Pole saw head and blades.
Steel hacksaw blades.
Iron rich material.
Used machine tools, industrial products.
Tools, stone.Sell quality sculpture stone and tools
A PCT (Pressure Cooker Test) chamber is a device used to test the resistance of materials, such as coatings or finishes, to water or steam under pressure. The chamber creates a high-pressure, high-temperature environment that simulates the conditions that materials may encounter in real-world applications, such as in the automotive or aerospace industries. During testing, samples of the material being evaluated are placed in the chamber, which is then pressurized and heated to a predetermined temperature. The samples are exposed to the water or steam for a specified amount of time, and their performance is then evaluated based on a range of factors, such as color change, blistering, or adhesion failure. PCT chambers are commonly used to test the corrosion resistance of coatings on metal substrates, as well as the performance of sealants and adhesives. They are also used in the development and testing of electronic components, as exposure to moisture can cause failure in electronic devices.
This product is for a variety of packaging materials, PC boards,electrical products .as well as the simulated transport vibrationtest of the packaged products, to assess the degree of vibration-resistance.... simulate the transport process Caused damage because of the vibration force, the test results can be used as the reference of the design packaging.
Features: Built in DDS signal generator, support 12 kinds of function signal. Capture output signal function, which can store up to 1000 capture signals. Targeted high intelligent decoding algorithm, the encoderlifeis infinite, and intelligent anti-burn function, 1X Can withstand up to 400V withstand voltage. With 100MHz * 2 ana-log bandwidth and @ 1GSa/s sampling rateï¼?1X = 5MHz, 10X = 100MHz). Fully fit 7 inch 800 * 480 resolution color TFT LCD display with bright colors and high contrast. High measurement voltage range: 1X can measure 0~40 V, 10X can measure 0~400V. Up to 12 parameters measurementï¼?VPPï¼?VPï¼?Vmaxï¼?Vminï¼?Vavgï¼?Vrmsï¼?Frequentï¼?Duty+ï¼?Duty-ï¼?Time+ï¼?Time-ï¼?Period. Cursor measurement function: it is convenient to manually measure the period and frequency and voltage. Complete triggering function (single, normal, automatic), and at any time, the waveform display (pause function) is frozen. Equipped with high efficiency One-button AUTO, and one-button waveform storage and screenshot function. Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data. Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc. Equipped with a USB interface, which can be connected to a com-puter to share its screenshots with the com-puter, which is convenient for secondary analysis. Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals. FFT display function, can analyze the spectral characteristics of the signal, memory compression technology, waveform refresh screen does not flicker. With the screen brightness adjustment function and background gr-id brightness adjustment function, also easy to carry.
Handheld oscilloscope, bandwidth 180MHz, Sampling rate 500MSa/s, refresh rate of up to 50000wfm/s. The DDS signal generator has 14 kinds of function signal waveforms and a free-customized chopping waveform.The frequency of the sine wave can reach up to 20MHz, and the other waveforms can reach up to 10MHz. It has three time base modes of YT, XY and rolling. Manual cursor measurement is suitable for measurements with large noise signals.
Measurement Modes: 40M the most could measure. Single, Multiple, Area, Volume measurement; Pythagorean, Second Pythagorean, Front and rear reference, Unit switching. Mobile App Intelligent Linkage, show the detection results on app interface.
12 Core functions to meet your needs: Trip record Fault code detection query Real-time detection of car conditions Whole vehicle depth scan Malfunction light delete Performance Testing Trip analysis Head up to display value Read data stream Throttle carbon deposit detection Precise Fuel Consumption monitoring Battery voltage Bluetooth V5.1 Protocolplug to use, Automatic connection 24 languages can be switched freely compatible with IOS, ANDROID
The FNIRSI GC-01 nuclear radiation detector uses a higher-precision Geiger-Miller counter. Counter for detecting the intensity of ionizing radiation (beta particles, gamma rays and x-rays). Use a gas tube or a small chamber as a probe.When the voltage applied to the probe reaches a certain range.Each time the ray is ionized in the tube to produce a pair of ions, it can be amplified to produce an electric pulse of the same size.And recorded by the connected electronic device.The number of rays per unit time thus measured.The alarm threshold measurement rate can be arbitrarily selected.
FNIRSI HS-01 Smart Electric Soldering Iron DC 96W 65W PD Power Constant Temperature & Fast Heating (1s Heating up, 6s Melting tin) Temperature Range: 80-420â?? CNC Metal integral Molding Smart safety anti-scald Power supply: USB Type-C port 0.87 inch OLED screen
EXTENSIVE"COMBAT" SCENARIOS: AC/DC voltage 1000V, on-off Buzzer, Capacitance 10mF, Resistance 100M, Frequency 10MHz, NCV voltage test, Diode, Zero/Fire Wire Check, Temperature 1000, Auto identify, Samrt anti-burn, Auto off, Data hold, Flashlight, Ture valid value.
FNIRSI DSO-TC3 combines a digital oscilloscope, electronic component tester, signal generator, continuity test, voltage test, temperature and humidity measurement, infrared decoding and other functions are skillfully integrated. It is equipped with a 2.4-inch color TFT display, built-in rechargeable lithium battery, brings users stronger and more practical functions with good portability. FNIRSI DSO-TC3 is an upgraded version of DSO-TC2. On the basis of DSO-TC2, it has upgraded capacitance ESR detection, function signal generator output, oscilloscope bandwidth and sampling rate improvement, input voltage and diode detection range increase and so on. The improvement in performance and function of DSO-TC3 makes the device more stable and accurate in the detection process.
DPOX180H is a cost-effective handheld dual-channel digital phosphor oscilloscope launched by FNIRSI with a two-in-one oscilloscope and signal generator. The oscilloscope has a real-time sampling rate of 500MSPS and an analog bandwidth of 180MHz. In terms of display, a high-contrast 2.8-inch IPS full-vision LCD screen and digital fluorescent technology are used. The waveform display effect is good, and the color ways are grayscale and color temperature. With a waveform refresh rate of up to 50000wfm/s, it is easier to display abnormal signals with low probability. The time base system includes a ZOOM time base for easy analysis of digital protocol signals. With a vertical sensitivity as low as 5mV, it can better measure small signals of 5mVPP. Ultra-high signal-to-noise ratio, fully sealed shielding measures, stable circuit feedback design, clean and clear waveform. The original adjustable automatic bandwidth limit and adaptive adjustable trigger suppression are suitable for analyzing and measuring signals with relatively large noise. 20M hardware bandwidth limit, can filter out noise above 20MHz. The trigger adopts digital trigger technology with high precision. It has three trigger modes: automatic/single/normal. It has a strong ability to capture periodic signals, burst signals and protocol signals. The DDS signal generator has 14 kinds of function signal waveforms and a free-customized chopping waveform. The frequency of the sine wave can reach up to 20MHz, and the other waveforms can reach up to 10MHz. The original chopping output function can store up to 500 customized signals. It has three time base modes of YT, XY and rolling. Manual cursor measurement is suitable for measurements with large noise signals. Efficient one-button automatic adjustment, adaptive 25%, 50%, 75% electric level trigger, it only takes 2 seconds to measure 1VPP/1KHz. Save waveforms and screenshots with one key, up to 250 sets of waveform data or 90 pictures can be stored, and 500 intercepted wave data can be stored at the same time. The data browser can browse and view the currently saved waveform data and pictures, and the waveform data supports operations such as zooming and moving. High voltage anti-burning protection, all gears can withstand high voltage up to 400V. USB data export, you can connect to a computer to copy picture files, and you can also copy system files to the oscilloscope for system upgrades. 5V2A fast charging, and 1 hour can charge to 80%.
Features: Intelligent anti-burn,1X can withstand up to 400V withstand voltage. 100MHz analog bandwidth @ 1GSa/s sampling rate (1X=5MHz,10X=100MHz). Fully fit 7 inch 800 * 480 resolution color TFT LCD display with bright colors and high contrast. Capacitive touching screen, the same as the touching mode of modern mobile tablet, is not a resistive touching screen with ancient nail operation. High measurement voltage range, 1X can measure 0~40V, 10X can measure 0~400V,100X can measure 0~4000V. Up to 12 parameters measurement: VPP,VP,Vmax,Vmin,Vavg,Vrms,Frequent,Duty+,Duty-,Time+,Time-,Period. Cursor measurement function, it is convenient to manually measure the period and frequency and voltage. Complete triggering function (single, normal, automatic). At any time, the waveform display (pause function) is frozen. Equipped with high efficiency One-button AUTO. One-button waveform storage and screenshot. Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data. Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc. Equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis. Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals. FFT display function, can analyze the spectral characteristics of the signal. Built in 6000mAh rechargeable lithium battery,fully charged for 4 hours of continuous use at the highest screen brightness. Memory compression technology, waveform refresh screen does not flicker. Screen brightness adjustment. Background grid brightness adjustment. Ultra thin, easy to carry. Specifications: Material: ABS Color: black+white Analog band width: 100MHz * 2 Number of channels: 2 channels Maximum real time sampling rate: 1GSa/s Vertical sensitivity: 50mV/div~500V/div Horizontal time base range: 50S/div~10nS/div Maximum test voltage: 40V (1X probe), 400V (10X probe) Storage depth: 240Kbit Input resistance: 1M ADC precision: 8bits Coupling mode: AC/DC Trigger mode: Single, Normal, Auto Trigger edge: Rising edge / Falling edge External trigger voltage: 0~40V Display: 7 inch - 800*480 Operating: capacitive touching screen + gesture Extension ports: USB picture export Power supply: 1 * lithium battery, 6000mAh (included) Item size: 184 * 124 * 50mm / 7.2 * 4.9 * 2.0in Package size: 200 * 134 * 60mm / 7.9 * 5.3 * 2.4in Package weight: 986g / 2.2lb
1. Wire rotary machine adopts Taiwan computer control system and Japanese servomotor, which has the characteristics of easy operation, high speed and high precision. 2. The five axis are cam axis, wire feeding axis, rotary wire axis, rotary quill axis, and spinner axis(optional accessory). The five axis can be operated synchronously. The position of each axis, the length of the wire feed, the production speed, and the number of production can be displayed on the screen. It is very easy to edit and modify the program data online. 3. The cam part has eight sets of slides, crank arm and CAM rotating axis. The wire feeding system is installed horizontally behind the machine. The wire rotary axis can control the rotation of wire, making the speed of high-difficulty special-shaped spring adjustment easier and faster.The rotating quill axis can be rotated positively or negatively, and the spinner device is installed on the slide. 4. The wire rotary spring machine can be applied to the production of lighting, electronics, toys, home appliances, sports equipment, automobile and other industries need precision spring. Specification: Model US-520R US-540R Axis 4/5 4/5 Wire Diameter 0.3-2.5mm 0.8-4.0mm Wire Wheel Sets 2sets 3sets Cam Axis 2.7KW 4.5KW Wire Feeding Axis 2.7KW 4.5KW Rotary Quill Axis 0.4KW 0.4KW Rotary Wire Axis 2KW 2.7KW Spinner Axis 0.4KW 1KW Machine Axis 1350*1500*1700mm3 1650*1700*1900mm3 Machine Weight 1200kg 2100kg FAQ 1. Q: How about the after service? A: We have a strong team, special for after service. We can arrange engineers to do service for you. 2. Q: Are you factory or trading company? A: We are a factory in this field nearly 20 years 3. Q: Where is your factory located? How can I visit there? A:Our factory is located in Shenzhen City. Guangdong province. When you arrive Shenzhen you can contact me,I will pick you up . 4. Q:How does your factory do regarding quality control? A:Quality is priority. From material selection to machine completion, we will spend a lot of time to strictly monitor the operation of the machine. If the machine does not meet the quality we require, we will not ship it.
Used equipment like conveyors, crushers, dryers & coolers, dust collectors, fans & blowers, feeders, mixers & blenders, packaging equipment, screeners.
Fiber laser marking machine, laser cutting machine, laser engraving machine, wood CNC router.After shipping: we will give you the tracking information