Bentonite is a high swelling clay mineral whose name was derived from the location of the first commercial deposits mined at fort benton, wyoming u. S. A. Mineralogically, bentonite mainly consists of montmorillonite in combination with various mineral impurities such as feldspars, calcite, silica, etc. Montmorillonite belongs to the smectite group of clays which also include similar behaving minerals such as beidellite, saponite and hectorite. Geologically bentonites are mainly of volcanic origin, the majority of commercial deposits were formed by the hydrolysis or metamorphism of volcanic rock or ash and are almostly found in everywhere in world. The structure of montmorillonite is fundamentally a three layer structure with an octahedral aluminium hydroxyl sheet sandwiched between two layers of silicon- oxygen tetrahedra. However, the aluminium atoms are partially replaced by the substitution of either magnesium or iron atoms, thereby creating a charge deficiency within the unit structure. This results in a small negative charge on the basal plane of silica tetrahedra which is balanced by absorption of exchangeable cations between adjacent platelets. In natural montmorillonite, these cations are usually calcium, sodium or magnesium according to the formations of bentonite. Specification -welldry activated clay (montmorillonite clay, bentonite clay), 100% pure clay desiccant without any calcium chloride. In p.P. Woven bags of 25 kgs / 50kgs /1000 kgs net Kept in dry and ventilating place, prevent from rain and moisture when storage; if agglomerated, please crush and make it into solution, and its effect will be the same.
Coal fly ash; Grade 1/2/3; Standard GB1596-91; Large quantity and low price are available for you
Uses SM-P is recommended strongly for use in all ready-mix, precast, and prestress concrete applications where low water-cement ratio, low permeability, high durability, high strength concrete is specified or high slump flowable concrete is required. SM-P can be applied in various concrete, including high strength concrete, high fluidity concrete, high duration concrete, aluminate cement refractory concrete, grouting material, steam curing concrete, high strength mortar, gypsum products, and so on. Advantages Increase concrete early strength. Promote workability. Increase flowability. Increase cohesiveness and segregation resistance. Shorten mold take-off time. Keep water/cement to a minimum. Promote air stability. Compatible with cements, gypsums and other admixtures. Reduce bleeding at high slumps. Woven fabric bag with plastic liner. Net weight: 20kg +/- 0.13 kg It is easy to absorb moisture from air. So it must be kept in original sealed bag and stored at dry condition. The shelf life is one year. This product is non-toxic and non-flammable. So there is no special transportation requirement.
Clinker - raw material for cement. In bulk packing
Our fly ash is used for cement and concrete production.
Perlite ore 15 kg-20 kg-50 kg
Asbestos Non-asbestos yarn, asbestos braided rope, asbestos tape, asbestos cloth, sheet, asbestos packing, fiberlass, glassfiber yarn, glassfiber rope, glassfiber tape, glassfiber cloth, glassfiber blanket, ceramic fiber yarn, ceramic fiber rope, ceramic fiber tape, ceramic fiber cloth, ceramic fiber paper, ceramic fiber board, ceramic fiber blanket, anti-corrosion tape, carbon fiber cloth, carbon fiber tape, carbon fiber rope
Cement clinker in bulk Bulk
Butane gas cartridge Net weight: 190gr Suitable for camping, indoor and outdoor use. High quality product complying with en 417 and european standards. 48 pcs/ctn or 36 pcs/ctn
Diluted benzoyl peroxide Cas no.:94-36-0structural formula: Chemical formula:c14h10o4 Molecular weight:242.22 Specifications Item specification is pecification ii Content(c6h5co)2o228 + 132+1 Water_2.0_4.0 Fineness(series r40/3, ¢200*50/0.075mm test sieve, residue on sieve)_10 Hydrochloric acidtest conformed Ammonium salttest conformed Barium salttest conformed Ph(10aqueous solution)6-9 Heavy metal(as pb)_0.004 Arsenic(as as)_0.0003 Usesbe used to bleach wheat flour. Be stored in cool, dry and ventilated warehouse, free from heat, sunlight, can't be stored together with toxic or harmful goods. 20kg/25kg/paper carton.
Hec 5-100000mpa.S
Dimethyl carbonate
Cement clinker Used in cement industries
Activated bleaching earth Very effective for rice bran, soya oil
Road tech 2000 Is a natural biological road base stabilizer for clay based materials. Non-chemical, non-toxic and environmental friendly product. The cost range is from us$ 0.65 to us$ 1.20 per square meter depending on the depth of road to be stabilized. Freight, duties and other charges extra. Used for city and highway roads, (tar sealed) country and secondary roads. Features: Ease of application Superior stabilization Dust reduction Reduced road maintenance No specialist equipment for application Reduction in premium gravel requirements as a lesser quality can be used. Blend of natural occurring microbes which react with the clay particles producing a natural polymer that replaces the water and air voids between the clay platelets, significantly reducing the clay's ability to absorb moisture. One of the significant benefits of this microbial action, is the microbes ability to move down through the profile past the treated depth and in some cases up to 240 mm deep into the substrate. 20 litre plastic container approximately 20.5 kg.
HI-PCE WR 50 is a high performance polycarboxylate ether , specifically developed a high range water reducing agent mainly used as a raw material to produce different types of high performance water reducing polycarboxylate based superplasticisers.
Dubond's Micro Concrete is supplied as a ready to use dry powder which requires only addition of clean water at site to produce a free flowing non shrink repair micro concrete. This is a cementious material, with additives, which impart controlled expansions characteristics in the plastic state while minimizing water demand. This is specially designed for repairs to damaged reinforced concrete elements, particularly where areas is restricted and where vibration of the placed material is difficult or impossible.
Description YL-SNF-A is a high range water reducer, high concentration naphthalene-based superplasticizer, also named Naphthalene Sulfonate Formaldehyde Condensate (NSF), SNF, PNS and FDN etc. YL-SNF-A (Na2SO4 less 5%) contains no chloride, non-corrosive to steel bars, non-poisonous, odorless, and non-flammable. Thus, it meets the requirements of chemical admixture specifications for concrete, complying with ASTM C 494, Type F. ASTM C 1017, GB8076-2008 and GB50119-2003 etc. Uses 1.YL-SNF-A possesses the features of no retarding, no air-introducing, superplastic high water-reducing and strength enhancing. It has no chloride, low alkali content, low sulphonate, and high purity. It can be widely used in different concretes with less dosage and easy to use. 2.YL-SNF-A can be applied to make flowing, strong or steam-curing concrete. The minimum working temperature can be as low as zero centigrade degree. In steam curing, concrete with superplasticizer has to be strong enough before heating. The steam curing specification has to be pre-tested. It is particularly used as base material for compound admixtures. 3.It can prevent from the alkali-aggregate reaction because of the biggish alkali reactivity of aggregate or the alkali-aggregate reaction in the moist environment. Advantage 1.High water-reducing rate: YL-SNF-A can reduce water 20-30%. It has features of superplasticizer, effectively increases concrete fluidity and reduces water penetration and segregation and improves the encapsulation force of the concrete with reinforcing steel bar. 2.Strengthening: Given the same amount of cement and slump requirement, this product with the dosage 0.5-1.2% can increase the concrete early strength and reinforced effect by 50-100%, 40-70%, 25-60% and 20-60% on day 1, 3, 7, and 28 respectively. 3.High applicability: It can be used with different variety of cement. It is compatible with other admixtures. 4.Low sodium Sulfate content: The aqueous solution has no crystals in winter, which can avoid pipeline congestions when JK-01 NP applied. It is suitable for automatic working. 5.Effective durability: It can modify the structure of concrete and increase the property of anti-seepage, anti-freezing, and carbonization. 6.Easy to use: It can be added directly or used after dissolved in water. It can be used for different working condition and concrete mixer. Specifications Items Criteria Actual results(C¡¨¢0.75%) Appearance -- Brown powder Solid Content % 92 min 92.65 Moisture % 8.0 max 7.35 Fineness (0.315mm remains) % 15.0 max 9.2 PH value 7 - 9 8.5 Sodium Sulfate Content % 5.0 max 3.8 Chloride Content % 1.0 max 0.11 Surface Tension 68-72 Mn/m 71 Cement Flowing Rate 240mm 265mm Water Reducing Rate 20% min 22.3% Steel-bar Corrosion None None Dosage 0.5-1.2% by weight of cement. Exact dosage rates depend on the type of effect sought, quality of cement and aggregates, water/cement ratio and ambient temperature. Therefore, in many cases it is advisable to carry out trial mixes. YL-SNF-A can be added directly or added in after dissolved in water. It can be added during mixing and after-mixing (better). The after-mixing approach can achieve better result. Test Data Sheet Items Dosage rate (Cx%) Water (g) Slump (mm) Water reducing rate (%) Compressive strength (MPa) /Compressive strength rate (%) 1 day 3 days 7 days 28 days Reference concrete 0 2555 82 0 4.34/100 13.70/100 20.19/100 24.06/100 YL-SNF-A 0.75 1986 89 22.3 7.63/173.3 23.85/173.4 30.84/150.7 33.72/137.2 Package, Storage & Shelf Life For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg. It should be stored in a dedicated warehouse that is well-ventilated and dry and keep away from moisture. Shelf Life: Minimum 12 months. After the expiration date, it can be used if testing results is qualified. For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg.
Description YL-08NP is a water reducing, highly effective superplasticizer with a set retarding effect for concrete in hot temperature which delays concrete setting time. It has also high range water reducing for promoting high early and ultimate strengths of concrete. YL-08NP is naphthalene-based superplasticizer compounded by some of high-performance retarder, stabilizer and reinforcing admixtures etc. It complies with ASTM C 494 Type G, GB8076-2008 and GB50119-2003. Uses YL-08NP is ideal concrete admixtures for preparing high-performance and high-strength concrete, mass concrete and long-distance transport concrete etc. t is suitable for working condition under temperature 5-40 ¡æ. Not suitable for being solely applied in the steam curing concrete. Test before applied in anhydrite, dross or similar industrial waste cement. Advantage Has a high efficiency water-reducing, retarding in the initial setting and early strength in final setting, late-enhanced, less slump loss etc. which is extremely beneficial to the transport and to pouring of concrete. Increases initial workability. High ultimate strengths. The concrete of compressive strength, flexural, tensile, impermeability and durability are significantly improved and enhanced. The concrete setting time prolong 1-3h, it can also be adjusted according to the user's demand. It has not affected the strength growth of concrete at different time. Dosage 0.5-1.2% by weight of cement. Exact dosage rates are dependent on the type of effect sought, quality of cement and aggregates, water/cement ratio and ambient temperature. Therefore, in many cases it is advisable to carry out trial mixes.Using during mixing and after-mixing method and properly prolong stirring time to assure even. Specifications Item Norm Item Norm Appearance Lark powder Fluidity of cement 230mm Fineness (0.315mm remains) % ¡¨¹12% Chlorine content Non PH value 7-9 Moisture % 8.0 max Technical Data Sheet Items Criteria Test Results (C¢1%) Water Reducing Rate (%) ¡Y14 24.4 Ratio of Bleeding Rate (%) ¡¨¹100 32.8 Air Content (%) +90 +200 Compressive Strength Ratio (%) 3 days -- -- 7 days Y125 135 28 days Y120 132 Shrinkage (%) 28 days ¹135 109 Alkali Content (%) ----- 2.35 Alkali Content per m3 (kg) ¹1.0 0.1 Chloride Ion Content ----- 0.09 Chloride Ion Content per m3(kg) Prestress Concrete
Description YL-NNO is light brown yellow powder, an anion surface active agent. Easily soluble in water, acid, alkali and hard water. It has good dispersing property and affinity with protein and polyamide. Usage Mainly used for vat dye dyeing, reactive dye dyeing and acid dye dyeing. It can work as dispersant for acid staining pad and pigment pad dyeing; auxiliary for reducing dye powder and slurry. It can also be used in leveling agent in dyeing industry Advantages 1). As dispersant NNO;in disperse dye, vat dye, reactive dye, acid dye and leather dye. It has good grinding effect, hydrotropy and dispersibility. 2). As dispersant in textile printing and dyeing industry: pigment pad dyeing of disperse dye;vat acid dyeing of disperse dye; dye for silk and feather mixture; soluble vat dye dyeing; Etc. also can be used as dispersant for disperse dye and lake making; filler for commercial dye etc. 3). As dispersant in wettable pesticide and herbicide, the dispersibility and solubility of pesticide can be improved. 4). As dispersant in electroplating industry, so that the cladding film can be equal and have a better brightness. 5). As auxiliary tanning agent in leather industry, used together with tanning agent (ratio 1:10) to avoid tanning agent stickwith leather. Can also help to disperse dye to get a better appearance in color. 6). As dispersant for paper industry. After adding NNO into wood pulp to avoid the stain from the condensation ofasphaltum, resin and other material 0.2%-0.5% of the wood pulp weight as dosage is preferable. Can work as precipitator for animal size, 20%-30% of the size weight as dosage is preferable. 7). As dispersant in rubber industry. Can disperse sulfur, accelerant, anti-aging agent and some filler(like zinc oxide, barium sulphate, calcium carbonate etc). 2%-4% of the dry powdeweight as dosage is preferable. Can make NNO into 10% solution, then grind with others in ball grinder. 8). Also can be used in coating, painting, pigment, carbon black etc. 9). Can be used in color lake industry. Specification Item Specification Dispersing rate % 95%min Sodium sulfate content % 5 max pH value 7-9 Insolubles % 0.05% max Content of calcium and magnesium ion, ppm 2000 Package, Storage & Shelf Life For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg. It should be stored in a dedicated warehouse that is well-ventilated and dry and keep away from moisture. Shelf Life: Minimum 12 months. After the expiration date, it can be used if testing results is qualified. For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg