RFID glass tag ,also called RFID capsule tag which especially designed for animal identification. It meets the ISO standard and are available with parylene coating to prevent migration of the tag once implanted.
RFID glass tag ,also called RFID capsule tag which especially designed for animal identification. It meets the ISO standard and are available with parylene coating to prevent migration of the tag once implanted. Microchip is a simple safe and quick procedure. The microchips are the size of a grain of rice and the procedure can be carried out by a veterinarian or a trained implanter and takes only a few minutes but can last a lifetime. 1.25*7mm now is smallest sized pet microchip, widely used for tagging fish, mice, etc such very small animals; while 2x12mm is the common sized and popularly used on the market for dog, cat, horse, etc. If your pet gets lost or goes missing, it can reunite you with your pet.
RFID glass tag ,also called RFID capsule tag which especially designed for animal identification. It meets the ISO standard and are available with parylene coating to prevent migration of the tag once implanted. Microchip is a simple safe and quick procedure. The microchips are the size of a grain of rice and the procedure can be carried out by a veterinarian or a trained implanter and takes only a few minutes but can last a lifetime. 1.25*7mm now is smallest sized pet microchip, widely used for tagging fish, mice, etc such very small animals; while 2x12mm is the common sized and popularly used on the market for dog, cat, horse, etc. If your pet gets lost or goes missing, it can reunite you with your pet.
UHF FABRIC LAUNDRY TAGS TEXTILE/LINEN LAUNDRY TAGS size: 55 X 12mm, 70 X15mm, 87 X 17mm chip: NXP UCODE 8, NXP UCODE 9, Operating Frequency: 865 -928 MHzTag Material: Polyester, Tag Warranty: First of 200 wash cycles or 3 years from ship dateRead Distance: Up to 3 meters (up to 9 feet), have to test it with your reader Storage Temperature: -40'C to + 120 C (-40 to +248F) Washing Cycle: Washing: +90�°C (+194F), 60 minutes, Dry: +180�°C (+356F), 3 minutes(dehydrationpress: 35 bars) lroner: +195�°C (+383) 30 seconds < 18 bars, Water Extractor: 60 bars, 80 secondsAutoclave: Air removal: +100C (+212F), 5 minutes, 0.1 bar, Drying: +45'C (+113).15 minutes, 0.2 bar, Sterilizing: +134C (+273F), 20 minutes, 3.25 bar,Chemical Resistance: All Chemicals common to the washing process
Made by TRitan Plastic - Safe material - Eastman USA
Logiball Elliptical Mainline test and seal injection packers are custom-made for the exact pipe dimensions and the available access to the storm sewer lines. The two end rubber bladders are covered with a soft rubber sleeve that provides superior seating against rough surfaces. Our elliptical grout packers are equipped with a localized pressure sensor and two injection grouting ports protected by a large, non-clogging adjustable rubber check-valves. Contact us if you need a special configuration. Rentals available, contact our sales department for further information.
2001J Mainline Packers meet the highest standards for testing and sealing joints of mainline sewer pipes with acrylamide, acrylate or urethane gels. Logiball 2001J Mainline Packers meet the highest standards for testing and sealing joints of mainline sewer pipes with acrylamide, acrylate or urethane gels. A thick, reinforced SBR rubber sleeve is bonded to the stainless-steel core and a layer of softer rubber is applied over the seating portion to provide superior seating against rough surfaces. The smooth outer finish reduces the adherence of the grout on the packer. Logiball 2001J Mainline Packers come with two grout ports and a third port dedicated for the test medium (air or water). MAIN FEATURES: Void Pressure Monitoring Systems: Two different void pressure monitoring systems are available to accurately transmit the void test and grouting pressures to a gauge read by the camera or through a pressure transducer. The conventional localized sensor is recommended for acrylamide and acrylate grouts. The in-wall water chamber sensor is recommended for stickier grouts such as urethane gels and polyurethanes. The 2001J Packer can be ordered with both systems or one of the two as needed by customer. Dedicated Test Port: By using a dedicated hose from the truck to the packer for the test medium (air/water), â??Hâ?? blocks are eliminated and the mixing ratio of the two-part grout is kept constant (no flushing of the catalyst when testing). Features Three-Function Adjustable Rubber Check-Valve: They provide added safety against syphoning the tanks and unwanted backflow contamination into the hoses, and provide a good mixing of the two-part chemicals through the fan like stream of the opposed and adjacent ports. The Autotesting Concept: When inflating the 2001J packers, the ends first seal against the pipe wall, while its central portion progressively expands, trapping air and water, and compressing it into the mixing chamber. The pressure in the chamber is transmitted through the improved liquid filled sensor and/or the in-wall water chamber sensor to a gauge or transducer installed on the packer. The operator can tell if a joint is obviously good or not by simply inflating the packer over it. By avoiding time consuming conventional tests, productivity could be increased by as much as 30%. Logiball 2001J Packers approximate void volumes. ICGA promotes the proper use of chemical grouting as a safe, economical and effective mean to reduce ground water.
Painter's tape, also known as masking tape, is a type of pressure-sensitive adhesive tape that is widely used in painting projects. It is designed to be easily applied and removed without leaving residue or damaging the surface it is applied to. Painter's tape is typically made of a Washi paper or Crepe paper as carrier. It has a relatively low-tack adhesive on one side that allows it to adhere to surfaces temporarily.
Crepe paper tape is a masking tape that is made from crepe paper. It is named for its crepe-like texture, which gives it flexibility and allows it to conform to uneven surfaces. Crepe paper tape is commonly used for masking or protecting surfaces during painting or other types of applications where you want to prevent paint or other substances from reaching certain areas. It is designed to be easily applied and removed without leaving residue or damaging the surface it is applied to. There are several different types of SLAA crepe paper tape available, each with its own unique characteristics and recommended uses. Here are some of the common types: General Purpose Masking Tape, for Marking and Labeling, house hold repair. UV-Resistant Masking Tape, for exterior painting projects. Multi-Surface Painterâ??s Tape, for walls, windows, ceiling. High-temperature Masking Tape, automotive masking tape for curves. High-Adhesion Painter's Tape, for stucco, for concrete, for brick, rough surfaces.
Aluminum bottles for perfume are a type of packaging that is used to preserve and transport various fragrances, such as perfume, cologne, or scent. Aluminum bottles are preferred over plastic or glass bottles because they are more durable, recyclable, and resistant to corrosion and leakage. They have different capacities, from 50ml to 500ml, depending on the customerâ??s needs
Aluminum bottles for the plant protection industry have capacities of 50ml 100ml 250ml 500ml 1000ml. This is a type of packaging that is used to store and transport pesticides, herbicides, fungicides, and other chemicals that are used to protect plants from pests and diseases. Aluminum bottles are preferred over plastic or glass bottles because they are more durable, recyclable, and resistant to corrosion and leakage.
Himalay Packaging is Engaged Mono Carton Box Manufacturer & Supplier in Ahmedabad. Mono Box Exporter & Dealer in Gujarat. Printed Duplex Box Manufacturers
32oz Doner Box 105x80 Top (mm) x 95 Height (mm) x 95 Bottom (mm) 300 GSM Bristol+18PE 19gr MOQ 100,000 Custom Print
26oz Doner Box 95x80 Top (mm) x 90 Height (mm) x 90 Bottom (mm) 255 GSM Bristol+18PE 16gr MOQ 100,000 Custom Print
16oz Doner Box 85x70 Top (mm) x 95 Height (mm) x 83 Bottom (mm) 255 GSM Bristol+18PE 14gr MOQ 100,000 Custom Print
Oil seal is the seal of lubricant oil. It is an important and indispensable original of lubrication sealing system of rotary shaft of general purpose machinery. Commonly used in a variety of mechanical bearing point, especially the position of rolling bearing. its function is isolation the oil cavity and outside.
Corrugated Boxes
Packaging Printing
Stickers Printing
Made of durable cardboard with superior white outer coating Chemically resistant to alcohols and mild organic solvents Five assorted colors available: white, yellow, pink, blue, and green White premium cardboard freezer boxes have a glossy coating, other colors have a matte coating Water resistant coating for improved durability Superior white 90-1281 & 90-1200 cardboard cryogenic boxes without outer coating are also available Holds 0.5ml, 1.5ml, 2.0ml, 5ml and 10ml tubes and 15ml or 50ml Centrifuge Tubes Working temperature: stable from -196 C to 121 C Suitable for liquid nitrogen freezing(vapor phase)
