UAE Self Adhesive Paper Suppliers and Manufacturers

What is PET Open Agent Film Chips? PET Open Agent Film Chips are plastic chips made of polyethylene terephthalate (PET) that contain an open agent, which helps to improve the adhesion of inks and coatings to the surface of the film. It is uniformly depressed anti-adhesive, with excellent film-forming properties; polymerization of continuous device production makes the quality high and stable. As an opening agent to be used with film grade base materials to produce various types of films. It can be used in films with special requirement for optical and surface properties or ultra-films below 8u. Can be used directly in foodstuffs after FDA approval.

Advantages: It is uniformly depressed anti-adhesive, with excellent film-forming properties; Polymerization of continuous device production makes the quality high and stable. Application: It can be used in films with special requirements for optical and surface properties or ultra- films below 81/4m (micrometer ). It can be used directly in the food packing materials after FDA approval.

The main raw material of PTA and MEG is added with modifiers of third monomer and fourth monomer, etc., then subjected to copolymerization reaction to make modified polyester pellet with melting point at 100'C - 225C. Functional characteristics low melting point, good spinnability and excellent fiber adhesion effect Application scope manufacturing bi-component core-sheath fiber and filament yarns, etc. Specification - LOW MELTING PET CHIPS TRB FIBER GRADE 110-225.

Bleached Softwood Pulp is commonly used in the production of most paper, paperboard and tissue products. Softwood pulp brings strength to the end product, as well as runnability and excellent dewatering properties to the production process.

This type Chips that is designed to resist burning and melting at low temperatures. Low Melting Point Polyester Chip for Hot Melt Yarn Masterbatch Extrusion Grade Polymer for Hot-melt Adhesive Glue Coating Description: Generally speaking, the low melting point polyester chip refers to one specialty polymer with a melting point between 90 and 220. The melting point of polyester is the temperature at which a solid crystalline substance changes from a solid state to a liquid. So it reflects the purity of polyester. Generally speaking, pure polyester is a partially crystalline polymer with a melting point of 265. But during actual production, some impurities exist in the polyester due to various side reactions. At the same time, the defects of polymer crystals and the difference in crystallinity will also affect the melting point. The common type of low melt polymer is 110. But we can also offer a melting point of 90, 120, 160, and 180. Application: Low-melt polyester chips can produce low-melting point fiber, low-melting point synthetic fiber, and thermal-melting mucilage. Its primary usage is acting as bonding fiber in nonwoven fabrics. The end usage lies in clothing, articles for bed, shoe uppers, sleeping bags, sofas, and hygiene products. LM PET Chip is also the main raw material of masterbatch carriers. That is, low-melt PET chips, conventional chips, and dyes are mixed to produce the polyester color masterbatch according to a certain proportion. The production of this product is the introduction of polyester macromolecules into the modified copolymer unit. And its melting point is in the range of 100-120. Commonly used modifiers are phthalic acid, adipic acid, and trimethylolpropane. Recently, LM Polymer is also extruded into the back coating of nonwoven, automotive interiors, foam, injection molding, PET sheets, and hot-melt adhesive/glue. Low Melt Yarn is also called hot melt yarn or fusible yarn. There are sheath-core low-melt bicomponent yarn and full low-melt polyester yarn.

Sodium chlorate is an inorganic compound with the chemical formula NaClO3. It is a white crystalline powder that is readily soluble in water. It is hygroscopic. It decomposes above 300 C to release oxygen and leaves sodium chloride. Several hundred million tons are produced annually, mainly for applications in bleaching pulp to produce high brightness paper. The main commercial use for sodium chlorate is for making chlorine dioxide (ClO2). The largest application of ClO2, which accounts for about 95% of the use of chlorate, is in bleaching of pulp. All other, less important chlorates are derived from sodium chlorate, usually by salt metathesis with the corresponding chloride. All perchlorate compounds are produced industrially by the oxidation of solutions of sodium chlorate by electrolysis.

New-type hot-connectivity composite fiber is made from different types of modified high molecular materials through advanced composite spining technology. It has unique characteristic of melting at low temperature, and after hot treatment, it can naturally adhere without use of binder, green and environmental. The product abides by strict sanitation control standards to achieve sanitation material grade. The products include ES fiber and ETS modified polyester composite staple fiber which is initiated by the company, and can be applied to production of surface layer and guide layer of disposable sanitary articles Functional characteristic the product is a kind of chemical blend provided with advantages of the two materials. ES fiber has low melting point on the superficial layer, soft, bouffant and pervious, while the core layer has certain intensity and fiber state. ETS fiber is provided with advantages of heat bonding, high hygroscopicity and antistatic property, etc. Application scope the sanitary products are applicable to hot air penetrating technology to produce surface layer and guide layer of disposable sanitary materials such as paper diaper and sanitary towel; the conventional low-melting fiber is applicable to production of hard cotton, decorative wall board, environmental mattress, seat mat, environmental filter media, constructional acoustic damping and heat insulation materials, etc. Specification 4D*51MMã??4D*32MM

Urea Formaldehyde Concentrate (UFC 65) is a clear and viscous liquid, composed of formaldehyde, urea and water. It provides high concentration of formaldehyde commercially available in an easy-to-use form. Applications It is used in production of aminoplast resins such as urea formaldehyde adhesives, UF and MUF impregnation resins. It is used as anti-caking agent in the process of urea production.

Urea formaldehyde is a type of thermosetting resin that is produced by the reaction of urea and formaldehyde. This resin is commonly used in the production of adhesives, particularly for wood products such as particleboard, medium-density fiberboard (MDF), and plywood. The resin provides excellent bonding properties and is valued for its water resistance and durability. Urea Formaldehyde Concentrate (UFC 85) is a clear and viscous liquid, composed of formaldehyde, urea and water. It provides high concentration of formaldehyde commercially available in an easy-to-use form.

AL Sadek Group of Companies carries widest range of Grain Specially Wheat like Milling Wheat, Durum Wheat and Many More. We are one of the top Wheat Suppliers and Exporters in UAE. Different Types of Wheat: * Soft red winter wheat: This type of wheat has baking properties which make it suitable as an ingredient in baked goods like cakes, pastries and cookies. * Hard red winter wheat: This type of wheat is grown in low temperatures and snow-covered regions. It has high protein content and is used for products like general purpose flour, flatbreads and cereals. Itâ??s also the most important type of wheat produced in the United States. * Hard red spring wheat: This type of wheat is produced in hot, dry climates. Itâ??s gluten characteristics make it a good choice for use in food products like bagels, croissants and pizza crusts. * Soft white wheat: Sweeter and softer than other types of wheat. Itâ??s low in protein and gluten which makes it great for more exquisite pastries and cakes, as well as Asian noodles * Hard white wheat: This type of wheat has slightly less protein and is less bitter than hard red wheat. Itâ??s used in softer loaves such as pan loaves. * Durum wheat: This type of wheat has more protein than any other type and is used to make pasta. Uses of Wheat: 1. Animal feed: A portion of wheat production is allocated for animal feed, particularly for poultry and livestock. Wheat middling's, a byproduct of flour milling, are commonly used in animal feed due to their high protein content. 2. Biofuel: Wheat can be used to produce ethanol, a biofuel that can replace or supplement gasoline. In 2020, around 5% of global wheat production was dedicated to ethanol production. 3. Bioplastics: Wheat straw and chaff can be used as a raw material to create biodegradable plastics. These bioplastics offer an environmentally friendly alternative to traditional petroleum-based plastics. 4. Paper production: Wheat straw can be used in paper production as an alternative to wood pulp. This helps reduce deforestation and contributes to more sustainable paper production. 5. Construction materials: Wheat straw can be processed into building materials like straw bale and particleboard. These materials offer insulation, soundproofing, and environmental benefits compared to conventional construction materials. 6. Industrial absorbents: Wheat straw and chaff can be used as absorbent materials for oil spills and other industrial applications. They provide a natural and cost-effective alternative to synthetic absorbents.

Attachment less than 1%. Possible to find straws in the can. Deodorant cans can be present but are made of aluminium. Bales: 45-47cm Weight of 1 bale: 50-55 kgs Loading: 25 MT/ container