Product Category- Construction Chemicals Product Name- Scottproof Sun Kool Description of the product- Reduces temperature of building structure up to 5% - 7% Area of Use (Application)- 1. Concrete, Fibre 2. Roofings of residential and commercial complexes 3. Cold storages 4. Fuel and water tanks" Category (For Painters, Carpenters, etc.)- Contractors/Painters USP of the product- 1. Primer for internal and external surfaces 2. Based on chemically inert polymers, suitable for high alkaline substrates 3. Provides deep penetration thus imparts excellent substrate adhesion" Area of application- Exterior
Product Category- Construction Chemicals Product Name- Krack seal Powder Description of the product- Filling of normal plaster cracks upto 2mm wide Area of Use (Application)- Repairing of internal and external cracks in plastered surfaces upto 5mm size Category (For Painters, Carpenters, etc.)- Contractors/Painters USP of the product- 1. Strong adhesion to common building substrated 2. Does not contain solvent thus no emission of vapors 3. Acts as a surface leveller before painting, it reduces paint consumption and increases the life of the paint, making it economical" Area of application- Interior & Exterior
Product Category- Construction Chemicals Product Name- Krack seal XL Description of the product- Filling of normal plaster cracks upto 5 mm wide Area of Use (Application)- Internal and external plastered brick masonry surfaces wall cracks of upto 5 mm width Category (For Painters, Carpenters, etc.)- Contractors/Painters USP of the product- 1. Flexible & UV resistant, does not crack, accomodates minor movements in cracks 2. Over coatable after 24 hrs by any type of polymer based paints 3. Excellent adhesion with cementitious surfaces" Area of application- Interior & Exterior
Product Category- Construction Chemicals Product Name- Plaxem Description of the product- Admixture for concrete with waterproofing properties Area of Use (Application)- Concrete and plasters Category (For Painters, Carpenters, etc.)- Contractors USP of the product- 1. This product is designed to give most satisfactory waterproofind performance even in poorly graded cement/concrete mix. Its highly economical 2. Increases workability and cohesiveness of the mix 3. Reduces water cement ratio and increases the compressive strength" Area of application- Concrete
Product Category- Construction Chemicals Product Name- Scott proof POM Description of the product- Waterproofing additive Area of Use (Application)- All plaster and mortar Category (For Painters, Carpenters, etc.)- Contractors USP of the product- 1. Excellent waterproof powder and plasticizer for mortar 2. Minimum rebound loss 3. Eliminates bleeding and segregation" Area of application- Plaster
We are manufacture for concrete admixture raw metarials orijin Turkey.
Food Grade Calcium Sulfate-- FOB $330 per ton. MOQ 5 tons. -
High activity agent for concrete N90 TOPFILL® N90 is a new type of reinforcing material, its main component is modified Silica. The particle size distribution is 60nm~500nm, the aggregate structure is a single sphere, with irregular groove surface and relatively lower structure. The smallest structural unit is spherical. With extremely low surface activity, structural units could not be agglomerated. The smallest structural unit has uneven surface, with certain reinforcing performance. Nano grade structural unit has a very low degree of structure. Good dispersion in rubber, with addition amount increasing the rolling resistance of tread rubber decreased.
Dr. Vista Poly Geo is A hazy Aqua eco-friendly liquid for stabilization of soil and rheological characteristic of soil. This polymer help the soils from being washed away by increasing the sedimentation rates and stabilize the soil. ADVANTAGES 1 . Dr. Vista Poly Geo is VERY COST EFFECTIVE SOLUTION. 2. Dr. Vista Poly Geo makes the slurry non- shrinking and increase the steric stabilization. 3. It affects the aggregation and strength of soils through its interactions with fine clay particles. 4. It is very useful in soil stabilization for any type of bore wells, any type of holes, any types of cut holes and drilling holes. 5. It is a safe material causes no harm to workers. 6. It clears all flocs to make homogeneous slurry of soil before coagulation and stabilization DOSES 0.25 to 1% of Water. Higher dosage has no abnormal or bad effect. USES Dr. Vista Poly Geo can be used for any application overhead as well as under earth. i It can be applied deep within the soil through pressure or applied directly to uncompacted soil. i It can replace any other chemical binders for soil stabilization. i Quick decantation is possible due to its low alkali contents and low pH value. i It can be used in lower water surface area, where the water pressure is high. HANDLING PRECAUTION Dr Vista Poly Geo is non-toxic, non-flammable, Eco-friendly and generally harmless. Any splashes to the skin must be washed with water .lf contact with eyes occurs, wash well immediately with water and seek medical advice.
Polycarboxylate superplasticizer / polycarboxylic copolymer [product description] High range water reducing agent, superplasticizer, early strength agent, dispersant, concrete admixtures
1.6Ton/ IBC tote 19.2Ton/20GP
Improved adhesion: Such as walls, ceilings, or wood surfaces. It helps create a strong bond between the putty and the substrate, reducing the risk of cracking or delamination. â??Enhanced workability: It helps achieve a smooth and easy-to-apply consistency, making it easier to fill cracks, level surfaces, and achieve desired finishes. â??Increased flexibility: RDP allowing it to accommodate minor movements or substrate changes without cracking. This is particularly important in areas where some degree of movement is expected, such as walls or ceilings. Improved crack resistance: It enhances the overall strength and durability of the putty, minimizing the risk of cracks forming over time. Water resistance: RDP can reduce the risk of moisture-related issues such as swelling, warping, or degradation.
Cement based, thick aggregate, thixotropic, Class R4, high performance repair and filling mortar. It is enriched with fibre and polymer additives. It has high strength and does not crack.
* PHOSCAST Phoscast : Phosphate Bonded Castables * PURPOSE customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system. BACKGROUND * Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles. * GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates. Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion * Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected. APPLICATION Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.
SBR Latex URP (Universal Repair Polymer) is based on modified styrene butadiene latex supplied as a ready to use bonding agent in liquid consistency. Its used to repair of spilled concrete floor, columns, beams, roofs, water tanks, toilets & bathrooms, small terraces etc. It bonds strongly to old & new concrete and to plasters. Its reduces shrinkages, prevents cracking, improves abrasions resistance.
High-efficiency csa expansive agent is obtained by blending suitable natural anhydrite with a specially manufactured clinker which consists essentially of calcium sulphoaluminate and CaO. Csa expansive agent is always mixed with ordinary cement. When mixed in the proper proportions with ordinary cement and hydrated, cement mortar or concrete expands during the early stages of hydration.
HPMC 200000mpaÃ?s For tile adhesive, mortar, concrete, etc. high viscosity, excellent water retention, prolong open time, improve sag regresistance, smooth workability.
Type:Yd1030 Film-forming temperature Ash content Particle diameter 80-120 Character:Good adhesion, dispersity and film formation Type:Yd1060 Film-forming temperature Ash conten Particle diameter 120 Character:Good adhesion, dispersibility and film forming;water resistance and flexibility are strong Type:Yd1090 Film-forming temperature Ash conten Particle diameter Character:Good adhesion, dispersibility and film forming;water resistance and flexibility are strong
Akfix C900 is polyester injection mortar for general purpose for solid and hollow supports having a short cure time. It is suitable for use in concrete, perforated bricks and cavity blocks in a wide range of applications. Suitable for solid and hollow structures. High solid content. Easy to extrude and to inject. Thixotropic, can be applied in vertical and horizontal direction. Fast curing.
Waterproofing compound Expert is unique cement admixture (integral liquid waterproofing compound) which is lignosulphonate base for overcoming construction industry problems. It is good plasticizing agent having excellent waterproofing properties.Sulphate and chloride contents are very low., providing high workability and flowability. Finest quality is assured. Dosage is less as 100 ml per 50 kg cement. 1 ltrs to 200 ltrs.
