Hardener is a white powder which is used to fast cure the urea formaldehyde adhesive during application. It is mixed with adhesive prior to final application. After mixing with adhesive, dependent on the amount of hardener and temperature of application, curing of polymer occurs within a specified time range. Application â?¢ This powder product is used as a catalyst to accelerate the action of UF adhesive in the chipboard manufacturing.
PVC resin is a polymer compound formed by polymerization of vinyl chloride monomer (VCM), and its structure unit is [CH2-CHCL]n. polymerization degree is usually 590-1500. According to the content of residual polyethylene monomer in PVC resin can be divided into: industrial grade, food hygiene grade and medical grade. The appearance of PVC resin is white powder. PVC resin SG3 SG5 SG8 is flame-retardant (flame retardant value above 40), high chemical resistance (resistant to concentrated hydrochloric acid, 90% sulfuric acid, 60% nitric acid and 20% sodium hydroxide), mechanical strength And the advantages of good electrical insulation. But its heat resistance is poor, with a softening point of 80�°C, it starts to decompose and change color at 130�°C, and precipitate HCI. Application: It is widely used in the production of polyvinyl chloride boardy leatheroid, paint and adhesive agents, paint and adhesive. Packing: 25kgs two layers draft paper bag or 1000kgs PP bag.
We Supply cold vulcanising solutions for conveyor belt joining / rubber to rubber bonding. Rubber lining etc. We have make Germany & India Origins in bulk quantities. COLD BONDING SOLUTIONS !! COLD VULCANISATION MOQ: 20 ft container or LCL shipments accept GCC or worldwide
Mono Ethylene Glycol MEG is a clear, colourless, virtually odourless, and slightly viscous liquid. It is miscible with water, alcohols, and many organic compounds, and has the molecular formula C2H6O2, CAS: 107-21-1. It has a specific gravity of 1.115 and a flash point of 110°C. Application: It is an important raw material for industrial applications. MEG is utilized in the manufacture of polyester (PET) resins, films, fibers, antifreezes, coolants, aircraft anti-icer and deicers and solvents. It is also utilized as raw material for paper industry, polyester Resins, adhesives and inks, chemical Intermediates, Heat Transfer, Fluids. Packing: 220 kg Drum, IBC, ISO Tank, Flexi bag Item Specification Appearance Clear Colourless MEG Content Wt % min: 99.9 DEG Content Wt % min: 0.04 Specific Gravity @20/20 Deg C: 1.1151-1.1156 Water Wt. % max: 0.04 Colour (before heating) Pt-Co Units Max.: 5 Acidity (as acetic acid) Wt.ppm Max.: 10 Chlorides (as CL) Wt.ppm Max.: 0.1 Sulphates Nil Iron Wt.ppm Max.: 0.1 Ash Wt.ppm Max.: 10 Aldehydes (as ormaldehyde) Wt.ppm Max.: 10
Industrial Urea AdBlue Urea is a raw material used in the manufacture of many chemicals, such as various plastics, urea-formaldehyde resins and adhesives. It is also essential for making feedstock, glue, fertilizer, commercial products, and in resin production. Automotive Grade Urea (AGU) is a white, solid, cylindrical pellet. It is manufactured by compressing pure urea crystals in a pelletizing process which avoids the melting and heating of the urea where the majority of biuret is formed. It is an organic amide molecule containing 46% nitrogen in the form of amine groups. Urea is infinitely soluble in water and is a benign and safe chemical to handle. This product contains NO formaldehyde. Packing: 50kg bags, 1000kg / 1200kg jumbo bags. Handling and Storage: Store in a cool and dry place, away from moisture, heat. Protect the materials from the sun or rain during transportation. Items Specification Total Nitrogen (%): 46.4 Moisture (%): 0.7 Biuret (%): 0.75 Alkalinity (%): 0.1 Aldehyde (mg/kg): 10 Insoluble matter (mg/kg): 25 PO4 (mg/kg): 1.0 Ca (mg/kg): 1.0 Fe (mg/kg): 1.0 Cu (mg/kg): 0.5 Zn (mg/kg): 0.5 Ni (mg/kg): 0.5 Cr (mg/kg): 0.5 Mg (mg/kg): 1.0 Na (mg/kg): 1.0 K (mg/kg): 1.0 Al (mg/kg): 1.0 Appearance: Granular or crystalline No mechanical impurities
Melamine is an organic compound that is often combined with formaldehyde to produce melamine resin, a synthetic polymer that is fire resistant and heat tolerant. Resin is a versatile material that has a highly stable structure. Melamine can be easily molded while warm but will set into a fixed form, which makes it suitable for certain industrial applications. This compound is considered safe for its normal uses, but food products that are contaminated with it can be unsafe for consumption. Application: Melamine is mainly used for high-pressure decorative laminates such as Formica, melamine dinnerware, kitchen worktops, furniture, laminate flooring, adhesives for board materials such as particle board (chipboard), MDF (medium-density fibreboard) and plywood, oriented strand board (OSB) and laminated veneer timber (LVT). Packing: 25kg bags, 50kg bags, 1000kg jumbo bags. Item Specification Appearance: Fine, white crystalline powder Melamine, % by weight: 99.8 min Ash, % by weight: 0.01 max Moisture, % by weight: 0.1 max Screen analysis % on 40 mesh % thru 325 mesh: 1.0 max 35.0 max Color, APHA: 15 max
Toluene is also known as toluol. It is a colorless clear aromatic hydrocarbon with the formula C7H8, it is also referred to by the name methyl benzene. Toluene occurs naturally at low levels in crude oil and is a byproduct in the production of gasoline by a catalytic reformer or ethylene cracker. It is also a byproduct of the production of coke from coal. Toluene is used across several industries for various applications. It is predominantly used as an appreciable solvent. Application: As a solvent, toluene can be used in paints, paint thinners, adhesives, inks, resins, cleaning agents, leather tanners and inks. It can also be used to manufacture polymers that produce nylon, plastic soda bottles and for pharmaceuticals, dyes and cosmetic products. Toluene is also used as a coolant in sodium cold traps underneath nuclear reactor loops. Packing: 220 kg Drum, IBC, ISO Tank, Flexi bag. Item Specification Purity (GC): 99.9 % Identity (IR): conforms Evaporation residue: 2.0 mg/l Water: 0.05 % Acidity: 0.0002 meq/g Alkalinity: 0.0006 meq/g Transmission (at 300nm): 70 % Transmission (at 310nm): 80 % Transmission (from 350nm): 98 %
Gypsum powder is a superior construction material due to its ability to create an extremely comfortable and aesthetic ambience. It is a natural material, completely odourless, and is easily available in nature. Gypsum is a material that possesses a natural mechanism to perfectly balance indoor climate and humidity. There are a lot of exceptional features of gypsum products that make them perfect for indoor finishing. Gypsum products are environment-friendly and fire-resistant. We offer thermal as well as acoustic insulation. Application: Gypsum panel or building plasters, mould or statutes, grout of marble, clay and ceiling tiles, color additive and also act as an additive to other products. Packing: 25kg, 50kg and 1000kg jumbo bag. Item Specification Color White Initial Setting Time: Minutes 8- 12 Final Setting Time: Minutes 13 -18 Water Stucco Ratio %: 70 - 75 Compressive Strength: N/mm2 15 - 17 Flexural Strength N/mm2: 5 - 6 Fineness %: 200 mesh Sieve pass > 96 CASO4H2O %: > 97 Sodium Chloride %:
Soda ash light is very well suited for detergent and chemical applications. Sodium carbonate (Na2CO3) is widely used as an alkaline support and for pH regulation. It is also commonly used as a source of sodium and for water softening applications. Usage: Paper-manufacturing, textile, dyeing, synthetic detergent, soap, tiles, ceramics and glazes. Packing: 50kg bags, 1250kg jumbo bags. Items Specification Sodium Carbonate (Na2Co3) %: Min 99.2 Chloride in terms of (NACL) %: Max 0.4 Iron (Fe+2) %: Max 0.002 Insoluble in water %: Max 0.1 Bulk Density, gr/cm3: 0.55- 0.65 Na2o %: Max 58 Particle Size 180UM Sieve Remaining: 70% Min
Titanium dioxide, also known as Titanium (IV) or Titania, is a simple inorganic compound produced as a pure white powder with the molecular formula TiO2. Generally, it is available in two main crystal forms, which are rutile and anatase. Anatase is economical, easily dispersed in water-based systems, and a perfect opacifier. Untreated titanium dioxide (anatase) has TiO2 with a refractive index of 2.55. However, it is not commonly used in exterior (weather-exposed) paint applications except for highway paints. Application: Paint and Coating Industry, Paper Industry, Cosmetics Industry, Food Industry, Plastic Industry etc. Packing: 25 kg PP Bags
We bring forth a cost-effective and qualitative range of Pinewood logs that are used in a variety of applications such as industrial packaging, scaffolding and as lumber beams, etc. These are available in standard and customized sizes as per the needs and can be supplied as heat treated. Pine belongs to the Pinaceae botanical family and has over 100 different varieties, most of which can be found north of the equator. Depending upon location, pine tree can grow a maximum height of 40 m and different varieties may develop different properties. Applications: - Building and construction - Interior furnishing, furniture - Manufacture of composite wood materials - Wood and paper pulp - Masts and poles - Windows, facade panelling
This wood belongs to the shorea, which is a type of hardwood. It is most often employed in the making of furniture such as a bed, sofa, and also in flooring and roofing applications. Owing to its lightweight and light pink to light brown color variants, this wood is preferred for the interior designing. For this reason, we are facing a huge demand for the product. Meranti is a medium density hardwood. The timber glues with common adhesives, nails easily and stains well allowing ready finished in a variety of interal and external above ground applications. Color: Heartwood varies from pale pink to dark red, or from white to straw to yellow. Sapwood cannot be reliably identified by colour difference Origin: A tropical rainforest species found throughout South-East Asia and the islands of the South West Pacific region including the Philippines, Indonesia and east Malaysia. Application: Plywood, interior furniture, general construction, concrete forms, veneer, and boatbuilding. Item Specification Tree Size: 100-130 ft (30-40 m) tall, 3-5 ft (1-1.5 m) trunk diameter Average Dried Weight: 40.9 lbs/ft3 (655 kg/m3) Specific Gravity (Basic, 12% MC): 0.55, 0.66 Janka Hardness: 1,070 lbf (4,740 N) Modulus of Rupture: 14,080 lbf/in2 (97.1 MPa) Elastic Modulus: 1,781,000 lbf/in2 (12.28 GPa) Crushing Strength: 7,940 lbf/in2 (54.8 MPa) Shrinkage: Radial: 2.6%, Tangential: 5.3%, Volumetric: 7.2%, T/R Ratio: 2
Sulphur Lump is excessively required for a variety of applications in numerous industries such as Chemical industry. This form of the element has many applications. It is a vital component in dyes, fungicides and production of agrichemicals. It is also required in mineral extraction and wastewater processing. Powdered sulphur is found in lotions and skin cream ingredients. Burned sulphur helps preserve fruits and bleach paper. The element is part of many creams, lotions, and bar soaps. Many of the skin treatment ointment products in the market have this ingredient. Packing: 1000kg / 1200kg jumbo bags, Bulk. Handling and Storage: Store in a cool and dry place, away from moisture, heat. Protect the materials from the sun or rain during transportation. Item Specification Appearance: Lump Free Sulphur (Dry basis) wt %: Min 99.5 Inorganic Ash wt %: Max 0.03 Carbon wt %: Max 0.05 Moisture wt %: Max 0.5 Colour: Bright Yellow Commercially Free from Arsenic, Selenium & Tellurium.
This form of the element has many applications. It is a vital component in dyes, fungicides and production of agrichemicals. It is also required in mineral extraction and wastewater processing. Powdered sulphur is found in lotions and skin cream ingredients. Burned sulphur helps preserve fruits and bleach paper. The element is part of many creams, lotions, and bar soaps. Many of the skin treatment ointment products in the market have this ingredient. Packing: 25kg bags, 50kg bags, 1000kg / 1200kg jumbo bags. Handling and Storage: Store in a cool and dry place, away from moisture, heat. Protect the materials from the sun or rain during transportation. Item Specification Appearance : Powder Free Sulphur (Dry basis) wt %: Min 99.5 Inorganic Ash wt %: Max 0.03 Carbon wt %: Max 0.05 Moisture wt %: Max 0.5 Colour: Bright Yellow Commercially Free from Arsenic, Selenium & Tellurium.
Paraffin wax is a translucent soft solid commonly referred to as wax. It is extracted from petroleum and burns readily. Paraffin Wax is used for several purposes. Paraffin wax is a white or colorless soft solid derivable from petroleum, coal or oil shale, that consists of a mixture of hydrocarbon molecules containing between twenty and forty carbon atoms. These waxes are categorized by oil content and the degree of refinement. Application: Candle manufacture, wax paper, polishes, cosmetics, electrical insulation assist in extracting perfume from flowers, medical ointment, Pharmacy, Batteries, Paint and varnish removers, waterproof coat for wood, match industry, Corrosion inhibitor, food and chocolate polishing, PVC lubricant. some factories mix paraffin wax 3-5% with 1-1.5% to receive a better quality. Packing: 25kg Carton Box Item Specification Melting Point: 58 -64C Oil Content: 1%- 5% Colour: Off White Flash point: 250 C
Quicklime (or calcium oxide or burnt lime) is obtained by calcining pure limestone at temperature above 9000C. This highly reactive product is essential to many industrial processes. Calcium oxide (CaO), commonly known as quicklime or burnt lime, is a widely used chemical compound. It is a white, caustic, alkaline, crystalline solid at room temperature. The broadly used term lime connotes calcium-containing inorganic materials, in which carbonates, oxides and hydroxides of calcium, silicon, magnesium, aluminium, and iron predominate. Application: Steel Making, FGD, Construction, Masonry & Mortars, Water Treatment, Chemical Processes, Mining Industry, sugar industry, Paper, Pulp and PCC, Remediation of Sludges and Wastes and Glass Manufacturing. Packing: 1000kg Jumbo bag. Item Specification CaO: 92.5% ± 2 Loss on Ignition at 1000 °C: 4% ±2 Grain Size: 10- 60 mm Reactivity: High
Nomad Backpack NOMAD, Have you ever felt dissimilar on the weekend and at work. This bag adapts to your mood with two different looks formal and casual. There is no other reversible bag beside the NOMAD. TRACKS TO SUIT- A top-notch quality Water Resistant(WR) reverse poly side gives a classic leather look for the office days and a sporty jacquard self-design side when you're out on the weekends. This adaptable bag is perfect for any mood or occasion. It's stylish and functional and always looks great. DESIGN INSIDE * Double-sided bag for office & evening/Weekend look. * One side has a Separate heavy 3-side padded Suede Brush Lining for the laptop section that holds * devices up to 14inches & a dedicated Tab section and these compartments are shock-proof. * Adjustable shoulder straps with sternum strap, so that to ensure they do not slide off the shoulder at any point. * Premium reverse Water Resistance(WR) zippers and buckles. * Two large volume pockets for water Bottle/Umbrella. * Both side has a large zippered top Quick excess pocket. * One side RFID-protected pocket for Card/Wallet that keeps your information secure from scammers. * USB (universal serial bus) charging port. * Chest and bottom compression straps for the stability of the back and to reduce stress on the shoulder, neck & back. * Reflective tapes used at strategically thought points for visibility at night. * Polyester Thread heavy stitching, with Bar-Tack stitching at all important touch points. * Strap Quality: Polyester Webbing. * Both sides Quick excess Pocket on the side for small essentials. * Capacity: 20 Litres * Size L33 x H47 x W13.5 cms * Weight :920gms
Sulphur Pastilles are hemispherical shaped granules formed from pure molten sulphur using a drop-forming process. Granulation or pastillation as a method for producing bulk solid sulphur is often found in facilities where raw elemental sulphur is processed into a final or intermediate product, or in facilities (such as oil refineries) where Sulphur is being recovered as a by-product from another production process. Sulphur pastilles are used in the production of sulfuric acid, phosphate fertilizers, plant protection products as well as in the steel, paper and food industries. Packing: 25kg bags, 50kg bags, 1000kg / 1200kg jumbo bags, and customer's marking bags. Handling and Storage: Store in a cool and dry place, away from moisture, heat. Protect the materials from the sun or rain during transportation. Item Specification Appearance: Pastille Free Sulphur (Dry basis) wt %: Min 99.5 Inorganic Ash wt %: Max 0.15 Carbon wt %: Max 0.05 Moisture wt %: Max 0.5 Colour: Bright Yellow Commercially Free from Arsenic, Selenium & Tellurium.
Linear Alkylbenzene (LAB) is a raw material of an important anionic surfactant, Alkyl Benzene Sulfonate, widely used in daily chemical washing, textile auxiliaries, industrial cleaning, printing and dyeing, electroplating, leather and paper industry etc. LAB can also be used in lubricating oil, capacitor oil, part of the solvent etc. Application: LABs are used to produce linear alkylbenzene sulfonate (LAS) which is a biodegradable surfactant & has great cleaning properties and as such, it is an important component of detergents and cleaning solutions. Packing: Standard export neutral packing in Tanker, Bulk chemical carrier, Flexibag etc. Item Specification Appearance (visual): Clear & Bright Specify Gravity (15.5/15.5 °C): 0.85- 0.88 Bromine Index (Br2.mg/100g): 15 max Saybolt Color: +30 min Refractive Index (20 °C): 1.480- 1.485 Water Content (wt.ppm): 200 max Dialkyltetralin (wt.%): 1 max Paraffin Content (wt.%): 0.4 max Monoalkylbenzene Content (wt.%): 98.6 min C9 & lighter: 1 max C10: 6- 16 C11: 28- 39 C12: 25 - 40 C13: 10 - 30 C14 & heavier: 2 max Average Moleculer Weight: 238 - 250 2-phenyl isomer (wt.%): 15 min
Eltee DMCC is the top leading suppliers of Soda Ash Dense in the world. We supply Soda Ash Dense to all the major galss manufacturers of the world. Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material. Properties of Soda Ash Dense : * Chemical Formula: Na2CO3 * Molecular Weight : 105.99 * Absolute Density, g/cm3@25 degree C : 2.533 * Melting Point , degree centigrade: 851 * Solubility, max % @35.4 degree centigrade: 33.2 * pH of 1% solution @25 degree centigrade: 11.34 Physical Properties: * Sodium Carbonate (Na2Co3)% : 99.5% Min * Bulk Density : Ib./ft3 : 62.4 - 68.6 * GPL : 1000 - 1100 Chemical Properties: * NaCl Weight % : 0.04% Max * Si02% : 0.03 Max * Organic Matter as C% : 0.01% Max Product Usage : * Glass Industries * Chemical Intermediates * Soap and Detergent formulations * Water Treatment * Flue Gas Desulfurization * Pulp and paper