Description HICIDE®NP20 Rapid Sterilization Recovery agent HICIDE®NP20 is an aqueous liquid broad-spectrum bactericide based on organic bromine, which is effective in killing common bacteria, fungi, yeast and molds, and can effectively prevent microbial infestation under low additive quantity. Physical and chemical properties Appearance Colorless to light yellow transparent liquid with slight characteristic odor. PH (25 â??) 3.5-7.5 Solubility (25 â??) Completely dissolved in water, low molecular alcohol and ethylene glycol. Foaming (DIN 53902) No bubbles. Instructions for use It is recommended to add 0.1-0.3% in the first step of the production to add 1/3 of the water, and the remainder is added in the last step; increase in protein, casein and similar high nutritional composition system. The most appropriate amount of additions and their compatibility depends on the actual product conditions of the laboratory test; Melveny Shanghai Testing Center can provide microbial identification, testing and decomposition of preservatives test. HICIDE®NP20 require the use of temperature not higher than the 40â??,ph
OIT-99 2.CAS#: 26530-20-1 Specifications No. Item Description 1 Appearance Yellow transparent dense form liquid or tie crystal 2 Content of Active Substance (%) 99min 3 pH value 1.0max 4 Density (g/ml) 1.03-1.05 Application field Suitable for applications in the industrial oil, plastic, building materials, leather, paint, and textile printing and dyeing areas to protect against mildews Performance characteristics 1. Demonstrate an excellent bactericidal effect; with broad-spectrum, long-lasting features. 2. Low toxicity; easy to operate; can be added at any production step. 3. Applicable in the medium of the pH value in a range of 5 to 9. 4. Good uniformity of dispersion; contain no VOC; with thermal stability. 5. Not combustible and easy to transport and use. 6. Stable in the intense ultraviolet or acid rain environment. Usage andCautions 1. It is recommended to use the concentration of using in the range of 0.1 to 0.5%, depending on the actual applications. This product is also widely used for sterilization of interior and exterior latex paints to protect against mildews; suitable for use in the production of eco-friendly latex paints; it is recommended to adopt the adding concentration of 0.1 - 0.3% depending on the performance and service environment of paints. 2. If it splashes onto the skin, rinse with water immediately to avoid irritation or cauma. 3. This product should be used in the medium of pH 9.5max. 4. Wear protective clothes, rubber gloves, goggles and masks; avoid any contact with the skin, eyes and mucous membranes. Packaging 200 kg per drum. Storage and Transportation To be stored at room temperature in a dark place; with a shelf time of one year If you have any demand about my products.
DCOIT-30 2.CAS#:64359-81-5 Specifications No. Item Description 1 Appearance Light yellow transparent liquid 2 Content of Active Substance (%) 30.0max Application field Suitable for the purposes of preventing corrosion and contamination in marine paints Performance characteristics 1. Used as a broad-spectrum, long-lasting bactericide. 2. Easy to operate; can be added in any production step. 3. Good compatibility with marine paints; not insoluble in water; soluble in oil-based marine paints 4. Thermal stability; easy to use. 5. Low solubility in water, thus bring lasting effects. 6. With the best results proved by up to five years of underwater tests Usage andCautions 1. Suitable for use in all marine paints. Can effectively kill many bacteria and mildews like penicillium notatum, basidiomycetes, aspergillus niger, fusarium, and curvularia. Can be added at any production step for use; it is recommended to adopt the concentration of 5 - 15% (w/w). 2. Operational instruction must be strictly followed. Avoid any contact with the skin. Wear protective clothes, goggles, and rubber gloves in operation. Once any contact with the skin happens, wash the skin immediately with plenty of water and soaps; when it splashes into eyes, wash immediately with plenty of water and buffer solutions. Packaging 180 kg per drum Storage and Transportation With a shelf time of one year when stored at room temperature in a dark, air-tight, and moisture-proof place If you have any demand about my products.
Squiggy - The Clumsy Octopus, 72 cm Look out for the clumsy octopus who might playfully capture you with one of its many tentacles! This soft toy has a squishy feel as the texture suggests and is a great multi-tasker! SKU: LB-835-PPM Categories: Super Soft Velboa Toys, Swishers & Splashers Product ID: 20626 FEATURES 100% premium quality cotton. Perfect for all ages. Perfect for a gift on any special day or holiday. Promotes relaxation with its unbelievably soft material. BASIC INFORMATION High quality environmental protection PP cotton Our high quality plushies appeal to all ages, from toddlers to adults, perfect for play, collecting and cuddling CARE INSTRUCTIONS Plush toys can be gently hand washed with water and soap. Do not squeeze or iron as this may cause damage. SHIPPING INFORMATION Shipping - We offer Worldwide shipping! average delivery time is 7 business days. Specifications Size (IN CM) 72 Weight (grams) 650 Color Purple & Pink Country of Origin India Fun Facts Octopuses have three hearts. Two of the hearts work exclusively to move blood beyond the animalâ??s gills, while the third keeps circulation flowing for the organs. The organ heart actually stops beating when the octopus swims, explaining the species penchant for crawling rather than swimming, which exhausts them.
Our clothing and household textiles are quality checked to a high standard and compressed in to 45KG bales or sewn in to 25KG sacks. Garments identified with holes, rips or those heavily stained and excessively worn are removed. Our shoes, bags and belts are separately sorted in to 25KG sacks. Main category / types of 45KG bales available: - Mixed women's clothing ( May include: dresses, skirts, blouses, t-shirts, fashion clothing, camisoles, shorts, light jackets, swim wear, bras, underwear, socks, business wear, jumpers, hoodies etc.) If a woman can wear it, it may be included. - Mixed kids clothing ( newborn to 14 years old. May include: t-shirts, shorts, dresses, skirts, jeans, socks, jumpsuits, shirts, jumpers, hoodies, light jackets, bibs, trousers, underwear, swim wear etc.) - Mixed men's clothing ( May include: Business work shirts and trousers , t-shirts, jeans, shorts, jumpers, light jackets, jumpers, socks, underwear, work suits etc.) - Mixed winter clothing ( Heavier winter clothing and knits for men, women and kids.) - House hold textiles ( bed sheets, fitted sheets, blankets, pillow cases, dooner covers, cushion covers, kitchen table cloth, light dooners etc) FYI - We also supply soft toys, caps and hats, towels, belts, bras and premium office work suits in bulk.
Portable iStage 1x1m,100-900mm Skymear protable stages and choir risers are used widely for concert,indoor and outdoor,catwalk,trade show,fashion show,church,swimming pool,school,hotel,wedding,event, etc Overview Skymear Staging Systems are the perfect accompaniment to truss systems and roof structures. Skymear has developed a range of complementary products that provide you with one-stop-shop solutions. The Assembly Stage is one of the strongest and most versatile systems on the market for building temporary demountable stages. It is ideal for all your business functions from conferences, award ceremonies and exhibitions to banquets, product launches and concerts. With the stage you can create stunning structures and tailor made stage platforms, entertainment stages or dance platforms. By mounting legs with castors you can also easily convert your decks into rolling risers. l Platform and risers shapes are customized, like triangle, square, rectangle, ladder-shaped, arc-shaped, etc. l Platforms are easily connecting with the risers, easily assembled and disassembled. l Platform and risers are easily transported, packed into flightcases, or trolley. l Risers are light, but very convenient, easily stretching, and folded and can be over lied by each other, so riser heights are adjustable. l Portable stages are used widely for concert, indoor &outdoor, catwalk, trade show, fashion show, swimming pool, school, hotel, wedding, event, etc Aluminum TrussesMobile Truss Clamps, Riser Folding Stage, Rubber Cable Protector Black Dance Floor, long life-span Starlight Curtain, Strong riser Folding Stage Supplier.
WALL GUARD PUTTY is a white cement based product with redispersible polymer and functional additives for application on interior and exterior rough plasters to give a smooth finish. FEATURES :- WALL GUARD PUTTY 1. Provides smooth and uniform finish to rough plasters 2. Good Workability 3. Does not require curing with water 4. Good water resistance 5. Good Tensile Adhesion Strength, Compressive Strength and Flexural Strength 6. Controlled water vapour permeability 7. Excellent abrasion resistance 8. Resists growth of algae and fungi on wall 9. Good intercoat adhesion to emulsion paints RECOMMENDED APPLICATION :- It can be used on all types of exterior cement plasters/interior walls, asbestos sheets, concrete etc PRODUCT TECHNICAL DATA :- COLOURS : White FINISH : Smooth and Matt COVERAGE : 2 coats: 10-15sq.ft/KG up to 1.5 mm thickness in two coat (It may vary from the quoted coverage to factor such as method and condition of application and surface roughness) DRYING TIME : 6-8 HOURS GLOSS LEVELS/SHEEN LEVELS : Silky smooth sheen FLASH POINT (IS101/108 Part 1, Sec 9) : Non- flammable SUITABILITY OF THINNER PAINT Use within 24 hrs. SHELF LIFE 3 years from date of manufacture in original tightly closed containers kept away from direct sunlight and excessive heat. PERFORMANCE DATA :- ABRASION RESISTANCE : Excellent WATER RESISTANCE : Excellent SHELF LIFE : 3 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat. REMARKS : a) Kindly refer to the MSDS for the Saffro Mellow Coatings And Resinswhich gives detailed information on Safety measures while handling the paint. b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire. c) Avoid eye and skin contact. In case of eye and skin contacts, wash with plenty of clean water. d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention. e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling the paint. f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system. g) Do not apply when ambient temperature is less than 10�ºC or if the temperature might drop to this level within 4 hrs of application. h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use. i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.
No. Type Pure Acrylic Emulsion with high sheen. 1 FEATURES It provides a smooth long lasting rich finish with high sheen to the interior and exterior wall. It is washable and most stain can be removed easily by sponging with mild soap solution. The paint film is having good resistance to fungus and mildew. 2 RECOMMENDED APPLICATION STAR valvet glow emulsion is an interior and exterior wall finish that can be applied on all type of smooth plaster, false ceiling, asbestos sheets, concrete etc. PRODUCT TECHNICAL DATA No COLOURS White & other shades as per shade cards 1. FINISH Smooth and high sheen 2. COVERAGE On smooth primer masonry surface by brushing 1 coat: 140-160 sq.ft/ltr 2 coats: 80-90 sq.ft/ltr (It may vary due to factors such as methods and conditions during application and surface roughness etc.) 3. DRYING TIME Surface drying time â?? 10-15 minutes 4. GLOSS LEVELS/SHEEN LEVELS Silky smooth with high sheen 5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable 6. SUITABILITY OF THINNER PAINT Use within 24 hrs. 7. SHELF LIFE 3 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat. PERFORMANCE DATA No ABRASION RESISTANCE Excellent 1. WATER RESISTANCE Excellent 2. REMARKS a) Kindly refer to the MSDS for the saffro mellow coatings & resins STAR velvet glow emulsion which gives detailed information on Safety measures while handling the paint. b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire. c) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water. d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention. e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling. f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system. g) Do not apply when ambient temperature is less than 10�ºC or if the temperature might drop to this level within 4 hrs of application. h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use. i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.
WALL BIND ACRYLIC Cement Primer Water Thinnable No. Type WALL BIND Acrylic Interior Wall Primer (Water Thinnable) is suitable for useas a primer for painting of waterbased wall finishes such as distemper and plastic emulsions. 1 FEATURES WALL BIND has a special features are better whitness and opacity, easy brushing, excellent covering,alkali resistance,quick drying and good filling properties. Provides superior hiding and superior whiteness. 2 RECOMMENDED APPLICATION WALL BIND can be used for priming plastered wall,asbestose,brick work,cement concrete etc. PRODUCT TECHNICAL DATA No COLOURS White 1. FINISH Smooth and matt 2. COVERAGE 1 coat: 130-140 sq.ft/ltr 2 coats: 80-90 sq.ft/ltr (It may vary due to factors such as methods and conditions during application and surface roughness etc.) 3. DRYING TIME Surface drying time â?? 10-15 minutes 4. GLOSS LEVELS/SHEEN LEVELS NA 5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable 6. SUITABILITY OF THINNER PAINT Use within 24 hrs. 7. SHELF LIFE 12 Month from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat. PERFORMANCE DATA 2. REMARKS a) Kindly refer to the MSDS for the saffro mellow coatings & resins Nano Acrylic Cement Primer which gives detailed information on Safety measures while handling the paint. b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire. c) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water. d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention. e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling. f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system. g) Do not apply when ambient temperature is less than 10�ºC or if the temperature might drop to this level within 4 hrs of application. h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use. i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.
No. Type Nano acrylic Interior Wall Primer (Water Thinnable) is an economy water-based primer that enhances the application and finish of interior topcoats. 1 FEATURES Nano Acrylic Cement Primer is water based, Economical interior primer with good whiteness,good coverage and flow and leveling properties. 2 RECOMMENDED APPLICATION Nano Acrylic interior wall primer that can be suitable for priming plastered wall,asbestose,cement concrete etc. PRODUCT TECHNICAL DATA No COLOURS White 1. FINISH Smooth and matt 2. COVERAGE 1 coat: 90-100 sq.ft/ltr 2 coats: 60-70 sq.ft/ltr (It may vary due to factors such as methods and conditions during application and surface roughness etc.) 3. DRYING TIME Surface drying time â?? 10-15 minutes 4. GLOSS LEVELS/SHEEN LEVELS NA 5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable 6. SUITABILITY OF THINNER PAINT Use within 24 hrs. 7. SHELF LIFE 12 Month from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat. PERFORMANCE DATA 2. REMARKS a) Kindly refer to the MSDS for the saffro mellow coatings & resins Nano Acrylic Cement Primer which gives detailed information on Safety measures while handling the paint. b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire. c) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water. d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention. e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling. f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system. g) Do not apply when ambient temperature is less than 10�ºC or if the temperature might drop to this level within 4 hrs of application. h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use. i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.
ULTRA PREMIUM weatherproof interior and exterior emulsion is a smooth, water-based, modified acrylic, interior and exterior wall finish with silicon additives. FEATURES :- ULTRA PREMIUM weatherproof interior and exterior emulsion is specially formulated to withstand extreme tropical conditions of rainfall, humidity and heat ULTRA PREMIUM provides excellent resistance from growth of algae and fungi on the walls. This prevents appearance of black spots due to algal growth. ULTRA PREMIUM provides extremely good protection against alkali and UV degradation, thus ensuring that the shade doesnâ??t fade for a long time and the paint lasts longer. RECOMMENDED USE :- ULTRA PREMIUM Acrylic interior and exterior emulsion is interior and exterior wall finish that can be applied on all type of smooth plaster, asbestos sheets, concrete etc. PRODUCT TECHNICAL DATA :- COLOURS : White & other shades FINISH : Smooth and soft sheen COVERAGE : On smooth primer masonry surface by brushing 1 coat: 140-170 sq. ft/ltr 2 coats: 85-95 sq.ft/ltr (It may vary due to factors such as methods and conditions during application and surface roughness etc) DRYING TIME : Surface drying time â?? 30 minutes GLOSS LEVELS/SHEEN LEVELS : Silky smooth with soft sheen FLASH POINT (IS101/108 Part 1, Sec 9) : Non- flammable SUITABILITY OF THINNER PAINT Use within 24 hrs. SHELF LIFE 18 month from date of manufacture in original tightly closed containers kept away from direct sunlight and excessive heat. PERFORMANCE DATA :- ABRASION RESISTANCE : Excellent WATER RESISTANCE : Excellent REMARKS : 1) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire. 2) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water. 3) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention. 4) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling the paint-this is required for all paints. 5) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system. 6) Do not apply when ambient temperature is less than 10�ºC or if the temperature might drop to this level within 4 hrs of application. 7) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use. 8) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.
Cyanuric acid known as tricyanic acid; white crystals, precipitated from water, with two crystal waters. The taste is slightly bitter, basically non-toxic, soluble in hot water, slightly soluble in cold water, the aqueous solution is acidic, insoluble in cold organic solvents such as alcohol, ether, and benzene. The chemical formula is C3H3N3O3, and there are two isomers, namely ketone and enol structures, which usually exist as a mixture of two isomers Powder and granular and tablet For stabilizer in swimming pool For making TCCA, SDIC,TGIC... Cyanuric Acid stabilizer-Cyanuric Acid(CYA) 2,4,6-Trihydroxy-1,3,5-Triazine Synonym: Isocyanuric acid, Tricyanic acid Molecular Formula: C3N3O3H3 M.W.: 129.1 Property: Odorless white crystalline powder or grain. Item Index Result Appearance White powder White powder Content(%) 98.5 98.6 Moisture(%) 0.5 0.1 PH value(1%solution water) 4.0-4.5 4.1 Ash Content(%) 0.1%max 0.05% Fe2+ (ppm) 5 10 Sulphate 0.5%max 0.05% Ammelide/Ammeline 0.5% 0.18% White degree 90 93
High quality epdm for running track, EPDM Rubber Granules 1.good color fastness 2.High elasticity and wear resistance 3.Acid & Alkali Resistance 4.Aging resistance 5.UV resistant properties 6.Low density for excellent coverage 7.Excellent features for wet poured safety playgrounds EPDM rubber flooring specification 1 Raw material: Supreme EPDM and other components 2 Rubber granule content : 14%, 20%, 22%, 25%, 35%, 40% etc. (we guarantee no less than or more than the requested EPDM content) 3 Colour:red,green,blue,yellow,earth,etc.also can be customized 4 Commonly used Size:0.5-1.5/1-2/2-3/1-4/3-5/1-3mm can be customized EPDM rubber flooring application - athletic running tracks - as infill of synthetic grass - surfaces of tennis courts, volleyball, basketball or handball courts - multipurpose playing fields for schools - resilient surfaces for children's playgrounds - safety zones protecting from injuries around swimming pools and other similar facilities
High quality epdm for running track, EPDM Rubber Granules 1.good color fastness 2.High elasticity and wear resistance 3.Acid & Alkali Resistance 4.Aging resistance 5.UV resistant properties 6.Low density for excellent coverage 7.Excellent features for wet poured safety playgrounds EPDM rubber flooring specification 1 Raw material: Supreme EPDM and other components 2 Rubber granule content : 14%, 20%, 22%, 25%, 35%, 40% etc. (we guarantee no less than or more than the requested EPDM content) 3 Colour: red,green,blue,yellow,earth,etc.also can be customized 4 Commonly used Size:0.5-1.5/1-2/2-3/1-4/3-5/1-3mm can be customized EPDM rubber flooring application - athletic running tracks - as infill of synthetic grass - surfaces of tennis courts, volleyball, basketball or handball courts - multipurpose playing fields for schools - resilient surfaces for children's playgrounds - safety zones protecting from injuries around swimming pools and other similar facilities
High quality epdm for running track, EPDM Rubber Granules 1.good color fastness 2.High elasticity and wear resistance 3.Acid & Alkali Resistance 4.Aging resistance 5.UV resistant properties 6.Low density for excellent coverage 7.Excellent features for wet poured safety playgrounds EPDM rubber flooring specification 1 Raw material: Supreme EPDM and other components 2 Rubber granule content : 14%, 20%, 22%, 25%, 35%, 40% etc. (we guarantee no less than or more than the requested EPDM content) 3 Color: red,green,blue,yellow,earth,etc.also can be customized 4 Commonly used Size:0.5-1.5/1-2/2-3/1-4/3-5/1-3mm can be customized EPDM rubber flooring application - athletic running tracks - as infill of synthetic grass - surfaces of tennis courts, volleyball, basketball or handball courts - multipurpose playing fields for schools - resilient surfaces for children's playgrounds - safety zones protecting from injuries around swimming pools and other similar facilities
We can supply Activated Carbon as follows: Aquanomics unwashed carbons are manufactured under the strict supervision of our skilled and experienced experts. The unwashed carbon has high and effective diffusion properties with a high degree of microporosity. These carbons have a wide application in the liquid phase application and are used for removing undesired color, smell and other impurities. Aquanomics Unwashed Carbons comes in black powdered form. Aquanomics Granular Carbon is used for water treatment including drinking water, groundwater, service water, wastewater, deodorization and separation of components of flow systems. Aquanomics Granular Carbon has a larger particle size as compared to powdered activated carbon. These granular carbon are preferred for the absorption of gases and vapors as well since their rate of diffusion is faster. Aquanomics Washed Carbons is a cost-effective means of maintaining the activity of activated carbons. This washed carbon is manufactured by our experienced proficiency, ensuring effective, unhampered and prolonged application. It is used in aqua applications like swimming pool purification, etc and also in the containment of food and beverages, water purification and pharmaceutical applications
Features: 1. S-PH3000A- J can be operated horizontally and circular , which allows to perform different types of weld (horizontal and circular). The machine is equipped with a control panel, which allows easily and safely setting and performance of the whole welding process.Otherwise according to the userâ??s needs, it is also possible to input the type of material and the dimension of the thermoplastic sheet, and therefore proceed to weld. Each welding cycle is automatically memorized. 2. Welding types: horizontal and circular (on request),S-PH3000A- J is a CNC automatic butt fusion machine, suitable for welding thermoplastic sheets made of HDPE, PP, PVC, PVDFâ?¦. 3. The new steel structure, patented mechanical synchronous drive technology, through the proportional valve, in the weld area to achieve uniform pressure. 4. Control system Siemens PLC, 7-inch color touch screen. 5. Data parameters are automatically selected according to the material a particular welding pressure, temperature and time. 6. 3mm-40mm welding capabilities, special welding thickness of up to 60mm. Range of Application: Manufacture of reservoirs, tanks and containers, manufacture of plastic apparatus, pipeline construction, ventilation systems, serial welding, water treatment systems, scrubbers, environmental technology, swimming pools, transport and logistics.
We are Polo-Epo Organic Tiles Co manufacturing 100% handmade & CE marked tiles. Our tiles are resistant to extremely high temperatures, frost resistant and anti-slip as per EU norms & regulations. It is suitable for indoor and outdoor applications. It is used in indoor floors, outdoor floors, under roofs, gardens, kitchens, swimming pool areas. Apart from all below sizes we produce many special sizes which is not included our below list. We can produce any sizes as per buyer specification. We export 13 to 15 containerâ??s in every month in Italy, Portugal and South Korea market. Tiles are available in a range of sizes and colours, and samples are available on request. 10 x 10 x 2.5 cm 15 x 15 x 2.5 cm 15 x 30 x 2.5 cm 17 x 17 x 2.0 cm 20 x 20 x 2.5 cm 21 x 21 x 2.0 cm 20 x 20 x 2.0 cm 25 x 50 x 3.0 cm 30 x 30 x 2.5 cm 30 x 60 x 3.0 cm
Refurbish garden space, balcony, poolside by interlocking deck tiles from vietnam to bring a unique appearance for your house, experience new things when the new year is coming: - Type: 12-slat, 6-slat, 4-slat - Material: acacia wood + ppco plastic base - Size: 300*300*19/24 mm - Place of origin: vietnam - Color: brown - Features: anti termites, anti-wood aging, less curvature, water resistance, - Application: garden, balcony, swimming pool, landscape - Packing: 9pcs/carton or customers' request - Payment term: t/t in advance, l/c at sight - moq: 35, 000pcs or 40hch as bistro set including 1 table and 2 chairs, camping chairs, and leisure chairs. If you need further information, please feel free to contact us. Looking forward to hearing from you soon. Thank you & best regard, Phuong le (ms.) Global wood corporation/nk vietnam No. 511, dn2, ct3, van khe, ha dong, ha noi, vietnam. Phone: +84383462959 (whatsapp) Email: sale5(at)gwc(dot)vn Website: gwc(dot)vn
e supply live and frozen mud crabs , red king crabs , soft shell crabs , blue crab and blue swimming crab. we are also pleased to present to you the best lobsters and crayfish . our products are of very high grade and price affordable . they are availabe live , fresh/chilled and frozen species available : maine lobster : american lobster (homarus americanus) european lobster (homarus gammarus) spiny lobster : caribbean spiny lobster (panulirus argus) australian spiny lobster (panulirus cygnus) ornate rock lobster (panulirus ornatus) royal spiny lobster (panulirus regius) bamboo lobster (panulirus versicolor) scalloped spiny lobster (panulirus homarus) california spiny lobster (panulirus interruptus) (panulirus palinuridae) smoothtail spiny lobster (panulirus laevicauda) chinese spiny lobster (panulirus stimpsoni) pronghorn spiny lobster (panulirus penicillatus) spiny lobster (panulirus polyphagus) brown spiny lobster (panulirus echinatus) stripe-leg spiny lobster (panulirus femoristriga) green spiny lobster (panulirus gracilis) spotted spiny lobster (panulirus guttatus) blue spiny lobster (panulirus inflatus) japanese spiny lobster (panulirus japonicas) banded spiny lobster (panulirus marginatus) easter island spiny lobster (panulirus pascuensis) longlegged spiny lobster (panulirus longipes)
