Description YL-09 NP is naphthalene-based non-chloride set-accelerating water-reducing admixture, it significantly accelerates setting time, and reduces the quantity of mixing water necessary to produce concrete of a given consistency, while providing greater economy for a given strength. It increases strengths and significantly improves permeability, workability and finishing characteristics. It complies with GB 8076-2008, GB50119-2003 and ASTM C494, Type E. Uses This product is designed for the constructions requiring earlier strength for normal concrete, steel-reinforced concrete, and pre-stress concrete under normal temperature, low temperature (-5 to 30 degree C). Widely used in pre-cast & deposit concrete, armored concrete, pre-stressed reinforced concrete and fly-ash-cement concrete. Compatible with Portland cement, normal Portland cement, Portland slag cement, fly-ash cement and Portland pozzolanic cement etc. Suitable for self-cured concrete and its formulations. It has remarkable effects of water reduction and enhancement, especially at the early stage. The modulus and site utilization can be improved. Advantages Accelerating setting time across a wide range of temperatures. Increasing early and ultimate compressive and flexural strengths. Water reducing 10-15% with low dosage of 1.5-2.5% After application, all physical properties of concrete can be improved to a certain extent. 10%-15% of cement will be reserved when it is applied as a condition of blending in which collapsibility and strength are fixed forehand. Specifications Item Norm Item Norm Appearance Gray powder PH value 7-9 Fineness (0.315mm remains) % ¹12% Chlorine content Non Moisture ¡¨¹10% Fluidity of cement 160mm Technical Data Sheet Item Actual results Criteria Water-reducing rate (%) Y12 Y8 Bleeding rate ratio (%) 90 Air content (%) ¡¨¹2.5 4.0 Setting time difference (min) Initial setting -30+30 -90+90 Final setting -30¡«+30 -90+90 Compressive strength ratio (%)Y 1 day 145 135 3 days 140 130 7 days 120 110 28 days 110 100 Shrinkage ratio (%) 28 days ¡¨¹120 135 Corrosion reinforcing steel bar Non Package, Storage & Shelf Life For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg. It should be stored in a dedicated warehouse that is well-ventilated and dry and keep away from moisture. Shelf Life: Minimum 12 months. After the expiration date, it can be used if testing results is qualified. For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg.
Description YL-15 is naphthalene-based non-corrosive, non-chlorine compound antifreeze admixture which compounded with water-reducing, early-strength, reducing the freezing point, preventing freezing damage etc. ingredients, powder, it has early-strength, water-reducing, air-entraining, anticorrosion etc. functions. It is mixed to the concrete according to the request, can obviously improve the configuration of the capillary pores and reduce free-water and the freezing point of the concrete effectively. And it can accelerate cement hydration and concrete hardening under the low temperature condition, enhance the early strength greatly and make the strong more and more by time, is ideal admixture for construction in winter. Uses YL-15 is suitable for the winter construction (in ambient temperatures ranging from -5 degree to -20 degree) of common concrete, pumping concrete, large volume concrete and ready mixed concrete. Advantage YL-15 is a new generation of high efficient anti-freezing admixture. Small dosage, completely water soluble, low alkali, apparent reducing effect on the alkali-aggregate reaction. It can improve the workability, pumping properties and early strength of the concrete. YL-15 is suitable for concrete and precast below C50 but also the concrete above C50 with a addition of our high range water reducing admixture. Specifications Item Norm Item Norm Appearance Lark powder Fluidity of cement 120-160mm Moisture ¹10% Chlorine content Non PH value 7-9 Alkali content % 2.2 Technical Data Sheet Item JK-15 C10 JK-15 C15 JK-15 C20 Dosage 2.0% 3.0% 4.0% Lowest Daily Temperature -5degree -10 degree -15 degree Setting Time Difference (min) Initial -+120 Final Compressive Strength (Mpa) 1 day 8 2 1 3 days 25 20 10 7 days 40 30 15 28 days 60 50 40 Shrinkage (%) 28 days 20 Steel-bar Corrosion None Cautious 1.After the pouring construction covers the surface using the plastic sheeting and the grass curtain, do not let it to freeze immediately or blow the winds excessively caused the crack. Entering the mold temperature control above 5 degree. 2.Required heating curing at the early strength fast-enhancement. After the concrete formed, if the surface iced up, this phenomenon does not cause any the freezing damage. The intensity will remain enhancing rapidly, when the ambient temperature increasing. Package, Storage & Shelf Life For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg. It should be stored in a dedicated warehouse that is well-ventilated and dry and keep away from moisture. Shelf Life: Minimum 12 months. After the expiration date, it can be used if testing results is qualified. For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg.
Toluene Diisocyanate TAR / TDI TAR Uses - Curing Agent in Construction / Paint Industry Bulk Volumes GCC Origin
Is a high-performance polycarboxylate superplasticizer developed by HUAXUAN HIGH TECHNOLOGY to meet the needs of different concrete slump protection. This series of water reducers have excellent slump retention and extremely high water reduction rate through molecular structure optimization design, which greatly improves the plastic index of fresh concrete and improves its pumping and construction properties. At the same time, the strength growth and structural development of hardened concrete have also been significantly improved. The product has a low content and strong adaptability to various concrete raw materials, and it can meet various requirements for concrete slump protection under pumping, medium and low slump, long-term transportation, and high-temperature construction conditions. By adding HUAXUAN HIGH TECHNOLOGY�® KH-206 can obtain the following results: (1) Excellent slump retention: within a certain period of time, the fluidity increases by time, till it increases to the maximum value. (2) Ultra-high water reduction rate: the water reduction rate is as high as 40% or more; (3) The concrete has good mobility, easy pouring, and easy construction; (4) Good workability: no segregation and no bleeding, which is conducive to concrete strength growth and structural development. (5) Wide adaptability: adapt to various cements and admixtures. Appearance:light yellow liquid Solid content:50% Application: It is suitable for concrete with high requirements for slump retention, such as large-volume concrete, long-distance conveying concrete and pumping concrete. It is especially suitable for maintaining concrete slump under long-term transportation and high-temperature construction conditions,also it is suitable for various Water conservancy, marine engineering, ports, transportation, electric power and other national key projects that require high concrete performance,especially recommended for high-strength high-performance concrete, super-fluid, earthquake-free and self-compacting concrete. How to use: It is recommended to be used in combination with other water-reducing polycarboxylic acid water-reducing agent mother liquor. The ratio of water-reducing mother liquor to slump-preserving mother liquor is better to be (90%-50%): (10%-50%), and the solid content after compounding should be 0.05%~0.25% of the cementitious material.After being diluted in proportion, add it to the concrete mixer together with water,and youâ??ll see better effects when adding retarder of 1-4% of the quality of the water reducing agent. If you are interested in our company's products, you can contact us, the following is our contact information:
HUAXUAN HIGH TECHNOLOGY�® KH-204 Is a new version high-performance polycarboxylic superplasticizer. Compared with other high efficiency water-reducing agents,it has the properties of ultra-high water reduction,low shrinkage,low bleeding rate and small avalanche loss. Ultra-high water reducing rate:up to 40%,particularly significant in high-grade concrete (above C50).In the same condition,it costs less material to get the same effect. Excellent plastic retention: Excellent plastic retention performance: Because the steric hindrance of the extended polymer side chain effectively hinders the secondary agglomeration between cement particles, the product has high dispersion and can maintain this performance for a long time. Good early strength and strengthening effect: under the same conditions, the concrete mixed with this product has a higher early strength and strengthening effect than other types of superplasticizers. Significantly improve the durability of concrete: The product has a low alkali content, and because itâ??s an air-entraining type high efficiency water reducing agent, it significantly reduces the alkali-aggregate reaction of concrete and improves the freeze-thaw resistance of concrete. Stability: The concrete shrinkage and creep properties will be effectively improved after adding the product,in the meanwhile, it gains a good stability, so there are lower risks of cracks.
Silica sol is a colloidal solution of amorphous silica dispersed in water. Because of the surface reactive hydroxyl group of silica, it can be bonded with carboxyl, amino and ester groups. It has a wide range of application value, and can be used in coating, ink, casting, paper making, battery, electronic polishing and other industries.
Superplasticizer As the result, the modulus and site utilization can be drastically, the procedure of vapor cure is omitted in peak-heatsummer days. Statistically 40-60 metric tons of coal will be preserved when a metric ton of the material is consumed.The new raw material is researched and produced by ourselves, which is mainly used in theproduction of polycarboxylate superplasticizer products.
AMPS FLUID LOSS ADDITIVE Risol FL1300S PHYSICAL AND CHEMICAL INDICATORS Appearance Bulk Density, g/cm3 Water-Solubility 0.315mm Sieve (45 mesh) Residues, % White or faint yellow powder 0.70±0.20 100%
AMPS Fluid Loss Additive Risol FL 5000S Product Description Risol FL5000S is a water-soluble synthetic viscosifying polymer,which can control fluid loss through Adsorption and aggregation reducing pore size and enhancing viscosity of water phase. Risol FL5000S fluid loss additive is non-retarding Polymer, which makes it ideal for lightweight cementing compositions that typically have long thickening times. The additive promotes good compressive strength at low temperatures, and it performs well in seawater and fresh water.It can be used with seawater, and high concentrations of salt. Specially designed for the application in low density cement slurry system. Generates thickening effect on the cement slurry and enhances cement slurry's suspension stability. cement slurry system is stable with little free fluid. It provides exceptional filtrate control when used with retarders at bottom hole circulating temperatures up to 160C. Technical Datasheet Requirement Specification Fluid loss, ml/(90 C,6.9MPa,30min) 100 Thickening time, min/ (90C,35.6MPa) 60~160 Initial consistency, Bc 30 Compression strength, Mpa, /(105C,20.7MPa,24h) 14 Free fluid, % 1.5 Cement slurry:API Class G cement (HSR): 800g, distilled water: 352g, Risol FL 5000S: 6.4g,Risol RT100S:2g, defoamer:1.6g. Features Appearance : Colorless or light yellow powder; Temperature range: 30 C-160C (BHCT); Normal dosage: 0.6%-1.5%(BWOC); Package:25kg/bag; Guarantee Period: 1years.
Superplasticizer
There are many industries in the leading refractory market who is constructing a lot of alumina mortars in India but Imperial World Trade continues leading of others due to its high quality and regular production of its products. We manufacture 70 K mortar using special quality of raw material stuff in our tremendous plant where state of the art of technology is functioned.
COCONUT SHELL The strongest part covering the coconut fruit is the coconut shell.They are used to produce handcrafts and biodegrable products. Due to their strength they are used effectively in the handmade decorative items and also have long time life period. USES >Ice cream cups >TO produce active carbon >Utensil >Plywood >Coconut shell powder SPECIFICATION Moisture 15% Dust 3%
HPMC 100000 For wall putty, coating, gypsum plaster, render, EIFS, etc. Moderate viscosity, improve water retention and sag resistance, smooth workability
Product Category- Construction Chemicals Product Name- Scottproof Wall coat Description of the product- External waterproof coating Area of Use (Application)- 1. Exterior surface of RCC 2. Concrete panels plastered masonry walls 3. Can also be applied on asbestos sheets" Category (For Painters, Carpenters, etc.)- Contractors/Painters USP of the product- 1. Twice as thick as premium exterior paint - provides crack bridging ability, waterproofing properties and resistance to cracking 2. Provides excellent sheen and finish to any building structure 3. Flexible - covers hairline cracks (upto 0.5mm wide) effectively and prevents ingress of water" Area of application- Exterior
Product Category- Construction Chemicals Product Name- Rapidite Description of the product- For extra rapid setting Area of Use (Application)- All plaster and mortar Category (For Painters, Carpenters, etc.)- Contractors USP of the product- 1. Quick setting 2. Rapid hardening and waterproofing compound for cement/concrete" Area of application- Plaster
Product Category- Construction Chemicals Product Name- Scottproof 200 Description of the product- Filling of normal plaster cracks upto 5mm wide Area of Use (Application)- Concrete and plasters Category (For Painters, Carpenters, etc.)- Contractors USP of the product- 1. Remarkable improvement in flow and workability 2. Most economical waterproofing additive for plaster and concrete 3. Reducing water cement ration an increases the compressive strength" Area of application- Concrete & Plaster
Product Category- Construction Chemicals Product Name- Zoriscott Clear Water base Description of the product- Transparent coat for pavers and painted surface Area of Use (Application)- "1. Paver block, painted surface, mosaic tiles, vertical and horizontal painted walls 2. Easy application by brush or spray" Category (For Painters, Carpenters, etc.)- Contractors USP of the product- 1. Single component, ready to use concentrated liquid material 2. Excellent adhesion properties for ceramics 3. Excellent gloss with low dirt pick up" Area of application- Stones & Marbles
Product Category- Construction Chemicals Product Name- Scottproof Roof seal Description of the product- Acrylic waterproof coating Area of Use (Application)- Terraces and exterior walls Category (For Painters, Carpenters, etc.)- Contractors/Painters USP of the product- 1.Tough and elastic film provides excellent waterproofing 2. Provides higher film thickness of 500 to 600 micron in three coat application 3. Bridges cracks upto 2 mm width" Area of application- Exterior
Product Category- Construction Chemicals Product Name- Scottproof Water seal Description of the product- Colourless waterproofing coating for vertical walls, stone facades, mangalore tiles and porous slabs Area of Use (Application)- 1. Cement painted surface concrete mortar clay brick surfaces etc. 2. Natural and artificial stones 3. Mangalore tiled roofs" Category (For Painters, Carpenters, etc.)- Contractors/Painters USP of the product- 1. An economical water repellant coating 2. Does not change the appearance of the exterior decorative coating 3. Prevents entry of moisture into the wall but allows moisture to evaporate out 4. Prevents efflorescence" Area of application- Interior & Exterior
Product Category- Construction Chemicals Product Name- Scottproof Tank seal Description of the product- High performance elastomeric cementitious waterproof coating Area of Use (Application)- Brush applied waterproofing for portable water tanks, septic tanks, swimming pools etc. Category (For Painters, Carpenters, etc.)- Contractors/Painters USP of the product- "1. Elastomeric flexible coating that bridges cracks upto 2 mm width with an elasticity of 40-50% 2. Four times thicker ordinary polymer cement coating with dry film thickness of 1 mm 3. Certified for potable water contact by CFTRI" Area of application- Interior & Exterior