MSH Split Case Pump Size (discharge): 1 inch to 32 inch Capacity: 3.4~ 15000 m3/hr Head: 8.6~140m Efficiency:Up to 92% Materials:Cast iron,SS 304,SS 316,Bronze etc MSH Split Case Pump Introduction: MSH Split Case Pump is Horizontal, Split-casing, and Double-suction centrifugal water pump. Double Volute casing is used to contract the axial force due to high head to extend the serve lift time of bearing. Because of the short distance of two bearing, the shaft is shortened to avoid much vibration.. Closed and Circulated cooling system is applied within the sealing house.The Shaft sleeve and O-ring are used to avoid any connection between the shaft and fluid. MSH Split Case Pump Features: Both inlet and outlet of this pump are placed under the axial line,, the pump casing is opened in the middle so it is unnecessary to remove the water inlet and outlet pipelines and motor.if repaired The pump moves CW viewing from the motor side. The pump moving CCW can also be made . Both pump casing and cover form the working chamber of the impeller and there are threaded holes for mounting vacuum and pressure meters on the flanges ant both inlet and outlet have water draining plug on the lower side of flange The impeller is static-balance and dynamic balance tested, fixed by the the side nuts and the Shaft sleeve nuts and its axial position can be adjusted via the nuts and axial force will be get balanced by means of the symmetrical arrangement of its blades, there may be residual axial force which is borne by the bearing at the axial end. This pump shaft is supported by two centripetal ball bearings, which are mounted inside of the bearing chamber on both ends of the pump and lubricated with grease. The double suction seal ring is used to reduce the leakage.. This pump is driven directly via flexible coupling.(V-belt driving will be available if required). The shaft seal is mechanical seal or packing seal . MSH Split Case pump Parameter Selection Table: Pump model Capacity(m3/h) Head(m) Speed(rpm) Power(KW) MSH150 112--220 35--84 2900 30--55 MSH200 160--351 31--100 2900 37--110 MSH250 324--612 8.6--65.1 1450 22--132 MSH300 504--1663 8.7--140 1450--1470 22--680 MSH350 745--1570 10--125 1450--1470 55--630 MSH400 900--1620 32--85.5 980--1480 440--500 MSH500 1150--3800 10.6--108 740--970 110--800 MSH600 2300--4000 13--80 730--970 145--730 MSH700 2111--4896 39.5--99.5 742--980 397--1252 MSHS800 3960--6878 23--84 600--750 450--1600 MSH1000 6600--9900 32--52 600 1250 MSH1200 5832--14400 6--95.7 500--745 710--3450 MSH Split Case pump On-site Application: MSH split case pump is suitable for transporting pure water or liquids with physical and chemical properties to water. Suitable for mine Suitable for water supply and drainage in factory. Suitable for power station. Suitable for urban water supply and drainage Suitable for flood control.
Dc/ac motors I am an exporter in line with dc/ac motors from china for several years.I have special ac/dc motor manufacturer , dongyang dongzheng motor coporation, ltd, who has passed the iso9001:2000, ccc and ce certification.Their products inchudes ac/dc gear motors, worm gear motors, brushless motors, planetary gear motors, etc.With the rich experience on the motor, i will supply you favorite motors with excellent quality but at the most resonable price.I hope we can start a pleasant cooperation! Diverse, according to your request
material: steel(Gcr15) core size:20mm out diameter:47mm width:14mm Radius:1.0mm Dynamic load;12.8KN static load:6.65KN rotating speed: 14000 grease/18000 oil ball qty:8 weight:106g
Three Phase Induction Motor Speed Controller Trainer - BRAND - VIJAYANTA, INDIA 1. Study of Three Phase Induction Motor Speed Controller Trainer, With motor generator set, DC shunt generator, 1 KW, AC Sliping Motor 1 HP., Model: TPAC â?? 401 Suitable for to study speed control of three phase induction motor using Three phase AC Voltage Controller.
Warranty: 12 months Certification: CE Place of Origin: Guangdong,China Brand Name: rawsun Model Number: RMC60 Application: 60KW peak power for the motor cooling type: water cooled high volt input range: 250-420VDC low volt input range: 9-30VDC peak efficiency: 99% Dimensions: 380*280*98mm IP grade: 67 Maximum working alitude: 3500m Max output current peak: 320Arms
GM18 final drives suitable for PC120-6, PC130-7 excavator. Also suitable for Doosan, Daewoo, sumitomo and so on more information pls contact with amy ,
1HP motor 1745 RPM TEFC 575 volt 3 phase reversible Specifications: Manufacturer: US Motors Manufacturer p/n: P63CRB-2889/B95 7 Condition: NEW IN BOX Applications: Industrial, manufacturing Dimensions: Height: 9" Width: 10" Depth: 13" Weight: 27 lbs Voltage: 575 Shaft OD: 5/8" Shaft Length: 2".
Top Quality Compressor Scrap Used Electric Motor scrap AC Compressor Scrap Drained Copper Compressor â?? Fridges/AC (RAINS per ISRI Specifications). Our copper content on 99.97 % Monthly Supply Capacity: 500 - 1500 metric tons, Type: Fridges, AC. Packaging Detail: Wood Pallets, 20(40) FCL/ According to ISRI Specification in Containers Quantity: Between 200~500MT per month Minimum Order acceptable 1x20FCL (25MT or 26MT/20FCL, 3000 or 3450 Pieces/20FCL Detailed Specifications : Compressor Brands : Necchi, Danfoss, Aspera, Ireland, Embraco Compressor Weight : 2kg, 4kg, 6kg, 8kg, 10kg, and 12kg More Details : 220-240 v 50 or 60 hz. Cooling capacity: 90-190 w displ Size : 5.99 -12.53 cm3 Purity: 99.98% copper inside with connection box Send your message to this supplier Main Specification:
Clean electric motor scrap available at fair rates to your port.
Induction Motor (SP-B)
Induction Motor (single Phase)
ON SEMI, FCM8202QY, the year 2021 qty 2500 pcs
Mixed Electric Motors Scrap Electric Motors and Alternators Scraps in Bulk Top Quality Mixed Electric Motor Scrap at Affordable Prices Buy electric motor scraps scrap electric motors Electric motor scrap Mixed Electric Motors Scrap Electric Motors and Alternators Scraps in Bulk Top Quality Mixed Electric Motor Scrap at cheap price electric moto scrap for sale electric motor scrap Dear buyers here are a list of our product which we supply Electric Motor Scrap,AC fridge compressor scrap,Alternator Scrap,Starters scrap with 100% copper wind.We collect locally from our small We are trading in the finest quality Metal Scrap/ Aluminum Scrap, which are recycled for producing pure copper products and equipment. Our Company is a prestigious company with a good reputation to suite all customer`s across the world and we look forward to providing good quality products and we will offer at very good price as our prices are 100% NEGOTIABLE. Operating conditions: Ambient temperature: -15?C
Induction Motor B3-Foot Mounted
Used Car Pen Motor Brand: All Korean car brands MOQ: Consultable Price: Consultable
Model Number Electric Motor Scrap Grade HMS Material Electric Motor Type Electronic Shape Lump Product name Used Electric Motor Scrap Material All Kinds of Electric Motor Al Content (%) 99% Copper Per Motor 2 - 3 Kg per piece Size 5kg to 25kg Alloy Or Not Non-alloy Application Corrosion Resistance Features High Tensile Strength Quality Clean Condition Working/ Non Working
Alternator Motor Scrap
Description: Recycle IC Tray Container (mixed) Available Qty: 200k Pcs/month Delivery Time: Partial Shipments In One Months. Payment Term: LC At Sight
Specification for Scrap Electrical Motor General Description: The scrap electrical motor shall be an industrial or commercial-grade electric motor that is no longer operational or intended for reuse in its current state. Physical Characteristics: Dimensions: Provide approximate dimensions (length, width, height) of the motor. Weight: Specify the weight range of the motor. Appearance: Describe the external condition (e.g., rust, wear, intact casing). Electrical Specifications: Voltage Rating: Indicate the nominal voltage rating of the motor. Power Rating: Specify the power output in horsepower (HP) or kilowatts (kW). Phase: State whether the motor is single-phase or three-phase. Frequency: Specify the operating frequency (e.g., 50 Hz or 60 Hz). Mechanical Specifications: Type: Describe the type of motor (e.g., induction motor, synchronous motor). Enclosure: Specify the type of motor enclosure (e.g., open, totally enclosed). Shaft: Detail the condition and specifications of the motor shaft (e.g., diameter, keyway). Operational Condition: Functionality: Clarify whether the motor is inoperable or partially functional. Defects: Note any known defects or issues affecting operation. Environmental Considerations: Hazardous Materials: Identify any hazardous materials present (e.g., oil, heavy metals) and their safe handling requirements. Disposal Requirements: Specify disposal guidelines in accordance with local regulations. Packaging and Transportation: Packaging: Describe how the motor will be packaged for transport (e.g., palletized, boxed). Transportation: Provide guidelines for safe handling during transportation (e.g., lifting points, weight limits). Documentation: Certificates and Documentation: Include any certificates or documentation related to the motor's original specifications or hazardous material content. Additional Information: Purpose: State the intended use of the scrap motor (e.g., recycling, parts salvage). Availability: Specify quantity and availability of the scrap motors. Compliance: Regulatory Compliance: Ensure compliance with relevant safety and environmental regulations. Notes: This specification is intended to provide a comprehensive overview of the scrap electrical motor's characteristics and condition. It should be used to accurately assess the motor's suitability for recycling or other intended purposes. Any additional specific requirements should be clearly outlined based on the intended use and local regulatory requirements.
Preferred Density Range : 18 to 25kg/ m3 Clean & Dry Unused Off-Cuts : 100% Color : Mixed Foam Skins : None Rebonded Foam : None Bare Skins : None Ester-type Foam : None Hydrophilic Foam : None Laminated Fabric/Foam : None Laminated Vinyl/PVC/Foam : None Reticulated Foam - None Visco-elastic Foam : None Foreign Matter/Contamination : Absolutely None Factory Sweepings : Absolutely None Recycled, Old or Used Foam : Absolutely None Packaging : In compressed by bales Weight: 250 to 300kgs per bale Loading Quantity : 40 High Cube containers can loaded no less than 18,000kgs
