There is a layer of oxidized film on the surface of titanium plate GR7, which is equivalent to a good long-term wear-resistant hair separating agent. The use of titanium plate saves the separating agent, makes the plate peeling easily, and eliminates the pre-treatment process. The plate is half lighter than the copper board. The service life of titanium plate is more than 3 times that of copper plate, which can reach 10 to 20 years according to operating conditions. The titanium plate GR7 can increase production capacity and reduce the production cost of electrolytic copper, so that it has better economic benefits. Grade 5 titanium alloy also known as Ti6Al4V, Ti-6Al-4V or Ti 6-4titanium alloy, is the most commonly used alloy. It has excellent specific strength, excellent corrosion resistance and fracture toughness, as well as good weldability and ability to withstand extreme temperatures, and can be strengthened by heat treatment. The alloy was originally developed for the aerospace market and is widely used in aerospace structural components. Because of its very good biocompatibility, it is also widely recognized in the medical industry. Typical applications include aero-engine components, fuselage components, marine equipment, offshore oil and gas equipment, power generation, chemical industry, automotive moving parts, medical equipment, surgical implants, sports equipment. Titanium Sheet Grade 5 has excellent corrosion resistance, small density, high specific strength and good toughness and weldability. It has been successfully applied in aerospace, petrochemical, shipbuilding, automotive, pharmaceutical and other sectors. We also have ti6al4v eli and ti6al4v. https://www.yunchtitanium.com/titanium-sheet-1
Stainless steel plates 3''x8'x8' sheet weight 9000 lbs each Quanty 2 sheets weight 18,000 lbs Shipp as whole sheet 3"x8'x8' each
139.53 US Tons of Brass Coated Tire Cord - on 99 pallets -new on spools - 200 full spools (48# each) Chemical Name / Weight % Iron (Fe) / balance Carbon (C) / 0.67~0.96 Silicon (Si) / 0.20 ~0.35 Manganese (Mn) / 0.40~0.60 Phosphorus (P) / 0.025 Sulfur (S) / 0.025 Copper (Cu) / 0.20-0.40 Zinc (Zn) / 0.10-0.40
Brass scrap, silver and silver plated jewellery.
Hms 1-2, stainless steel scrap, aluminum scrap, brass scrap, copper scrap, ship scrap.
Aluminum scrap, copper scrap, stainless steel scrap, zinc scrap, brass scrap.
3003 aluminum plate is an AL-Mn alloy, which is a widely used anti-rust aluminum. It has low strength (slightly higher than industrial pure aluminum), cannot be strengthened by heat treatment, has good corrosion resistance, good weldability, and poor machinability. Application areas: power battery shells, automobile heat shields, air conditioning ventilation ducts, etc. 3004 aluminum plate also belongs to a series of aluminum-manganese alloys. Its strength is higher than that of 3003 aluminum plate. It has excellent formability, good corrosion resistance, good weldability, poor machinability, and cannot be strengthened by heat treatment. Application areas: lamp base materials, radiators, food storage tanks, etc. Status: O, H32, H34, H36, H38, H111, H112 Surface treatment: smooth aluminum, mirror, patterned aluminum plate Packaging and transportation: simple packaging, refined packaging, logistics packaging, foreign trade shipping packaging (fumigated wooden pallet optional) Please contact us for specific parameters and we will give you a detailed quotation.
The production company has been on the market since 2012. The main direction of the company: the production of peas, green buckwheat, lentils, green plate of 5 plus caliber. All products pass petcus and color sorter. Our products are gluten-free. Green buckwheat is produced exclusively from naturally dried raw materials, our technologists carefully select raw materials without gluten grains. We can also offer gluten-free broken green buckwheat. Split peas: productivity of 1000 tons/month. Lentils: productivity of 1000 tons/month. Packing is performed at the request of the client. We can also offer crops such as: buckwheat, whole raw peas, rapeseed, flax, barley, oats, wheat, soy. The company " is in the register of exporters to China. We offer to work transparently and honestly on pre-agreed terms, the registration number of our company as an exporter in the The Federal Service for Veterinary and Phytosanitary Supervisi You can find out all the details by contacting us, we will calculate the delivery to your port. Our products are grown in pristine places of the Altai Territory, which is famous for its cleanest ecology. Therefore, our products are environmentally friendly, do not contain GMOs and have the highest percentage of germination of 99.99%. Our organization has established itself as a responsible company that is attentive to the wishes of its customers. We constantly monitor prices and product range, which allows our partners to save not only their own money.
1 Series Aluminium Sheet Introduction 1000 (brand) series aluminum alloy represents 1050, 1060, 1100. In all series, 1000 series belongs to the most aluminum series, purity can reach more than 99.00%. Because it does not contain other technical elements, the production process is relatively single, and its price is relatively cheap. It is currently one of the most commonly used series in the conventional industry. Most of the current circulation on the market is 1050 and 1060 series, 1000 series aluminum plate determine the minimum aluminum content of this series according to the last two Arabic numerals. Its characteristics are: good electrical conductivity, good corrosion resistance, good welding performance, low strength. In terms of use, it is relatively soft, mainly used to do decorative parts or interior parts, mostly used in the chemical industry and special purposes. Aluminum plate refers to the rectangular plate made of aluminum ingot rolling. It can be used for lighting decorations, solar reflective panels, architectural appearance, interior decoration, elevator, sign, automobile interior decoration, household appliances, aerospace and military aspects. Our company produces aluminum plates between 0.5 to 500 mm thick, 500 to 2200 mm wide and 500 to 9000 mm long.
Copper scrap, brass scrap, aluminum ingot.
5052 aluminum plate is an AL-Mg alloy aluminum plate, which combines the advantages of 3 series anti-rust aluminum and the excellent formability of 5 series. It has moderate strength, especially fatigue resistance: high plasticity and corrosion resistance, cannot be strengthened by heat treatment, and is durable. Good corrosion, good weldability, poor machinability, can be polished. Application areas: transportation vehicles, ship sheet metal parts, aircraft fuel tanks, etc. 5083 aluminum plate belongs to the Al-Mg series alloy and is widely used. Especially in the construction industry, this alloy is inseparable and it is a promising alloy. It has good corrosion resistance, excellent weldability, good cold workability, and medium strength. Application fields: ships, automobiles, aircraft welding parts, subway and light rail, etc. 5754 aluminum coil is a typical aluminum plate among Al-Mg alloys. It has the characteristics of medium strength, good corrosion resistance, weldability and easy processing and forming. Application areas: automobile manufacturing industry, doors, bodies, seals, etc. 5182 aluminum plate has good corrosion resistance, excellent weldability, good cold workability, and medium strength. Application areas: automobile body panels, control panels, reinforcements, automobile fuel tanks, electrical appliance casings, etc. Status: O, H32, H34, H36, H38, H111, H112 Surface treatment: smooth aluminum, mirror, patterned aluminum plate Packaging and transportation: simple packaging, refined packaging, logistics packaging, foreign trade shipping packaging (fumigated wooden pallet optional) Please contact us for specific parameters and we will give you a detailed quotation.
1401 Basmati Rice is characterized by its long, slender grains, which contribute to its premium quality and elegant appearance on the plate. With an impressive grain length, 1401 Basmati Rice stands out for its uniformity and consistency, ensuring a visually appealing presentation. Widely preferred by chefs and home cooks. Specifications: Long and slender grains Fragrant aroma Delicate texture when cooked Uniform grain length
We offer huge selection of silver & brass plated by 18k yellow gold. Usps express mail
Key Specifications/ Special Features: Best Quality Copper Wire Scrap Type:Copper Wire Material:Copper Shape:Linear Color:Red Purity:99.9% Min Application:Air Condition or Refrigerator, Water Tube, Water Heater, Oil Cooler Pipe We could supply the copper scrap with high quality and competitive price. 1) Our copper scrap includes wires, tubes, and plates, etc. 2)The size is chips or other. 3) Copper content could meet customers need. Application: Electrical, light industry, machinery, national defense industry . Copper Scrap is industry a important sources of the raw materials, all kinds of can be recycled Recycling waste production with copper Copper WIRE SCRAP, (Millberry) 99.99% at a purity of 99.98% min. 99.99% Max. COPPER: 99.9% CARBON: 0.03% COBLET:
Copper scrap no 1 & 2, yellow and red brass scrap, SS steel scrap, 304 - 316 - 316l, HMS 1 & 2.
Material : quality brass wire Wire diameter: 0.30mm, 0.25mm, 0.20mm Weight/spool: 3 kg, 5 kg, 7 kg, 15 kg, 20kg Tensile strength: 1000 N/mm2, 900 N/mm2, 500 N/mm2, 450 N/mm2, N/mm2 Packing: shrink wrapped carton pallet to resist moisture, quake, and corrosion. Application: for welding brass alloy material standard and purity of copper wire scrap 99.99% pure Name Chemical Composition (%): Copper Scrap Cu: â?¥ Bi:â?¤ Sb:â?¤ As:â?¤ Fe:â?¤ Ni:â?¤ Pb:â?¤ Sn:â?¤ S:â?¤ O:â?¤ Zn:â?¤ P:â?¤ 99.95 0.002 0.002 0.002 o.oo5 0.002 0.005 0.002 0.005 0.002 0.005 0.001 Usage: Electrical, light industry, machinery, building industry, national defense industry Copper Scrap is industry a important sources of the raw materials All kinds of can be recycled Recycling waste production with copper specification: Copper WIRE SCRAP, (Millberry) 99.78% at a purity of 99.78% min. 99.78%Max. COPPER: 99, 9% CARBON: 0.03% COBLET: <0, 001 IRON: 0, 005% PHOSPHORUS: <0, 01% SULPHUR: <0, 01% ZINC: 0, 003% Brass wire with diameter 0.1. 0.15, 0.20, 0.25, 0.30mm COMMODITY: Copper Wire Scrap, (Millberry) 99.78% SPECIFICATIONS: Copper Wire Scrap, (Millberry) 99.78% Specification: Copper % 99.9Min 99.95 Carbon % 0.03Max 0.03 Cobalt % 0.001Max 0.0005 Iron % 0.005Max 0.003 Phosphorus % 0.01Max 0.008 Sulphur % 0.03Max 0.01 Zinc % 0.003Max 0.003
1-Ply White Beverage / Cocktail Napkin 4000/Case You cannot go wrong with this universal color, as it complements any event's decor. This versatile napkin also serves an economical alternative to small plates, as it's great for snacks, desserts, and hors d'oeuvres as your catered event or private party. This napkin's petite size is perfect for cocktails and other functions, where using larger dinner napkins is simply wasteful! Add these dependable beverage napkins to your catering business's portable bar, restaurant, cafe, and other business for a great valuable without compromising quality! Additional information Weight 9.53 lbs Quantity 4000/Case Type Beverage Napkins Style 1/4 Fold Folded Length 4 1/2 Inches Unfolded Length 9 Inches Folded Width 4 1/2 Inches Unfolded Width 9 Inches Color White Material Paper Ply 2 Ply
Classic Pink 3-Ply Beverage Napkin 500/Case This 3-ply beverage napkin accentuates table settings or catering trays while also helping to pull together a birthday or holiday party. Social events with snacks and finger foods will find these beverage napkins can serve as the perfect plate substitute. Additionally, this napkin is an excellent, cost-effective alternative to buying expensive coasters or saucers to place under glasses. Additional information Weight 4.33 lbs Type Beverage Napkins Material Paper Recycled Materials style 1/4 Fold Quantity 500/case Features No PFAS Added Folded Length 5 Inches Unfolded Length 10 Inches Folded Width 5 Inches Unfolded Width 10 Inches Color Pink