TurboFleet 15W-40 is a premium quality high performance rnultigrade engine oil of SAE 15W-40, formulated using high quality base oils together with multifunctional additive. APPLICATION TurboFleet 15W-40 is for use in modern day diesel and petrol engines, for both turbo- charged and naturally aspirated� light,� medium� arid� heavy-duty� passenger� and commercial vehicles� and� industrial� equipment� operating� under� the� most� severe technical and service conditions. BENEFITS Suitable for use in all ambient temperature conditions due to the� multigrade properties. Ensure long drain intervals due to the anti-oxidant, anti-rust and anti-wear properties designed for heavy-duty services. Viscosity variation is minimised due to minimised oxidation. Reduced wear ensures maximum efficiency throughout engine life. Can be used as one grade for all engine in the fleet, regardless of make.
CHEMICAL CHARACTERISTICS: Free Fatty Acid: 0.1 - 0.15% max Peroxide Value: 1.0 - 2.0 meq/kg max Color (Lovibond): 12.0 - 15.0 Yellow / 1.5 - 2.0 Red Iodine Value (Wijs): 100 - 122 Moisture: 0.05 %max AOM: 20 hrs min Cold Test: 5.5 - 12 hrs min Refractive Index @ 40oC: 1.460 - 1.467 Specific Gravity @ 25oC: 0.914 - 0.920 Saponification Value: 182 - 193 Smoke Point: 460 - 530oF Flash Point: 610 - 640oF Fire Point: 670 - 690oF FATTY ACID PROPERTIES: C16:0 Palmitic 3.0 - 5.0% C16:1 Palmitoleic 0.2 - 0.3% C18:0 Stearic 1.0 - 3.0% C18:1 Oleic 56.0 - 76.0% C18:2 Linoleic 10.0 - 24.0% C18:3 Linolenic 4.0 - 13.0% C22:1 Erucic 0.2 - 1.8% FATTY ACID DISTRIBUTION: Saturated 4.3 - 7.4% Monosaturated 54.4 - 65.0% Polyunsaturated 27.2 - 37.0% CRUDE CANOLA/RAPESEED OIL SPECIFICATIONS: Free Fatty Acids (As OLEIC) Molecular Weight 282-Basis: BASE 1.00% MAX. 1.25% Moisture and Volatile Matter: 0.20% MAX. Density (Specific Weight) at 25 C and 4 C Min. 0.9180 Max. 0.9225 Flash Point: MORE THAN 121 (250 F) Saponification value Min. 188 Max. 198 Impurities (Insoluble in Petrol Ether): 0.10% MAX. Unsaponifiables Matter (test as per N.O.P.A.): Max. 1.50 pct. Sediment (Gardner Break Test): 0.10% MAX. Lecithin (expressed as Phosphorous): 0.02% MAX. Color Index (MG Iodine) (Lovibond Cell 1 inch): 50-60 Yellow and 5-6 Red. Refractive index at 20 degrees C: 1.505 to 1.512 Halphen reaction Negative Density (at 15�° C): 900-930kg/m3 Flash Point: 220�°C ( closed up, Pensky-Martens method) Calorific value: 35.000 kJ/kg Kinematic viscosity: 38 mm2/3 (40�°C) Coke deposit: 0.4 mass-% (Conradson procedure) Iodine value: 100-120g/100g Sulphur content: 20mg/kg Neutralizations number: 2,0mg KOH/g Phosphorus content: 15mg/kg Water content: 75mg/kg Ash: 0.01 mass%
We are the producer of the best Iranian saffron. We send the best quality saffron at the best price to all over the world. Our customers confirm it.
We have 20 styles of tiles. All of them AAA grading and quality. The tiles are backed up by a performance guarantee. Shipment is only by container. The contracts are preferably by year. For example 2 containers a month for a year. There are different prices for 24 containers a year, 48 containers a year, and over a hundred containers a year. 60*60 1382 square meters 40 box each pallet 24 pallet 960 boxes 40*40 1579 Square boxes 84 boxes 20 pallets 1680 boxes 24 and 20 pallets per container
1- Product: Soya Bean 2- Origin: BRAZIL 3-SPECIFICATION: Commodity: Soya Bean â?? As per ANEC 41. Oil content basis: 18.5% (AOCS Ac 3 â?? 44) with non-reciprocal allowance of 1% for each 1%, fractions in proportion, in Buyer's favor for any deficiency; Moisture maximum: 14%; Foreign matter basis: 1% maximum 2% with non-reciprocal allowance of 1% for each 1%, fractions in proportion; Damaged beans: Basis 8%, maximum 8.5% with non-reciprocal allowance 2:1, fractions in proportion, of which maximum 4% heat damaged and burned (being maximum 1% burned) and 6 % moldy; Broken beans: maximum 30%; Greenish beans: maximum 8% Free from poisonous seeds / husks: Tolerance 1 particle of treated vegetable seeds with unknown level of toxicity for each 1 kg sample at each lot of 5,000 metric tons loaded and max 0.005% castor seed and/or castor seed husks. Crop: 2018/2019 9- Payment: 30% in advance against Proforma Invoice and contract signed and 70% against LC opened for the balance value of the contract. Both procedures must be done together. *Once proposal accepted we will send the terms /Draft of LC. 10 - Inspection: Quality and Quantity Weight by SGS or equivalent at seller cost at the Loading Port. 11 - Packing: Bulk. 12 - Procedures: - Buyer and Seller fix the price and firm this proposal - Seller issues Performa invoice and Contract. - Contract is signed and between Global Petrol Inc and Buyer - Buyer makes the down payment and open the LC. - Start the shipments within 30-45 days We want to thank your attention. We look forward to receive your confirmation for further details.
- 80W with pure white lighting color. - Over 10 cloudy days long lighting time. - With 10 lighting options and controlled by the remote controller. - Adjustable solar panel and LED panel for increasing the charging efficiency and lighting area. - Working temperature:-20â??~65â??
Liquefied petroleum gas or liquid petroleum gas (LPG or LP gas), also referred to as simply propane or butane, are flammable mixtures of hydrocarbon gases used as fuel in heating appliances, cooking equipment, and vehicles. It is widely used alternative fuel. It has substantial reserves due to its dual origins from natural gas processing and crude oil refining. Liquefied Petrol Gas (LPG) powered passenger cars have about 10% lower tailpipe CO2 emission than comparable gasoline powered cars. When compared to a diesel car, there is no significant CO2 emission reduction per km driven; however, LPG powered vehicles do have substantially lower NOx emissions than diesel powered vehicles.
D2 is a refinery abbreviation for Gasoil. It is the second distillate from the crude oil, and can be used without reformers and additives. So, the first engines used D2 as fuel before petrol cars as we know them today was invented. That is because the engine invented by a German called Diesel, requires no spark plugs. The diesel engine will ignite and combust when the pressure increases so that the heated plug makes it explode. Here we get the name Diesel since the same principles are used in diesel engines today. However, automotive diesel that you fill has additives that the refinery will add to make the engine more efficient and also easier to start in the winter. Diesel changes flash point in the winter. It also has additives to absorb water that condense. If you use summer diesel in the winter, you will get better mileage, but your fuel pipes may freeze and can also burst, and the wax makes the diesel flow thicker.
Used Engines HS Code 840820 PRICE = US$1,800/PIECE CIF ORIGIN: THAILAND PACKAGE: TONS MIN ORDER:5 PIECES DESCRIPTION There are several types of engines used in automobiles. The car engine types are generally described based on two factors: the fuel type and engine layout/number of cylinders (cylinder configuration. One of the most common types of engines is petrol and diesel engines. But that's a generic way to describe a car engine. SPECIFICATION General Engine Specifications Basic Engine Specifications I-6, 4-Stroke-Cycle-Diesel Displacement .......................................................................... 12.88 L (in3) Rated engine speed .................................................................... 2300 rpm High idle speed ........................................................................... 2530 rpm Low idle speed (programmable) ................................................... 550 rpm Peak torque ......................................................... 3,355 N m @ 1200 rpm Bore ....................................................................................... 135 mm (in) Stroke ...................................................................................... 150 mm (in) Aspiration .................................. Supercharged-Turbocharged-Aftercooled Governor ............................................................................................. ECU Fuel system type .................................................................. Common Rail Length ........................................................................... 1960 mm (77.1 in) Length to flywheel housing ........................................... 1476 mm (58.1 in) Width ............................................................................. 1195 mm (47.0 in) Height ............................................................................ 1117 mm (43.9 in) Weight, net dry (approx.) ................................................1672 kg (3686 lb) Rotation (from flywheel end) .......................................... Counterclockwise Flywheel housing/flywheel .................................................... SAE No. 01M Flywheel teeth ....................................................................................... 155 Tolerances Power ............................................................................................... +/- 3% Exhaust Stack Temperature ............................................................ +/- 8% Inlet Air Flow .................................................................................... +/- 5% Intake Manifold Pressure ............................................................... +/- 10% Exhaust Flow ................................................................................... +/- 6% Specific Fuel Consumption .............................................................. +/- 3% Heat Rejection ................................
LPG Multipoint Sequential Injection System Conversion Kits: 1. LPG Sequential Reducer/Regulator 2. ECU set, including cables, water temperature sensor, micro-switch, map sensor. The ECU Programming System is named Mach Pro, support 11 languages. It is for 3/4cly, for 6/8cly is not available now. 3. Injector Rail-4cyls 4. Gas Filter 5. High pressure steel pipe (suit to both LPG and CNG in China) 6. Low Pressure Hoses 7. Fittings in bag, for 4clys lpg direct injection system installation 8. Not Include Items here: LPG tank and multivalve, Brackets for fixing the tank, filling valve and filling hose, interface cable (for ECU connect to computer to calibrate, 3pcs/100sets for free; It is special, other ones may not suit to our kits, if buyer order more in future, we can provide 1pcs for free here as sample test). Products production are approved by ISO 9001:2000 Languages supported by the ECU: 1) English 2) Chinese 3)Polish 4) Russian 5) Thai 6) Turkish 7) Spanish 8) French 9) German 10) Dutch 11) Italian. Carton:29*29*20cm.
New vehicle distress sale. Std new vehicle unused with all std accessories included
It has been designed and manufactured to cater for the demand for a compact diesel fuel dispenser for private use. That is easy to install. It can be fitted to a wall, directly on the tank by means of the quick coupling or on a column. In terms of low running costs, compact dimensions and flexibility, together with all-round efficiency.Normally configure, self-suction vane pump, mechanical flowmeter, 4 meter hose, automatic nozzle. (mechanical flowmeter can fit for customersí» demand in gallon or litre). Technical performance Medium Diesel , kerosene Flow rate 20l/min-60l/min Power Ac220vía10% 50hz, ac110vía10% 50hz 0.375kw Max.Pressure 3bar Inlet&outlet Bsp1í¦&bsp1í¦ Precision ía1.0% Digital 4 digit subtotals(max.999.9litres), 8 digit totals
Made completely of brass, mesh filter is used.coil operation starts only @ 9 vlt.
This a 4stroke petrol rear engine 173.2cc capicity three wheeler similar to bajaj
Monel 401 has excellent strength and plasticity, and has good pressure processing performance in both cold and hot states. It is a corrosion-resistant alloy with large dosage, wide application and excellent comprehensive performance. The alloy has excellent corrosion resistance in HF and F2 media, and is one of the few important materials that can withstand hydrofluoric acid. An important feature of this alloy is that it generally does not produce stress corrosion cracks and has good cutting performance. A kind of Monel alloy, its alloy structure is a high-strength single-phase solid solution, 3 a nickel-based alloy similar to Monel 400, and the corrosion resistance of the metal is fundamentally obtained by hindering the migration of charged particles through the discharge process of hydrogen ions. Obtained, the addition of 30% Cu by mass fraction minimizes the corrosion rate of TH, Ni in F, Cl and other halogen element ionic media, and the higher the Cu content, the better the resistance to sulfuric acid and phosphoric acid. Adding mass fraction to Monel 401 55% Cu improves the corrosion resistance of the alloy in reducing acids. Application fields: Wirewound Resistors bimetal contact Electrical and Electronic Applications Marine Engineering Chemical and Hydrocarbon Processing Equipment petrol and fresh water tanks Distiller degas heater Boiler feed water heaters and other heat exchangers Valves, pumps, shafts, fittings and fasteners Industrial heat exchanger Chlorinated solvents Crude distillation tower We can provide the following the form:Monel alloy401 coil; Monel alloy 401 strip;Monel alloy 401 plate; Monel alloy 401 sheets; Monel alloy 401 tube; Monel alloy 401 pipe;Monel alloy 401 flat; Monel alloy 401 bar UNS:N04401
What is s Solar On-GRID system ? On grid solar power system is a solar power generation system where it is connected to the utility grid. The electricity produced by the system is routed to the grid from where it is used to run the various appliances. The excess power at any point of time is transmitted back to the grid. Description : We do SITC ( Supply , Installation , Testing , Commissioning ) of Solar On-grid / Grid Tied plants from capacities ranging from 3 K.watt to 1000 K.watt (1 M.watt) for all applications like Industrial , Commercial and Residential through Net-Metering . We do deal with both Ground Mounted and Roof Mounted system installations. We carry out Solar system installations all across India ( from Jammu Kashmir to Tamil Nadu and from Gujarat to Assam ) . Till time we extensively worked in states like Rajasthan , Maharashtra , Gujarat , Odisha , Uttar Pradesh , Madhya Pradesh , Karnataka , Tamil Nadu , Andhra Pradesh. Proper requirement analysis (energy consumption analysis) will be done and accordingly system will be designed by using proper design tools also considering proper load bearing and wind bearing capacities w.r.t. co-ordinates. Installation , Commissioning will be carried out by trained and certified team in professional way and within stipulated time. Safer installation will be done by providing proper protection systems , by proper cabling through conduits and also by providing proper earthing and lightning arresters . Round the clock service support is available & free quarterly service visits will also be provided. IOT ( Internet of Things) enabled Inverters will be provided and complete generation data can be viewed at your fingertips in mobile application . Even troubleshooting can be done over the air ( OTA) . We use only quality material of Tier 1 brands / Globally renowned brands only and offer our best solutions at all times . Facility of AMC for Solar plants is also available Warranty of individual components : Solar panels will be coming with 15 years of warranty and upto 25 years of performance guarantee , which states percentage efficiency of generation would be greater than 90 % at the end of 15th year and will be greater than 80% at the end of 25th year Inverters comes with standard warranty of 5 years . Same can also be extended upto 10 years . Applications : Camp offices / Site offices Production Plants - Batching plants , Hot Mix Plants , Crusher Plants Labour camps Hospitals Production Industries Rice Mills Shopping Malls Residential Societies Toll Plazas Cold Storages Individual Houses Stock Yards Godowns Petrol Bunks Commercial Showrooms Corporate offices Clubs
What is s Solar On-GRID system ? On grid solar power system is a solar power generation system where it is connected to the utility grid. The electricity produced by the system is routed to the grid from where it is used to run the various appliances. The excess power at any point of time is transmitted back to the grid. Description : We do SITC ( Supply , Installation , Testing , Commissioning ) of Solar On-grid / Grid Tied plants from capacities ranging from 3 K.watt to 1000 K.watt (1 M.watt) for all applications like Industrial , Commercial and Residential through Net-Metering . We do deal with both Ground Mounted and Roof Mounted system installations. We carry out Solar system installations all across India ( from Jammu Kashmir to Tamil Nadu and from Gujarat to Assam ) . Till time we extensively worked in states like Rajasthan , Maharashtra , Gujarat , Odisha , Uttar Pradesh , Madhya Pradesh , Karnataka , Tamil Nadu , Andhra Pradesh. Proper requirement analysis (energy consumption analysis) will be done and accordingly system will be designed by using proper design tools also considering proper load bearing and wind bearing capacities w.r.t. co-ordinates. Installation , Commissioning will be carried out by trained and certified team in professional way and within stipulated time. Safer installation will be done by providing proper protection systems , by proper cabling through conduits and also by providing proper earthing and lightning arresters . Round the clock service support is available & free quarterly service visits will also be provided. IOT ( Internet of Things) enabled Inverters will be provided and complete generation data can be viewed at your fingertips in mobile application . Even troubleshooting can be done over the air ( OTA) . We use only quality material of Tier 1 brands / Globally renowned brands only and offer our best solutions at all times . Facility of AMC for Solar plants is also available Warranty of individual components : Solar panels will be coming with 15 years of warranty and upto 25 years of performance guarantee , which states percentage efficiency of generation would be greater than 90 % at the end of 15th year and will be greater than 80% at the end of 25th year Inverters comes with standard warranty of 5 years . Same can also be extended upto 10 years . Applications : Camp offices / Site offices Production Plants - Batching plants , Hot Mix Plants , Crusher Plants Labour camps Hospitals Production Industries Rice Mills Shopping Malls Residential Societies Toll Plazas Cold Storages Individual Houses Stock Yards Godowns Petrol Bunks Commercial Showrooms Corporate offices Clubs
Full set 4CYL CNG multipoint sequential injection system conversion kits 1. CNG sequential reducer/regulator, integrated with solenoid valves 2. CNG pressure gauge 3. ECU set, including cables, water temperature sensor, micro-switch, map sensor. The ecu programming system is named mach pro, support 10 languages; It is for 3/4CLY, for 6/8CLY is not available now. 4. Injector rail-4CYLS 5. Gas filter 6. High pressure steel pipe/tube, suit to lpg also in china, replace copper tubing. 7. Low pressure hoses 8. Fittings in plastic bag Products production are approved by iso 9001:2000: Languages supported by the ECU: 1) English 2) Chinese 3)Polish 4) Russian 5) Thai 6) Turkish 7) Spanish 8) French 9) German 10) Dutch 11) Italian. Carton:29*29*20cm.
Hard chrome plated around bar : 1.. Supply condition Ground and chrome plated 2. Chrome thickness 20 to 30 micron 3. Surface roughness Ra0.2 micron and rt2 micro 4. Tolerances on dia Iso f7 on the diameter 5.Ovality Half of the tolerance iso f7 6. Straightness 0.2mm/m 7. Surface hardness 850-1150hv (vickers 100g) 8.Cohesion No cracks, breaking or detaching after thermic shock(warming up at 300 celsius degrees and cooling in water) 9 .Porosity Test according to iso 1456/1458 and result yaluation according to iso 4540 rating 8-10 10 corrosion resistance Test in natural salt spray according to astm b 117-72hours Results evaluation according to iso 4540 rating 7-10 11. Weldability Good 12. Packing Anti rust oil to be applied on material and each rod to be packed in paper sleeve
We are Chinese manufacturer of seamless cylinder tubes, include cold drawn tubes, honed tubes, precision tube, skived and burnished tubes and chrome bar, piston rods For tubes: Material: St52, E355, A106B, CK45 and so on ID size: from 50 to 400mm ID tolerance: H8 Roughness: 0.4 Max Purpose: for hydraulic cylinder or pneumatic cylinder We are equipped with honing machine, cold drawn machine, skived and burnished machine, furnace and so on. For chrome bar: CK45, f7, usually chrome thickness 20-30 microns. product keywords: cold drawn steel pipe,hydraulic steel tube,hydraulic cylinder pipe,honing pipe,cylinder hones,cold drawn seamless tube,hydraulic cylinder honed tube,cylinder honed tubing,hydraulic pipe,hydraulic tube,honed tube,pneumatic tube,pneumatic pipe,chrome tube,skived and burnished tubeï¼? precision tube, precision pipe, chrome bar, piston rods, chrome shaft
