TMI 45.15.6.200421 - Single Stack Coin Drying Machine Product Description Computer control easily. Cool down the drying material automatically for safe use. It is available to run in one-way direction and two-way direction. The machine is with wool fiber clean system, with cool and hot air choice programs, This can ensure the ideal drying effect, special for high grade clothes. Four heating models for choice: electric heating, steam heating, LPG gas heating, natural gas heating.
TMI 45.16.7.200421 - Single Stack Coin Drying Machine Product Description Computer control easily. Cool down the drying material automatically for safe use. It is available to run in one-way direction and two-way direction. The machine is with wool fiber clean system, with cool and hot air choice programs, This can ensure the ideal drying effect, special for high grade clothes. Four heating models for choice: electric heating, steam heating, LPG gas heating, natural gas heating.
Product Description The separator is used for cotton cleaning process and is directly installed in a conveying duct, which can detect and remove effectively the metal impurities and spark in textile fiber. It is an importance equipment for ensuring safety in production. Technical Specifications Power Source: AC220V 50HZ,60HZ Sensitivity: Spark-1mm,visual angle no less than 90 metal-no less than 2mm steel ball Response time: Millisecond level Cotton speed range in conveying duct: 5-18m/sec Dia. Of conveying duct: 300 mm
Fiber optic cable, patch cords, patch panels. racks and cabinets and industrial ups,.
TMI 70.1.1.200403 - DISK BALE PLUCKER New Spinning Machinery Product Description Disk plucker is an important equipment in blowing-carding joint machinery. It is suitable for each kind of raw cotton, cotton content chemical fiber, middle and long chemical fiber. Generally two set's of plucker are put into production in parallel. Plucking beater goes down the interval and rotates with carriage to pluck cotton in sequence. Cotton is plucked & transported to the next machine via duct. It Consists of a Flexible pipe, Carriage frame, Outer wall, Beater wall, Beater, Rail, Inner wall & Ring. Technical Specifications Production Output (kg/h): 800 - 1000 kg Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets) Outer Wall Diameter in mm: 4760 mm Inner Wall Diameter in mm: 1300 mm Speed of Carriage in r/min: 1.6 - 2.2 r/min Beater Speed in r/min: 740 r/min Blade extension from grid in mm: 2.5 - 7.5 mm Rail Diameter in mm: 5132 mm Total Height in mm: 3864 mm Power in Kw: 4.1 Kw Weight in Kg: Around 1600 Kg
TMI 12.4.200413 Product Description Rotor spinning machine is a kind of new-type open end spinning machine with some features such as high speed, high efficiency, automatic exhausting impurities. It can spin directly various short fibers, 40mm cut fibers or 60mm cut viscose into single fine yarn from combed sliver. This is a double-side-type spinning machine based on modularised design. It applies many new technologies such as air suction spin box, semi-automatic piecing-in, closed loop control etc. Max. rotor speed can reach 110000 rpm. Thanks to application of numerous new technologies, it holds spinning and winding quality close to full automatic rotor spinning machine, and then shows better price-performance ratio. Technical Specifications The minimum and max. tex: 120-150 (5s-36s) Suitable tex: 83.2-28 (7s-21s) Cotton to be fed: 2500-5000 Rotor speed (r/min): 100000 Yarn guiding speed m/min: 40-160 Splitting roll seppd: 5500-9000 Twisting degree: 220-2250 Pneumatic moto purging volume (m3/h): 5500 Suitable fiber length (mm): less than 40 Operating height (mm): 1560 Yarn feeding bobbin: outer dia: 400x914 Head space (mm): 230 Rotor diameter (mm): 400 or 40 Head number: 192 or 240 Bobbin specs (outer diameter*height)(mm): 54x170 Take-up specs (diameter*height): 300*150 Loaded weight (kg): 3 Crossing angle: 300,330,390,420 Yarn breaking (Filament per 1000 filament per hour): less than =50 Purification efficiency: 60-80 Pressure in rotor intra cavity: greater than = 5 Mechanical stretching times: 32-220 Tension stretching times: 0.93-1.06 Total power: 64kw
TMI 45.31.2.200425 - Automatic PCE Dry Cleaning Machine Product Description: The machine applies to hotels, restaurants, and shops, guest houses and other service industries of cotton, wool, chemical fiber and other washing clothes. After washing the clothes thoroughly clean greasy dirt, do not fade, no fold, does not shrink, not susceptible to damage, and can keep the original soft, crisp, bright luster. The dry cleaning machine to international current four vinyl chloride (C2CL4) as the washing liquid, decontamination capability, the electrical part of the selection of computer control panel, main components made of stainless steel or non-ferrous metal die stamping is refined, in the home - used hot galvanising technology, so that the machine's corrosion resistance greatly enhanced. The dry cleaning machine and absorption of foreign advanced technology, safe and reliable use, convenient operation and maintenance, is the ideal washing equipment.
TMI 45.35.2.200426 - Mushroom Shape Laundry Press Product Description This mushroom shape Laundry Press is ideal for finishing tapered areas,yokes,small areas of dresses,short sleeves,and other hard-to-reach parts. Two separate cylinders:one is to close the top portion,and another is to apply pressure.This keeps the efficiency of each cylinder at maximum for the longest possible time.Adopting the hydraulic buffer makes to close or open the die head smooth and reduce noise and vibration.The integral design of the gas circuit is very simple and easy. Pressing part is especially big and made of iron fiber and durable cotton cover as well as with colour coded push-button switch.Its features are beautifully designed, strong, high stability and providing ease of operation and maximum operator convenience.
Product Description Condenser is commonly used for the opening flow. Use blower and card pipe transmitting raw cotton or chemical fiber and the original cotton is condensed at the surface of dust cage with the suction of the blower and then stripped from it by beater, and go through the trash extraction of dust cage. Rich specifications for selection. Different power for different position in the flow. There are bypass devices at the top of this condenser and the raw cotton can be straightly transmitted to the next platform through this path. Technical Specifications Production kg/h: 800 Dust cage diameter mm: 500 Beater type: 6-Wing Blower diameter mm: 500 Blowing rate: Around 4500 General Power Kw: 4 Size (LxWxH) mm: 1721x800x1000 Machine weight kg: 600
Product Description Fine Opener is suitable for further opening and impurities removing of all classes of raw cotton, cotton chemical fiber and the middle to long chemical fibers shorter than 76mm. It mainly consists of cotton store and feeding construction that features strong opening and good effect of impurity removing. Technical Specifications Machine Type: TMI 60.5.1.200412a Production: 800 Kg/h Width: 1060 mm Beater type: Hedgehog Beater diameter mm: 610 Beater rotating speed r/mm: 480 Hopper roller diameter mm: 76 Hopper roller rotating speed r/mm: 35-39.45 Grate Bar Type: Triangle grid bar Adjusting type: Hand wheel out of machine General Power kw: 3.55 Size(LÃ??WÃ??H): 1810Ã??1650Ã??3875(including Condenser) Machine weight: 1800 Machine Type: TMI 60.5.1.200412b Production: 600 Kg/h Width: 1060 mm Beater type: Card wire roller Beater diameter mm: 600 Beater rotating speed r/mm: 540 Hopper roller diameter mm: 76 Hopper roller rotating speed r/mm: 35-39.45 Grate Bar Type: Triangle grid bar Adjusting type: Hand wheel out of machine General Power kw: 3.55 Size(LÃ??WÃ??H): 1810Ã??1650Ã??3875(including Condenser) Machine weight: 1800 Machine Type: TMI 60.5.1.200412c Production: 600 Kg/h Width: 1060 mm Beater type: Sawblade Beater diameter mm: 600 Beater rotating speed r/mm: 600 Hopper roller diameter mm: 76 Hopper roller rotating speed r/mm: 35-39.45 Grate Bar Type: Triangle grid bar Adjusting type: Hand wheel out of machine General Power kw: 3.55 Size(LxWxH): 1810x1650x3875(including Condenser) Machine weight: 1800
TMI 60.5.1.200412 - FINE OPENER Spinning Machinery Product Description Fine Opener is suitable for further opening and impurities removing of all classes of raw cotton, cotton chemical fiber and the middle to long chemical fibers shorter than 76mm. It mainly consists of cotton store and feeding construction that features strong opening and good effect of impurity removing. Technical Specifications Machine Type: TMI 60.5.1.200412a Production: 800 Kg/h Width: 1060 mm Beater type: Hedgehog Beater diameter mm: 610 Beater rotating speed r/mm: 480 Hopper roller diameter mm: 76 Hopper roller rotating speed r/mm: 35-39.45 Grate Bar Type: Triangle grid bar Adjusting type: Hand wheel out of machine General Power kw: 3.55 Size(L WH): 1810 X 1650 X 3875(including Condenser) Machine weight: 1800 Machine Type: TMI 60.5.1.200412b Production: 600 Kg/h Width: 1060 mm Beater type: Card wire roller Beater diameter mm: 600 Beater rotating speed r/mm: 540 Hopper roller diameter mm: 76 Hopper roller rotating speed r/mm: 35-39.45 Grate Bar Type: Triangle grid bar Adjusting type: Hand wheel out of machine General Power kw: 3.55 Size(LÃ??WÃ??H): 1810Ã??1650Ã??3875(including Condenser) Machine weight: 1800 Machine Type: TMI 60.5.1.200412c Production: 600 Kg/h Width: 1060 mm Beater type: Sawblade Beater diameter mm: 600 Beater rotating speed r/mm: 600 Hopper roller diameter mm: 76 Hopper roller rotating speed r/mm: 35-39.45 Grate Bar Type: Triangle grid bar Adjusting type: Hand wheel out of machine General Power kw: 3.55 Size(L X W X H): 1810 X 1650 X 3875(including Condenser) Machine weight: 1800
Computers, printers, peripherals, accessories and cables, consumer electronics and office equipment and supplies like laptops, desktops, allinones, printers, servers, accessories and more.
Product Description Automatic Cone winder inherits the advantages of a series winder, adopts brand-new profile design & is featured by beautiful and dignified features. It adopts the brand-new smart anti-pattering device, new type of tension control system and new type of balloon central mechanism to ensure perfect package building, more even winding tension, high machine operation stability and reliability to meet customer requirement. Technical Specifications Machine Type: Single Spindle, Single Sided, LH Machine or RH Machine Application: Single of Cotton, Wool, Man-made staple fiber or their blends, yarn counts from Nm 3.5 to the highest Winding Speed: 400 - 2200 m/min, Step less adjustable No. of Spindles: 12 - 54 Spindles, every 4 spindles one extension Spindle Pitch: 320 mm Package Taper: 3'30", 4'20", 5'57", 9'15" Feeding Packages:
TMI 13.1.200415 Product Description Rotor Frame machine is a three-shaft driven computerized type high speed suspend flyer roving frames that adopt the advanced computer numerical control technique, without cone drum structure, mechanical forming and direction transposition structures of former flyer frames. It's more simple and more reliable than former roving frames, all operations are controlled by inverter and PLC. Technical Specifications Suitable for square fiber length:60-200mm Drawing multiple :4-16 Viscosity range:10-40twist/m The scope of Article :0.3-1g/m Feeding range:5-15g/m Constant speed:the maximum mechanical speed 1200RPM Maximum process speed 900RPM Drafting system : A complete unit Chinese brand drafting system (spring weighting arm). Roller diameter(mm) : 28.5,28.5 Top roller diameter(mm) : 25,28 Drafting range : 4.2-12 Mechanical spindle speed(r/min): 1600 Twist range(twist/m) : 18.0-80 Bobbin dimensions (mm) : 45 445 Take up package dimensions (mm): 152 40
TMI 45.10.10.200418 - MULTIFUNCTIONAL OIL CLEANING WASHING DRYING MACHINE Product Description Both dry cleaning, but also washing, with drying function real machine! High speed, time-saving, energy-saving, significant cost savings! Unique with base. Not only to increase the stability of equipment operation, but also to reduce the production of cement pile of trouble, and at the same time, let you store floor no longer damaged. The automatic computer intelligent control, LCD screen displays at a glance, easy to operate; Frequency control, economic energy; Unique suspension system, noise damping, good stability; Cassette activated carbon filter, oil purifier, to taste the deacidification, sterilisation; The high-end fabrics and leather, hair-like clothes washed without damaging the fibers, not to hurt the cortex, soft, indented, not wrinkle. Technical Details Model: 45.10.10.200418a Laundry Capacity: 15 Kg/1.6s Drum Volume: 134 L Cleaning Speed: 34-38-42 Rpm Drying Speed: 112-700-840-950-1200 Rpm Total Power of the Machine: 3.5 Kw Machine Electric Heating Power: 3 Kw Machine Drying Power: 3.5 Kw Machine Size: 1700*1560*1140 mm Machine Weight: 680 Kg
TMI 45.8.8.200418 - AUTOMATIC HORIZONTAL INDUSTRY WASHER Product Description Industrial washing machines (industrial washing machines) suitable for washing all kinds of cotton, wool, hemp, chemical fiber blended fabrics and other clothing in garment factories, washing plants, industrial and mining enterprises, schools, hotels, hospitals, etc. This laundry machine's wide application is to reduce labor intensity and improve work efficiency. It is an ideal equipment in reducing energy consumption. The first came from the world's washing machine, industrial washing machine on hand in hand. Like the entire revolution has brought great changes. Today more and more automated washing machine are being used to cut down on variable costs and improve efficiency. â?? Technical Details Model: 45.8.8.200418a Rated Capacity: 30 Washing Rotation: 35 Clothes time: 30-40 (325) Motor Power: 1.1 Power Supply: 380 External Dimension: H: 1200 D: 1250 W: 1400 Machine Weight: 324 Model: 45.8.8.200418b Rated Capacity: 50 Washing Rotation: 35 Clothes time: 30-40 (600) Motor Power: 2.2 Power Supply: 380 External Dimension: H: 1400 D: 1400 â??W: 1500 Machine Weight: 450 Model: 45.8.8.200418c Rated Capacity: 70 Washing Rotation: 35 Clothes time: 30-40 (731) Motor Power: 3 Power Supply: 380 External Dimension: H: 1490 D: 1500 â??W: 1880 Machine Weight: 550
Product Description Horizontal washing machine: Industrial washing machines (industrial washing machines) suitable for washing all kinds of cotton, wool, hemp, chemical fiber blended fabrics and other clothing in garment factories, washing plants, industrial and mining enterprises, schools, hotels, hospitals, etc. This laundry machine's wide application is to reduce labor intensity and improve work efficiency. It is an ideal equipment in reducing energy consumption. The first came from the world's washing machine, industrial washing machine on hand in hand. Like the entire revolution has brought great changes. Today more and more automated washing machine are being used to cut down on variable costs and improve efficiency. Technical Details Model: 45.5.5.200418a Rated Capacity: 30 Washing Rotation: 35 Clothes time: 30-40 (325) Motor Power: 1.1 Power Supply: 380 External Dimension: H: 1200 D: 1250 W: 1400 Machine Weight: 324 Model: 45.5.5.200418b Rated Capacity: 50 Washing Rotation: 35 Clothes time: 30-40 (600) Motor Power: 2.2 Power Supply: 380 External Dimension: H: 1400 D: 1400 W: 1500 Machine Weight: 450 Model: 45.5.5.200418c Rated Capacity: 70 Washing Rotation: 35 Clothes time: 30-40 (731) Motor Power: 3 Power Supply: 380 External Dimension: H: 1490 D: 1500 W: 1880 Machine Weight: 550
Livestock.
Structured cabling, cctv, business telephone pabx, bio metric systems, cyber security, fiber optic cabling.
Fire resistant cables, fiber optic lightings, cold cathode lightings, flexible strip lightings, dimming & control system, sensors.Trading
