Gas heater Oc-3000 Measurement 27.5*27.5*34.5cm N.W./g.W. 3.2/3.8kgs Tank capacity N/a Fuel consumption(l/hr) 80-150g Heater output 4000-6000btu/hr Tank system N/a Chimney type Metal Ignition type Piezoelectric ceramic Container capacity 930pcs/20ft, 2600pcs/40hq Other details Adjustable thermostat, safety device
From 10 liter till 150 liter
Wick-type fuel supply, Long lasting Fiber Glass Wick, burning rate up to 100%, smokeless and tasteless. * Heater portable design with carrying handle, The fuel tank is integrated into the body and can be moved to where it is needed. * Heater is safe, clean, energy saving and environmental friendly with large heating area. *The cost of use is one-half of the electric heater. *Heater around tempered glass can suppress smoke during combustion.
Specifications: 1) defrosting heater: applicable to indirect-cooling refrigerator, cooler, air-conditioner, pipe heater and some home appliance. 2) material: quartz tube 3) ambient temperature: -60ípc ~ +85ípc 4) resistant voltage in water: 2, 000v/min (normal water temperature) 5) insulated resistance in water: 750mª+ 6) power error (resistance): ía7% 7) firmness of connection end: í²50n 8) heavy duty glass construction 9) protective oxide coated element wire for long-term heater life 10) high temperature molded silicone end caps 11) special hard end caps 12) can be manufactured to proper length Any
Specifications: 1) defrosting heater: applicable to indirect-cooling refrigerator, cooler, air-conditioner, pipe heater and some home appliance. 2) material: quartz tube 3) ambient temperature: -60c ~ +85c 4) resistant voltage in water: 2, 000v/min (normal water temperature) 5) insulated resistance in water: 750mª+ 6) power error (resistance): a7% 7) firmness of connection end: ²50n 8) heavy duty glass construction 9) protective oxide coated element wire for long-term heater life 10) high temperature molded silicone end caps 11) special hard end caps 12) can be manufactured to proper length Any
Drum heater: Through heating up the liquid in the barrel, the coagulation can be easy to take Out, such as the adhesive agent in the barrel, bituminous, the grease, the pitch, The paint, the paraffin wax, the oil and respectively resin raw materials. The size Can be made as per your requirements. Drum heater and pail heaters drum and pail heaters can provide practical, Efficient means of freeze protection, viscosity control and maintenance of Materials at elevated temperatures. Drum and pail heaters conduct heat Through the drum wall to the product inside. Adjust the thermostat to Automatically maintain the correct temperature. We have alll kinds of drum and Pail heaters for various sizes, from 5-gallon drum and pail up to a 55-gallon Drum and pail. Drum heaters can operate at higher temperatures and work faster On metal drums. We also have more gentle drum heaters for your plastic and fiber Drums. Heating element in durm heater is laminated between two layers of 0.6mm Fiberglass reinforced silicon rubber and has an adjustable thermostat that goes From 50íp f to 410íp f (10íp c to 210íp c). Each heater band is equipped with a Six-foot cord set (230 volt heater bands without a plug). A built-in metal Screen is grounded electrically for safety. All heaters are high potential Dielectric tested at 1500 volts at the factory. Drum heaters are available with Either a 115 or 230 volt rating. Drum and pail blanket heaters Drum blanket heaters provide more efficient, more uniform heating with better Temperature control. Rugged aluminized cloth has 1" of fiberglass insulation for Less heat loss and increased worker safety. Provides outstanding freeze Protection, as well as temperature and viscosity control. Velcro fasteners make Installation easy for a single person. Any
Solar heater
Oil heater Series from 5 to 15 fins Maximum power from 1, 000 to 2, 500w 3 heat settings Adjustable thermostat control Triple overheat protection Operation switches with indicator light Pressure tested for safety Smooth castors for easy moment With 24 hours programmable timer Colour carton
Coil heater Have get iso9001:2000 , iqnet , cnab , ce , cqc and rohs certificates .
Clear heaters are ideal for preventing condensation and frost on vehicle cameras, optical sensors, side view mirrors and other locations where the space for the heater to work is limited. Transparent heaters are critical for use in the challenging environments of cameras, LCDs, and optoelectronics below -10 C. Applications in avionics, cameras, LCDs, and automotive require heaters so they can operate in cold and harsh climates. The resistance of the heater determines the required heating rate and power utilization. The lower the resistance, the higher the power required and the higher the heating rate. Using a heater is the easiest solution. How do transparent heaters work This transparent heater usually consists of a transparent conductive layer of indium tin oxide (ITO), which is applied to a transparent substrate such as glass or plastic. When electricity passes through the conductive layer, it generates heat while still maintaining its transparency.
Ceramic Bobbin heater is a unique steatite and Cordierite heating element, which can be installed freely to directly heat the air. In the manufacture of bobbin heaters, we use ceramic segments and combine them to form the required length. These segments have notches, and we can place open heating coils in these notches. With this design, it is possible to prevent the heating coil from contacting the chassis and maintain good electrical insulation. Global Ceramic Bobbin heaters are also used to indirectly heat liquids, air and gases that stick to the radiant tube. Put these tubes into the medium and put the Bobbin heater into the tube. It is now easy to replace the ceramic heater without having to empty or open the water tank. These pipes are equipped with flanges or threads for easy installation, and sensors, thermostats or limiters are also built into the custom junction box. Application examples are hot air ovens, industrial bathrooms and water tanks, oil heaters, air heaters and boilers. Our ceramic Bobbin heaters are available in cylindrical and rectangular designs.
We have an extensive stock of surplus parts and 2nd source parts, largely for AMAT, Centura, Endura, HDP Ultima Plus, Novellus, LAM, Mattson, TEL Parts, IMP Parts, etc. This stock changes regularly as we gain excess items from our many equipment refurbishment projects
Ceramic heater are widely used in pre-heating of plastic sheets for vacuum forming & thermoforming, drying paints, lacquer & varnish curing, drying printing inks, drying textiles, activating adhesives, removing surface water from objects or moisture removal from fabric and paper, animal husbandry and rearing.The ceramic IR heaters are highly efficient.Ceramic infrared heater offers precise targeting and control with minimal peripheral heat. It is possible to apply heat only where and when it is required.
Only defects that cannot be refurbished are defects on the puck, like cracks and fractures of ceramic parts. There are heat wires inside the ceramic puck and if the puck is broken,it is very probable that heat wires are damaged, which cannot be repaired.
In case of all Mca e-chuck, Mca heater, ESC, ALN Heater, Magnet Assy products used in PVD manufacturing process, we offer a various services of refurbishment that are conducted by our own engineers and in-house. Or if customers ask, we provide new one.
The Ceramic Heater is ideal for spot heating or area heating of remote locations, farm buildings, shops, service areas, pump houses or other hard-to-heat spaces, providing both fuel efficiency of radiant heat and installation flexibility not recommended for car washes. This is a Millivolt Standing Pilot heater and does not require an external power or electricity to operate, so it's great for use during power outages. Requires Millivolt thermostat for SGM sold separately. May require the following second stage regulators prior to the heater based on gas supply pressure
MCA ESC is a key consumable part of the PVD equipment used in the deposition process in the semiconductor manufacturing process that should be replaced regularly due to high temperature/ high pressure conditions and quality problems because of impurities in the chamber.
AMAT MCA E-chuck Heater PVD process parts warranty : 3 months condition : Used like OEM-New (All refurbished) P/N 0010-01288 AMAT MCA E-chuck Heater PVD process parts
200 liters 1.5kw All in One Domestic Water Heater OSD-200SAI 1) Panosonic rotary type Famous compressor, low vibration, low noise and high reliability. 2) Fast water heating up to 70. 3) Enamel water tank,decontamination anti-scaling 20 years lifetime. 4) Easiest installing, IPX4 safety,Water and electricity separation . 5) Touch screen intelligent control, easy to operate. 6) Smart control system, Electric heating function. 7) Powder coated & Stainless Steel housing for options. Optional: R410a, R134a, R407c refrigerant is available.
Duct heaters are mainly used for heating air through the duct. There are three types, low temperature, middle temperature and high temperature. The outer stainless steel sheath and construction can reduce the vibration of heating elements. There is a overheat protector in the terminal box. Air pressure through the duct should not exceed 0.3KG/cm?. Or else it is better use recirculation duct heaters. Max temperature of low temperature duct heater is not more than 160 C. Max temperature of middle temperature duct heater is not more than 260 C. Max temperature of high temperature duct heater is not more than 850 C. lt has been applied extensively in aerospace industry, weapon industry, chemical industry, and research and manufacturing laboratories in institutions of higher education. etc.
