Product Name: Guarana Powder Product Code: WH3001 Description: Product obtained by hydroalcoholic extraction of the Paullinia cupana (sapindaceae) seeds, and then spray dried. due to its energetic properties make it suitable for use in various applications in the food industry. Common Uses and Orientative Dosage: Food supplement 300.00 g/100kg SENSORY SPECIFICATION Aspect Fine powder Color Brown Odor Characteristic Taste Characteristic PHYSICAL & CHEMICAL SPECIFICATION ID Test Positive Caffeine Min. 22.00 g/100g Specific Gravity at 25°C 0.30 g/mL - 0.60 g/mL Moisture Max. 5.00 g/100g pH 4.20 - 5.20 CONTAMINANTS SPECIFICATION Heavy Metals Max. 10 ppm MICROBIOLOGICAL SPECIFICATION Aerobic Plate Count Max. 1000 CFU/g Escherichia Coli Negative/g Yeasts and Molds Max. 100 CFU/g Salmonella Negative/25g Staphylococcus Aureus Negative/g Total Coliform Max. 10 MPN/g Packaging: Cardboard box with plastic bag. Shelf Life: 24 months from the date of manufacture if following storage conditions. Storage conditions: Store in sealed original packaging, in a dry and ventilated place, protected from sunlight. Hygroscopic product.
Product Name: Acerola Powder Product Code: WH2001 Description: Product obtained from selected fruit (Malpighia emarginata )which juice is dehydrated by atomization (spray dryer). Common Uses and Orientative Dosage: Powder/solid mix for drinks 230.00 g/100kg SENSORY SPECIFICATION Aspect Fine powder Color Ivory Odor Characteristic Taste Characteristic PHYSICAL & CHEMICAL SPECIFICATION Loss on drying at 105 °C Max. 5.00 g/100g Ascorbic Acid Min. 17% Specific Gravity at 25°C 0.40 g/mL - 0.80 g/mL Total Ash Max. 5.00 g/100g Moisture Max. 6.00 g/100g pH 2,80 - 4,20 CONTAMINANTS SPECIFICATION Heavy Metals Max. 10 ppm MICROBIOLOGICAL SPECIFICATION Aerobic Plate Count Max. 1000 CFU/g Escherichia Coli Negative Yeasts and Molds Max. 100 CFU/g Salmonella Negative Total Coliform Max. 10 MPN/g Packaging: Cardboard box with plastic bag. Shelf Life: 24 months from the date of manufacture if following storage conditions. Storage conditions: Store in sealed original packaging, in a dry and ventilated place, protected from sunlight. Hygroscopic product.
SENSORY ANALYSIS SPECIFICATION METHOD Color Clear Yellow To Yellow Amber Internal Method Aspect Liquid Internal Method PHYSICAL & CHEMICAL ANALYSIS SPECIFICATION METHOD Spilanthol Content (GLC) Min. 30% Internal Method Refractive index at 20 �°C 1,454 - 1,494 Internal Method Specific Gravity at 25�°C 0,920 - 1,000 Internal Method HEAVY METALS SPECIFICATION METHOD Arsenic Max. 3 ppm Internal Method Mercury Max. 1 ppm Internal Method Cadmium Max. 1 ppm Internal Method Lead Max. 10 ppm Internal Method MICROBIOLOGICAL ANALYSIS SPECIFICATION METHOD Escherichia coli Negative/g Internal Method Salmonella spp. Negative/25g Internal Method Total Plate Count Max. 1.000.000 UFC/g Internal Method Staphylococcus aureus Negative/g Internal Method Shelf Life: 18 months if stored according to instructions. Storage conditions: Store in a tightly closed container with minimum headspace in a cool, dark and dry place.
Aluminum Hydroxide is a white powder which can be used as flame retardant and filler.While it is used for resin Solid Surface,It has characteristic of white crystalline powder, non-toxic, tasteless, good mobility, low oil absorption, low iron content, particle morphology, particle size distribution, low impurity content, good stability, high whiteness, uniform particle size and good dispersibility. While it is used for composite materials,it has characteristic of micro powder,high white powder without secondary pollution,smoke elimination, filling, antistatic.The initial decomposition temperature of aluminum hydroxide is about 205 �ºC. Aluminum hydroxide flame retardant can release a large amount of water vapor when heated. A large amount of water vapor can store heat and dilute the concentration of polymer combustible gas. It can also form a non combustible barrier between the combustion source and the matrix material to achieve the purpose of flame retardant. At the same time, it is also a smoke suppressant, because the gas it releases is water vapor, which has no corrosion to metals.
Aluminum Hydroxide is a white powder which can be used as flame retardant and filler. While it is used for resin Solid Surface,It has characteristic of white crystalline powder, non-toxic, tasteless, good mobility, low oil absorption, low iron content, particle morphology, particle size distribution, low impurity content, good stability, high whiteness, uniform particle size and good dispersibility. While it is used for composite materials,it has characteristic of micro powder,high white powder without secondary pollution,smoke elimination, filling, antistatic.The initial decomposition temperature of aluminum hydroxide is about 205 �ºC. Aluminum hydroxide flame retardant can release a large amount of water vapor when heated. A large amount of water vapor can store heat and dilute the concentration of polymer combustible gas. It can also form a non combustible barrier between the combustion source and the matrix material to achieve the purpose of flame retardant. At the same time, it is also a smoke suppressant, because the gas it releases is water vapor, which has no corrosion to metals.
Aluminum Hydroxide is a white powder which can be used as flame retardant and filler. While it is used for resin Solid Surface,It has characteristic of white crystalline powder, non-toxic, tasteless, good mobility, low oil absorption, low iron content, particle morphology, particle size distribution, low impurity content, good stability, high whiteness, uniform particle size and good dispersibility. While it is used for composite materials,it has characteristic of micro powder,high white powder without secondary pollution,smoke elimination, filling, antistatic.The initial decomposition temperature of aluminum hydroxide is about 205 �ºC. Aluminum hydroxide flame retardant can release a large amount of water vapor when heated. A large amount of water vapor can store heat and dilute the concentration of polymer combustible gas. It can also form a non combustible barrier between the combustion source and the matrix material to achieve the purpose of flame retardant. At the same time, it is also a smoke suppressant, because the gas it releases is water vapor, which has no corrosion to metals.
Aluminum Hydroxide is a white powder which can be used as flame retardant and filler. While it is used for resin Solid Surface,It has characteristic of white crystalline powder, non-toxic, tasteless, good mobility, low oil absorption, low iron content, particle morphology, particle size distribution, low impurity content, good stability, high whiteness, uniform particle size and good dispersibility. While it is used for composite materials,it has characteristic of micro powder,high white powder without secondary pollution,smoke elimination, filling, antistatic.The initial decomposition temperature of aluminum hydroxide is about 205 �ºC. Aluminum hydroxide flame retardant can release a large amount of water vapor when heated. A large amount of water vapor can store heat and dilute the concentration of polymer combustible gas. It can also form a non combustible barrier between the combustion source and the matrix material to achieve the purpose of flame retardant. At the same time, it is also a smoke suppressant, because the gas it releases is water vapor, which has no corrosion to metals.
1.The machine adopts imported motor and reducer, and the production speed is more than 20% higher than that of domestic counterparts and similar products. Bearing, gear and other important parts imported from Taiwan, the equipment is durable and reliable. 2.The computer interface can adjust the speed and process while production. Production efficiency and output are displayed on the computer interface, the equipment can automatically stop after reaching the specified output. 3.High precision, can be used for wire forming products within the range of 3.0-10.0mm wire diameter, with the error reduced to 0.1mm.Production can be achieved at the slowest bending angle and angle without any change, production stability is better. 4.The wire that the machine can bend includes: iron wire, stainless steel wire, non-ferrous metal wire and special materials (including round wire, square wire, flat wire, etc.), can be bent into a variety of plane irregular shape and a variety of plane buckle, hook, etc.
ROCK REAMER There is no fixed tooth shape and bearing for the rock reamer, so it is necessary to select appropriate tooth shape and bearing structure according to different stratum structure. It adopts the palm back tilt, cold inlaid anti - ruin gold design, with the roller anti-peeling structure, mainly to prevent the roller falling off after the roller bearing is damaged, resulting in the accident in the hole. The roller reamer is suitable for horizontal directional drilling construction, with high design strength, good wear resistance, long service life and good safety performance. The reaming size is 220~1600mm. Types Of Rock Reamer Roller Cone Reamer It means that the teeth using the roller are milled teeth, that is, the teeth milled out on the matrix of the roller, whose wear resistance is relatively poor. In order to improve its wear resistance, it is often coated with a hard alloy layer. What Are Rock Reamer Made Of? 01 The Structure Of The Rock Reamer Is Shown In The Figure The rock reamer mostly uses the single tooth palm of the cone bit and the cone as one cutting edge, 02 With The Number Of Cutting Edges At Least 3 The cone reamer is composed of a rear centering plate, a rear baffle. 03 A Mandrel A front baffle, a front centering ring, a front centering plate, a cone, and a tooth palm. 04 The Reamer Uses Welding Process To Connect And Fix The Components. In the process of hole reaming, the screw drill provides torque and the drill provides tension. As a drill bit supplier, we will do our best to meet all the needs of customers. If you want to know more types of oem pdc bit, please visit our website.
The 7.2KW AC Charger EV Tethered Wallbox is the ideal solution for hassle-free, dependable, and budget-friendly home charging. It offers a range of innovative safety features and intelligent charging options, ensuring a premium charging experience that can be adjusted with evolving technology. The compact, robust device is equipped with WiFi and can be tailored to your preferences, including color choices and colorful charging cables. Additionally, it is available at an affordable price point. Highlight Of 7.2KW AC Charger EV Tethered Wallbox Compact design. Easy to use. Durable and beautiful. Safe and reliable. How to Install 7.2KW AC Charger EV Tethered Wallbox Floor-Mounted Installation: For setting up the EV Cubicharge portable EV charger with a 7.2 kW AC charging capacity: Mounting Pole Material: The floor-mounted installation of this versatile EV charger can be accomplished using a durable metal mounting pole. Key Features: The EV Cubicharge portable EV charger, operating at 7.2 kW AC, is designed with a small footprint for convenience, ease of use, and aesthetic appeal. Its durable construction ensures longevity and reliability. Advantages: This floor-mounted configuration doesn't require leaning against a wall, making it suitable for outdoor parking spaces such as driveways or community parking areas. Wall-Mounted Installation: When opting for a wall-mounted setup for the 7.2 kw ac charger: Installation Requirement: Securely mount the charger against a wall, indoors or outdoors, for optimal use. Key Features: The wall-mounted EV Cubicharge portable EV charger offers a compact design, combining ease of use with durability and aesthetic appeal. It operates at 7.2 kwh charger, providing efficient charging performance. Advantages: By fixing it to a wall, this charger saves space and ensures a stable and reliable charging solution, suitable for various locations including home garages, carports, and commercial settings. For more information about types of circuit protection devices, please feel free to contact us!
Product Name: Acai Powder Product Code: WH1001 Description: The acai berry is the fruit of the acai palm (Euterpe oleracea), native to the amazon, and has been consumed for centuries in popular recipes in the north of Brazil. This super fruit of purple color and remarkable flavor is rich in anthocyanins(a natural constituent with antioxidant activity), amino acids, essential fatty acids, fibers, proteins, and minerals (mainly calcium and potassium). This dehydrated ingredient is obtained from selected acai juice, and dried by atomization(Spray Dryer). Common Uses and Orientative Dosage: Food supplement 500.00 g/100kg SENSORY SPECIFICATION Aspect Fine powder Color Bordeaux Odor Characteristic Taste Characteristic PHYSICAL & CHEMICAL SPECIFICATION ID Test Positive Moisture Max. 5.00 g/100g Specific Gravity at 25°C 0.40 g/mL - 0.80 g/mL Particle Size 0.42mm(40 mesh) Max. 5.00 g/100g Total Polyphenols Min. 0.30 g/100g CONTAMINANTS SPECIFICATION Heavy Metals Max. 10 ppm MICROBIOLOGICAL SPECIFICATION Aerobic Plate Count Negative/g Escherichia Coli Negative/25g Yeasts and Molds Max. 1.000.000 UFC/g Salmonella Negative/g Total Coliform Max. 10 MPN/g Packaging: Cardboard box with plastic bag. Shelf Life: 24 months from the date of manufacture if following storage conditions. Storage conditions: Store in sealed original packaging, in a dry and ventilated place, protected from sunlight. Hygroscopic product.
How to Choose the Right Heavy Duty Linear Actuator for Your Application Load Capacity: Consider the maximum load your application requires the heavy duty linear actuator 12v to handle. Ensure that the actuator's load capacity is sufficient to support your specific load requirements. It's crucial to leave some margin for safety and account for dynamic loads. Stroke Length: Determine the necessary linear travel distance for your application. Choose an actuator with a stroke length that can accommodate this distance while leaving room for any necessary adjustments or variations in movement. Environmental Considerations: Assess the environmental conditions in your application area. Factors such as temperature, humidity, dust, and exposure to chemicals can impact the actuator's performance and lifespan. Choose an actuator with appropriate sealing, protective coatings, or specialized features to withstand these environmental factors. Mounting and Integration: Consider how the actuator will be mounted and integrated into your system. Look for compatibility with your existing mounting brackets, end fittings, and control interfaces. Consider factors such as installation space requirements, power source compatibility, and the need for additional accessories or customization options. FAQs of Heavy Duty Linear Actuator What is a Heavy Duty Linear Actuator and what are its primary uses? A heavy duty electric actuator is a mechanical device that converts energy into controlled, linear motion. Itâ??s primarily used in industrial applications where high force and durability are required, such as construction machinery, industrial automation, and heavy-duty robotics. How does a Heavy Duty Linear Actuator differ from a standard Linear Actuator? Heavy Duty Linear Actuators are designed to handle higher loads and tougher conditions compared to standard actuators. They are built with stronger materials and often have additional features like overload protection and higher IP ratings for resistance against dust and water. What factors should I consider when choosing a Heavy Duty Linear Actuator? Key factors to consider include the load capacity, speed, stroke length, voltage, and the environmental conditions the actuator will be exposed to. Its also important to consider the actuators duty cycle, which is the amount of time it can operate without overheating. Can Heavy Duty Linear Actuators be customised to fit specific applications? Yes, many manufacturers offer customisation options for their Heavy Duty Linear Actuators. This can include custom stroke lengths, mounting options, and even specific control systems to suit your applications needs.
Lithium ore, tantalum concentrate.
Art paper
Should be ESI standard and moisture contents should be 10%. The outthrows should upto 5% only Bales.
Beef, poultry, sugar, sulphur.
Bauxite, cement, clinker, rice, sugar, soya beans, crude oil, iron ore.Investment consultant, real estate facilitator
