AUTOMOTIVE GAS OIL (AGO) - TTT (FOB Rotterdam & Houston) Minimum quantity: 25,000 metric tons per month, Maximum quantity: 300,000 metric tons per month Procedure: 1. Buyer accepts seller's working procedure and issues ICPO to the End seller via Seller's representative. 2. Seller issues a commercial invoice and Buyer signs and returns commercial invoice on the due date along with Buyer TSA. 3. The Seller issues the following PPOP to the buyer for evaluation: a) Statement of Product Availability b) IPA c) Letter of Guarantee Upon receipt of the above PPOP Documents, the buyer provides signed IPA (Injection Programming Agreement) with his tank company to engage in injection Programming. 4. Seller provides the buyer with an Injection program a) Fresh SGS, b) Certificate Of Origin. c) ATSC (Authority to Sell and Collect) d) Tank Storage Receipt (TSR) e) Injection Report, and ATV (Physical Verification) with Unconditional DTA for Dip Test in the seller tank for product reconfirmation before injection into buyer tank. f) NCNDA/IMPFA draft to be signed by all intermediaries to secure commission. 5. Buyer makes 100% payment by MT103 TT wire transfer for the total product and Seller pays commission to all intermediaries involved in the transaction within 24 hours after confirmation of the buyer's payment. 6. Seller issues draft SPA to the buyer to review for R&E monthly deliveries. 7. Buyer reviews and approves the SPA and issues SBLC/IRDLC irrevocable, non- transferable, auto revolving for 12 months shipment value, documentary letter of credit for length of contract and for each lift per schedule. Buyer pays after Dip Test by MT103 Wire Transfer one each monthly quantity. 8. The subsequent delivery shall commence according to the terms and conditions of the contract. 9. Seller pays commissions to all intermediaries as per IMFPA/NCNDA 24 hours after receiving payment from the buyer.
EN590 10 PPM - TTT (FOB Rotterdam & Houston) Minimum quantity: 25,000 Metric tons per month Maximum quantity: 300,000 Metric tons per month Procedure: 1. Buyer accepts seller's working procedure and issues ICPO to the End seller via Seller's representative. 2. Seller issues a commercial invoice and Buyer signs and returns commercial invoice on the due date along with Buyer TSA. 3. The Seller issues the following PPOP to the buyer for evaluation: a) Statement of Product Availability b) IPA c) Letter of Guarantee Upon receipt of the above PPOP Documents, the buyer provides signed IPA (Injection Programming Agreement) with his tank company to engage in injection Programming. 4. Seller provides the buyer with an Injection program a) Fresh SGS, b) Certificate Of Origin. c) ATSC (Authority to Sell and Collect) d) Tank Storage Receipt (TSR) e) Injection Report, and ATV (Physical Verification) with Unconditional DTA for Dip Test in the seller tank for product reconfirmation before injection into buyer tank. f) NCNDA/IMPFA draft to be signed by all intermediaries to secure commission. 5. Buyer makes 100% payment by MT103 TT wire transfer for the total product and Seller pays commission to all intermediaries involved in the transaction within 24 hours after confirmation of the buyer's payment. 6. Seller issues draft SPA to the buyer to review for R&E monthly deliveries. 7. Buyer reviews and approves the SPA and issues SBLC/IRDLC irrevocable, non- transferable, auto revolving for 12 months shipment value, documentary letter of credit for length of contract and for each lift per schedule. Buyer pays after Dip Test by MT103 Wire Transfer one each monthly quantity. 8. The subsequent delivery shall commence according to the terms and conditions of the contract. 9. Seller pays commissions to all intermediaries as per IMFPA/NCNDA 24 hours after receiving payment from the buyer.
JET A1 FUEL (FOB) Minimum quantity: 500,000 barrels per month Maximum quantity: 5,000,000 barrels per month Procedure: 1. Buyer accepts seller's working procedure and issues ICPO to the End seller via Seller's representative. 2. Seller issues a commercial invoice and Buyer signs and returns commercial invoice on the due date along with Buyer TSA. 3. The Seller issues the following PPOP to the buyer for evaluation: a) Statement of Product Availability b) IPA c) Letter of Guarantee Upon receipt of the above PPOP Documents, the buyer provides signed IPA (Injection Programming Agreement) with his tank company to engage in injection Programming. 4. Seller provides the buyer with an Injection program a) Fresh SGS, b) Certificate Of Origin. c) ATSC (Authority to Sell and Collect) d) Tank Storage Receipt (TSR) e) Injection Report, and ATV (Physical Verification) with Unconditional DTA for Dip Test in the seller tank for product reconfirmation before injection into buyer tank. f) NCNDA/IMPFA draft to be signed by all intermediaries to secure commission. 5. Buyer makes 100% payment by MT103 TT wire transfer for the total product and Seller pays commission to all intermediaries involved in the transaction within 24 hours after confirmation of the buyer's payment. 6. Seller issues draft SPA to the buyer to review for R&E monthly deliveries. 7. Buyer reviews and approves the SPA and issues SBLC/IRDLC irrevocable, non- transferable, auto revolving for 12 months shipment value, documentary letter of credit for length of contract and for each lift per schedule. Buyer pays after Dip Test by MT103 Wire Transfer one each monthly quantity. 8. The subsequent delivery shall commence according to the terms and conditions of the contract. 9. Seller pays commissions to all intermediaries as per IMFPA/NCNDA 24 hours after receiving payment from the buyer.
Looking for new customers samples available car and truck heavy sidewalls free sample containers free sample of sidewalls and loading just 25.00 dollar paperwork fee From truck 22.5 and 24.5 tire size very heavy steel more pictures upon request view a sample load for free see what we have then let's talk long term
This Surgical Mask is made of Polypropylene Spunbond and Meltblown nonwoven fabrics with adjustable nose strip and round elastic ear loop to give basic protection to the user. Blue Non-woven Fabric: PP Spunbond: Cut into 175 MM for adult size, Density from 25 GSM, Regular standard or SS standard, Blue color available Filtering Material: Melt-blown Fabric: 25 GSM for normal, use one layer, Cut into 175 MM for adult size White None-woven Fabric: Cut into 195 MM for adult size, Regular standard. Plastic Nose Wire: 100% PE, width in 3MM Round Elastic Band: For wearerâ??s comfort wearing the soft Ear Loop Elastic is used. Diameter is 2.5. Benefits: Complete Automatic Manufacturing Process Non irritating, fiber glass free fabric Great Breathability Maximum Filtration Super Comforting Without Glass Fibers Water Resistance Hypoallergenic Nose Bar Adaptable Hygienic
We introduce IsoGrip Sound Isolation - soundproofing mounting clips: designed with high-quality metal and rubber, and feature a unique design that helps decouple walls, ceilings, or floors from the surrounding structure to provide an acoustic experience. IsoGrip Soundproofing Clips can be easily installed on wood, steel, concrete and more. It reduces all kinds of noise to create a peaceful and quieter environment in residential, commercial, and industrial spaces. The advanced technology used in IsoGrip Soundproofing Clips provides a better sound reduction which absorbs the vibration and to reduce the sound transmission. These clips are known for their durability and long-lasting performance, maintaining their sound isolation properties over time. They are typically installed during the construction or renovation process. About IsoGrip Sound Isolation Clips - Soundproofing clips Used in multi-million $ projects in Randolph, Franklin, Stoughton, MA - USA Total soundproofing solution Highly effective for impact sound isolation Minimise the transfer of airborne and impact sounds Decouples ceilings and walls from supporting joists and walls. Easy installation process Provides long-term durability and performance Suitable for framing with wood, steel framed, concrete, CMU, and other ceiling or wall assemblies Provides acoustic performance of walls and ceilings Supplying capacity of 50,000 at a time. Unbeatable pricing on orders above 10,000 pieces Free samples anywhere in the USA.
Daily Family Supper & Holiday Seating For 12 1-Solid Pine Slab 4'' Table 94.08'' Long x 47.24'' Wide 31.49'' Height x 3.93'' Thick 5-pc Set-Wide Solid Pine Slab Comfortable Bench Seating 2- End Solid Pine Hand Quality Crafted Chairs Solid Pine Slab Strong Table Base Fabricated Industrial Steel Quality Table Base 8-pc Solid Pine Slab Table & Bench - Set $2,525 USD 8-pc Teak Solid Slab Table & Bench Set 12Seats - $3,175 USD
Fully automated operations with datalogging, remote access and control Multi-purpose application utilizing either outside-in or inside-out. Independent side by side comparison possible. Flow rate 28800-40000 gpd (20-29 gpm) Weight Shipping: 2000 pound Operating: 2400 pound Dimensions 5 ft W x 9 1/4 ft L x 8 1/2 ft H Membrane Modules 1. NORIT X-FLOW 23E1FL295H 2. HYDRAcap 60 Or any other pressurized manufacturer. Frame material Carbon Steel Power 230V, 3PH, 60 Hz, 40 Amps, NEMA 12
Utility Adjustable Weight Bench is a very functional weight bench. This adjustable utility bench has 10 adjustable angles (ranging from -10 to 80 ) making it the suitable bench for incline, flat, as well as decline exercises. In addition, it can also be easily steered due to the incorporated handle and also wheels. Item Attributes: Multi-Bench Super Bench, Adjustable Utility Bench. Ideal Fitness Flat Incline Decline Foldable Bench. Heavy-duty steel framework. Scrape & chip resistant powder coat finish. No assembly needed. Indoor usage only.
Tubing Head Tubing head is a vital component in the oil and gas industry, enabling the safe and efficient production of hydrocarbons from underground reservoirs. It provides a secure connection for production tubing, controls wellbore pressure, and helps maintain the integrity of the wellhead system. Description The Tubing Head is an adapter between the first casing column and the blowout preventer set (during drilling) or wellhead (after completion). The adapter can be threaded or welded to the casing and can have flanged or clamped connections to match the blowout preventer set or wellhead. It is the primary interface for pressure control equipment. At the time of installation, the casing head is usually tested for very stringent pressure and leakage parameters prior to the installation of any surface equipment to ensure viability under blowout conditions. Characteristics The tubing head and tubing cross are used to suspend the tubing and seal the annular space of tubing. Its characteristics are: 1. The secondary sealing form between the tubing hanging and the reducer flange includes O-ring seal, greased BT seal and metal-to-metal seal; 2. The sealing forms of tubing hanging and tubing head are metal-metal seal, special synthetic rubber seal or metal seal + special synthetic rubber seal; 3. With grease injection port and sealed test port; 4. The lower sealing form of the tubing head includes O-ring seal, greased BT seal and metal seal; 5. The tubing hanging and tubing head reducer flange can directly pass through the cable and can be equipped with a downhole safety valve control pipeline interface; 6.The side exit link is threaded or wire-flange type, and is equipped with VR thread for easy valve replacement operation.
The DISPLPORT3L 3ft DisplayPort 1.2 Cable with latches provides a secure, connection between your DisplayPort-equipped devices and is capable of providing higher performance than either HDMI or dual link DVI. The DP cable supports high resolutions of up to 4k x 2k (4096 x 2160) @ 60Hz with a maximum HBR2 bandwidth of 21.6 Gbps. The cable also supports Multi-Stream (MST) for daisy chaining multiple monitors and provides optional audio support. The DISPLPORT3L is backed by StarTech.comâ??s Lifetime Warranty, for guaranteed reliability and ensures that digitally protected content is displayed properly, with both HDCP and DPCP capability. HIGH PERFORMANCE CABLE: This 3ft (1m) VESA Certified DisplayPort v1.2 cable supports 4K x 2K (3840x2400p 60Hz), 21.6 Gbps bandwidth, HBR2, 8Ch Audio, Multi-Stream Transport (MST), GTC for precise audio channel timing & 3D Stereo (2560x1600p 120Hz) RELIABLE DESIGN: Durable ABS connectors with flexible PVC strain relief & jacket prevents fraying/damage due to bending or rough usage; Metal connector sub-structure provides EMI shielding; Latching DP connectors prevent accidental disconnection QUALITY CONSTRUCTION: 28AWG wire with gold-plated connectors for improved signal integrity and reliability; Superior EMI shielding with Al-Mylar foil and copper braid provides higher quality video and audio; Backwards compatible with DP 1.1 APPLICATIONS: Ideal for home/offices/boardrooms/conference rooms/classrooms; works with your professional workstations with FireProâ?¢ S9000/7000, W8100/7100/5100 or R5000 graphic cards; Use with 1080p/UHD/4K monitors, projector or large display SPECS: 3 ft (1 m) | Black | DisplayPort v1.2 | DP Latching Male to Male | 28 AWG | PVC cable jacket, ABS connector shell | Shield: Al-Mylar foil with Braid | Protocols: HBR 2, MST, GTC | Lifetime Warranty
The check valve is a kind of one-way valve, which relies on the pressure of the medium to realize the metal seal between the spool and the valve body, the greater the medium pressure, the better the sealing performance. Product Description The check valve is a kind of one-way valve, which relies on the pressure of the medium to realize the metal seal between the spool and the valve body, the greater the medium pressure, the better the sealing performance. The check valve design and manufacture of APImeivalve fully meet the requirements of API spec 6A and can be used interchangeably with equipment conforming to API spec 6A. The valve body is made of alloy steel forging, with strong mechanical properties, and can withstand high pressure, with safe and reliable performance. The bonnet and valve body are bolted together, and the seal is the sealing ring on the bonnet and the inner wall of the valve body. The sealing performance is reliable. It provides minimal assembly clearance between the bonnet and body (designed to be 0), thereby reducing erosion of bolts and holes by corrosive media and reducing bolt loads. Hard alloy is hard-faced on the core and sealing surface of the valve body so that it has good wear resistance and corrosion resistance. The core material should use sulfur-proof steel, and other parts should use the method of limiting hardness so that the valve can be used in an environment containing H2S. Install the valve body into the pipeline according to the flow direction on the valve body. The valve core by the upper and lower pressure to achieve movement and sealing so that the valve core can not be stuck. Technical Parameters 1. One-way flow of the working medium. 2. Working pressure: 2,000 psi ~ 20,000 psi 3. Nominal diameter: 2.1/16 "~ 4.1/16" (52mm ~ 103mm) 4. Working medium: oil, natural gas, mud, H2S and CO2 gas 5. Operating temperature: -46C ~ 121C (LU level) 6. Material level: AA, BB, CC, DD, EE, FF, HH 7. Specification level: PSL1 ~ 4 8. Performance level: PR1 ~ 2
The check valve is a kind of one-way valve, which relies on the pressure of the medium to realize the metal seal between the spool and the valve body, the greater the medium pressure, the better the sealing performance. The check valve design and manufacture of APImeivalve fully meet the requirements of API spec 6A and can be used interchangeably with domestic and foreign equipment conforming to API spec 6A. The valve body is made of alloy steel forging, with strong mechanical properties, and can withstand high pressure, with safe and reliable performance. The bonnet and valve body are bolted together, and the seal is the sealing ring on the bonnet and the inner wall of the valve body. The sealing performance is reliable. It provides minimal assembly clearance between the bonnet and body (designed to be 0), thereby reducing erosion of bolts and holes by corrosive media and reducing bolt loads. Hard alloy is hard-faced on the core and sealing surface of the valve body so that it has good wear resistance and corrosion resistance. The core material should use sulfur-proof steel, and other parts should use the method of limiting hardness so that the valve can be used in an environment containing H2S. Install the valve body into the pipeline according to the flow direction on the valve body. The valve core by the upper and lower pressure to achieve movement and sealing so that the valve core can not be stuck. Technical Parameters 1. One-way flow of the working medium. 2. Working pressure: 2,000 psi 20,000 psi 3. Nominal diameter: 2.1/16 4.1/16 (52mm 103mm) 4. Working medium: oil, natural gas, mud, H2S and CO2 gas 5. Operating temperature: -46 C 121 C (LU level) 6. Material level: AA, BB, CC, DD, EE, FF, HH 7. Specification level: PSL1 4 8.Performance level: PR1 2
Product Description 1. The Ring Joint Gasket Type: BX, RX, R(Oval & Octagonal), the Ring Joint Gasket is mainly used in high-pressure, and temperature applications in the petroleum industry. Mostly used for Valves, Pipes and Flanges. 2. Standard R types are in accordance with API 6A and ASME B 16.2 size. For both Oval and Octagonal configurations. They can interchange on the modern octagonal-type groove flange. 3. RX Type ring joint gaskets are manufactured to fit the API 6B flange"s groove, interchangeable with R(oval) and R(octagonal) series, bear pressure can reach 15000 PSI, so these gaskets performance excellent in 6B flange, suitable to the higher pressures with higher vibrations and heavier weights of these units. Spec.: RX20~RX215 4. BX-type ring joint gaskets are designed for BX flange grooves only, it is suitable for higher-pressure ratings starting at 2, 000 lbs and ending with 20, 000 lbs, incorporate a pressure balance hole to ensure equalization of pressure which may get trapped in the grooves. 5. The Ring Joint Gasket materials: Carbon Steel, Soft Iron, SS304, F5, 321, 304L, 316L, 316, 347. Or other materials according to your request.
DIAMETERLONG OF THE WOOD FORMULA HOPPUS QUALITY Price FOB DiscountDiscount TYPE: A19 M3 X Load GirthLenght 61 cm65 cm 4.50 Mts - 6 Mts - 10 Mtsn/an/a Fresh cut only$375.00 66 cm70 cm 4.50 Mts - 6 Mts - 10 Mtsn/an/a No steels$390.00 71 cm75 cm 4.50 Mts - 6 Mts - 10 Mtsn/an/a No curves$420.00 76 cm80 cm 4.50 Mts - 6 Mts - 10 Mtsn/an/a Good color $445.00 81 cm85 cm 4.50 Mts - 6 Mts - 10 Mtsn/an/a No split or Shake$470.00 86 cm90 cm 4.50 Mts - 6 Mts - 10 Mtsn/an/a $495.00 91 cm95 cm 4.50 Mts - 6 Mts - 10 Mtsn/an/a $525.00 96 cm100 cm 4.50 Mts - 6 Mts - 10 Mtsn/an/a $550.00 101 cm105 cm 4.50 Mts - 6 Mts - 10 Mtsn/an/a $575.00 106 cm110 cm 4.50 Mts - 6 Mts - 10 Mtsn/an/a $595.00 111 cm120 cm 4.50 Mts - 6 Mts - 10 Mtsn/an/a $610.00 121up 4.50 Mts - 6 Mts - 10 Mtsn/an/a $630.00 Is negotiable
We are supplier and exporter of Copper Cathode (Electrolytic Grade A) . Our Copper cathodes are a basic form of copper with a purity of more than 95%.  We mine and process Grade A copper cathodes with a purity of between� 99.97 -99.99%. The cathodes we sell are in the form of sheets that measure 914mm x 914mm x 12mm {standard LME measurements}. Weight of each sheet: 125kgs +/- 1% Net weight of each pallet: 2M/T +/- 1% Min. Weighs in each container: 20 M/T appr Gross weight of each container: 22.2M/T appr. The goods comes from Africa. We can supply up to 100,000 MT per month. Price: LME DISCOUNT per MT as CIF, Min.order 5000MT. Payment: SBLC or BG for the whole order guarantee, payment by T.T MT103 at the destination port after the inspection report issue by SGS or CCIC; 2%PB provided by the seller for goods guarantee. Our copper cathodes are currently being used as a raw material in the manufacture of various products such as copper rod, transformers, steel alloys, and in motor vehicles.
Di 500-ar /18 meg ohm di system Up to 500 gallons of 17< meg ohm di water per 24 hrs Pre filter, ro filter, di resin filter, recirculation polish filter Digital dual chanel tds meter on ro system Tin lined swivel faucet with sink in deck Digital resistivity meter with alarm 100 gallon di tank with recirculation pump uvand dual 20" resin filters High and low level switches on di tank Front mounted controls Auto level control in sump Pressure gauge on ro system Booster pump on ro system Pressure gauge on di loop Uv filter on di recirculation polish filters Loop system for up to 25 take off points System is mounted in an epoxy coated steel frame with containment deck Options: Remote control panel Point of use filters and faucets for installation in hoods Pressure regulator for take off point pressure control
Meivalve company providing products including wellhead equipment and christmas tree, choke and kill manifold, mud manifold, casing head, tubing head, fracturing head, all kinds of high pressure valvesï¼?high pressure swivel joint, hammer union. Main products products are performing API 6A 16C standard, and can provide special product customization service according to customer's requir. Description The plug valve is an important part to connect the high-pressure manifold during cementing and fracturing operations and is also suitable for the control of other high-pressure fluids. The end of the plug valve is connected by the hammer union plug valve, LP internal thread connection and LP external thread connection. At the same time according to customer requirements to design a base high-pressure plug valve; Plug valve is mainly composed of the valve body, sealing arc slice, plug and other parts; Plug valve specifications are 1", 2", 3", cold working pressure 42Mpa (6000Psi), 70Mpa (10000Psi), 105Mpa(15000Psi) three grades, can be used at room temperature, low temperature and sulfur gas conditions and repair kit. The low-torque plug valves designed and manufactured by our company are all forged from high-quality high-strength alloy structural steel. The materials used are in full compliance with ASTM and AISI standards, and the product specifications are in full compliance with API Spec 6A. The plug valve manufactured by our company has a specification level of pls1-3 and a performance level of pr1-2, which can be interchanged with similar products of SPM and is widely used in cementing equipment and fracturing equipment.
Sapphires, ruby, tourmaline, topaz , emeralds, copper ore , red copper oxides , copper cathodes & galena lead oxide.
Cast iron casting, ductile iron casting, steel casting, investment casting parts for like insulator metal caps, insulator metal flanges, trailer leaf spring equalizers, submersible pump parts, rotavator gear body and hydraulic lifters, trucks break drums clutch plates.
