DECORTEX D�©cor tex is water borne acrylic texture based on modified styrene emulsion with aggregates, which provide special pattern on the wall, woods suited for all climatic condition PROPERTIES Colour : As per shade card Finish : Texture finish Consistency: Thixotropic Solids: 65 % �± 3 % Specific gravity: 1.70 �± 0.05 Theoretical Coverage 1 -2 m2/ltr DRYING TIME :â?? AT 25 �° T To handle: 4 hours To Recoat: overnight Number of coats: 1 Application by: Roller for heavy tex or Hooper spray
Epoxy finish is a two pack solvent based paint suitable for kitchens, workshops, factories, and chemical plant floor. PROPERTIES Colour : Available in pastel and dark shades Finish : High gloss/Egg Shell Theoretical Coverage 7-8 m2/ lit Curing time: 15 â??20 hours at 25�° C Full cure: 7 days Flash point 22�°C (ISO 367 â??83) Specific gravity: 1.35+.05 when mixed A+B Pot life: 8 hours at 25�° C Mixing ratio: 4 parts baseâ??Aâ?? : 1 part hardner â??Bâ?? Solvent: Epoxy thinner. High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.
Multi-purpose bitumen coal tar emulsion. PROPERTIES Gloss level: matt (ISO 2813-78) Solids: 25% (+/- 2 %) Viscosity: 22000 cps @25 �°C Brookfield 4/4) Theoretical Coverage 1 â?? 1, 5 m2/lit (@ 40u) DRYING TIME â?? AT 25 �° To touch: 1 hour To Recoat: 24 hours Max.overcoat interval: Not applicable Vehicle type: bitumen â??coal tar Specific gravity: 1.03 (+/- 2%) Flash point: Inflammable liquid.
Tollens epoxy finish is a two pack solvent based paint suitable for kitchens, workshops, factories, and chemical plant floor. PROPERTIES Colour : Available in pastel and dark shades Finish : High gloss/Egg Shell Theoretical Coverage 8 m2/ lit Curing time: 15 - 20 hours at 25 C Full cure: 7 days Flash point 22C (ISO 367 - 83) Specific gravity: 1.35 when mixed A+B Pot life: 8 hours at 25�¯ Mixing ratio: 4 parts base A: 1 part hardner B Solvent: Epoxy thinner. High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.
we supply 1,colour matching of 2k,1k base coat and pearl,silver,primer,putty,clear coat,hardener the fully series from 1st to the top coat for automotive paint 2,additionally,we can also supply Enamels NC paint for industrial usag 3,with decades of experience our matching team can provide you the best price and result. We are looking for car refinish distributors, pls join us to get the mutual benefits!
Brighto Acrylic Matt Emulsion Paint Price : 0.90 Ltr - USD 3.1 3.60 Ltr -USD 8.2 18 Ltr- USD 35.1
Description Two-component Air Drying Acrylic Aliphatic, Non Yellowing polyurethane finish coating. Recommended Use :- This product has excellent weathering resistance additionally it offers excellent resistance to various industrial chemical fumes and splash. This product is recommended as topcoat with suitable primers and undercoats for use in High Chemical & Saline atmosphere for better aesthetics and corrosion resistance in Chemical, Fertilizers, Petrochemical, industrial plants and also for premium industrial equipments. Not recommended for immersion application. Physical Data COLOUR : Industrial Shades FINISH : Glossy / Semi-glossy SOLIDS BY VOLUME : 40 + 3% (Depends on shade) THEORETICAL SPREADING RATE : 13.33 sq.mt / ltr @ recommended DFT of 30 FLASH POINT : Base : Above 23 C Hardener : Above 23C DRYING CHARACTERISTICS (At 300 C & 65% Relative Humidity) : SURFACE DRY : 30 minutes max HARD DRY : Overnight FULL CURE : 7 Days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation This being a topcoat, which is applied over, primer or intermediate coats, the surface should be free from oil, moisture, dust and dirt. Aged epoxy / PU coating should be roughened by emery paper grade 400 / 600 for better bonding. Application Data :- MIXING RATIO : Base: Hardener - As per our recommendations APPLICATION : By Brush / By Conventional Spray / By Airless Spray THINNER : Type 290 POT LIFE : 4 hours min at 30C RECOMMENDED DFT : 30- 40 . OVERCOATING INTERVAL : MIN : 8 hours MAX : 24 hours COMPATIBILITY : Can be applied over Epoxy and Polyurethane primers, intermediate coats and topcoats.
We are supplying Turpentine oil . Turpentine oil used for thinning of enamel paints and primers .
GI Conduit is a pipe used to protect and route electrical wiring in a building or construction. It provides very good protection to enclosed conductors from impact, moisture, and chemical vapors. Specifications We can Supply ERW Stove Enameled Rigid Steel Conduit pipes ( Medium protection) as per ISI 9537, Part II/ 1981 and Hot Dipped Galvanized Rigid Steel Conduit pipes ( High Protection) as per ISI 9537, Part II/ 1981. Size in outer diameter 20mm, 25 mm, 32mm, 40mm,50mm Wall Thickness 16 SWG(1.40-1.80MM) and 1.40 SWG(1.60-2.20 MM)
Both are for exterior and interior use and can be applied directly on new masonry surfaces. It is available in different attractive shades with bright finish For price, specification and other details please contact us
Brighto Paint Remover (Gallon 3 Ltr) Price : 3.60 Ltr -USD 4.1
Neo has extensive range of primers based on Epoxy / PU / Synthetic Resins. NEO PRIME GUARD grades are quality Epoxy based primers while NEO SHIELD PRIME grades are PU primers. These are used as a primer. They exhibit excellent adhesion properties and will stick to bare metal, Paints, primers, and fillers. They are used as a anti corrosive / protective primers. Neo offers multiple grades loaded with special additives, pigments for meeting specific requirements.
FOB $250/MT MOQ 22MT Our used engine oil is 100% from vehicles workshop, and that is the reason is higher quality as compared to a supplier who mixed vehicles and factory used engine oil, and that is the reason we have max ability to supply only 2000 mt per month, as we try to keep the quality at the highest in its grade. The contract specs are as below, however in reality it's better as you can see in our latest lab test result in the attached picture. 1) Water : +/- 2% 2) Gross calorific Value : Min 10 000 Kcal 3) Sulfur content : Max 0.
Radiator Coolant : 50 :50 is a coolant and corrosion inhibitor formulated using virgin ethylene glycol to enable effective performance in radiators, engine jackets, piping and heat exchangers by depositing a protective mirco-thin film on all metal surfaces contacted. Note: Radiator Coolant 50:50 is a â??READY TOUSE PRODUCT â?? DO NOT ADD WATERâ??. APPLICATION For use in passenger cars, light and heavy-duty commercial vehicles, off road stationary equipment found in construction, agriculture, mining, power generation and marine, sectors. BENEFITS Adequate operating temperature range against boiling and freezing of the coolant. Excellent protection against corrosion of ferrous, yellow and alloy metals, including aluminium. Prevents cavitation and prolongs life of water pumps. Does not affect rubber hoses and seals.
Brake Fluid is an ethylene glycol base fluict miscible with all other conventional brake fluids of similar quality except for mineral and silicon based fluids. APPLICATION For use as hydraulic fluid for brake and clutch systems of all vehicles where DOT 3 and DOT 4 performance level is required. BENEFITS Very high safety factor due to very high boiling point. High resistance to moisture absorption. High protection against corrosion of metal components in the brake systems. Compatible with rubber seals and hoses. Suitable for use at both low and very high temperatures.
ATF is a transmission fluid, having a low co-efficient of friction to meet specific equipment manufacturers requirements. It is formulated from high viscosity index base oils combined with viscosity index improvers, anti-oxidant, anti-wear agents, detergents, dispersants and other elements. APPLICATION High performance transmission oil for semi and fully automatic transmissions and power steering systems where a fluid of GM Dexronll D type is recommended. BENEFITS Protection against wear and corrosion. Excellent lubrication at all operating temperatures. Correct frictional properties. + Better foam resistant.
Transgear EP range of oils are extreme pressure multipurpose gear oils formulated from solvent refined high viscosity index base stocks and selected additives. APPLICATION Recommended for use in gearboxes and rear axles where extreme pressure properties are required particularly for hypoid and bevel gears BENEFITs The content of EP additives ensures a continuous lubricants film even� on gears operating under the most severe conditions. The antifoam property minimizes the formation of air bubbles that could adversely affect the continuity of the lubricant film. The high viscosity index ensures that lubricated parts operate correctly over a wide range of temperatures.
PREMIUM MONO GRADE ENGINE OIL Premium 40 is a monograde  SAE  40 engine  oil formulated  using  high quality  base oils and balanced chemical additives  to provide protection  of petrol engines  in  both start- stop driving and highway conditions. It can also be used for non-turbo diesel engines. APPLICATION Petrol engine oil where API SF level is recommended.� Diesel engine oil where API CD level is recommended. BENEFITS Gives good control against formation of lacquers and deposits at high temperatures. Provides protection against sludge formation. Ensure a high level of cleanliness and wear protection.
TurboFleet 15W-40 is a premium quality high performance rnultigrade engine oil of SAE 15W-40, formulated using high quality base oils together with multifunctional additive. APPLICATION TurboFleet 15W-40 is for use in modern day diesel and petrol engines, for both turbo- charged and naturally aspirated� light,� medium� arid� heavy-duty� passenger� and commercial vehicles� and� industrial� equipment� operating� under� the� most� severe technical and service conditions. BENEFITS Suitable for use in all ambient temperature conditions due to the� multigrade properties. Ensure long drain intervals due to the anti-oxidant, anti-rust and anti-wear properties designed for heavy-duty services. Viscosity variation is minimised due to minimised oxidation. Reduced wear ensures maximum efficiency throughout engine life. Can be used as one grade for all engine in the fleet, regardless of make.