Cellulose Fiber Suppliers and Manufacturers

We deals in the following Chemicals :- Magnetite, Cellulose Fibers, Cellophane Flakes, Walnut Shells Calcium Carbonate Powder Alumina Silica ( Cenosphere ) Powder Fly Ash Powder Ilmenite (Synthetic Rutile) Hematite / Iron Oxide Powder, Iron Oxide ( Ferric Oxide ) Barite Powder, Barite Ore Dolomite Powder Mica Powder, Mica Flakes, Mica Blocks, Mica Sheets Quartz / Silica Powder, Quartz / Silica Lumps, Quartz / Silica Granules, Quartz / Silica Grits Bentonite Powder, Bentonite Lumps, Bentonite Granules, Bentonite Clay

Hydroxyethyl Cellulose(HEC) Hydroxyethyl cellulose is a gelling and thickening agent derived from cellulose. It is widely used in cosmetics, cleaning solutions, and other household products. Hydroxyethyl cellulose is also used extensively in the oil & gas industry as a drilling mud additive under the name HEC as well in industrial applications, paint & coatings, ceramics, adhesives, emulsion polymerization, inks, construction, welding rods, pencils and joint fillers.

Kazakhstan based cotton cellulose producer. Loose mass of white color, not containing extraneous inclusions in the form of plaster, sand, rubber pieces, metallic inclusions and other impurities of non-cellulosic nature. Alpha cellulose: 99.4% Humidity: 9.8% Ash content: 0.25% Sulphuric acid insoluble: 0.30-0.50 % Brightness: 88% Fraction of dust: 1.1% Dynamic viscosity: 513 mpa.S Annual production of 5 000 metric tons. Reliable supplier with consistent quality and competitive pricing! Samples, certificates and other documentation available upon request.

Filtration performance is further enhanced by the use of a state of the art multi layer pleating process. The multi layers provide an integral pre-filter and protection to the glass media. Resulting in maximum dirt holding and increased durability to extend the filters life. The filters are manufactured to the most stringent production standards using the latest automated manufacturing equipment and the highest quality of materials. The cartridge is assembled with thermal weld technology making a one pieces cartridge construction for maximum integrity and strength. Extensive filter production knowledge and the most modern manufacturing facilities results in a top of the range, but still economic pleated micro fibre glass filter cartridge.

Introduction FM 5000 cellulose fiber feeder is in order to cooperate with the production of asphalt mixing station, according to the engineering design flow, add quantitative granular or powdered asphalt modifier to the asphalt mixture timely and accurately, make asphalt modifier disperse in the asphalt mixture evenly, thus enhance the stability of the asphalt mixture, improve the paving asphalt roadbed quality, prolong the pavement service life. System Composition: FM 5000 cellulose fiber feeder is composed of PLC control system, storage bin, screw conveying system, electronic weighing system, dosing system, fault alarm system and other control systems. All parts of the equipment are installed on a single frame, which is convenient for lifting, transportation and field installation. Working Principle: According to the characteristics of granular or powdered asphalt modifier, the machine adopts electronic weighing method, add quantitative granular or powdered asphalt modifier to the asphalt mixture timely and accurately according to the engineering design flow. During production, the particles or powder asphalt modifier is poured into the hopper, the whole feeding process is carried out under the control of PLC program automatically after the hopper door is closed . The feeding screw conveying system transfers the asphalt modifier in the hopper, such as anti-rutting agent and lignin fiber particles and so on, to the weighing hopper for weighing, and then waits for feeding signal after weighing accurately. After receiving the feeding signal from the PLC control system, the discharging screw conveyor sends the asphalt modifier with accurate weight to the asphalt mixing cylinder through a two-stage blower immediately, to realize the mixing of asphalt modifier and asphalt aggregate, and finally dispersing it evenly into the asphalt mixture. There is always a certain amount of material in the warehouse, which is added to the metering system timely. So it goes around automatically. Parameter Product Name Cellulose fiber feeder Model FM5000 Measurement method automatic electronic weighing measurement Control Mode PLC control system Weight 1150kg Size 2280mm*1150mm*2100mm Power 14.5KW Rated voltage 380VAC

Introduction: The main function of FX5000 fiber feeder is to cooperate with the production of asphalt mixing station, to realize the timing and quantitative release of all kinds of road fibers such as flocculent lignin fiber and polyester fiber according to the amount of engineering design, and make the road fibers dispersed in the asphalt mixture aggregate evenly, so as to improve the stability of the asphalt mixture aggregate. System composition of FX5000 fiber feeder: FX5000 fiber feeder is composed of storage bin, dispersing system, conveying system, metering system, feeding system, simple fault alarm system and so on. Working principle of FX5000 fiber feeder: According to the characteristics of the road fiber, the machine adopts the method of time and volume measurement. During production, the fiber materials to be put into the storage bin, the conveying system will transport the broken fiber materials to the metering system, the machine will blow the measured fiber to the mixing cylinder timely according to the set dosage and delivery time, to ensure the accuracy of the amount of added road fiber and dispersion in the mixed aggregate. The machine has a high degree of automation, workers need to ensure only that there is material in the warehouse during production, metering and delivery work can be completed automatically.

Cellulose fiber making machine also named waste paper recycling equipment . It used for making waste paper into cellulose fiber . The waste paper recycling equipment is researched and developed based on both domestic and foreign advanced technology. It adopts an advanced physical recycling technology to reduce paper-making burden, which is obviously efficient in the recycling and utilization of waste papers, fibers, leathers and clothes leftovers as well as more efficient in breaking and crushing wheat and rice straw, peanut shell, straw rope and grass mat. Meanwhile, our company also produces straw and fiber crusher to make waste paper recycling easy. Characteristics of waste paper recycling equipment 1. The equipment uses dry type breaking and crushing. It integrates dedicated crusher and breaker to improve energy utilization efficiency and realizes high recovery. 2. It has good comprehensive properties for all kinds of waste papers and fibers, and it is compatible for wheat and rice straws, peanuts, straw rope and pat. 3. It is characterized by low energy consumption, little noise, high automation, fewer labor, high efficiency and small floor space, which is the ideal production line for waste paper recycling. 4. It also can be flexibly arranged according to different customers’ demand. And different production lines can be customized. 5. It also uses our self-owned triple dust collecting unit (triple dust collector), including three stages, cyclone, cloth-bag and air cleaner dust collectors, which can effectively solve the dust pollution problems. All their indexes have met the national standard.

Cellulose fiber (Coarse, Medium & Fine) used as Lost Circulation Material in Oil & gas drilling industry and very important item among Drilling / Mud chemicals.

Filtration performance is further enhanced by the use of a state of the art multi layer pleating process. The multi layers provide an integral pre-filter and protection to the cellulose fiber media. Resulting in maximum dirt holding and increased durability to extend the filters life. The filters are manufactured to the most stringent production standards using the latest automated manufacturing equipment and the highest quality of materials. The cartridge is assembled with thermal weld technology making a one pieces cartridge construction for maximum integrity and strength. Extensive filter production knowledge and the most modern manufacturing facilities results in a top of the range, but still economic pleated cellulose fiber filter cartridge.

Raw Materials: Cement, Quartz Sand, Fiber Size: 1220*2440mm / 1200*2400mm Thickness: 4.5mm~25mm Density: 1350±10~1550±10 g/cm3 Fire Resistance:Incombustibility A1 Class Color: Grey/White/Black/Yellow/Light Green/Red Certificate: ISO9001,CE,COC,SONCAP Application: Partition System, Suspended System