Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM â?¥4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Railway Track Square Railway square ruler is a special measuring tool used to check the right Angle dislocation of railway track. Features 1. High accuracy:The structure is uniform, the linear expansion coefficient is minimal, the internal stress completely disappears, the ruler body is stable and does not deform. It can keep the perpendicularity between the ruler body and the rail surface â?¤0.05mm 2. Long service life: It is made of aluminum alloy, resistant to acid and alkali corrosion, not easy to rust, not easy to stick to dust, no need to grease, easy and simple maintenance 3. Stable insulation performance: one end is the insulated electric board and the other end is the plastic insulation sleeve. It can ensure the operating safely. 4.Customizable 5.The Measuring head is made of bearing steel: High hardness, not easy to rust and deformation 6.Multifunctions 1Measure the switch angle steel whether is square when installed 2Measure the internal lock switch parts whether is square when installed 3Measure the switch rail whether creeping 4 Measure the sleeper whether square when installed. PRODUCT SPECIFICATIONS Model LJFG-I Type Railway Track Square Material Aluminum alloy Size 1760mm Warranty 1 Year
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. PRODUCT SPECIFICATIONS Model NQGâ??5.8 Type Abrasive Rail Saw Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Railway Track Square Railway square ruler is a special measuring tool used to check the right Angle dislocation of railway track. Benefits 1. High accuracy:The structure is uniform, the linear expansion coefficient is minimal, the internal stress completely disappears, the ruler body is stable and does not deform. It can keep the perpendicularity between the ruler body and the rail surface â?¤0.05mm 2. Long service life: It is made of aluminum alloy, resistant to acid and alkali corrosion, not easy to rust, not easy to stick to dust, no need to grease, easy and simple maintenance 3. Stable insulation performance: one end is the insulated electric board and the other end is the plastic insulation sleeve. It can ensure the operating safely. 4.Customizable 5.The Measuring head is made of bearing steel: High hardness, not easy to rust and deformation 6.Multifunctions 1ï¼?Measure the switch angle steel whether is square when installed 2ï¼?Measure the internal lock switch parts whether is square when installed 3ï¼?Measure the switch rail whether creeping 4ï¼? Measure the sleeper whether square when installed. Specification Model: LJFG-I Type: Railway Track Square Material: Aluminum alloy Size: 1760mm
The Rail Rerailer Device is made of high-quality cast steel,consisting of left and right Rail Rerailer Device bodies,screws,and locking pins. It is suitable for trains on 60kg/m rail lines,which can be used to realign the derailed wheels caused by accidents.The Rail Rerailer Device is used to re-enter the track along the guide rail surface of the rerailer with the help of the locomotive's own power through the wheel tread and rim,thus achieving the purpose of self-rescue Place of Origin Hubei, China Type Railway maintenance equipment Material Stainless Steel Dimensions (L x W x H) (mm) 300*300*150mm Brand Name Linkage Type Railway tools Usage railway track maintenance Product name Railroad rerailer Application Railway maintenance Standard CRCC Color customized Suitable can be used for different kind of rail Certificate CE Warranty 1YEAR Customized Yes Packaging and delivery Port Shanghai Supply Ability Supply Ability 500 Unit/Units per Month
Horticultural tying wire to help you take care of your garden
Wood Pellet Spesification : a. Total Moisture : 0.99 % b. Proximate Analysis: - Moisture in the Analysis Sample 3,22% (ADB) - Ash Content - 1,22% (ADB) - Volatile Matter - 78,78% (ADB) - Fixed Carbon - 16,78% (ADB) c. Total Sulfur - 0.02% (DB) - Gross Calorific Value 4752 KCal/Kg (ADB) - Gross Calorific Value 4861 KCal/Kg (ARB) D. Physical Properties - Diameter 6 - 8 mm - Length 50 mm - Bulk Density 0,71Ton/M3 = 710 Kg/M3
BRAND JAMRUD77 Specification : Grade : UTY,UTY DS (Double Shading), UTY Better Faceback : Kruing/MC Core : Senggon/albasia/albizia/silktree Dimension : 1220 x 2440 Thickness : 9mm, 12mm, 15mm, 18 mm
Daybed gazebo completed with matrasa and cushion dimention 200x200x200
Bicycle parking has an additional bracket for supporting the frame, which provides maximum stability. Bicycle parking, produced by the Rud E. S. company, has an option with the possibility of placing two bicycles. Arrangement of bicycle parking is possible both to a solid base with anchor bolts, and to an unstable base by concreting. Powder, polymer painting. Color according to the RAL catalog.
The grill is anti-vandal. Optional: portable / stationary Very convenient, powerful grill. Fixed grid (12 mm). The thickness of the case is 4 mm. Pipe-base 76 mm. The grid has 3 positions for choosing the correct temperature. Rotating. Painted with ecological fire-resistant paint "Pyrolak" (Greece)which withstands up to 1000 degrees C. Weight without packaging 51 kg
The outdoor wood stove "Baker" works on firewood, briquettes, charcoal under any weather conditions. The Baker pizza oven can be quickly and easily placed anywhere in the city, in a crowded place, you can set up a restaurant on wheels and sell very tasty wood-fired products to visitors. Food preparation time in a this oven is only 5 minutes. With our signature recipes and cast iron cookware, you will be able to prepare a wide variety of delicious dishes: meat, fish, porridge, soups, baked goods and much more. Portable. Fits in the trunk of a car. Assembled dimensions (H * W * D): 600mm * 500mm * 550mm Weight: 60 kg The set includes: stove, chimney, thermometer, chamotte tile, stand, instructions, warranty card.
Features: - Your logo on the case. (Option) - Powder paint is used - Easy garbage disposal - Installation of anchor fastening is possible - The material is steel
Volume - 50 l Materials - wood / galvanized steel Garbage hole - from above
Park rubbish bin, metal, galvanized with bottom discharge "R2D2". 50 / 70 liters. Stylish, modern. Own development of the Rud Exhaust System company. Features: powder polyethylene thermoplastic paint is used. After coloring, the paint remains plastic, does not crumble, does not reflect. Suitable for repair. Anti-graffiti. Warranty for paintwork is 5 years; anti-vandal performance; anti-terrorist enforcement according to EU standards; lower garbage disposal (no need for p/e bags) - European trend; the ashtray is separated from the main garbage. During the unloading of garbage, the ashtray is unloaded at the same time. Possible installation: thanks to the universal fastening system, it is possible to attach to any poles, traffic lights, fences, racks, etc. Material - hot-dip galvanized steel 1.2 mm, 2 mm RAL colors upon agreement with the customer.
Kaminofen - the name consists of the German words kamin and ofen (stove). This free-standing heating unit combines the functionality of a fireplace and a stove. Kaminofen can be installed anywhere, providing the possibility of connecting a chimney. The wood stove is equipped with a fire grate and a catalyst (additional option). It has certificates of compliance with the European Safety Standards EN-13240 and BilSchV2.