Product Description Disk bale plucker is suitable for the plucking of all classes of raw cotton, cotton chemical fiber and middle-long fiber shorter than 76mm. It's the first procedure of the machine and consists of pulley, central axis, expansion tube and ground rail, etc., and this model can be used in double. For a large number of raw material varieties with great differences, this model helps improve the number of mixed bale and reduces the mixing units & working quality. Disk plucker is an important machine in blowing-carding line. It is applicable for kinds of raw cotton. Cotton content chemical fiber, middle and long chemical fiber, generally two set of plucker are put into production in parallel. Plucking beater go down interval and rotate with carriage to pluck cotton sequence. Cotton plucked is transported to the next machine via duct. Disk plucker adopts a saw-toothed beaters ,which are divided into 3 groups,and fixed from inside. From inside to outside according to the tooth setting from thin to thick so as to get fibers minor and uniform,thus itâ??s advantageous to the blending and cleaning of next process. â?? Technical Specifications Production (kg/h): 800 - 1000 kg Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets) Outer Wall Diameter in mm: 4760 mm Inner Wall Diameter in mm: 1300 mm Speed of Carriage in r/min: 1.6 - 2.2 r/min Beater Rotating Speed in r/min: 740 r/min Knife out of Rib / Blade extension from grid in mm: 2.5 - 7.5 mm Crab Slewing Speed in r/min: 0.59 - 2.96 r/min Ground Rail External Diameter in mm: 5192 mm Total Height in mm: 4155 mm General Power in Kw: 4.17 Kw Net weight in Kg: Around 1600 Kg â??
Product Description Unique patented three-roller stripping cotton; Increase in the gill plate carding roller; After the first three additional two fixed cover; Brake fast-Astoria; Used Step-pressure roll; Use of Adolf timing belt drive; About closed-end security cover; Quality of the MCC. Technical Specifications Scope of application: Apply to the local cotton and chemical fiber spinning pure or blended with roll feeding. Quantitative production: 3.5 ~ 6.5 g / m Production: 35 kg / h Working width: 1000 mm Additional pieces of comb: Roller carding a board Cover fixed after 2 Cover fixed before the Drawing a multiple of total: 67 ~ 120 Spurs roll diameter of the work: �¦250 mm Barbed roller speed of the work: Cotton: 1070 to / Fiber: 980 / Work of the cylinder diameter: �¦1289 mm Cylinder speed of the work: Cotton: 360 / Fiber: 330 / Work of Adolf diameter: 706 mm Speed of the work of Adolf: 21.3 ~ 38.2 to /
Product Description Unique patented three-roller stripping cotton; Increase in the gill plate carding roller; After the first three additional two fixed cover; Brake fast-Astoria; Used Step-pressure roll; Use of Adolf timing belt drive; About closed-end security cover; Quality of the MCC. Technical Specifications Scope of application: Apply to the local cotton and chemical fiber spinning pure or blended with roll feeding. Quantitative production: 3.5 ~ 6.5 g / m Production: 35 kg / h Working width: 1000 mm Additional pieces of comb: Roller carding a board Cover fixed after 2 Cover fixed before the Drawing a multiple of total: 67 ~ 120 Spurs roll diameter of the work: �¦250 mm Barbed roller speed of the work: Cotton: 1070 to / Fiber: 980 / Work of the cylinder diameter: �¦1289 mm Cylinder speed of the work: Cotton: 360 / Fiber: 330 / Work of Adolf diameter: 706 mm Speed of the work of Adolf: 21.3 ~ 38.2 to
Product Description Waste Recycling Machine adopts a leading technology. It superfine new tearing machine for textile waste which are with porcupine roller with diameter 600 -1000 mm each cylinder with difference angle and specifications taper-pins. The feeding rail adopts elastic rubberised roller with diameter 150 - 250 mm. The working width from 1000-2000 mm and the maximum capacity up to 2500kg per hour. Technical Specifications Machine TMI 60.17.1.2000416a Processing Capacity (kg/h): 160~180 Drum Diameter (mm): 250 Drum Weight (Kg/Drum): 420 Working Width (mm): 1000 Installed Power (Kg/h): 5.5*N Outside Dimension (LxWxH) (mm): 10200x1800x1400 Machine TMI 60.17.1.2000416b Processing Capacity (kg/h): 220 ~ 280 Drum Diameter (mm): 400 Drum Weight (Kg/Drum): 640 Working Width (mm): 1000 Installed Power (Kg/h): 7.5*N Outside Dimension (LxWxH) (mm): 11600x1800x1400 Machine TMI 60.17.1.2000416c Processing Capacity (kg/h): 300 - 350 Drum Diameter (mm): 600 Drum Weight (Kg/Drum): 600 Working Width (mm): 1000 Installed Power (Kg/h): 22+15*(N-1) Outside Dimension (LxWxH) (mm): 14400x1800x1450 Machine TMI 60.17.1.2000416d Processing Capacity (kg/h): 450 - 550 Drum Diameter (mm): 600 Drum Weight (Kg/Drum): 600 Working Width (mm): 1500 Installed Power (Kg/h): 30+18.5*(N-1) Outside Dimension (LxWxH) (mm): 14400x2300x1450
Product Description Automatic Cone winder inherits the advantages of a series winder, adopts brand-new profile design & is featured by beautiful and dignified features. It adopts the brand-new smart anti-pattering device, new type of tension control system and new type of balloon central mechanism to ensure perfect package building, more even winding tension, high machine operation stability and reliability to meet customer requirement. Technical Specifications Machine Type: Single Spindle, Single Sided, LH Machine or RH Machine Application: Single of Cotton, Wool, Man-made staple fiber or their blends, yarn counts from Nm 3.5 to the highest Winding Speed: 400 - 2200 m/min, Step less adjustable No. of Spindles: 12 - 54 Spindles, every 4 spindles one extension Spindle Pitch: 320 mm Package Taper: 3'30", 4'20", 5'57", 9'15" Feeding Packages:
TMI 12.4.200413 Product Description Rotor spinning machine is a kind of new-type open end spinning machine with some features such as high speed, high efficiency, automatic exhausting impurities. It can spin directly various short fibers, 40mm cut fibers or 60mm cut viscose into single fine yarn from combed sliver. This is a double-side-type spinning machine based on modularised design. It applies many new technologies such as air suction spin box, semi-automatic piecing-in, closed loop control etc. Max. rotor speed can reach 110000 rpm. Thanks to application of numerous new technologies, it holds spinning and winding quality close to full automatic rotor spinning machine, and then shows better price-performance ratio. Technical Specifications The minimum and max. tex: 120-150 (5s-36s) Suitable tex: 83.2-28 (7s-21s) Cotton to be fed: 2500-5000 Rotor speed (r/min): 100000 Yarn guiding speed m/min: 40-160 Splitting roll seppd: 5500-9000 Twisting degree: 220-2250 Pneumatic moto purging volume (m3/h): 5500 Suitable fiber length (mm): less than 40 Operating height (mm): 1560 Yarn feeding bobbin: outer dia: 400x914 Head space (mm): 230 Rotor diameter (mm): 400 or 40 Head number: 192 or 240 Bobbin specs (outer diameter*height)(mm): 54x170 Take-up specs (diameter*height): 300*150 Loaded weight (kg): 3 Crossing angle: 300,330,390,420 Yarn breaking (Filament per 1000 filament per hour): less than =50 Purification efficiency: 60-80 Pressure in rotor intra cavity: greater than = 5 Mechanical stretching times: 32-220 Tension stretching times: 0.93-1.06 Total power: 64kw
TMI 13.1.200415 Product Description Rotor Frame machine is a three-shaft driven computerized type high speed suspend flyer roving frames that adopt the advanced computer numerical control technique, without cone drum structure, mechanical forming and direction transposition structures of former flyer frames. It's more simple and more reliable than former roving frames, all operations are controlled by inverter and PLC. Technical Specifications Suitable for square fiber length:60-200mm Drawing multiple :4-16 Viscosity range:10-40twist/m The scope of Article :0.3-1g/m Feeding range:5-15g/m Constant speed:the maximum mechanical speed 1200RPM Maximum process speed 900RPM Drafting system : A complete unit Chinese brand drafting system (spring weighting arm). Roller diameter(mm) : 28.5,28.5 Top roller diameter(mm) : 25,28 Drafting range : 4.2-12 Mechanical spindle speed(r/min): 1600 Twist range(twist/m) : 18.0-80 Bobbin dimensions (mm) : 45 445 Take up package dimensions (mm): 152 40
TMI 14.2.200415 Product Description Ring Spinning Frame has the features of high quality yarn, high level of automation, convenient operation and easy management . The option for the number of spindle ranges from 384 to 516 .The machine can be equipped with every kind of drafting system that is available from Chinese or European brands. This model was first entered into the market in 1989 and it is known as one of the most stable and reliable ring spinning frame by customers after modification for 20 years. Technical Specifications Spindle gauge: 70mm Lifting: 205, 180, 155 mm Ring Diameter: 45,42,38mm Number of Spindle: 384,396,408,420,432,444,456,468,480,492,504,516 Yarn count: 97.2---4.9tex (6--12Ne) Twist: 300--1600(T/m) Draft Ratio: 10-50 Spindle speed: 15000-22000 rpm Spindle drive: Single tension pulley,Z or S twist optional Spindle wharves diameter: 22,24,20.5mm Creel: One tier hanger, Four or six rows optional Main Motor (380v50Hz): 15/7KW 17/9KW 18.5/11KW 22/11KW (380v) Suction Motor (380v 59 Hz): 1.5KW (for No.of spindles below4444) 2.2KW (for No.of spindles above 456) Lift Motor: 370W Distance between Spindle from left and right side: 700 mm Headstock dimensions: Width: 640mm, length:680mm, height:1700mm Endstock Dimensions: Width:640mm, length:1300mm,height: 1768mm Total height of the machine: 2300 mm Total length of the machine: L= 2380 + (N/2-1) 70mm L: length N: where means the number of spindles
TMI 1.1.200326iii Product Description The Full automatic textile rubber cots take off machine is newly developed for take off the rubber cots from the roller bearing, It is a new generation of cots take off machine. The Full automatic textile rubber cots take off machine is mainly used in spinning mill to carry out take off the rubber cots from the roller bearing. This machine is a fully automatic machine, which greatly saves labor. It's excellent take off quality helps in improving manufacturing efficiency & saves time and cost of operation. The Full automatic textile rubber cots take off machine has an automatic feeding. It automatically takes off the rubber cots from the roller bearing & the products are of a high precision take off. Technical Specifications Feeder power: 0.35 Kw Production: 300-400 Sets / hour Air pressure: 5 Kg or more Function: fully automatic take off aluminium bushing rubber cots, double layer rubber cots onto the roller bearings.
TMI 1.1.200326i Product Description The Full automatic textile rubber cots grinding machine is new developed for grinding rubber cots, it is a new generation of cots grinding machine. The Full automatic textile rubber cots grinding machine is mainly used in a spinning mill to carry out grinding of rubber cots. This machine is a fully automated machine, which greatly saves labor, provides excellent grinding quality to improve manufacturing efficiency & save the time and cost of operation. The Full automatic textile rubber cots grinding machine has an automatic feeding. The processing of rubber cots is of a high precision grinding & end surface level off is smooth. Technical Specifications Grinding wheel motor power: 2.2 Kw Rotating motor power: 180 W Displacement motor power: 180 W Dust collection fan power: 750 W Feeder power: 0.3 Kw, 220 V Air pressure: 5 kg or more Production: about 300-360 PCS/H
TMI 20.4.200416 Product Description High speed air jet loom is with the rigidity of machine frame and top beam further strengthened. The whole machine is of a desired stability, beating system & is better optimised. Structure is further improved. Beating may be done with four or six-shedding levers. With the six-shedding lever, the warp yarn has longer opening hours, as a result, this high speed air jet loom will be better for weft yarn insertion. Especially suitable for wider fabric weaving, so it extends the weaving scope on our high speed air jet loom Technical Specifications Reed Width: 150 cm, 170 cm, 190 cm, 210 cm, 230 cm, 260 cm, 280 cm, 320 cm, 340 cm, 9000px Drive: New designed motor; Electromagnetic brake; But on control Weft selection: 1,2,4 or 6 colors Weft insertion: The main and auxiliary nozzles are electronically controlled Beating: Solid beating shaft with multiple foot stand, Four crank shedding beating Let-off: Electric let off, 800 mm beam pipe Take-up: Electric take up, Max rolling 600 mm Heald frame: 6-16 Pcs on low price by Tsudakoma tech weaving air jet loom Shedding: crank shedding/positive cam shedding/electronic dobby shedding Air supplying: Centralised air compressor Speed: 500~1000rpm Power: 2.8kw,3.0kw,3.8kw,4.5kw Weft density: 5-60 picks/inch Yarn account: 10-60S Cutting: Mechanical Selvedge: Closed selvedge with tuck-in device Wires: 10000 pieces Dropper: 10000 pieces Reed: 1 piece Back rest: Double back rest,removable back rest seat on the back of high speed air jet loom Electric control box: Touchable screen; Controlled by computer; parameter setting and controlling, auto diagnosis Stopping device: 4 color LED lights, cracked ends: 6 line droppers, broken picks, two weft feeler, Leno edge apparatus, near switch, Capture side of weft yarn, sensor Gears in main box: T tooth with QT700 material Belt: Brand: Chinese, excellent quality, longer life Gear shaft: 45# steel with High frequency quenching process Oil seal: CTY GERMANY Oil nipple: Taiwan Crossbeam: Triangular steel, weaving steadily Lifting: Solid supporting, Thickened pipe,imported bearings Painting: Polishing, sandblasting, baking finish Iron castings: Weight of the high speed air jet loom, iron castings are increased
TMI 21.5.200416 Product Description This can be compared with almost all other advanced version of modern water jet looms ranging from let off system, shedding section, take-up section, drive system and more. It is suitable for super high speed and steady working, excellent performance in weaving high density cloth winder workable range of yarn and fabric. The optional single-pump double nozzle electronic measuring & storage system, two-pump two nozzle electronic measuring& storage system,tappet shedding device, dobby shedding device can be mounted on this Technical Specifications let off/take up: Electronic or mechanical shedding: plain or cam or dobby feeder type: Electronic or mechanical Reed width: 150 cm, 170 cm, 190 cm, 210 cm, 230 cm, 260 cm, 280 cm, 340 cm, 9500 px Filling insertion rate: 2,280m/min max. Head frame: Tappet shedding: 2, 4, 6, 8, 10 12pcs max. â??Dobby shedding: 16pcs max. Power: 2.2kw 3.8kw Weft density: 5~60picks/cm Rotational speed: 1,200rpm max. Brand of pump, plunger, bush, transmission etc are optional.
TMI 135.1.1.200501 - Single Needle Flat Bed Garment Industrial Sewing Lockstitch Machine TMI 1.1.200501 Product Details Needle No: 1 Stitch Length: 0-5mm Presser Foot Lift Height: 5.5-13mm Spm: 4500 Cbm: 650*250*470 Weight: 32/35 Power: 250W Features: 1) High speed and light weight 2) Automatic lubricating system 3) Can sew light to medium heavy material, such as knits and chemical fiber
TMI 135.2.2.200502 - Single Needle Flat Bed Industrial Lockstitch Sewing Machine TMI 2.2.200502 Product Details Needle No: 1 Stitch Length: 0-5mm Presser Foot Lift Height: 5.5-13mm Spm: 5000 Cbm: 600*230*550 Weight: 30/34 Power: 250W
TMI 135.3.3.200502 - Double Twin Needle With Split Needle Bar Lockstitch Sewing Machine TMI 3.3.200502 Product Details Needle Gauge: 3/8", 1/4" Needle No: 2 Needle Thread: 2 Presser Foot Lift Height: 7-13mm Spm: 5000 Cbm: 675*310*660 Weight: 43/48 Power: 400W
TMI 135.4.4.200502 - Direct Drive Computerized Double Synchronous Heavy Duty Lockstitch Sewing Machine TMI 4.4.200502 Product Details Heighten design in rear cover and cover axis design to avoid oil leakage and operating more safely. Adopt the Innovative direct drive, energy-saving servo motor directly connect to the main shaft, start fast and stop accurately, reducing the responsive time. 750W energy-saving servo motor, more powerful trimmer. Round knives, high-performance trimmer structural to ensure accurate trimming effect, the cut is flat. Have the functions of automatic trimmer, automatic needle positioning, automatic counting and automatic reverse sewing. Max Sewing Speed: 6500rpm Stitch Length: 8MM CBM: 470x330x480mm Power: 550W
TMI 135.5.1.200503 - Flat Bed Single Needle Compound Feed Industrial Lockstitch Sewing Machine TMI 5.1.200503 Product Details Applicable to stitching car seat cushions, safety belts, safety air bags, tents, parachutes, etc. Characteristics 1.Designed with large vertical rotating hooks for thread loop catching and sliding bars for thread up taking. 2.It has been sub-classed into single needle, two needle, single needle with under-trimmer and two needle with under trimmer. 3.The application of needle bearing for arm shaft and hook shaft, cog belt driving, plunger pump lubrication and compound feed by needle bar, presser foot and feed dog provides this series with such splendid features as smooth running. Max Sewing Speed: 2500rpm Stitch Length: 5MM Presser Lift: 8-16mm CBM: 675*275*470 Power: 400W
TMI 135.6.2.200503 - Direct Drive Single Needle Flat Bed Lockstitch Industrial Sewing Machine TMI 6.2.200503 Product Details Newly designed patterned appearance, extra width space convenient for the store of sewing materials, easy for operation. Self-lubricate design of take-up-lever mechanism to increase the service life. Adopt inside direct drive servo-motor system to improve the braking precision when quick start. Power saving up to 60% to reduce the cost. Transmission mechanism adopt oil pump automatic oil feeding system to ensure the lubrication when machine in high speed or low speed operation. Adopt inside wounding system to increase the efficiency. Auto safety switch devices to power off after the reverse running of the machine to ensure the safety when fixing and cleaning. Full reflect the product humanisation design idea. High-precision gear and main parts imported to comprehensively reduce the noise and improve the quality and extend the service life. Automatic trimming, automatic needle positioning, automatic needle counting, automatic reverse sewing counting, automatic thread wiping, etc available to ensure the smart sewing. More humanisation, more intellectualisation apply to all kinds of complex and highly difficult process, increase the efficiency. Max Sewing Speed: 5000spm Stitch Length: 5MM CBM: 680x245x523 Power: 250W
TMI 135.7.3.200503 - High Speed Industrial Double Needle Lockstitch Sewing Machine With Split Needle Bar TMI 7.3.200503 Product Details Max Sewing Speed: 4000rpm Max Sewing Thickness: 0-5mm Needle: DBX1 11#-14# CBM: 700*265*655 Power: 400W
TMI 135.8.4.200503 - High Speed Lockstitch Industrial Garment Sewing Machine With Cutter TMI 8.4.200503 Product Details Max Sewing Speed: 4500rpm Max Sewing Thickness: 3-10mm Stitch Length: 0-5mm CBM: 600*230*550 Power: 40W Weight: 36/42 Kg