Stainless Steel 310S Elbow, Application : Boiler Plate, Container Plate Standard - 310S Thickness - 15-20mm, 20-25mm Certification - CE Certified Product Supply Type - Manufacturer, Exporters, Suppliers, Importer, Trader Products Detail Material - Stainless Steel Thickness - 15-20mm, 20-25mm Width - Shiny silver Certification - CE Certified Technique - Hot Rolled Color - Grey Standard - 310S Application - Boiler Plate, Container Plate, Flange Plate
Approx. Rs 800 / Piece Product Details: Minimum Order Quantity : 50 Piece Usage/Application : Construction Shape : T Profile Material : Stainless Steel Length : 8 Feet Color : Gold , Rose Gold, Black, Blue etc Dimension ; Multiple Available Grade : 304 Country of Origin : Made in India Our Profile Sections are widely usesd for Interior & Exterior Designing. Profile Section is used in many Decorative Applications such as Exterior cladding, Interior decoration, Skirting, Wall Edge Protection, Floor Partitions, Wall Partitions and many more. We can also arrange Retail quantity order for Export in Profiles Sections, Without any types of Damages
Stainless Steel Rod
Stainless steel 904 grade have a stock 2ton
SS304, origin S. Korea available, 100 MT trial, and up to 1000 MT monthly shipments, the loading port will be port of Busan in S. Korea. The payment terms will be TT or LC, the delivery time immediately after receiving the confirnation of the order. The price is CIF to any world safe port.
Product information: The stainless steel banding can guarantee extended service life; and attaching under significant mechanical loads. Minimal breaking load is also different depends on the grade of steel. Jeraâ?? stainless steel straps are available in different sizes to assist your strapping needs of securing with heavy loads. Grades 201 202 304 316 409 1/4" - 6, 4 mm0.015" - 0, 40 mm 3/8" - 9, 5 mm0.020" - 0, 50 mm 1/2" - 12, 7 mm0.025" - 0, 64 mm 5/8" - 16, 0 mm0.028" - 0, 70 mm 3/4" - 19, 0 mm0.030" - 0, 75 mm
Curtain Ring - Stainless Steel Type(Diameter), Rate Normal SS ring (4CM),Rs.4.50 Coating (4CM),Rs.7.95 Antique (4CM),Rs.7.95 Mat Finishing (4CM), Rs.5.90 Square- Normal (4CM),Rs.7.95 Square - Empose (4CM), Rs.7.95 Aluminium (4CM), Rs.5.75 8 Gram (3.5CM),Rs.5.65 Normal (3CM), Rs.4.60 Normal (2CM), Rs.4.40 Normal (1.5CM),Rs.2.65 Normal(1CM), Rs.2.60
We produce all kinds of stainless steel ring including round ring, d-ring, keystone ring and so on, u are welcomed to inquire us.
ABOUT THE METAL SAND 1. Prolong service life of components so as to reduce production cost remarkably. The service life of metal sand as filter material is extended over 3 times than conventional filter materials such as glass bead,sea sand and silicon carbide. 2. Thanks to its high degree of profile ,large specific surface and strong impurities filter capability,the use of metal sand prolongs the service life of components,reduces use of auxiliary materials(strainer and washer,etc.)related to components,cleaning expenses of components and consumption of manpower as well as loss of capacity,etc. 3. Decrease the rate of broken filament and end breakage,the characteristic of irregular concave-convex acute angle in metal sand is far advantageous over conventional filter materials,such acute angle is very high in hardness and not easy to deform under 40Mpa pressure and can well puncture air bubbles in melt and obstruct foreign matters and coagulated particles so as to improve filter precision. 4. Stabilize pressure on components and the process of pressure rise is slow and stable to avoid fluctuation of production and unstable quality due to unstable pressure,and thus metal sand will not change its shape with changes of melt pressure and temperature. 5. Enhance homogeneity and spinnability of melt,stainless steel is a good conductor of heat and can guarantee homogeneity and consistence of temperature of high-temperature melt in sand bunker of components. 6. Stable chemical properties prevent adverse reaction with polyester melt. 7. Convenient use without need of cleaning and drying required for glass bead,sea sand and silicon carbide.We have conducted high-pressure cleaning process during production,so the delivered products are free of dust. THE CONTENT OF ElEMENTS Elements C Cr Ni Mo Si Mn Fe Qualified scope% 0.1-0.2 17-22 4-13 1-3 1.5-3 0.4-0.7 Basicingredient Note:metal contents can be adjusted in accordance with the requirements of customers. PACKING DENSITY(UNIT:(G/CM3) Size micron(micron) Size mesh(mesh) Density(g/cm3) 1651-833 10-20 1.2-1.5 833-350 20-40 1.6-2.0 350-245 40-60 1.65-2.3 245-198 60-80 1.7-2.6 198-165 80-100 1.8-3.2 NOTE: A. Testing method for packing density:place an empty beaker in a certain size cm3 rest on platform,and the metal sand in corresponding size fall freely into the beaker at a place in distance of 20cm from the opening of beaker.Stop falling of sand when the beaker is full of sand with a slight overflow,strike off along the opening of beaker with a flat ruler and weigh the sand,divide the weighed net grams by the volume of beaker is the packing density of this size. B. The above packing density is only for reference,specific packing density for practical use should be determined according to the requirements of enterprises for production sizes and pressure on components.The established sized and corresponding packing densities by both parties should not be altered at discretion and be regarded as important indicators for inspection of incoming and outgoing goods by both parties. C.In addition to common sizes,screening and matching can be performed as required by customers. APPLICATION METHOD OF METAL SAND 1. This metal sand has been strictly cleaned and screened during production without need of cleaning and screening once more during application. 2. Before assembly sizes should be seen clearly and confirmed without error. 3. At the end of each application,please well bind internal bag for residual metal sand to avoid entry of dust and impurities to affect normal use. 4. Several sizes can be used in layers,either one size can be used independently.For matching use of a few sizes,it would be the best to separate with corresponding single-layer stainless steel mesh between layers for better filter effect.The closer to the spinning head,the higher the meshes of sand (the thinner the sand). 5. In accordance with the requirements of productive technology,weigh metal sand and put into sand bunker,knock the case of sand bunker in all directions with copper rod to let sand increase density under vibration,and then compress the surface of metal sand in sand bunker with even end of stainless steel bar (which is approximate 15cm long and must be smooth and glossy)with diameter slightly less than that of sand bunker,and apply approximate 10kg pressure clokwise or anticlockwise and rotate to level the surface of metal sand,afterwards place a dedicated sand pressing bar with smooth and glossy surface in diameter of 1.5mm less than the inner diameter of sand bunker under the press to squeeze metal sand with a pressure of about 11Mpa to maximize its density.Nonhomogeneous densities and different sizes of dischargde filaments in the same sand bunker should be avoided. 6. During assembly of compinents the sand bunker must be filled with metal sand without void,which especially important for assembly of combination of a few sizes. 7. When the metal sand manufactured by our company is used,the speed of pressure rise of components is low and even the pressure does not rise for long time,this is a normal phenomenon;after the pressure rises up to the maximal technological pressure,please replace compinents in time in case that minconforming products are manufactured. 8. This product is a one-off product and cannot be reused after the first use. 9. Since the service life of components is longer due to use of metal sand manufactured by our company,so enterprises using the metal sand should make follow-up records for components loaded in machine.For convinience of quality management,it would be the best to replace components up to the approved service cycle(because as of now it is impossible for chemical fiber enterprises to install pressure gauge at each position),and meanwhile regular silicon dressing of spinning plates should be conducted in order to ensure stable quality and normal continuity of production. SAMPLE FIGURE OF STAINLESS STEEL METAL SAND UNDER HIGHLY MAGNIFYING ELECTRONIC GLASS 50KG
ABOUT THE METAL SAND 1. Prolong service life of components so as to reduce production cost remarkably. The service life of metal sand as filter material is extended over 3 times than conventional filter materials such as glass bead,sea sand and silicon carbide. 2. Thanks to its high degree of profile ,large specific surface and strong impurities filter capability,the use of metal sand prolongs the service life of components,reduces use of auxiliary materials(strainer and washer,etc.)related to components,cleaning expenses of components and consumption of manpower as well as loss of capacity,etc. 3. Decrease the rate of broken filament and end breakage,the characteristic of irregular concave-convex acute angle in metal sand is far advantageous over conventional filter materials,such acute angle is very high in hardness and not easy to deform under 40Mpa pressure and can well puncture air bubbles in melt and obstruct foreign matters and coagulated particles so as to improve filter precision. 4. Stabilize pressure on components and the process of pressure rise is slow and stable to avoid fluctuation of production and unstable quality due to unstable pressure,and thus metal sand will not change its shape with changes of melt pressure and temperature. 5. Enhance homogeneity and spinnability of melt,stainless steel is a good conductor of heat and can guarantee homogeneity and consistence of temperature of high-temperature melt in sand bunker of components. 6. Stable chemical properties prevent adverse reaction with polyester melt. 7. Convenient use without need of cleaning and drying required for glass bead,sea sand and silicon carbide.We have conducted high-pressure cleaning process during production,so the delivered products are free of dust. 50KG
a. Name of product: Stainless Steel b. Purity: 97% c. Price of product: to be discussed with the buyers d. Grade: 304 for 97% pure, 204 for mixed e. Product origin: Myanmar f. Chemical Composition for 304 Pure Stainless Steel:C=0.08, Mn=2, Si=0.75, P=0,045, S= 0.030, Cr= 20, Ni= 10.5, N= 0.10 204 mixed Stainless Steel: C
AISI 430 Stainless Steel with any brush type. The size could vary in accordance with your needs. All products are CE certified and necessary documentation could be provided. The products are covered with a protective cover film.
Conventional hole diameter: 2.5mm 3.2mm 3.5mm 4.2mm 4 specifications, red needle can be interchangeable, a punch can play a number of pliers specifications, if you buy a 3.5 punch, but also want to play 4.2 Of the hole, and then buy a set of 4.2 red punch can be used, the use of attention, 3.5mm punching pin should be used with 3.5mm rushed to use, or do not wear, a long time punch red can be used angle grinder gently Grinding can continue to use -
Grade(uns): Austenitic stainless steel: 304/304l/304h(1.4301/1.4306/1.4948); 316/316l(1.4401/1.4404); 316ti(1.4571); 321(1.4541);309s (1.4833); 310s(1.4845); 317l(1.4438)321h(1.4878); 347h (1.4550); super austenitic stainless steel: 904l, Duplex stainless steel: 2205(1.4462); s32304, (1.4362);s31803, 2507 (s32750), s32760(1.4501);s32101(1.4162); Martensitic stainless steel:410(1.4006), 410s(1.4000), 420(1.4021) Ferritic stainless steel:405(1.4002), 430(1.4016) Outside diameter:6 - 830mm Wall thickness:0.50 - 60mm Standards(norm) En 10216-5; din 17456, din 17458, din 2462, din 17455 gb/t14975; t14976; t13296; gb5310; Astm a213, a269, a312, a511, a789, a790, a928, a999, a1016, astm b161, astm b163, astm b165, astm B167, astm b338, astm b407, astm b423, astm b619, astm b622, astm b626, astm b668, astm b677, astm b829 Jis g3459, jis g3463, jis g3446, jis g3447, jis g3448, jis g3468 Gost 9940;gost 9941;
Wuxi Hao Yiu metal main stainless steel rods: stainless steel round bar, stainless steel hexagonal bar, stainless steel bar, stainless steel ground rods, stainless steel bar, stainless steel half rods, stainless steel oval bar, flat bar, angle iron, iron and so on. Stainless steel rod material: SUS316, 316L, 316F, 301, 302, 303, 303F, 303Cu, 304, 304L, 304F, 309S, 310S, 310, 310S, 321, SUS630, SUS631420F, 430F, 416F, 1214, 1215, 45#, 1045, A3. Stainless steel rod specifications: Rod: Ф0.7-Ф300 hexagonal rods: H2-S55mm bar: 2*2-75*75mm. "Non-standard can be customized according to customer requirements" Stainless steel surface requirements:: polishing, grinding, black rod, wire, knurled, pulling the flowers, the company is good, no trachoma, crack-free, uniform hardness, good machinability, corrosion protection performance. My company has been adhering to the "quality of survival, to the integrity and development" business philosophy, the highest quality-best prices, back to old and new customers. Company products are widely used in home appliances, kitchen equipment, food, medical devices, metal hose, shipping, computer accessories, cell phone parts, machinery manufacturing, automotive parts and construction, industry and other fields. Company based on customer-oriented, customer first, honest, thought of this, take the quality as the life, pay attention to after-sale tracking service, mutual benefit, common development is our service. Your phone, fax us a bridge, your needs, that is my responsibility, look forward to serving you, create brilliance! if you want more information, please contact our company.
Thickness: 0.02mm-4mm, width: 3.5mm-1550mm, can be customized by non standard! With the domestic stainless steel (imported) stainless steel strip: stainless steel tape, stainless steel strip, stainless steel stamping, precision stainless steel belt, stainless steel belt, stainless steel mirror cold rolled, hot rolled stainless steel, stainless steel, stainless steel belt, stretching with etched polished stainless steel belt, stainless steel belt, stainless steel belt, hard soft hard belt, stainless steel in high temperature resistant stainless steel belt. Cold rolling strip Take 1. "stainless steel belt / coil" as raw material and rolled into cold rolling mill at room temperature. The conventional thickness ranged from and the width was from ; 2. [cold rolled steel strip / coil] has the advantages of smooth surface and smooth surface, high dimensional accuracy and good mechanical properties. The products are mostly rolled and can be processed into coated steel sheets; 3.The production process of cold rolled stainless steel strip / roll: 1, pickling, rolling, lubrication, and process at room temperature. The formation and the annealing, cutting, packaging, but the arrival of the hands of customers. Hot rolled 1.A strip of steel with thickness 1.80mm-6.00mm and width 50mm-1200mm is made by hot rolling mill. 2.[hot rolled strip / sheet] has the advantages of low hardness, easy processing, good ductility and so on. 3.The production process of hot-rolled stainless steel strip / roll: 1. The high temperature lubricating rolling, pickling, annealing, 3, 4, smooth process, the precision cutting and packaging, but the arrival of the hands of customers. Difference between hot and cold
Stainless steel shot long life time: 6000 times Size: 0.3-3mm High efficiency Surface treatment Sus304 stainless steel shot and stainless steel cut wire shot: Size: 0.2mm-2.0mm Hardness: 308-509 hv (32-50hrc) Chemical elements: c:
304 Stainless Steel Security Screen for Super Hardness 304 stainless steel security screen is also called bulletproof security screen or crime safe mesh screen. Its 304 stainless steel material offers excellent fire prevention, high temperature resistance, high strength and good toughness properties that can withstand damage from knife, ax, pliers and scissors. At the same time its powder coated layer further strengthens rust resistance and anti-corrosion properties which make the security screen have a long service time. And if you have a baby, it can also prevent babies and children from climbing or accidentally falling, this aids to ensure the safety of children. Furthermore, 304 stainless steel security screen keeps houses bright, natural flow of fresh air 24 hours a day and reduces unnecessary air conditioning running, it not only save energy but also reduce air conditioning that brings sub-health, this gives you and your family a healthy body and mind. 304 stainless steel security screen is suitable for houses, office buildings, suburbs, banks, airports, resorts, hospitals, schools, nursing homes and other living areas. Specifications: Product name: 304 stainless steel security screen. Weave type: plain weave. Material: 304 stainless steel wire. Surface treatment: powder coated, or PVC coated. Color: black. Other colors like gray and white are also available at your requests. Wire diameter: 0.9 mm. (0.6 mm - 1.2 mm is also available.) Mesh opening: 11 mesh x 11 mesh. (Besides 10 mesh x 10 mesh, 12 mesh x 12 mesh and 14 mesh x 14 mesh, non-standard mesh openings are also available at customers' requests.) Dimensions: Length: 1500 mm, 2000 mm, 2400 mm, 3000 mm. Width: 750 mm, 900 mm, 1000 mm, 1200 mm, 1500 mm. Note: Special dimensions are also available according to your requirements. Guarantee: ten years. Packaging: Each piece of 304 stainless steel security screen is wrapped with plastic film, and then packaged in wooden cases. 304 stainless steel security screen rolls can be wrapped by water-proof paper or plastic film, and then packaged in wooden cases or on pallets at your requests.
SS Expanded Metal - Corrosion Resistance, good strength Stainless steel expanded metal is made of stainless steel metal sheet, through die slitting and stretching to form uniform diamond shaped openings. In the manufacturing process, no material is lost, and it offers savings in weight, as well as free passage of light, liquid, sound and air. Stainless steel expanded metal is more rigid than an equal weight of solid steel plate or wire mesh, making it popular in architectural and commercial areas. It is worth mentioning that 18 gauge (0.05" thick) 304 stainless steel and 316 L stainless steel are materials that commonly used. But there is difference between them, so choose suitable material for your needs, and the following information will help you learn more about stainless steel expanded metal. Feature Stainless steel 304 for anti-rusting and heat resistance. Stainless steel 316 has more corrosion resistance. Easy to be welded and cut for your ideal form. Resistant to high temperature and food grade stainless steel especially designed for BBQ grill. High mechanical strength for many applications that need large load bearing. Specification Material: stainless steel 304, 316, 316 L. Types: stainless steel - flattened expanded metal (more attractive than raised type), stainless steel - raised expanded metal. Specification - stainless steel expanded metal Style Strand size Design size Open area (%) Width (inch) Thickness (inch) SWD (inch) LWD (inch) SSEM1/2" - #18 0.080 0.050 0.500 1.20 70 SSEM1/2" - #18F 0.090 0.040 0.500 1.26 60 SSEM3/4" - #18 0.106 0.050 0.923 2.00 89 SSEM3/4" - #18F 0.118 0.040 0.923 2.10 77 SSEM1/2" - #16 0.087 0.062 0.500 1.20 70 SSEM1/2" - #16F 0.099 0.050 0.500 1.26 60 SSEM3/4" - #16 0.106 0.062 0.923 2.00 83 SSEM3/4" - #16F 0.118 0.050 0.923 2.10 75 SSEM1/2" - #13 0.120 0.093 0.500 1.20 58 SSEM1/2" - #13F 0.132 0.080 0.500 1.26 56 SSEM3/4" - #13 0.108 0.093 0.923 2.00 78 SSEM3/4" - #13F 0.120 0.070 0.923 2.10 74
Product description Material: brass steel, stainless steel Size:according to your need Surface treatment:polish/chrome or nickel plated Application:electric box, cabinet, industrial door, equipment, furniture Test:salt spray test, tension test Certification:sgs, rohs Moq:5000 pcs Company information The main products of seed fasteners industrial firm are circular fixed handle, elliptical fixed handle, 90¢x fold-down fixable carry handle and fixable carry handle. Genuine factory supply with quality assurance for absolute satisfaction of customers. Packaging details: Box, carton and per customers requested
