UAE Plastic Drum Barrel Suppliers and Manufacturers

Sodium chlorate is an inorganic compound with the chemical formula NaClO3. It is a white crystalline powder that is readily soluble in water. It is hygroscopic. It decomposes above 300 C to release oxygen and leaves sodium chloride. Several hundred million tons are produced annually, mainly for applications in bleaching pulp to produce high brightness paper. The main commercial use for sodium chlorate is for making chlorine dioxide (ClO2). The largest application of ClO2, which accounts for about 95% of the use of chlorate, is in bleaching of pulp. All other, less important chlorates are derived from sodium chlorate, usually by salt metathesis with the corresponding chloride. All perchlorate compounds are produced industrially by the oxidation of solutions of sodium chlorate by electrolysis.

Fibre Fill Polyester Filling Microfiber Fiber 0.9d Down Like Virgin Micro Gel Fiber Hot Sale Virgin Down Like Polyester Fiber filling fiber hollow conjugated fibers recycled polyester stuffing fiber 1) Denier:0.8D-1.5D 2) Cut length:22MM/25MM/32MM/38MM/51MM/64MM/71MM/76MM 3) Luster:raw white Virgin and recycled grade 4) Siliconized and no siliconized 5) Merits: high intension, stable stretch elongation, highly elastic, puffed, high ratio of hollowness 6)Excellent fluffy performance, pleasing hand feeling, plump, gentle, luster 7) Usage: suitable for filling toys, pillows, cushions, and other products need to be filled ; make pearl cotton. bedclothes , man-made fur, filler materials, sofa and others 8) Weight: around 300kgs/bale 9) Package: woven bag Container load: around 34 bales for a 20GP,around80 balesfor a 40HQ 10) Delivery Time: within 15 days after receiving the deposit

3mm 6mm 100% Virgin New PP Material Staple Monofilament Polypropylene Fiber 0086-13915721168 Product number: PP Micro fiber Equivalent diameter: 15-48 um Elastic Modulus: â?¥3500 M�·pa Breaking strength: â?¥ 560 M�·Pa melting point: 160-180�°C proportion: 0.91-0.93 g/cm�³ length: 3-20mm (as custom requirement) Acid and alkali resistance (strong retention rate) â?¥96% 1. PP pressed Woven Bag 2. 300-350kg/ bale 3. About 9-10Tons / 20'FCL 4. About 21-22Tons / 40'FCL

100% Polyester 30S/1 Ring Spun Yarn Raw White Polyester Yarn Material: 100% Polyester, 100% Polyetser Pattern: Raw white Technics: RING SPUN Yarn Type: Spun Feature: High Tenacity Use: Weaving, Knitting, Sewing Twist: Standard Evenness: Excellent Yarn Count: 30S/1 Place of Origin: IRAN Samples: free Package: yarns on cone

Specification: 3-110D * cutting length 5~102mm, color can be according to customer`s requirement. Our products can be used in non-woven, automotive interiors, geo-textiles, speaker cloth and needle carpet, spinning wool, filters, adsorption materials. Our fiber also can be added flame retardant, anti-UV, anti-aging properties according to the customer's requirement.

Making wadding and padding materials 7D*64mm HC non silicon polyester staple fiber white color 054310599 Our siliconized fiber mainly can be used in home textile, such as filling sofa, pillow, cushion and winter clothing and non siliconized mainly can be used in non woven fabrics, such as padding, mattress and wadding.

Regenerated 1.4D 1.5D 3D 6D 7D 15D Black Polyester Staple Fiber for Nonwoven Carpet -Textile yarns.the end products are clothing, home textiles, decorative cloth, etc. -Nonwoven. the end products are wet wipes, masks, etc. -Filling.the end products are winter clothes, pillows, toys,etc.

ES fiber is a sheath-core composite fiber obtained by successfully combining low-melting components and high-melting components on a single fiber. It has excellent thermal bonding properties. The low melting point component in ES fiber melts under heat treatment conditions higher than its melting point, and bond with other materials to form a binder-free environmentally and friendly non-woven fabric. ES fiber has various advantages such as soft, fluffy, low-temperature processing, heat-bonding, plasticity, non-toxic, non-irritating, and lightweight. It is mainly used to manufacture high-quality sanitary products such as sanitary napkins and diapers. And it is also high-quality materials used to make medical products such as medical protective cloth and medical protective masks, and so on. There are two main types of ES fibers. The first kind is a composite of PE and PP. Its sheath layer is PE (polyethylene, melting point 130�°C), and its core layer is PP (polypropylene, melting point 165�°C). The second kind is a composite of PE and PE. Its sheath layer is PE, and the core layer is PET (polyester, melting point 255â??), which is an upgraded version of PE/PP. ES is divided into EP and ET in terms of material and functionally divided into the hydrophilic, water-repellent, hydrophilic, and weak parent, single parent, multi-parent.In addition, it also can be divided into whitening, general whitening, high holding, medium holding, and low holding. The specifications are 1.5D38mm, 2D38mm, 4D51mm, and so on. In the future, the trend will gradually develop towards fine deniers. SPECIFICATION: PE+PET ES Fiber: Optical White & Super Hydrophile 2D*38mm, Optical White & Hydrophile 2D*38mmï¼? Optical White & Water Repellency 2D*38mmï¼? RAW White & Water Repellency 2D*38mmï¼? Optical White & Super Hydrophile 1.5D*38mmï¼? Optical White & Water Repellency 1.5D*38mmï¼? RAW White & Water Repellency 1.5D*38mï¼? Hydrophile 2D*38mmï¼? Water Repellency 2D*38mm PE+PP ES Fiber: Hydrophile (P2Q) 2D*38mm

Bleached Softwood Pulp is commonly used in the production of most paper, paperboard and tissue products. Softwood pulp brings strength to the end product, as well as runnability and excellent dewatering properties to the production process.

Spodumene, lithium ore, lithium concentrate content Li2O 5-8% or more Long-term supply of spodumene ore and lithium concentrate, with different contents of 5%, 6%, and 7% or more can be supplied. It can supply about 1000-2000 tons per month. Interested ceramic glass factories or traders are welcome to contact us. Li2O: 6.00%, Al2O3: 25.56%, SiO2: 63.72%, Fe2O3: 0.26% CaO: 0.17%

Lead, Zinc Ore from Nigeria

New-type hot-connectivity composite fiber is made from different types of modified high molecular materials through advanced composite spining technology. It has unique characteristic of melting at low temperature, and after hot treatment, it can naturally adhere without use of binder, green and environmental. The product abides by strict sanitation control standards to achieve sanitation material grade. The products include ES fiber and ETS modified polyester composite staple fiber which is initiated by the company, and can be applied to production of surface layer and guide layer of disposable sanitary articles Functional characteristic the product is a kind of chemical blend provided with advantages of the two materials. ES fiber has low melting point on the superficial layer, soft, bouffant and pervious, while the core layer has certain intensity and fiber state. ETS fiber is provided with advantages of heat bonding, high hygroscopicity and antistatic property, etc. Application scope the sanitary products are applicable to hot air penetrating technology to produce surface layer and guide layer of disposable sanitary materials such as paper diaper and sanitary towel; the conventional low-melting fiber is applicable to production of hard cotton, decorative wall board, environmental mattress, seat mat, environmental filter media, constructional acoustic damping and heat insulation materials, etc. Specification 4D*51MMã??4D*32MM

Nylon 6 (Polyamide 6) Specification General Description: Nylon 6, also known as Polyamide 6 (PA6), is a versatile engineering thermoplastic known for its high mechanical strength, toughness, and excellent wear resistance. It is widely used in various industrial applications due to its balance of properties. Material Properties: Chemical Name: Polyamide 6 (PA6) CAS Number: 25038-54-4 Color: Natural (milky white), can be pigmented to various colors Mechanical Properties: Tensile Strength: 75 - 90 MPa Elongation at Break: 30 - 300% Flexural Modulus: 2,500 - 3,300 MPa Impact Strength (Izod, Notched): 5 - 13 kJ/m Hardness (Rockwell): R120 Thermal Properties: Melting Temperature: 215 - 225C Glass Transition Temperature: 40 - 50C Continuous Service Temperature: -40 to 100C (short-term up to 150C) Thermal Conductivity: 0.23 W/(m·K) Electrical Properties: Volume Resistivity: 10^12 - 10^14 ·cm Dielectric Strength: 20 - 30 kV/mm Dielectric Constant: 3.7 - 4.2 at 1 MHz Physical Properties: Density: 1.13 - 1.15 g/cm³ Water Absorption: 1.3 - 1.9% (24 hours at 23C) Chemical Resistance: Resistant to: Alkalies, oils, greases, hydrocarbons Not Resistant to: Strong acids, phenols, chlorinated hydrocarbons Processing Information: Molding Temperature: 230 - 290C Mold Temperature: 70 - 90C Drying: 80C for 4-6 hours before processing Extrusion Temperature: 220 - 250C Applications: Automotive Parts: Gears, bearings, housings, and other under-the-hood components Industrial Components: Machine parts, conveyor belts, and bushings Consumer Goods: Sports equipment, kitchen utensils, and electronic housings Textile Industry: Filaments, fibers, and threads Standards and Compliance: ASTM Standards: D4066, D6779 ISO Standards: ISO 1043-1, ISO 1874-1 RoHS Compliant: Yes REACH Compliant: Yes Safety and Handling: Hazards: Generally regarded as safe, but melting and processing should be conducted in well-ventilated areas to avoid inhalation of fumes. Storage: Keep in a cool, dry place. Protect from moisture to maintain material integrity. This specification provides an overview of Nylon 6 (PA6) and its key properties, ensuring it meets the requirements for various applications in engineering and industrial fields.

PA6, also known as Polyamide 6 or Nylon 6, is a thermoplastic material widely used in engineering applications due to its excellent mechanical properties, high durability, and resistance to abrasion and chemicals. It is characterized by its strength, stiffness, and toughness, making it ideal for producing various industrial components such as gears, bearings, and housings. PA6 also exhibits good electrical insulating properties and can be easily processed through injection molding and extrusion, making it versatile for numerous manufacturing applications.

Polyamide 6 (Nylon 6) Description Polyamide 6, also known as Nylon 6, is a synthetic polymer that belongs to the polyamide family. It is a versatile and widely used engineering thermoplastic known for its excellent mechanical properties, thermal stability, and chemical resistance. Here's a detailed description: Properties: High Strength and Durability: Polyamide 6 exhibits high tensile strength and toughness, making it ideal for demanding engineering applications. Excellent Wear Resistance: It has superior abrasion resistance, which contributes to its longevity in applications involving friction and wear. Good Thermal Stability: Polyamide 6 can withstand high temperatures, maintaining its properties and performance in various thermal conditions. Chemical Resistance: It is resistant to many chemicals, oils, and solvents, making it suitable for use in harsh environments. Good Impact Resistance: The material can absorb and withstand significant impacts without cracking or breaking. Low Friction Coefficient: This property makes it ideal for use in applications involving moving parts, reducing wear and tear. Applications: Automotive Industry: Used in manufacturing parts such as gears, bearings, and engine components due to its strength and durability. Textiles: Utilized in the production of fabrics, ropes, and threads owing to its excellent fiber-forming properties. Electrical and Electronics: Employed in making connectors, insulators, and other electronic components because of its good insulating properties. Industrial Machinery: Suitable for making various machine parts, including rollers, pulleys, and sprockets. Consumer Goods: Commonly used in the production of household items, sports equipment, and kitchen utensils. Advantages: Versatility: Can be molded into various shapes and forms, catering to a wide range of industrial and consumer applications. Lightweight: Despite its strength, Polyamide 6 is relatively lightweight, offering ease of handling and installation. Recyclability: It is recyclable, contributing to sustainability and environmental conservation efforts. Cost-Effective: Offers a good balance of performance and cost, making it a preferred choice in many industries. Polyamide 6 (Nylon 6) is an indispensable material in modern manufacturing, providing a blend of performance, reliability, and versatility that meets the needs of numerous applications.

LDPE/FR refers to low-density polyethylene with flame retardant properties. LDPE (Low-Density Polyethylene) is a type of thermoplastic known for its flexibility, toughness, and chemical resistance. When it's treated with flame retardant additives, it becomes LDPE/FR, which is more suitable for applications where fire safety is a concern. A "mineral-filled thermoplastic core" likely refers to the addition of mineral fillers to the LDPE/FR matrix. Mineral fillers can enhance various properties of thermoplastics, such as stiffness, dimensional stability, and thermal conductivity. Common mineral fillers include calcium carbonate, talc, and mica. Combining LDPE/FR with a mineral-filled core can result in a composite material that offers improved fire resistance and mechanical properties compared to pure LDPE/FR. This composite could find applications in industries where both fire safety and structural integrity are crucial, such as construction, transportation, and electronics.

LDPE stands for Low-Density Polyethylene, which is a type of thermoplastic made from the monomer ethylene. LDPE is commonly used in various applications due to its flexibility, transparency, and chemical resistance. LDPE is often used as a core material in composite panels, particularly in the construction industry. Composite panels with LDPE polyethylene cores are known for their lightweight properties, making them suitable for applications where weight is a concern. Additionally, LDPE cores provide insulation and soundproofing properties, enhancing the performance of composite panels in building construction. However, it's essential to note that while LDPE offers certain advantages, it may have limitations in terms of fire resistance and structural strength compared to other materials used in composite panels, such as aluminum or fire-retardant cores. Therefore, the selection of materials for composite panels depends on specific project requirements, including regulatory standards and performance criteria.