What is PET Open Agent Film Chips? PET Open Agent Film Chips are plastic chips made of polyethylene terephthalate (PET) that contain an open agent, which helps to improve the adhesion of inks and coatings to the surface of the film. It is uniformly depressed anti-adhesive, with excellent film-forming properties; polymerization of continuous device production makes the quality high and stable. As an opening agent to be used with film grade base materials to produce various types of films. It can be used in films with special requirement for optical and surface properties or ultra-films below 8u. Can be used directly in foodstuffs after FDA approval.
Flame Retardant Resistant Aramid Staple Fiber, Kevlar Staple Fiber, Aramid Thread or Staple Fiber
What is PET Open Agent Film Chips? PET Open Agent Film Chips are plastic chips made of polyethylene terephthalate (PET) that contain an open agent, which helps to improve the adhesion of inks and coatings to the surface of the film. It is uniformly depressed anti-adhesive, with excellent film-forming properties; polymerization of continuous device production makes the quality high and stable. As an opening agent to be used with film grade base materials to produce various types of films. It can be used in films with special requirement for optical and surface properties or ultra-films below 8u. Can be used directly in foodstuffs after FDA approval.
Sodium chlorate is an inorganic compound with the chemical formula NaClO3. It is a white crystalline powder that is readily soluble in water. It is hygroscopic. It decomposes above 300 C to release oxygen and leaves sodium chloride. Several hundred million tons are produced annually, mainly for applications in bleaching pulp to produce high brightness paper. The main commercial use for sodium chlorate is for making chlorine dioxide (ClO2). The largest application of ClO2, which accounts for about 95% of the use of chlorate, is in bleaching of pulp. All other, less important chlorates are derived from sodium chlorate, usually by salt metathesis with the corresponding chloride. All perchlorate compounds are produced industrially by the oxidation of solutions of sodium chlorate by electrolysis.
Fibre Fill Polyester Filling Microfiber Fiber 0.9d Down Like Virgin Micro Gel Fiber Hot Sale Virgin Down Like Polyester Fiber filling fiber hollow conjugated fibers recycled polyester stuffing fiber 1) Denier:0.8D-1.5D 2) Cut length:22MM/25MM/32MM/38MM/51MM/64MM/71MM/76MM 3) Luster:raw white Virgin and recycled grade 4) Siliconized and no siliconized 5) Merits: high intension, stable stretch elongation, highly elastic, puffed, high ratio of hollowness 6)Excellent fluffy performance, pleasing hand feeling, plump, gentle, luster 7) Usage: suitable for filling toys, pillows, cushions, and other products need to be filled ; make pearl cotton. bedclothes , man-made fur, filler materials, sofa and others 8) Weight: around 300kgs/bale 9) Package: woven bag Container load: around 34 bales for a 20GP,around80 balesfor a 40HQ 10) Delivery Time: within 15 days after receiving the deposit
3mm 6mm 100% Virgin New PP Material Staple Monofilament Polypropylene Fiber 0086-13915721168 Product number: PP Micro fiber Equivalent diameter: 15-48 um Elastic Modulus: â?¥3500 M�·pa Breaking strength: â?¥ 560 M�·Pa melting point: 160-180�°C proportion: 0.91-0.93 g/cm�³ length: 3-20mm (as custom requirement) Acid and alkali resistance (strong retention rate) â?¥96% 1. PP pressed Woven Bag 2. 300-350kg/ bale 3. About 9-10Tons / 20'FCL 4. About 21-22Tons / 40'FCL
Specification: 3-110D * cutting length 5~102mm, color can be according to customer`s requirement. Our products can be used in non-woven, automotive interiors, geo-textiles, speaker cloth and needle carpet, spinning wool, filters, adsorption materials. Our fiber also can be added flame retardant, anti-UV, anti-aging properties according to the customer's requirement.
Making wadding and padding materials 7D*64mm HC non silicon polyester staple fiber white color 054310599 Our siliconized fiber mainly can be used in home textile, such as filling sofa, pillow, cushion and winter clothing and non siliconized mainly can be used in non woven fabrics, such as padding, mattress and wadding.
Regenerated 1.4D 1.5D 3D 6D 7D 15D Black Polyester Staple Fiber for Nonwoven Carpet -Textile yarns.the end products are clothing, home textiles, decorative cloth, etc. -Nonwoven. the end products are wet wipes, masks, etc. -Filling.the end products are winter clothes, pillows, toys,etc.
ES fiber is a sheath-core composite fiber obtained by successfully combining low-melting components and high-melting components on a single fiber. It has excellent thermal bonding properties. The low melting point component in ES fiber melts under heat treatment conditions higher than its melting point, and bond with other materials to form a binder-free environmentally and friendly non-woven fabric. ES fiber has various advantages such as soft, fluffy, low-temperature processing, heat-bonding, plasticity, non-toxic, non-irritating, and lightweight. It is mainly used to manufacture high-quality sanitary products such as sanitary napkins and diapers. And it is also high-quality materials used to make medical products such as medical protective cloth and medical protective masks, and so on. There are two main types of ES fibers. The first kind is a composite of PE and PP. Its sheath layer is PE (polyethylene, melting point 130�°C), and its core layer is PP (polypropylene, melting point 165�°C). The second kind is a composite of PE and PE. Its sheath layer is PE, and the core layer is PET (polyester, melting point 255â??), which is an upgraded version of PE/PP. ES is divided into EP and ET in terms of material and functionally divided into the hydrophilic, water-repellent, hydrophilic, and weak parent, single parent, multi-parent.In addition, it also can be divided into whitening, general whitening, high holding, medium holding, and low holding. The specifications are 1.5D38mm, 2D38mm, 4D51mm, and so on. In the future, the trend will gradually develop towards fine deniers. SPECIFICATION: PE+PET ES Fiber: Optical White & Super Hydrophile 2D*38mm, Optical White & Hydrophile 2D*38mmï¼? Optical White & Water Repellency 2D*38mmï¼? RAW White & Water Repellency 2D*38mmï¼? Optical White & Super Hydrophile 1.5D*38mmï¼? Optical White & Water Repellency 1.5D*38mmï¼? RAW White & Water Repellency 1.5D*38mï¼? Hydrophile 2D*38mmï¼? Water Repellency 2D*38mm PE+PP ES Fiber: Hydrophile (P2Q) 2D*38mm
Bleached Softwood Pulp is commonly used in the production of most paper, paperboard and tissue products. Softwood pulp brings strength to the end product, as well as runnability and excellent dewatering properties to the production process.
Advantages: It is uniformly depressed anti-adhesive, with excellent film-forming properties; Polymerization of continuous device production makes the quality high and stable. Application: It can be used in films with special requirements for optical and surface properties or ultra- films below 81/4m (micrometer ). It can be used directly in the food packing materials after FDA approval.
For the production of thin film and solar cell encapsulation substrates with high strength requirement The solar polyester film can protect the solar panel.
Spodumene, lithium ore, lithium concentrate content Li2O 5-8% or more Long-term supply of spodumene ore and lithium concentrate, with different contents of 5%, 6%, and 7% or more can be supplied. It can supply about 1000-2000 tons per month. Interested ceramic glass factories or traders are welcome to contact us. Li2O: 6.00%, Al2O3: 25.56%, SiO2: 63.72%, Fe2O3: 0.26% CaO: 0.17%
Lead, Zinc Ore from Nigeria
New-type hot-connectivity composite fiber is made from different types of modified high molecular materials through advanced composite spining technology. It has unique characteristic of melting at low temperature, and after hot treatment, it can naturally adhere without use of binder, green and environmental. The product abides by strict sanitation control standards to achieve sanitation material grade. The products include ES fiber and ETS modified polyester composite staple fiber which is initiated by the company, and can be applied to production of surface layer and guide layer of disposable sanitary articles Functional characteristic the product is a kind of chemical blend provided with advantages of the two materials. ES fiber has low melting point on the superficial layer, soft, bouffant and pervious, while the core layer has certain intensity and fiber state. ETS fiber is provided with advantages of heat bonding, high hygroscopicity and antistatic property, etc. Application scope the sanitary products are applicable to hot air penetrating technology to produce surface layer and guide layer of disposable sanitary materials such as paper diaper and sanitary towel; the conventional low-melting fiber is applicable to production of hard cotton, decorative wall board, environmental mattress, seat mat, environmental filter media, constructional acoustic damping and heat insulation materials, etc. Specification 4D*51MMã??4D*32MM
WE ARE SUPPLYING FROM INDIA AND FAR EAST
Polyester yarn, fdy, dty spun.Cif and fob service
The most expensive and rare trim of Saffron. Super Negin saffron is known not only for being the most potent but also for its aesthetically pleasing features. Super Negin filaments are longer in length, thicker, wider and contain no yellow or orange threads. It is pure and contains stigma without the style and is the most expensive Saffron in the world. Super Negin saffron has no style & pollen and just consists of deep red filaments of stigma with highest strength of coloring, flavor and aroma. When comparing all the trims of Saffron, Super Negin is the most sought after for those who want the best of the best.
The price of pushal is cheaper than other types of saffron, ie Super Negin Saffron and Negin Saffron because Pushal Saffron contains stigma along with a part of style (yellow part) The Pushal filaments are lighter and thinner and in order to dry the pushal, it is done in such a way that the red saffron strands have the largest volume. In this case, the saffron strands swell and twist and coil inside. As a result, they look more voluminous and beautiful. Comparing to the above two saffron, pushal is the lower grade. It has more yellow parts compared to the negin saffron. The pure saffron concentration will be less compared to the Super Nagin & Nagin.
