vessel per month.
Adhesives : packing tape, stationery tape, printing tape, masking tape, double side tape, invisible tape, silk tape, hologram tapes, flavored cashew nuts, peanuts, macadamia nuts, hazelnuts, hps groundnuts, betel nuts, sisal fiber, donkey skins & hides, a4 copy paper, used engine, car parts, car accessories, car engines, hides & skins, animal skins & hides, snails, aluminum rails, copper wires & cables, copper cathodes, cobalt, petroleum products.
Scrap material, copper wire, copper cathode, aluminum scrap (wire and rims) ubc aluminium scrap, used battery scrap, occ paper scrap, hde and ppe melt blown scrap ,all plastic and paper scrap material, used tyre. paraffin wax, bees wax, minerals copper ore, lepidolite ore, muscovite mica, zinc ore , titanium ore , cobalt, petroleum and petroleum by products. agricultural products and by products such as hides and skins, meat cuts and carcasses of bovine animals such as goat, sheep, cow and donkeys coffee beans and powder cosmetic ingredients natural butter and oils such as shea butter ,cocoa butter, edible oils, vegetables and sunflower oil.Business process outsourcing, consultation and trade brokerage
Technical Data Sheet Bitumen 60/70 Paving Grade Bitumen Description Bitumen 60/70 has the highest-boiling point, heaviest and most polar fraction from the vacuum distillation of crude oil. Bitumen 60 70 is composed of asphaltene and maltene. The heavy insoluble asphaltene molecules give bitumen 60/70 its body and softening point while the maltenes are oily and make asphalt flexible. Asphalting molecules are soluble in aromatic solvents like toluene but insoluble in heptane. The maltenes are heptane-soluble molecules and less aromatic. Applications Bitumen 60/70 is a high-quality penetration grade bitumen used in road construction and other similar applications. Bitumen penetration grade 60/70 is semi hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specification. This grade of bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Bitumen 60/70 is most used bitumen grade and basic material for all other bituminous products. Typical Specification ITEM SPECIFICATION TEST METHOD SPECIFIC GRAVITY @ 25/25 oC 1.01/1.06 D-70 PENETRATION @ 25 oC 60/70 D-5 SOFTENING POINT oC 49/56 D-36 DUCTILITY @ 25 oC SMC 100 MIN D-13 LOSS ON HEATING %WT 0.2 MAX D-6 DROP IN PENETRATION AFTER HEATING % 20 MAX D-6 & D-5 FLASH POINT oC 250 MIN D-92 SOLUBILITY IN CS2 %WT 99.5 MIN D-4 ORGANIC MATER INSOLUBLE IN CS 0.2 MAX D-4 SPOT TEST NEGATIVE *A.A.S.H.O.T 102 Packing: Bulk shipment, 150kgs, 180kgs, 200kgs new steel drum. 25kgs, 50kgs, 300kgs, 500kgs, 1000kgs Polybag.
Allocation - 5M BBL Discount to Buyer - 4% Spot +12 month Contract NWE Platts Procedure - Buyer must provide ICPO - Buyer must provide MT199 as proof they can do the deal (this is non negotiable) - Once the MT199 is provided buyer gets everything they need to verify the product, including full POP, with ATV (authority to verify, so they can engage the tank farm) and ATD (authority to dip) - If they have an existing SGS account, they will do this for them same day . SGS will then provide a full report - CI sent to buyer and transaction completes EN 590 10 ppm 1. Meeting at the office in with our partners, if necessary, they will conduct a tour of the plant 2. BCL display 3. I will put the volume on the partner's company 4. POP output 5. Checking the resource 6. Payment 7. Setting up the ship, loading the resource The price of Gulf ARA is $ 35(in MT, 7.5%). The volume is generally 100.
we are looking for serious buyers BITUMEN GRADE 60/90 TRIAL QUANTITY 30,000 METRIC TONS CONTRACT QUANTITY: 200,000 METRIC TONS (MONTHLY) CIF - PRICE: PER METRIC TON (GROSS USD$:130.00 / NET USD$:120.00) COMMISSION: USD$:10.00 PER MT (BUYER SIDE/SELLER SIDE (50%/50%) TERMS OF PAYMENT SBLC-MT760/DLC MT700 OR 2% PRODUCT VALUE VIA MT103 PERFORMANCE BOND 2% PB AGAINST MT760 SBLC, APPLICABLE TO CONTRACT ONLY INSPECTION: SGS, CCIC, SAYBOLT, INTERTEK OR SIMILAR BY SELLER SPECIFICATION: INTERNATIONAL EXPORT STANDARD
