Bitumen all grades Iranian Origin. Can supply at any safe jetty or port upon agreement and others. Ready to deal: Bitumen 60/70 CIF: 310 per Ton Payment: DLC
Bitumen all grades Iranian Origin. Can supply at any safe jetty or port upon agreement and others.
Origin IRAN
We provide a best quality of Bitumen Our offer: BITUMEN solid (hard) GRADE 50/70, PACKING: by 930 kg -/+ 5 kg in composite material boxes, in 1 FCL fits 20 special wooden boxes, total weight of the bitumen in 1 FCL 18600 KG ORIGIN: Lithuania PAYMENT INSTRUMENT: T/T or L/C DELIVERY: FOB Klaipeda (Lithuania), by marine 20 containers, or CIF ASWP.
We are successfully engaged in offering the highest quality Bitumen with penetration grades 10/20, 60/70, 80/100, MC30, MC70, MC250, Emulsion Bitumen, Oxidized Bitumen and polymer bitumen directly from the refinery. These product are widely used for road surfacing and many other industrial applications, it is also utilized as important ingredients for manufacturing of waterproofing and electrical products.
all Grades of Bitumen is Available Bulk or Drum
SL/N QUALITY SPECIFICATION TEST METHOD 1.Specific Gravity at25C 1.01/1.05 D -70 2.Penetration at25C 80/100 D -5 3.Softening point(Deg Centigrade) 45/52 D -36 4.Ductilityat25C(cm) 100min D -113 5.Loss of Heating 0.5max D -6 6.Drop in penetration after heating 20%max D -6 & D -5 7.Flash point(Deg Centigrade) 225 m D -92 8.Solubilitv in CS2(%wt.) 99.5 min D -4 9.Organic Matter lnsoluble in Cs2(w)% 0.2 max D -4 Spot Test Negative A.A.S.H.O. AMERICAN ASSOCIATION OF STATE SL/N QUALITY SPECIFICATION TEST METHOD 1.Specific Gravity at25C 1.01/1.05 D -70 2.Penetration at25C 80/100 D -5 3.Softening point(Deg Centigrade) 45/52 D -36 4.Ductilityat25C(cm) 100min D -113 5.Loss of Heating 0.5max D -6 6.Drop in penetration after heating 20%max D -6 & D -5 7.Flash point(Deg Centigrade) 225 m D -92 8.Solubilitv in CS2(%wt.) 99.5 min D -4 9.Organic Matter lnsoluble in Cs2(w)% 0.2 max D -4 Spot Test Negative A.A.S.H.O. AMERICAN ASSOCIATION OF STATE HIGHWAY OFFICIALS HIGHWAY OFFICIALS Type of drums: New Steel Drums WeightAround 175 Kg / Net Drum Quantity: Up to 20,000 MT per month Packing details: In 20ft Containers With 20 M/T In 110 Drums.
Ab Steel dream
GOOD QUALITY WITH 60/70 Grade Packing in new steal drums withg neight weight 183kg +/- 3%
Bitumen 60/70, 80, 100, 85/100 , mc30 etc. Drums (183kg) - 110 drums/ 20ft container
-Standard penetration bitumen in several grades:40/50 - 50/70 - 60/70 - 70/100 - 80/100 - 85/100, … -Oxidize bitumen -Cutback bitumen -Gilsonite : 5-10-15-20-25 % ash Drums / tanker / bag
Bitumen 60/70 80/100 Bulk 60/70 80/100 vg30 vg40 HDP,LDP HDPE RESIN PET RESIN petrochemical products
We are the manufacturer of different penetration of bitumen asphalt with different grade likes: 60-70, 80-100, 100-150, MC30, and other specification that buyer wants we can provide in different package likes: new steel drum, 1-ton jumbo bag, bulk
Bitumen is widely used in construction of asphalt roads and bituminous membrane products. Bitumen is also used for surfacing airfield runways and air strips (PMB is preferred due to its fuel resistant properties) and taxi ways. For the Marine construction industry bitumen is used for hydraulic applications such as canal lining, underwater tunnels, river bank protection, dam construction and sea defenses. There are also numerous industrial applications like roofing felt material, printing inks, packaging paper, linoleum, electrical cable / Junction box insulation, mastic for roofing of terraces, and duplex paper manufacture. Product origin : Middle east . Specifications/Special Features : Specifications for types/grades of Oil Bitumen according to buyer specifications and/or will be given upon received buyer credible purchase request in the form LOI/ICPO docs. Minimum Order Size and Packaging details : MOQ 5000 MT Bulk in tanker vessels. Drums 180 Kg. Jumbo bags 1000 Kg. Poly bags 32 Kg. Tanks 20 MT.
Comercial Name: BITUMEN APY10.5 ID/Code: ARA-901 BITUMEN APY 10.9 Bitumen 10.5 is also known as Boscan 10.9 in a high-quality heavy crude highly known and demanded in the world market for its high properties to be used as an asphalt base, with an APY of 10.5 and WT content with 5.4% average in widely used in Europe and Asia. The physical properties that distinguish this Bitumen, which is a Passed Crude, are its higher viscosity and density, as well as its molecular weight composition. Heavy Crude Bitumen from the Orinoco region of Venezuela has a viscosity of over 48,000 centipoise (10 Pa s) at 15�°C. A diluent is usually added at regular distances from a pipeline to facilitate its removal, circulation. In 2011, in the Orinoco Belt, a pilot project for alternating steam injection was started to improve the viscosity of crude oil, a technique that has increased the recovery rate to 40 percent, which was previously 20%.
Origin: Russia Quantity: 10 000 MT/per month / 100,000 MT per month Delivery: CIF 30/40 40/50 50/70 60/70 80/100 85/100 100/120
Penetration Grade Comments 40 - 50 Hardest grade. 60 - 70 Typical grades used in the U.S. 85 - 100 120 - 150 200 - 300 Softest grade. Used for cold climates such as northern Canada Penetration Grade Bitumen Specification (AASHTO M 20 and ASTM D 946) Units 40/50 60/70 80/100 100/120 Test Methods Specific Gravity @25 C - 1.01-1.06 1.01-1.06 1.01-1.05 1.01-1.04 ASTM D-70 Penetration @25 C, 100gm, 5sec 0.1MM 40-50 60-70 80-100 100-120 ASTM D-5 Softening Point, Ring & Ball C 52-60 49-56 45-52 42-49 ASTM D-36 Ductility @25 C, after TFOT, Min CM 100 100 100 100 ASTM D-113 Loss on Heating, Max %Wt 0.2 0.2 0.5 0.5 ASTM D-6 Drop in Penetration after Heating, Max % 20.0 20.0 20.0 20.0 ASTM D-6 & D-5 Flash Point Cleveland open cup, Min C 250.0 250.0 232.0 250.0 ASTM D-92 Solubility in CS2, Min %Wt 99.5 99.5 99.5 99.5 ASTM D-4 Organic Matter Insoluble in CS2, Max %Wt 0.5 0.5 0.5 0.5 ASTM D-4 Sport Test - Negative Negative Negative Negative *A.A.S.H.O.T.102 Viscosity Grade Standard Grading based on Original Asphalt (AC) Grading based on Aged Residue (AR) AASHTO M 226 AC-2.5 AC-5 AC-10 AC-20 AC-30 AC-40 AR-10 AR-20 AR-40 AR-80 AR-160 ASTM D 3381 AC-2.5 AC-5 AC-10 AC-20 AC-30 AC-40 AR-1000 AR-2000 AR-4000 AR-8000 AR-16000 Standard Grades Minimum of Absolute Viscosity, Poise@ 600�°C Approximate penetration grade IS73:2013 VG 10 800 80-100 VG 20 1600 - VG 30 2400 60-70 VG 40 3200 30-40/40-50 Viscocity grade over penetration grade several key issues are addressed, like: Viscosity Grade Bitumen Specification (IS 73:2013) Property Units VG-10 VG-20 VG-30 VG-40 Test Methods Penetration at 25�°C, 100g, 5sec, Min 0.1MM 80 60 45 35 IS 1203 Absolute viscosity at 60�°C P 800-1200 1600-2400 2400-3600 3200-4800 IS 1206 (Part 2) Kinematic viscosity at 135�°C, Min cSt 250 300 350 400 IS 1206 (Part 3) Flash point (Cleveland open cup), Min �°C 220 220 220 220 IS 1448 [P : 69] Solubility in trichloroethylene, Min %Wt 99 99 99 99 IS 1216 Softening point (R&B), Min �°C 40 45 47 50 IS 1205 Tests on residue from thin film oven test: - Viscosity ratio at 60�°C, Max 4 4 4 4 IS 1206 (Part 2) - Ductility at 25�°C, Min CM 75 50 40 25 IS 1208
A black viscous mixture of hydrocarbons obtained naturally or as a residue from petroleum distillation. It is used for road surfacing and roofing. Bituminous materials are used for road construction, roofing, waterproofing, and other applications. For the main application, which is road construction, the major concerns, as with concrete, are cost and durability.
We are all familiar with bitumen and have used it in our daily lives. Bitumen is mainly used as an adhesive in asphalt, which plays a very important role in road construction and sealing at landfills and hydraulic engineering. This important material has many roles in the world, for example, its other application is the production of roofing membranes and waterproofing for flat roofs and waterproofing of buildings. Bitumen is also used in many areas outside the construction industry because it has the effect of thermal insulation and sound absorption, which reduces foot noise. Bitumen is mostly used in insulation of roofs and roofs, which can prevent moisture and water penetration. Also, bitumen insulation is one of the most common waterproofing techniques in buildings due to its chemical and physical properties and preventing water penetration. Components are used in contact with the floor, floorboards and walls as a horizontal and vertical waterproofing In general, bitumen is used in construction in all parts of the world as the main sealing material for service bitumen, garden bitumen, balcony sealing, and pre-roofing bitumen substructure. Tile bedding such as bathrooms and toilets that are constantly exposed to moisture must be sealed with water to prevent water from penetrating them. There are also different types of bitumen in construction, such as mixed bitumen, emulsion bitumen, Trinidad bitumen, modified bitumen, tar bitumen, loose and mixed construction bitumen, hard construction bitumen, each of which has its own application
Bitumen is a viscous substance that exists in a liquid to a semi-solid phase. It has a blackish-brown color. It is generally composed of asphaltene resin and other petroleum compounds. Different compositions of bitumen result in different properties.
